检索结果-南通市图书馆

Effects of Number of Bleed Holes on Shock-Wave/Boundary-Layer Interactions in a Transonic Compressor Stator

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 611-624页

作者： LI Bai ZHOU Xun luo Lei DU Wei School of Energy Science and Engineering Harbin Institute of TechnologyHarbin150001China

An extensive numerical investigation is conducted to characterize the flow separation control in a transonic compressor cascade with a porous *** bleed holes are arranged on the suction surface in a single row,two staggered rows and three staggered *** each bleed scheme,five bleed pressure ratios are examined at an inlet Mach number of *** results indicate that the aerodynamic performance of the cascade is significantly improved by the porous *** the single-row scheme,the maximum reduction in total pressure losses is 57%.For the two-staggered-row and three-staggered-row schemes,there is an optimal bleed pressure ratio of 1.0,and the maximum reductions in total pressure loss are 68% and 75%,*** low loss in the cascade is due to the well-controlled boundary *** new local supersonic region created by the bleed hole is the key reason for the improved boundary *** vortex induced by side bleeding provides another mechanism for delaying flow *** the bleed holes could create multiple local supersonic regions,which reduce the range of the adverse pressure gradient that the boundary layer needs to *** is the reason why cascades with more bleed holes perform better.

关键词： transonic compressor stator shock wave/boundary layer interaction porous bleed number of bleed holes

Short-time maritime target detection based on polarization scattering characteristics

在线全文

学校读者我要写书评

暂无评论

Journal of Systems Engineering and Electronics 2024年第1期35卷 55-64页

作者： CHEN Shichao luo Feng TIAN Min LYU Wanghan College of Computer and Information Engineering(College of Artificial Intelligence) Nanjing Tech UniversityNanjing 211816China Hangzhou Institute of Technology Xidian UniversityHangzhou 311200China

In this paper,a detection method combining Cameron decomposition based on polarization scattering characteristics in sea clutter background is ***,the Cameron decomposition is exploited to fuse the radar echoes of full polarization channels at the data *** to the artificial material structure on the surface of the target,it can be shown that the non-reciprocity of the target cell is stronger than that of the clutter ***,based on the analysis of the decomposition results,a new feature with scattering geometry characteristics in polarization domain,denoted as Cameron polarization decomposition scattering weight(CPD-SW),is extracted as the test statistic,which can achieve more detailed descriptions of the clutter scattering characteristics utilizing the difference between their scattering ***,the superiority of the proposed CPD-SW detector over traditional detectors in improving detection performance is verified by the IPIX measured dataset,which has strong stability under short-time observation in threshold detection and can also improve the separability of feature space zin anomaly detection.

关键词： sea clutter small target radar detection Cameron decomposition characteristics analysis

Photoinduced superlubricity on TiO_(2) surfaces

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第3期12卷 428-438页

作者： Ke HAN Liran MA Yu TIAN Jianbin luo State Key Laboratory of Tribology in Advanced Equipment Tsinghua UniversityBeijing 100084China Received:16 September 2022/Revised:28 October 2022/Accepted:27 December 2022The author(s)2022.

Superlubricity control is of great interest in both industry and scientific research,and several methods have been proposed to achieve this *** this work,ultraviolet(UV)light was introduced into titanium dioxide(TiO_(2))and silicon nitride(Si_(3)N_(4))tribosystems to accomplish photoinduced *** friction coefficients(COFs)between Si_(3)N_(4) balls and TiO_(2) plates in the mixtures of sulfuric acid(H^(2)SO_(4))solution and glycerol solution were obviously reduced,and the system entered the superlubricity region(COF<0.01)after UV illumination at a speed of 56 mm/***,the COF was much larger without UV treatment than that with UV *** formation of silica(SiO_(2))layers on the surfaces of Si_(3)N_(4) balls and the elastohydrodynamic effects were determined to be fundamental to the low friction in this experiment,and the enhancement of the combination between the TiO_(2) surface and the hydroxy group of glycerol by UV illumination was the key to the photoinduced superlubricity in this *** findings showed one method for achieving superlubricity by introducing a light field that could be further applied to special working conditions.

关键词： light control friction superlubricity glycerol titanium dioxide(TiO_(2))

AWells-Riley/based COVID-19 infectiousrisk assessment model combining both short rangeandroom scale effects

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Building Simulation 2024年第1期17卷 93-111页

作者： Yinshuai Feng Yifan Fan Xiaoyu luo Jian Ge College of Civil Engineering and Architecture Zhejiang UniversityHangzhouChina Center for Balance Architecture Zhejiang UniversityHangzhouChina International Research Center for Green Building and Low-Carbon City International CampusZhejiang UniversityHainingChina

There is growing evidence of the high transmission potential of COVID-19 through virus-laden *** aerosols are inhaled in various concentrations,an overall assessment of transmission risks at different indoor scales is ***,a comprehensive risk assessment method that evaluates the direct link between short-range and room-scale zones is stl *** this paper,a risk assessment model combining both short-range and room-scale effects is developed to obtain effective reproduction number in confined indoor environments,called Turbulent Jet Wells Riley(TJWR)*** with the viral load data and aerosol generation data of different human respiratory activities,the Monte Carlo simulation method is applied to calculate the quanta emission rate,which further provides the input parameters of the TJWR *** known outbreaks(Hangzhou banquet hall X,Guangzhou restaurant Y,and Hong Kong restaurant Z,China)are chosen to validate the TJWR *** show that the TJWR model is more efficient than the original Wells-Riley *** average relative error of the TJWR model ranges between 9%and 44%,while for the Wells-Riley model,it ranges between 57%and 78%.The TJWR model also proves that infection risk assessments using the well-mixed assumption can systematically underestimate the transmission risk for those close to the ***,there is a significant positive linear correlation between the total number of exposed individuals at the short-range and the effective reproduction *** newly developed TJWR model has great potential for rapid and real-time overall airborne transmission risk assessment in buildings and cities.

关键词： COVID-19 airborne transmission infection risk Wells-Riley model Monte Carlo simulation

Elucidating the structure-activity relationship of Cu-Ag bimetallic catalysts for electrochemical CO_(2) reduction

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第6期93卷 345-351,I0009页

作者： Qining Huang Lili Wan Qingxuan Ren Jingshan luo Institute of Photoelectronic Thin Film Devices and Technology State Key Laboratory of Photovoltaic Materials and CellsKey Laboratory of Photoelectronic Thin Film Devices and Technology of TianjinMinistry of Education Engineering Research Center of Thin Film Photoelectronic TechnologyNankai UniversityTianjin 300350China Frontiers Science Center for New Organic Matter Nankai UniversityTianjin 300071China Haihe Laboratory of Sustainable Chemical Transformations Tianjin 300192China

Developing bimetallic catalysts is an effective strategy for enhancing the activity and selectivity of electrochemical CO_(2) reduction reactions,where understanding the structure-activity relationship is essential for catalyst ***,we prepared two Cu-Ag bimetallic catalysts with Ag nanoparticles attached to the top or the bottom of Cu *** tested in a flow cell,the Cu-Ag catalyst with Ag nanoparticles on the bottom achieved a faradaic efficiency of 54%for ethylene production,much higher than the catalyst with Ag nanoparticles on the *** catalysts were further studied in the H-cell and zero-gap MEA *** was found that placing the two metals in the intensified reaction zone is crucial to triggering the tandem reaction of bimetallic *** work elucidates the structure-activity relationship of bimetallic catalysts for CO_(2) reduction and demonstrates the importance of considering both catalyst structures and cell characteristics to achieve high activity and selectivity.

关键词： Electrochemical CO_(2)reduction Bimetallic catalyst Cu-Ag Structure-activity relationship

New structure transistors for advanced technology node CMOS ICs

在线全文

学校读者我要写书评

暂无评论

National Science Review 2024年第3期11卷 24-41页

作者： Qingzhu Zhang Yongkui Zhang Yanna luo Huaxiang Yin Integrated Circuit Advanced Process R&D Center Institute of Microelectronics of Chinese Academy of Sciences(IMECAS) State key Lab of Fabrication Technologies for Integrated Circuits Institute of Microelectronics of Chinese Academy of Sciences School of Integrated Circuits University of Chinese Academy of Sciences

Over recent decades, advancements in complementary metal-oxide-semiconductor integrated circuits(ICs)have mainly relied on structural innovations in transistors. From planar transistors to the fin field-effect transistor(FinFET) and gate-all-around FET(GAAFET), more gate electrodes have been added to three-dimensional(3D) channels with enhanced control and carrier conductance to provide higher electrostatic integrity and higher operating currents within the same device footprint. Beyond the 1-nm node, Moore's law scaling is no longer expected to be applicable to geometrical shrinkage. Vertical transistor stacking, e.g. in complementary FETs(CFET), 3D stack(3DS) FETs and vertical-channel transistors(VFET), for enhanced density and variable circuit or system design represents a revolutionary scaling approach for sustained IC development. Herein, innovative works on specific structures, key process breakthroughs, shrinking cell sizes and design methodologies for transistor structure research and development are reviewed. Perspectives on future innovations in advanced transistors with new channel materials and operating theories are also discussed.

关键词： transistor CMOS GAAFET CFET 3DS FET

Gear walk instability caused by brake-disc friction characteristics

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第2期37卷 343-359页

作者： Xiaoqiong DU Bin LI Wen CAI Linyin luo School of Aeronautics Northwestern Polytechnical UniversityXi’an 710072China Department of Mechanical Engineering University of MichiganAnn Arbor 48109USA AVIC General Huanan Aircraft Industry Co.Ltd. Zhuhai 519040China

A multi-body dynamic rigid-flexible coupling model of landing gear is established to study the gear walk instability caused by the friction characteristics of the brake *** validating the model with the experimental results,the influence of the landing gear structure and braking system parameters on gear walk is further *** the above factors,the slope of the graph for the friction coefficient of the brake disc and the relative velocity of brake stators and rotors is the most influential factor on gear walk *** trajectory analysis verifies that gear walk occurs when the coupling of multiple factors causes the system to exhibit an equivalent negative damping *** consider a more realistic braking case,a back propagation neural network method is employed to describe the nonlinear behavior of the friction coefficient of the brake *** the realistic nonlinear model of the friction coefficient,the maximum error in predicting the braking torque is less than 10%and the effect of the brake disc temperature on gear walk is *** results reveal that a more negative friction slope may contribute to a more severe unstable gear walk,and reducing the braking pressure is an effective approach to avoid gear walk,which provides help for future braking system design.

关键词： Gear walk Friction characteristics of brake disc Brake-induced vibration Negative damping Rigid-flexible coupling Negative slope of braking torque

Constructions of optimal binary locally repairable codes via intersection subspaces

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第6期67卷 418-432页

作者： Wenqin ZHANG Deng TANG Chenhao YING Yuan luo School of Electronic Information and Electrical Engineering Shanghai Jiao Tong University

Locally repairable codes（LRCs）, which can recover any symbol of a codeword by reading only a small number of other symbols, have been widely used in real-world distributed storage systems, such as Microsoft Azure Storage and Ceph Storage Cluster. Since binary linear LRCs can significantly reduce coding and decoding complexity, constructions of binary LRCs are of particular interest. The aim of this paper is to construct dimensional optimal binary LRCs with disjoint local repair groups. We introduce a method to connect intersection subspaces with binary LRCs and construct dimensional optimal binary linear LRCs with locality 2b（b 3） and minimum distance d 6 by employing intersection subspaces deduced from the direct sum. This method will sufficiently increase the number of possible repair groups of dimensional optimal LRCs, thus efficiently expanding the range of the construction parameters while keeping the largest code rates compared with all known binary linear LRCs with minimum distance d 6 and locality 2b.

关键词： locally repairable codes disjoint local repair groups distributed storage systems intersection subspaces direct sum

Progress in research on the exploration and evaluation of deep geothermal resources in the Fujian-Guangdong-Hainan region,China

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Energy Geoscience 2024年第2期5卷 1-13页

作者： Herong Zheng Jun luo Petroleum Exploration and Production Research Institute SINOPECBeijing 102206China

Deep geothermal resources in the Fujian-Guangdong-Hainan region,China,offer significant potential for sustainable *** diverse igneous rock formations along the southeast coast present intricate geological challenges that impede exploration and evaluation *** this study,we address critical concerns related to the Fujian-Guangdong-Hainan region's deep geothermal resources,encompassing heat source composition,formation conditions,strategic favorable areas,and exploration *** methods involve the analysis of regional geothermal reservoirs and cap *** findings include:the primary heat sources in the Fujian-Guangdong-Hainan region consist of the radioactive heat generation from granites in the crust,heat conduction in the mantle,and,in specific areas like Yangjiang and Shantou,melts within the middle and lower crust;the deep,high-temperature geothermal resources in the region predominantly reside in basins'depressed *** areas are characterized by the confluence of triple heat sources:heat from the Earth's crust,mantle,and other supplementary sources;our analysis led to the identification of three strategic areas favorable for deep geothermal resources in the Fujian-Guangdong-Hainan *** are the Beibu Gulf Basin's continental area,the Yuezhong Depression,and the Fuzhou-Zhangzhou area.

关键词： Deep geothermal resources Geology of geothermal energy Strategic selection