检索结果-南通市图书馆

Preparation and Performance of Ternary Early Strength Agent and Quercetin Composite Cement Sealing Material

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 130-140页

作者： liu Jian CHEN Meiting JI Xiaoli XU Chao WANG Chunmei Department of Safety Science and Engineering Anhui University of Science and TechnologyHuainan 232001China Key Laboratory of Mine Safety and High Efficient Mining Jointly Built by Province and Education Ministry Anhui University of Science and TechnologyHuainan 232001China Department of Chemical Engineering and Explosives Anhui University of Science and TechnologyHuainan 232001China

A ternary early-strengthening agent consisting of calcium formate+triethanolamine+lithium sulfate was compounded with quercetin to shorten the setting time of cementitious materials while ensuring their early *** optimum ratio of the three early-strengthening agents was determined as 0.5%calcium formate+0.04%triethanolamine+0.4%lithium sulfate by response surface *** effects of the ternary early-strengthening agent composed of calcium formate+triethanolamine(TEA)+lithium sulfate on cementitious pore sealing materials under the synergistic effect of quercetin were studied by means of the performance tests of compressive strength,fluidity,and setting time,and the microstructural characterizations of X-ray powder diffractometer(XRD),thermogravimetry(TG-DSC)and scanning electron microscopy(SEM).The study shows that the synergistic effect of ternary early-strengthening agent and quercetin forms a multi-performance composite admixture for cementitious *** best performance was obtained with the compounding scheme of 0.5%calcium formate+0.04%triethanolamine+0.4%lithium sulfate ternary early-strengthening agent and 0.05%*** compressive strength of 1,3,7,and 28 d are 94.8%,39.8%,42%,and 28%higher than those of the blank group,*** initial time and final setting time are 41 and 57 minutes,*** to the microscopic analysis,the network and fibrous C-S-H gels generated by ternary early-strengthening agents are attached to the surface promoted by quercetin,which forms skeleton support while thickening and solidifying the cement slurry,which enhances the early compressive strength of the cement-based materials.

关键词： sealing material ternary early-strengthening agent quercetin synergetic effect response surface methodology

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Double [5]carbohelicene: facile synthesis, chiroptical properties,isomerization study, and lasing application

引用

Science China Chemistry 2025年第1期68卷 233-240页

作者： Peipei liu Yantong Li Meng-Xiang Wu Hao Kang Xiao-Li Zhao Lin Xu Linlin liu Xiaodong Li Junfeng Fang Zhiwei Fang Ya Cheng Hai-Bo Yang Huakang Yu Xueliang Shi State Key Laboratory of Petroleum Molecular & Process Engineering Shanghai Key Laboratory of Green Chemistry and Chemical ProcessesSchool of Chemistry and Molecular Engineering East China Normal University School of Physics and Optoelectronics South China University of Technology Institute of Polymer Optoelectronic Materials & Devices State Key Laboratory of Luminescent Materials & Devices South China University of Technology School of Physics and Electronic Science Engineering Research Center of Nanophotonics & Advanced Instrument Ministry of EducationEast China Normal University State Key Laboratory of Precision Spectroscopy School of Physics and Electronic Science East China Normal University

Double carbohelicenes have attracted considerable attention due to their aesthetic structures, distinct π-conjugation extension, inherent chirality, and intriguing optical and electronic properties. Herein, the concise de novo synthesis of a new double[5]carbohelicene 1 together with its chiroptical properties, isomerization process and lasing application is presented. 1 was synthesized by a simple protocol involving the formation of a 6,6′-bipentacene as the key intermediate. It is worth noting that1 existed as two diastereomers 1-PP/MM and 1-PM, which were successfully isolated and unambiguously confirmed by Xray crystallography. The optical resolution of the racemic 1-PP/MM was successfully achieved by chiral-phase highperformance liquid chromatography（HPLC）, and 1-PP and 1-MM were characterized by circular dichroism. Interestingly, it was found that 1-PP/MM could be completely isomerized to 1-PM upon heating, and the detailed thermodynamics and kinetics of the isomerization process were systematically investigated. 1-PM exhibited deep-red luminescence with emission maximum at 723 nm and fluorescence quantum yield as high as 32.95%. Consequently, we can showcase the lasing application of 1-PM by doping with epoxy resin to assemble a bottle microlaser spontaneously, which the lasing wavelength is 796.6 nm at a threshold of 0.8 m J cm-2. We believe that our studies, including the facile synthesis methodology, detailed isomerization studies, and lasing application, will shed some light on the design and synthesis of novel carbohelical systems with more functions.

关键词： double carbohelicene optical resolution organic laser isomerization X-ray diffraction

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Stochastic Augmented-Based Dual-Teaching for Semi-Supervised Medical Image Segmentation

引用

Computers, Materials & Continua 2025年第1期82卷 543-560页

作者： Hengyang liu Yang Yuan Pengcheng Ren Chengyun Song Fen Luo School of Computer Science and Engineering Chongqing University of TechnologyChongqing400054China College of Artificial Intelligence Chongqing Technology and Business UniversityChongqing400067China

Existing semi-supervisedmedical image segmentation algorithms use copy-paste data augmentation to correct the labeled-unlabeled data distribution ***,current copy-paste methods have three limitations:(1)training the model solely with copy-paste mixed pictures from labeled and unlabeled input loses a lot of labeled information;(2)low-quality pseudo-labels can cause confirmation bias in pseudo-supervised learning on unlabeled data;(3)the segmentation performance in low-contrast and local regions is less than *** design a Stochastic Augmentation-Based Dual-Teaching Auxiliary Training Strategy(SADT),which enhances feature diversity and learns high-quality features to overcome these *** be more precise,SADT trains the Student Network by using pseudo-label-based training from Teacher Network 1 and supervised learning with labeled data,which prevents the loss of rare labeled *** introduce a bi-directional copy-pastemask with progressive high-entropy filtering to reduce data distribution disparities and mitigate confirmation bias in *** the mixed images,Deep-Shallow Spatial Contrastive Learning(DSSCL)is proposed in the feature spaces of Teacher Network 2 and the Student Network to improve the segmentation capabilities in low-contrast and local *** this procedure,the features retrieved by the Student Network are subjected to a random feature perturbation *** two openly available datasets,extensive trials show that our proposed SADT performs much better than the state-ofthe-art semi-supervised medical segmentation *** only 10%of the labeled data for training,SADT was able to acquire a Dice score of 90.10%on the ACDC(Automatic Cardiac Diagnosis Challenge)dataset.

关键词： Semi-supervised medical image segmentation contrastive learning stochastic augmented

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Experimental Study on Diesel Spray and Flame Asymmetry Characteristics of Dual-Orifice Nozzles for a Medium-Speed Engine

引用

Journal of Thermal Science 2025年第1期34卷 303-322页

作者： JU Dehao liu Rui ZHENG Liang DENG Jiahui ZHANG Wenzheng HUO Jinlu HUANG Li Shanghai Marine Diesel Engine Research Institute National Key Laboratory of Marine Engine Science and Technology Key Laboratory for Power Machinery and Engineering Ministry of EducationShanghai Jiao Tong University

The asymmetry of the multi-orifice spray will cause uneven heat load of the marine diesel engine,thereby affecting its working performance and service ***,an in-depth understanding of the spray and flame characteristics of multi-orifice nozzles will guide the optimization of the nozzle structure,needle design and diesel atomization and combustion *** this reason,four groups of dual-orifice nozzles with different hole diameters(0.1-0.55 mm) and mass flow rates covering the typical marine medium-speed diesel injections are designed and customized,and the constant volume chamber(CVC) with high temperature and pressure is used to simulate the actual in-cylinder working conditions of the diesel engine for the spray visualization *** study the asymmetry of the fuel sprays discharged from a diesel injector,the multi-orifice nozzle is simplified as a dual-orifice nozzle in this *** with X-ray Computed Tomography(CT) imaging technology,the influences of the nozzle internal structure on the spray and flame asymmetry are studied in the constructed supercritical *** is found that the asymmetry of the inlet angle and the equivalent length-diameter ratio is positively correlated with the inconsistency of the dual *** an increase in the injection pressure and nozzle diameter,the asymmetry of the dual spray becomes more pronounced,resulting in greater disparities in the ignition delay times and ignition positions of the two ***,the increase in nozzle diameter also leads to combustion instability,resulting in a flame with a serrated *** the increase of ambient temperature,the proportion of liquid phase in the jet decreases and the relative density of spray front decreases.

关键词： atomization dual-orifice nozzle nozzle structure spray flame asymmetry

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Software-defined process-near-memory architecture using 3D hybrid bonding integration

引用

Science China(Information Sciences) 2025年第1期68卷 366-378页

作者： Anlin XU Chenchen DENG Jianfeng ZHU Yao WANG Shaojun WEI Leibo liu School of Integrated Circuits Tsinghua University Beijing Institution of Tracking and Communication Technology Beijing National Research Center for Information Science and Technology Tsinghua University

With the unprecedented explosive growing amount of global data, the development of computing chips, which encounter bottlenecks such as power wall and memory wall, cannot satisfy the demanding requirement. This work proposes a software-defined process-near-memory(SDPNM) computing architecture implemented using 3D hybrid bonding *** software-defined chip architecture, featuring spatial computations and dynamic reconfiguration, innovates in a top-down manner to achieve high energy efficiency while maintaining flexibility after fabrication. The process-near-memory integration further advances the SDNPM chip in a bottom-up way to reduce the energy consumption of data movement while improving the bandwidth. Utilizing a relatively mature fabrication and bonding process can result in feasible solutions for both data-intensive and compute-intensive applications including digital signal processing and artificial intelligence. The logic die is fabricated in the SMIC 40 nm process and the DRAM die is fabricated in the PSMC 25 nm process. The hybrid bonding is implemented by XMC. The experimental results show that the energy efficiency of the proposed SDPNM chip is 33.1× better than the state-of-the-art FPGA ranging from 8.2× to 104.1×.

关键词： software-defined chips process near memory energy efficiency dynamic reconfiguration domain specific

来源：

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Constraints on what controls millennial-scale basin-wide denudation across mountain belts, Asia

引用

Science China Earth Sciences 2025年第1期68卷 74-93页

作者： Ye YANG Steven A.BINNIE Sheng XU Cong-Qiang liu Tibor J.DUNAI Institute of Surface-Earth System Science School of Earth System Science Tianjin University Institute of Geology and Mineralogy University of Cologne

The terrestrial cosmogenic nuclide dataset consisting of 123310Be measurements of fluvial sediment samples across the Asian mountain belts is used to constrain the influence of climate,tectonics and topography on Earth-surface denudation processes.10Be-derived basin-wide denudation rates were recalculated using a Monte Carlo simulation approach that relied on pixel-by-pixel production *** rates derived span four orders of magnitude,from 7.4±0.7 mm kyr-1（1σ;Central Tibetan Plateau） to 9,646744+777mm kyr-1（1σ;Southern Tibetan Plateau）,with a median of 186 mm *** our results with the traditional basin-wide production rate scaling model using a centroid coordinate and mean elevation,suggests that 96.6%of production rates will be underestimated using the latter method,especially for basins with a large *** bias between both methods reaches as large as 40%,caused by basin hypsometry and the nonlinear scaling of production rate with elevation and *** of the correlations between uniformly recalculated denudation rates and tectonics,climate,topography and rock lithology will facilitate the extrapolation of denudation rates in unknown basins using available *** the perspective of local scales,precipitation coupled with neotectonics-driven landslides is likely the most influential factor in subtropical Taiwan Island,while topography primarily constrains surface denudation rates in the eastern Tibetan Plateau within a narrow range of *** highland regions with glacier coverage,such as the Pamir,central and southern Tibetan Plateau high denudation rates are affected by glaciation,whereas lower precipitation and high erosion base level may limit river incision and evolving relief in the Central Tibetan *** contrast to local-scale findings highlighting a dominant factor constraining denudation rate,our large-scale quantitative analyses across the Asian mountain belts finds that （1） topographic metrics including

关键词： 10Be-derived denudation rate Climate change Tectonic uplift Topographic gradient Asian mountains

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Highly conductive and stable iodine doped argyrodite electrolyte for all-solid-state lithium batteries

引用

Journal of Energy Chemistry 2025年第1期100卷 50-58页

作者： Gaozhan liu Jing Zhang Jing Yang Jinghui Chen Xingyue Xiao Xiayin Yao Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of Sciences

Lithium argyrodites with high ionic conductivity and low cost are considered as one of the most prospective solid electrolytes for all-solid-state lithium ***,the poor chemical stability and compatibility with lithium metal limit their ***,Li5.4PS4.4Cl1.4I0.2solid electrolyte with high ionic conductivity of 11.49 m S cm-1and improved chemical stability is synthesized by iodine *** ultra-thin Li5.4PS4.4Cl1.4I0.2membrane with thickness of 10μm can be obtained by wet coating process,exhibiting a high ionic conductivity of 2.09 mS cm-1and low areal resistance of 1.17Ω***,iodine doping could in-situ form LiI at the lithium/electrolyte interface and improve the critical current density of Li5.4PS4.4Cl1.6from 0.8 to 1.35 mA *** resultant LiCoO2/Li5.4PS4.4Cl1.4I0.2/Li battery shows excellent cycling stability at 1 C,with a reversible specific capacity of 110.1 mA h g-1and a retention of 80.5% after 1000 *** addition,the assembled LiCoO2/Li5.4PS4.4Cl1.4I0.2membrane/Li pouch cell delivers an initial discharge capacity of 110.4 mA h g-1and 80.5% capacity retention after 100 cycles.

关键词： Solid-State Batteries

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Electrocatalytic cleavage of a lignin β-O-4 model compound and coupling with nitrogen-containing aromatics using Prussian blue analogue-derived nickel–cobalt spinel

引用

Journal of Energy Chemistry 2025年第1期100卷 628-636页

作者： Yi Qi Xueying Chen Bowen liu Xuliang Lin Xueqing Qiu Yanlin Qin Guangdong Provincial Key Laboratory of Plant Resources Biorefinery School of Chemical Engineering and Light Industry Guangdong University of Technology Guangdong Provincial Laboratory of Chemistry and Fine Chemical Engineering Jieyang Center Guangdong Basic Research Center of Excellence for Ecological Security and Green Development Guangdong University of Technology

Electrochemical conversion of lignin for the production of high-value heterocyclic aromatic compounds has great *** demonstrate the targeted synthesis and cation modulation of NiCo2O4spinel nanoboxes,synthesized via cation exchange and calcination *** catalysts exhibit excellent efficacy in the electrocatalytic conversion of lignin model compounds,specifically 2-phenoxy-1-phenylethanol,into nitrogen-containing aromatics,achieving high conversion rates and *** catalysts were synthesized via a cation exchange and calcination oxidation process,using Prussian blue nanocubes as *** porous architecture and polymetallic composition of the NiCo2O4spinel demonstrated superior performance in electrocatalytic oxidative coupling,achieving a 99.2 wt%conversion rate of the 2-phenoxy-1-phenylethanol with selectivities of 37.5 wt%for quinoline derivatives and 31.5 wt%for *** innovations include the development of a sustainable one-pot synthesis method for quinoline derivatives,the elucidation of a multistage reaction pathway involving CAO bond cleavage,hydroxyaldol condensation,and CAN bond formation,and a deeper mechanistic understanding derived from DFT *** work establishes a new strategy for lignin valorization,offering a sustainable route to produce high-value nitrogen-containing aromatics from renewable biomass under mild conditions,without the need for additional reagents.

关键词： Spinel Biomass valorization Electrocatalysis Lignin oxidation Coupling

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Performance Analysis of a Coupled System based on Organic Rankine Cycle and Double Effect Absorption Refrigeration for Waste Heat Recovery in Data Center

引用

Journal of Thermal Science 2025年第1期34卷 188-205页

作者： LI Peng XU Jiaqi WANG Binbin liu Jianyang ZHAO Wensheng HAN Zhonghe School of Energy Power and Mechanical Engineering North China Electric Power University Hebei Key Laboratory of Low Carbon and High Efficiency Power Generation Technology North China Electric Power University

During data center operation,it generates a significant volume of low-grade waste *** recover waste heat,a coupled system including solar collector,double effect absorption refrigeration and organic Rankine cycle is *** system performance is analyzed in *** the organic Rankine cycle,five organic working fluids(R245fa,R245ca,R123,R11,and R113) are selected.R245fa,R113 and R245ca obtain the maximum net power output,thermal efficiency and exergy efficiency,*** the double effect absorption refrigeration system,the evaporation temperature,condensation temperature,and generation pressure affect the COP and exergy *** the generator pressure is unchanged,the COP increases with increasing evaporation temperature and decreasing condensation *** the COP reaches 1.3,the COP slightly decreases as the evaporation temperature or condensation temperature ***,the exergy efficiency of refrigeration systems exhibits the same trend as the COP,and the exergy efficiency maximum value appears at approximately 0.32.A new performance indicator,rPUE,was defined to evaluate the data center power utilization *** flow distribution ratio and heat source temperature were optimized with multi-objective *** the mass flow distribution rate is 0.6 and the heat source temperature is 441.5 K,rPUE and the total unit production costs of the system obtain the optimal solution.

关键词： Exergy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Revealing and predicting the long-term biomechanical response of orthokeratology by developing a patient-specific computational model

引用

Science China(Physics,Mechanics & Astronomy) 2025年第1期Mechanics & Astronomy) .卷 156-168页

作者： Yifeng Li Zhuoran Yang Ziming Yan Huibin Shi Zhanli liu Kaijie Wang Department of Engineering Mechanics School of Aerospace Engineering Tsinghua University Beijing Tongren Eye Center Beijing Tongren Hospital Capital Medical University Beijing Ophthalmology & Visual Sciences Key Lab

Orthokeratology(OK) is widely used for effective myopia correction and control. However, the incomplete understanding of its biomechanical mechanisms makes OK lens fitting rely heavily on clinician judgment, complicating accurate predictions of treatment outcomes. In this paper, we performed clinical experiments and numerical analysis to study corneal deformation modes and long-term changes in central corneal thickness. Clinical experiments were conducted on 194 Chinese myopic patients under OK treatment for 3 months. Based on the experimental data, a patient-specific computational biomechanical model for OK was established and validated. Specifically, the anisotropic mechanical properties of the cornea were incorporated into the model to describe the significant difference between its shear modulus(29.5 kPa) and tensile modulus(768.4 kPa). Additionally, a viscohyperelastic material model with a prolonged corneal relaxation time of 5.6 h was developed to capture the long-term deformation response. The results show that corneal thickness reduction in OK is primarily due to out-of-plane shear deformation,influenced by the cornea's low shear resistance. Modeling the extended corneal relaxation time is crucial for predicting long-term biomechanical responses. The computational model effectively captures long-term changes in central corneal thickness, potentially improving OK lens fitting accuracy.

关键词： orthokeratology computational biomechanical model long-term viscoelasticity myopia correction

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：