检索结果-南通市图书馆

Influence of the Addition of Cotton Stalk during Co-pyrolysis with Sewage Sludge on the Properties, Surface Characteristics, and Ecological Risks of Biochars

引用

Journal of Thermal Science 2019年第4期28卷 755-762页

作者： WANG Zhipu WANG Jian xie like ZHU Henan SHU Xinqian School of Chemical and Environmental Engineering China University of Mining & Technology (Beijing)Beijing 100083China School of Geosciences and Technology Southwest Petroleum UniversityChengdu 610500China Research Institute of Experiment and Detection of Xinjiang Oilfield Company Karamay 834000China Xinjiang Laboratory of Petroleum Reserve in Conglomerate Karamay 834000China

Sewage sludge produced by municipal sewage treatment plants can potentially be used as a biomass energy source because of its high organic ***,the conversion and utilization of rapidly growing amounts of sewage sludge represent an urgent challenge in *** conversion of sewage sludge to biochar through pyrolysis is a promising solution to this ***,biochar produced by pyrolysis of sewage sludge alone has a poor pore structure as a result of its low C content and high ash ***,it is enriched in heavy metals that may pose high ecological *** this study,we addressed these issues through co-pyrolysis of sewage sludge and cotton stalks(1:1,wt./wt.)at different pyrolysis temperatures ranging from 350℃ to 750℃.The properties and surface characteristics of the biochars were ***,the transformation behavior of heavy metals during the co-pyrolysis process was studied,and the potential ecological risks of heavy metals in biochars were *** results showed that elevated pyrolysis temperatures reduced the biochar yield and C content of the biochars,whereas such temperatures increased the pH value and ash content of the *** biochars prepared at different pyrolysis temperatures were all mesoporous *** elevated temperatures promoted the transformation of heavy metals from mobile fractions to stable ones,thus resulting in a significant decrease in the ecological *** summary,co-pyrolysis of sewage sludge with cotton stalks proved to be a feasible method for the conversion and utilization of sewage sludge.

关键词： co-pyrolysis sewage sludge cotton stalk biochar

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Flight safety oriented ice shape modulation using distributed plasma actuator units

引用

Chinese Journal of Aeronautics 2021年第10期34卷 1-5页

作者： Yun WU Biao WEI Hua LIANG like xie Zhe LI Yinghong LI Science and Technology on Plasma Dynamics Laboratory Air Force Engineering UniversityXi'an 710038China

Ice accretion on the wings seriously threatens the flight safety of an *** the perspectives of ensuring flight safety and saving power consumption,the ice shape modulation method using distributed plasma is *** plasma actuator units are designed to modulate the spanwise continuous ice at the leading edge into periodically segmented ice pieces,forming a wavy leading *** airfoil and scaled aircraft model,with continuous and modulated ice,are experimentally investigated and *** with the continuous ice,ice shape modulation can significantly improve the aerodynamic performance,flight control characteristics and flight *** method can save about half electric power,which is very beneficial for application.

关键词： Anti-icing Flight safety Flow control Icing wind tunnel Plasma actuator

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Improving aircraft aerodynamic performance with bionic wing obtained by ice shape modulation

引用

Chinese Journal of Aeronautics 2023年第2期36卷 76-86页

作者： like xie Hua LIANG Haohua ZONG Yun WU Yinghong LI Zhi SU Xuecheng LIU Science and Technology on Plasma Dynamics Laboratory Air Force Engineering UniversityXi'an 710038China School of Mechanical Engineering Xi'an Jiaotong UniversityXi'an 710049China

For Unmanned Aerial Vehicles(UAVs)with limited electrical power to achieve effectively anti-/de-icing at the leading edge of the wing,a strategy of ice shape modulation was *** simulated ice shape pieces printed by 3D printing technology are mounted on a NACA0012 finite wing model,and its lift/drag coefficients and suction-side velocity fields are measured by the six-component force balance and the Particle Imaging Velocimetry(PIV),*** ratio of the spanwise length of a single ice shape piece to chord length and the spanwise length of the non-icing area between the two adjacent single ice shape pieces are defined as dimensionless ice shape length(w/c)and dimensionless modulation ratio(w/λ),*** results indicate that for a fixed w/λ,the wing lift coefficient first increases and then drops with increasing w/c,and a peak value exists when w/c is between 0.1 and *** lower the w/λis,the higher the wing lift coefficient will *** periodical variation of the flow separation area along the spanwise direction is attributed on the one hand to the acceleration effect of the flow field in the non-icing area which reduces the separation area,and on the other hand to the cross-flow caused by the streamwise vortices from the non-icing area to the icing area which promotes the mixing of the flow field(similar to vortex generators).The obtained modulation law is verified through flight tests and provides guidance for the use of ice shape modulation scheme for UAVs that cannot be completely anti-/deicing under severe weather conditions.

关键词： Dimensionless ice shape length Dimensionless modulation ratio Ice shape modulation NACA0012 finite wing Particle imaging velocimetry(PIV) Unmanned aerial vehicles(UAVs)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Minimizing airfoil drag at low angles of attack with DBD-based turbulent drag reduction methods

引用

Chinese Journal of Aeronautics 2023年第4期36卷 104-119页

作者： Zhi SU Haohua ZONG Hua LIANG Jun LI like xie Xuecheng LIU Weiliang KONG Borui ZHENG Science and Technology on Plasma Dynamics Laboratory Air Force Engineering UniversityXi’an 710038China Institute of Aero-engine School of Mechanical EngineeringXi’an Jiaotong UniversityXi’an 710049China The Green Aerotechnics Research Institute of Chongqing Jiaotong University Chongqing 404100China

Dielectric Barrier Discharge(DBD)based turbulent drag reduction methods are used to reduce the total drag on a NACA 0012 airfoil at low angels of *** interaction of DBD with turbulent boundary layer was investigated,based on which the drag reduction experiments were *** results show that unidirectional steady discharge is more effective than oscillating discharge in terms of drag reduction,while steady impinging discharge fails to finish the mission(*** increase).In the best scenario,a maximum relative drag reduction as high as 64%is achieved at the freestream velocity of 5 m/s,and a drag reduction of 13.7%keeps existing at the freestream velocity of 20 m/*** unidirectional discharge,the jet velocity ratio and the dimensionless actuator spacing are the two key parameters affecting the *** drag reduction magnitude varies inversely with the dimensionless spacing,and a threshold value of the dimensionless actuator spac-ing of 540(approximately five times of the low-speed streak spacing)exists,above which the drag *** the jet velocity ratio smaller than 0.05,marginal drag variation is *** con-trast,when the jet velocity ratio larger than 0.05,the experimental data bifurcates,one into the drag increase zone and the other into the drag reduction zone,depending on the value of dimensionless actuator *** both zones,the drag variation magnitude increases with the jet velocity *** total drag reduction can be divided into the reduction in pressure drag and turbulent friction drag,as well as the increase in friction drag brought by transition *** reduction in tur-bulent friction drag plays an important role in the total drag reduction.

关键词： Dielectric barrier discharge Dimensionless scaling Plasma actuator Turbulent friction drag Wake

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Improving flight performance of UAVs by ice shape modulation

引用

Chinese Journal of Aeronautics 2024年第8期37卷 49-62页

作者： Jiajun ZHANG Xuecheng LIU Hua LIANG like xie Biao WEI Haohua ZONG Yun WU Yinghong Li National Key Lab of Aerospace Power System and Plasma Technology Air Force Engineering UniversityXi’an 710038China Institute of Aero-Engine School of Mechanical EngineeringXi’an Jiaotong UniversityXi’an 710049China

Aircraft icing poses a great threat to flight *** response to the characteristics of high-power consumption,large volume,and heavy weight of traditional anti-/de-icing technologies,the concept of ice shape modulation is proposed,which is called ice tolerant ***,the flight performance of Unmanned Aerial Vehicle(UAV)was compared in three states:no ice,full ice,and modulated ice through flight *** was found that ice shape modulation has a significant improvement effect on the aerodynamic performance of aircraft under icing *** the three modulated ice shape conditions in this experiment,the lift coefficient of the UAV under different ice shape modulation conditions increased by 18%–33%,and the stalling angle was delayed by 3°-5°.Subsequently,the pressure distribution,streamlines in the flow field,and detached vortex distribution of the UAV model in these three states were obtained through numerical simulation,to study the mechanism of ice shape modulation on the aerodynamic performance of *** simulation found that the reason for the improvement of the wings effect after ice shape modulation is that the modulated area forms a leading-edge protrusion structure similar to a vortex *** structure prolongs the mixed flow region on the wings surface and reduces the trend of flow separation,which plays a role in increasing lift and reducing drag for UAVs under icing ***,a reverse reachable set that can be used for unexpected state recovery is used as the definition of flight safety boundaries,and an aircraft dynamics model is established to obtain flight safety boundaries for different *** has found that the flight safety boundary of the UAV in a no ice state is greater than that in a modulated ice state,and the safety boundary in a modulated ice state is greater than that in a full ice *** with the full ice state,the flight safety boundary after modulation has expanded by 27.0%.The sch

关键词： Ice shape modulation Aerodynamic performance Reachable set Flight safety UAV

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Parametric study of high-frequency characteristics of plasma synthetic jet actuator

引用

Plasma Science and Technology 2021年第12期23卷 140-149页

作者： Guozheng SONG Haohua ZONG Hua LIANG Zhi SU like xie Xing ZHENG Science and Technology on Plasma Dynamics Laboratory Air Force Engineering UniversityXi'an 710038People's Republic of China School of Mechanical Engineering Xi'an Jiaotong UniversityXi'an 710049People's Republic of China

A major issue of plasma synthetic jet actuator(PSJA)is the severe performance deterioration at high working *** this study,experiments and numerical simulation are combined together to investigate the influence of thermal conductivity,throat length(Lth)and discharge duration(Td)on the high-frequency characteristics of *** show that the variation of the actuator thermal conductivity and discharge duration will not alter the saturation frequency of the actuator,whereas decreasing the throat length results in an increase of the saturation *** a short-duration capacitive discharge of 1.7μs,a clear shock wave is issued from the orifice,followed by a weak *** a comparison,when the discharge duration is increased up to 202.6μs,a strong jet column is formed and no obvious shock wave can be *** on numerical simulation results,it becomes clear that the long-duration pulse-DC discharge is able to heat the cavity gas to a much higher temperature(3141 K)than capacitive discharge,greatly improving the conversion efficiency of the arc discharge energy to the internal energy of the cavity *** addition,high-speed Schlieren imaging is deployed to study the performance degradation mechanism of PSJA at high working *** of the exit jet grayscale indicates that as long as the saturation frequency is exceeded,the actuator becomes unstable due to insufficient refresh *** higher the discharge frequency,the more frequently the phenomenon of‘misfires’will occur,which explains well the decaying jet total pressure at above saturation frequency.

关键词： thermal conductivity throat length discharge duration plasma synthetic jet saturation frequency

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental study on plasma actuation characteristics of nanosecond pulsed dielectric barrier discharge

引用

Plasma Science and Technology 2022年第1期24卷 129-138页

作者： Hao ZHENG Hua LIANG Jie CHEN Haohua ZONG Xiangzhe MENG like xie Yinghong LI Science and Technology on Plasma Dynamics Laboratory Air Force Engineering UniversityXi'an 710038People’s Republic of China Chinese Flight Test Establishment Xi’an 710089People’s Republic of China School of Mechanical Engineering Xi’an Jiaotong UniversityXi’an 710049People’s Republic of China

Combining high-speed schlieren technology and infrared imaging technology,related research has been carried out on the influence of parameters such as actuation voltage,repetition frequency,and electrode size of an actuator on the discharge characteristics,induced flow field characteristics,and thermal characteristics of nanosecond pulsed dielectric barrier *** results show that increasing the value of the actuation voltage can significantly increase the actuation intensity,and the plasma discharge area is significantly *** the repetition frequency can increase the number of discharges per unit *** will cause more energy input and induce more changes in the flow *** effect of temperature rise is more *** width of the covered electrode will affect the potential distribution during the discharge process,which in turn will affect the extension process of the plasma discharge *** the same actuation intensity,the wider the covered electrode,the larger range the induced flow field and temperature rise *** experimental analyses of high-frequency actuation characteristics,temperature field characteristics,flow field characteristics and actuation parameter settings provide support for the parameter selection and partial mechanism analysis of plasma anti-icing.

关键词： NS-DBD actuation voltage repetition frequency induced flow field temperature rise

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Control of flow separation over a wing model with plasma synthetic jets

引用

Plasma Science and Technology 2022年第6期24卷 135-147页

作者： Zhi SU Guozheng SONG Haohua ZONG Hua LIANG Jun LI like xie Xuecheng LIU Weiliang KONG Science and Technology on Plasma Dynamics Laboratory Air Force Engineering UniversityXi'an 710038People's Republic of China Institute of Aero-Engine School of Mechanical EngineeringXi’an Jiaotong UniversityXi'an 710049People's Republic of China The Green Aerotechnics Research Institute of Chongqing Jiaotong University Chongqing 404100People's Republic of China

An array of 30 plasma synthetic jet actuators(PSJAs)is deployed using a modified multichannel discharge circuit to suppress the flow separation over a straight-wing *** lift and drag of the wing model are measured by a force balance,and the velocity fields over the suction surface are captured by a particle imaging velocimetry *** show that the flow separation of the straight wing originates from the middle of the model and expands towards the wingtips as the angle of attack *** flow separation can be suppressed effectively by the PSJAs *** best flow control effect is achieved at a dimensionless discharge frequency of F^+=1,with the peak lift coefficient increased by 10.5%and the stall angle postponed by 2°.To further optimize the power consumption of the PSJAs,the influence of the density of PSJAs on the flow control effect is investigated.A threshold of the density exits(with the spanwise spacing of PSJAs being 0.2 times of the chord length in the current research),below which the flow control effect starts to deteriorate *** addition,for comparison purposes,a dielectric barrier discharge(DBD)plasma actuator is installed at the same location of the *** the same power consumption,4.9%increase of the peak lift coefficient is achieved by DBD,while that achieved by PSJAs reaches 5.6%.

关键词： flow separation plasma synthetic jet density dielectric barrier discharge

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental investigation on de-icing by an array of impact rod-type plasma synthetic jets

引用

Plasma Science and Technology 2023年第3期25卷 138-149页

作者：刘雪城梁华宗豪华谢理科苏志 Science and Technology on Plasma Dynamics Laboratory Air Force Engineering UniversityXi’an 710038People’s Republic of China School of Mechanical Engineering Xi’an Jiaotong UniversityXi’an 710049People’s Republic of China

Since flight accidents due to aircraft icing occur from time to time,this paper proposes an array of impact rod-type plasma synthetic jet de-icing methods for aircraft icing *** impact rod-type plasma synthetic jet actuator(PSJA)is based on the traditional PSJA with an additional impact rod structure for better de-icing in the flight *** this work,we first optimize the ice-breaking performance of a single-impact rod-type PSJA,and then conduct an array of impact rod-type plasma synthetic jet ice-breaking experiments to investigate the relationship between crack expansion and discharge energy,ice thickness and group *** results show that the impact force and impulse of a single-impact rod-type PSJA are proportional to the discharge energy,and there exists a threshold energy Qmin for a single actuator to break the ice,which is proportional to the ice *** when the discharge energy reaches above Qmin can the ice layer produce cracks,and at the same time,the maximum radial crack length produced during the ice-breaking process is proportional to the discharge *** the ice is broken by an array of impact rod PSJAs,the discharge energy and group spacing together determine whether the crack can be extended to the middle region of the *** the group spacing is certain,increasing the energy can increase the intersection of cracks in the middle region,and the ice-fragmentation degree is increased and the ice-breaking effect is *** the same time,the energy estimation method of ice breaking by an array of impact rod-type PSJAs is proposed according to the law when a single actuator is breaking ice.

关键词： plasma de-icing plasma synthesis jet force measurement high-speed photography ice cracks

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

视网膜分支静脉阻塞继发黄斑水肿的治疗进展

引用

眼科新进展 2020年第9期40卷 879-884页

作者：明静谢立科秦睿中国中医科学院眼科医院白内障眼病2科北京市100040

黄斑水肿(macular edema,ME)是视网膜分支静脉阻塞(branch retinal vein occlusion,BRVO)的常见并发症,也是导致视力下降的主要原因。目前,BRVO继发ME的治疗主要包括黄斑格栅样激光光凝和玻璃体内注射激素或抗血管内皮生长因子药物。激... 详细信息

黄斑水肿(macular edema,ME)是视网膜分支静脉阻塞(branch retinal vein occlusion,BRVO)的常见并发症,也是导致视力下降的主要原因。目前,BRVO继发ME的治疗主要包括黄斑格栅样激光光凝和玻璃体内注射激素或抗血管内皮生长因子药物。激素类药物主要包括曲安奈德和地塞米松玻璃体植入剂,抗血管内皮生长因子药物包括雷珠单抗、贝伐单抗、阿柏西普、康柏西普。玻璃体切割术是BRVO继发ME一种有前景的治疗方法。

关键词：视网膜分支静脉阻塞黄斑水肿治疗

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：