检索结果-南通市图书馆

Boosting Photocatalytic Performance of Cu-Mn Co-doped CeO_(2) Nanoparticles for Tetracycline Degradation

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 42-48页

作者： XU Rongqi MI Jianxin WANG Shulin XU Man ZHU Li BAI lei TANG Dandan lei Yu Engineering Research Center of Environmental Materials and Membrane Technology of Hubei Province School of Materials Science and EngineeringWuhan Institute of TechnologyWuhan 430205China Shaanxi Coal Chemical Industry Technology Research Institute Co. Ltd.Xi’an 710100China

Cu-Mn co-doped CeO_(2) photocatalyst was successfully synthesized by the sol-gel method to assess its capability in degrading *** and TEM results showed that Cu and Mn were successfully co-doped into CeO_(2) without forming heterostructure,XPS and photoelectrochemical results revealed that Mn ions doping amplified the generation of photo-induced charge carriers,while Cu ions doping significantly fa.ilitated the interfa.ial charge transfer ***,the optimized Cu3Mn2CeO_(2) nanoparticles exhibited the highest TC removal efficiency,achieved a rate of 78.18%and maintained a stable cycling performance.

关键词： photocatalyst co-doped charge separation water treatment

Adaptive-basis decomposition-based low-rank network for efficient non-uniform motion deblurring

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Optoelectronics Letters 2025年第1期21卷 43-50页

作者： CHEN lei XIONG Qingbo ZHANG Wei LI Runde School of Software Henan University School of Applied Technology China University of Labor Relations

In this study, we present a unified sparsity-driven framework that significantly enhances motion deblurring performance by integrating two key components: a custom-designed dataset and a low-rank module(LRM). This framework leverages the inherent sparsity of per-pixel blur kernels to bolster both deblurring accuracy and model interpretability. Firstly, we propose an adaptive-basis decomposition-based deblurring(ADD) approach, which constructs a tailored training dataset to enhance the generalization capacity of the deblurring network. The ADD framework adaptively decomposes motion blur into sparse basis elements, effectively addressing the intricacies associated with non-uniform blurs. Secondly, an LRM is proposed to improve the interpretability of deblurring models as a plug-and-play module, primarily designed to identify and harness the intrinsic sparse features in sharp images. A series of ablation studies have been conducted to substantiate the synergistic advantages of combining the proposed ADD with the LRM for overall improvement in deblurring efficacy. Subsequently, we empirically demonstrate through rigorous experimentation that incorporating the LRM into an existing Uformer network leads to substantial enhancement in reconstruction performance. This integration yields a sparsity-guided low-rank network(SGLRN). Operating under the overarching principle of sparsity, SGLRN consistently outperforms state-of-the-art methods across multiple standard deblurring benchmarks. Comprehensive experimental results, assessed through quantitative metrics and qualitative visual evaluations, provide compelling evidence of its effectiveness. The overall deblurring results are available at Google Drive.

关键词： Image enhancement

Force and impulse multi-sensor based on flexible gate dielectric field effect transistor

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 214-220页

作者： Chao Tan Junling Lü Chunchi Zhang Dong Liang lei Yang Zegao Wang College of Materials Science and Engineering Sichuan UniversityChengdu 610065China The 54th Research Institute of China Electronics Technology Group Corporation Shijiazhuang 050081China

Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other ***-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate ***,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of *** we fa.ricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor *** systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion fa.tors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 *** sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on ***,there was almost no performance loss for the device as left in the air for two months.

关键词： flexible gate dielectric transistor force sensor impulse sensor force sensor array

维普期刊数据库

Computational protein design and structure prediction—the 2024Nobel prize in chemistry

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2025年

作者： Peilong Lu lei Liu School of Life Sciences and Research Center for Industries of the Future Westlake University Tsinghua-Peking Joint Center for Life Sciences Ministry of Education Key Laboratory of Bioorganic Phosphorus Chemistry and Chemical Biology Center for Synthetic and Systems Biology Department of Chemistry Tsinghua University

The 2024 Nobel prize in chemistry recognizes groundbreaking advancements in protein science, highlighting the power of artificial intelligence (AI) to decipher and design the molecular machinery of life. Half of the prize was awarded to David Baker for the computational design of proteins; the other to Demis Hassabis and John Jumper for their AI-driven predictions of protein structures. This article briefly reviews their achievements, and discusses the opportunities and directions that their work has enabled (Figure1).

关键词：

Effects of the extrusion parameters on microstructure,texture and room temperature mechanical properties of extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 136-146页

作者： Chenjin Zhang Guangyu Yang lei Xiao Zhiyong Kan Jing Guo Qiang Li Wanqi Jie State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China College of Materials Science and Engineering Fuzhou UniversityFuzhou 350108China College of Chemistry and Environmental Science Qujing Normal UniversityQujing 655011China

Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed *** dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)*** the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical-rare-earth(RE)*** alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening *** results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.

关键词： Mg-rare earth alloys extrusion temperature extrusion ratio extrusion speed strengthening mechanisms

维普期刊数据库

Fluorinated poly(p-triphenylene isatin) anion exchange membranes based on hydrophilic hydroxyl side chain modulation for fuel cells

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 702-709页

作者： Yiman Gu Yanchao Zhang Zhanyu Li Yijia lei Baozeng Sun Xiaoyu Yu Zhe Wang College of Chemistry and Life Science Changchun University of Technology College of Chemical Engineering Changchun University of Technology School of Materials Science and Engineering Changchun University of Technology Key Laboratory of Advanced Functional Polymer Membrane Materials of Jilin Province

The development of alkaline fuel cells is moving forward at an accelerated pace,and the application of ether-free bonded polymers to anion exchange membranes （AEMs） has been widely ***,the question of the“trade-off”between AEM ionic conductivity and dimensional stability remains *** strategy of inducing microphase separation to improve the performance of AEM has attracted much attention recently,but the design of optimal molecular structures is still being ***,this work introduced different ratios of 3-bromo-1,1,1-trifluoroacetone （x=40,50,and 60） into the main chain of poly（p-terphenylene isatin）.Because fluorinated groups have excellent hydrophobicity,hydrophilic hydroxyl-containing side chains are introduced to jointly adjust the formation of phase separation *** results show that PTI-PTF50-NOH AEM with the appropriate fluorinated group ratio has the best ionic conductivity and alkali stability under the combined effect of *** has an ionic conductivity of 133.83 mS cm-1at 80°*** addition,the OH-conductivity remains at 89%of the initial value at 80°C and 3 M KOH for 1056 h of *** cell polarization curve based on PTI-PTF50-NOH shows a power density of 734.76 mW cm-2at a current density of 1807.7 mA cm-2.

关键词： Potassium hydroxide

CaH2-promoted activity of Ni-carbonate interfa.e for CO2 methanation

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 522-532页

作者： Jin-Peng Wang Guo-Cui Mao Hui-Lin Jiang Bao-Xia Dong Yun-lei Teng School of Chemistry and Chemical Engineering Yangzhou University

Transition metal-carbonate interfa.es often act as active sites in heterogeneous catalytic *** interfa.e between transition metal and metal carbonate exhibits a dynamic equilibrium during the CO2hydrogenation reaction,involving surfa.e carbonate hydrogenation and ***,there have been few reports on engineering the activity of the interfa.e between transition metal and alkaline earth metal carbonate for catalytic *** work demonstrated that the incorporation of CaH2in Ni/CaCO3enhances the CO2methanation activity of the *** CO2conversion for Ni/CaH2-CaCO3reached 68.5%at 400°C,which was much higher than that of the Ni/CaCO3（31.6%） and Ni/CaH2-CaO （42.4%） ***,the Ni/CaH2-CaCO3catalysts remained stable during the stability test for 24 h at 400°C and 8 *** research revealed that CaH2played a crucial role in promoting the activity of the Ni-carbonate interfa.e for ***2could modify the electronic structure of Ni and tune the structural properties of CaCO3to generate medium basic sites （OH groups）,which are fa.orable for the activation of H2and ***-situ Fourier transform infrared spectroscopy （FTIR） analysis combined with density functional theory calculations demonstrated that CO2activation occurs at the hydroxyl group （OH） on the CaH2-modified Ni-carbonate surfa.e,leading to the formation of CO3H****,our study has confirmed that CO2methanation over the Ni/CaH2-CaCO3catalysts proceeds via the formate pathway.

关键词： CO 2 methanation Metal hydride Ni catalysts Carbonate Metal-carbonate interfa.e

Discrete Numerical Study on Type II Fracture of Partially Detached Concrete Panels in Cold Region

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Structural Durability & Health Monitoring 2025年第1期19卷 167-191页

作者： Huayi Zhang Maobin Song lei Shen Nizar fa.sal Alkayem Maosen Cao College of Water Conservancy and Hydropower Engineering Hohai UniversityNanjing210024China Haihe River Huaihe River and Xiaoqinghe River Basin Water Conservancy Management and Service Center of Shandong ProvinceJinan250100China College of Mechanics and Engineering Science Hohai UniversityNanjing211100China

When the upper chord beam of the beam-string structure(BSS)is made of concrete-ﬁlled steel tube(CFST),its overall stiffness will change greatly with the construction of concrete placement,which will have an impact on the design of the tensioning plans and selection of control measures for the *** order to accurately obtain the bending stiffness of CFST beam and clarify its impact on the mechanical properties of composite BSS during con-struction,the inﬂuence of some fa.tors such as height-width ratio,wall thickness of steel tube,elasticity modulus of concrete,and friction coefﬁcient on the bending stiffness are analyzed parametrically by the numerical simula-tion technology based on an actual *** calculation formula of the equivalent bending stiffness of CFST is also established through mathematical statistical ***,the equivalent bending stiffness is introduced into the construction and use stages of the composite BSS,respectively,and the mechanical properties such as prestress-tensioning control value,structural deformation,and internal force of key members are comparatively analyzed when adopting two different construction ***,the optimal construction plan of concrete placementﬁrst and then prestress-tensioning is proposed.

关键词： Beam-string structure(BSS) concrete-ﬁlled steel tube(CFST) bending stiffness timing of concrete placement prestress-tensioning

Joint Probabilistic Scheduling and Resource Allocation for Wireless Networked Control Systems

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2025年第1期 258-260页

作者： Meng Zheng lei Zhang Wei Liang IEEE the State Key Laboratory of Robotics and the Key Laboratory of Networked Control Systems Shenyang Institute of Automation Chinese Academy of Sciences the University of Chinese Academy of Sciences

Dear Editor,This letter presents a joint probabilistic scheduling and resource allocation method(PSRA) for 5G-based wireless networked control systems(WNCSs). As a control-aware optimization method, PSRA minimizes the linear quadratic Gaussian(LQG) control cost of WNCSs by optimizing the activation probability of subsystems, the number of uplink repetitions, and the durations of uplink and downlink phases. Simulation results show that PSRA achieves smaller LQG control costs than existing works.

关键词：