检索结果-南通市图书馆

Journal of Integrative Agriculture 2021年第6期20卷 1585-1595页

作者： SUN Li-na liu yan-di ZHANG Huai-jiang yan Wen-tao YUE Qiang QIU Gui-sheng Research Institute of Pomology Chinese Academy of Agricultural SciencesXingcheng 125100P.R.China

The insect ryanodine receptor(RyR)is a novel target of the anthranilic and phthalic insecticides,which have high activity against lepidopteran *** diamide insecticides have been used to control pests in orchards in *** enhance our understanding of the effects of diamides on RyRs,full-length cDNAs were isolated and characterized from the summer fruit tortrix moth,Adoxophyes orana,which is the most severe pest of stone and pome trees *** addition,the modulation of AoRyRmRNA expression by diamide insecticides was *** AoRyRmRNA obtained had an open reading frame(ORF)of 15402 bp nucleotides encoding 5113 amino acids,and shared high and low identity with its orthologs in other insects and mammals of 77–92 and 45–47%identity,*** alternative splice site with two exclusive exons was revealed in AoRyR(a/b).The usage of exon was more frequent in eggs and larvae than in pupae and *** real-time reverse transcription PCR(qRT-PCR)showed that AoRyRmRNA was expressed at all developmental stages,especially in eggs,male pupae and male *** expression levels of AoRyRmRNA in the whole body were up-regulated markedly after 3 rd instar larvae were treated with chlorantraniliprole at LC_(10),LC_(20)and LC_(50)*** results could provide the basis for further functional studies of Ao Ry R and for the development of new chemicals with selective activity against insects.

关键词： ryanodine receptor Adoxophyes orana chlorantraniliprole mRNA expression

A comprehensive review on surface modifications of black phosphorus using biological macromolecules

在线全文

学校读者我要写书评

暂无评论

Frontiers of Materials Science 2024年第2期18卷 37-59页

作者： Chaiqiong Guo Xuhong He Xuanyu liu Yuhui Wang yan Wei Ziwei Liang di Huang Department of Biomedical Engineering Research Center for Nano-biomaterials&Regenerative MedicineCollege of Biomedical EngineeringTaiyuan University of TechnologyTaiyuan 030024China Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering Taiyuan 030032China

Black phosphorus(BP),a novel two dimensional material,exhibits remarkable photoelectric characteristics,ultrahigh photothermal conversion efficiency,substantial specific surface area,high carrier mobility,and tunable band gap *** attributes have positioned it as a promising candidate in domains such as energy,medicine,and the ***,its vulnerability to light,oxygen,and water can lead to rapid degradation and loss of crystallinity,thereby limiting its synthesis,preservation,and ***,BP has demonstrated cytotoxic tendencies,substantially constraining its viability in the realm of ***,the imperative for surface modification arises to bolster its stability and biocompatibility,while concurrently expanding its utility *** macromolecules,integral components of living organisms,proffer innate advantages over chemical agents and polymers for the purpose of the BP *** review comprehensively surveys the advancements in utilizing biological macromolecules for the modifications of *** doing so,it aims to pave the way for enhanced stability,biocompatibility,and diversified applications of this material.

关键词： blackphosphorus tumor therapy biocompatibility surface modification biomacromolecule

Comprehensive Exergoeconomic Analysis and Optimization of a Novel Zero-Carbon-Emission Multi-Generation System based on Carbon dioxide Cycle

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 1065-1081页

作者： SUN yan LI Hongwei WANG di DU Changhe School of Energy and Power Engineering Northeast Electric Power UniversityJilin132012China School of Automation Engineering Northeast Electric Power UniversityJilin132012China Xi’an Institute of Electromechanical Information Technology Xi’an710065China

This paper aims to conduct a comprehensive exergoeconomic analysis of a novel zero-carbon-emission multi-generation system and propose a fast optimization method combined with machine *** detailed exergoeconomic analysis of a novel combined power,freshwater and cooling multi-generation system is performed in this *** exergoeconomic analysis model is established by exergy flow theory.A comprehensive exergy,exergoeconomic and environmental analysis is carried *** critical decision variables are researched to bring out effects on the multi-generation system exergoeconomic performance.A novel fast optimization method combining genetic algorithm and Bagging neural network is *** advanced nature comparison is made between the proposed system and four similar *** display that increasing the turbine inlet temperature can improve exergy efficiency and decrease the total product unit *** multi-generation system exergy destruction directly determines exergy efficiency and total exergy destruction cost *** total product unit cost in the cost optimal design case is reduced by 7.7%and 25%,respectively,compared with exergy efficiency optimal design case and basic design *** with four similar cases,the proposed multi-generation system has great advantages in thermodynamic performance and exergoeconomic *** paper can provide research methods and ideas for performance analysis and fast optimization of multi-generation system.

关键词： waste heat recovery exergoeconomic analysis supercritical carbon dioxide optimization machine learning

Tuning mechanical behaviors of highly entangled hydrogels with the random distribution of mobile entanglements

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第2期45卷 277-294页

作者： Jinlong liu di LU Bin CHEN Department of Engineering Mechanics Zhejiang UniversityHangzhou 310027China Beijing System Design Institute of Electro-Mechanic Engineering Beijing 100854China Intelligent Robotic Research Center Zhejiang LaboratoryHangzhou 310027China Key Laboratory of Soft Machines and Smart Devices of Zhejiang Province Hangzhou 311100China

Highly entangled hydrogels exhibit excellent mechanical properties,including high toughness,high stretchability,and low *** considering the evolution of randomly distributed entanglements within the polymer network upon mechanical stretches,we develop a constitutive theory to describe the large stretch behaviors of these *** the theory,we utilize a representative volume element(RVE)in the shape of a cube,within which there exists an averaged chain segment along each edge and a mobile entanglement at each *** employing an explicit method,we decouple the elasticity of the hydrogels from the sliding motion of their entanglements,and derive the stress-stretch relations for these *** present theoretical analysis is in agreement with experiment,and highlights the significant influence of the entanglement distribution within the hydrogels on their *** also implement the present developed constitutive theory into a commercial finite element software,and the subsequent simulations demonstrate that the exact distribution of entanglements strongly affects the mechanical behaviors of the structures of these ***,the present theory provides valuable insights into the deformation mechanism of highly entangled hydrogels,and can aid in the design of these hydrogels with enhanced performance.

关键词： highly entangled hydrogel constitutive theory entanglement gamma distribution

Influence of High-Density Bedding Plane Characteristics on Hydraulic Fracture Propagation in Shale Oil Reservoir

在线全文

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2024年第9期140卷 3051-3071页

作者： Xiao yan di Wang Haitao Yu State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Beijing102206China State Energy Center for Shale Oil Research and Development Beijing102206China Department of Geotechnical Engineering College of Civil Engineering Tongji UniversityShanghai200092China Petroleum Exploration and Production Research Institute SINOPECBeijing102206China Key Laboratory of Deep Earth Science and Engineering(Sichuan University) Ministry of EducationChengdu610065China

The existence of high-density bedding planes is a typical characteristic of shale oil *** the behavior of hydraulic fracturing in high-density laminated rocks is significant for promoting shale oil *** this study,a hydraulic fracturing model considering tensile failure and frictional slip of the bedding planes is established within the framework of the unified pipe-interface element method(UP-IEM).The model developed for simulating the interaction between the hydraulic fracture and the bedding plane is validated by comparison with experimental *** hydraulic fracturing patterns in sealed and unsealed bedding planes are ***,the effects of differential stress,bedding plane permeability,spacing,and the friction coefficient of the bedding plane are *** results showed that a single main fracture crossing the bedding planes is more likely to form in sealed bedding planes under high differential *** decrease in bedding plane permeability and the increase in the friction coefficient also promote the fracture propagating perpendicular to the bedding *** with high-density bedding planes has a poorer fracturing effect than that with low-density bedding planes,as the hydraulic fracture is prone to initiate and propagate along the bedding ***,higher injection pressure is needed to maintain fracture propagation along the *** increase in bedding density will lead to a smaller fracturing *** fluid seepage into the bedding planes slows shale *** is recommended that increasing the injection flow rate,selecting alternative fracturing fluids,and employing multi-well/multi-cluster fracturing may be efficient methods to improve energy production in shale oil reservoirs.

关键词： Hydraulic fracturing bedding planes shale unified pipe-interface element method

The deteriorated degradation resistance of Mg alloy microtubes for vascular stent under the coupling effect of radial compressive stress and dynamic medium

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 573-585页

作者： Mengyao liu Yabo Zhang Qingyuan Zhang yan Wang di Mei Yufeng Sun Liguo Wang Shijie Zhu Shaokang Guan School of Materials Science and Engineering Zhengzhou UniversityZhengzhou 450001China Henan Key Laboratory of Advanced Magnesium Alloys Zhengzhou 450002China Key Laboratory of Advanced Materials Processing&Mold Ministry of Education Zhengzhou 450002China

The degradation of Mg alloys relates to the service performance of Mg alloy biodegradable *** order to investigate the degradation behavior of Mg alloys as vascular stent materials in the near service environment,the hot-extruded fine-grained Mg-Zn-Y-Nd alloy microtubes,which are employed to manufacture vascular stents,were tested under radial compressive stress in the dynamic Hanks'Balanced Salt Solution(HBSS).The results revealed that the high flow rate accelerates the degradation of Mg alloy microtubes and its degradation is sensitive to radial compressive *** results contribute to understanding the service performance of Mg alloys as vascular stent materials.

关键词： Mg alloy Microtubes Degradation behavior Radial compressive stress Dynamic conditions

Q-homotopy analysis method for time-fractional Newell–Whitehead equation and time-fractional generalized Hirota–Satsuma coupled KdV system

在线全文

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第3期76卷 70-83页

作者： di liu Qiongya Gu Lizhen Wang Center for Nonlinear Studies School of MathematicsNorthwest UniversityXi'an710127China

In this paper,two types of fractional nonlinear equations in Caputo sense,time-fractional Newell–Whitehead equation(FNWE)and time-fractional generalized Hirota–Satsuma coupled KdV system(HS-cKdVS),are investigated by means of the q-homotopy analysis method(q-HAM).The approximate solutions of the proposed equations are constructed in the form of a convergent series and are compared with the corresponding exact *** to the presence of the auxiliary parameter h in this method,just a few terms of the series solution are required in order to obtain better *** the sake of visualization,the numerical results obtained in this paper are graphically displayed with the help of Maple.

关键词： fractional Newell-Whitehead equation fractional generalized Hirota-Satsuma coupled KdV system approximate solution q-homotopy analysis method

Design method and experimental study of a cathode tool with an extremely high leveling ratio for electrochemical machining of blisk

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第4期37卷 593-608页

作者： Moqi SHEN Jia liu Jingtao WANG di ZHU College of Mechanical and Electrical Engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016China

To obtain final parts with the desired dimensional accuracy and repeatability via electrochemical machining(ECM), the machining process must enter an ECM balanced state. However,for the ECM processing of blisk, a key component of aerospace engines, the surface of the blade blank often has an uneven allowance distribution due to the narrow passage of the cascade. It is difficult to remedy this issue in subsequent processing steps, which is necessary to ensure the dimensional accuracy and repeatability of the final blade profile. To solve this problem, electrolytic machining must be preceded by electrolytic shaping, which requires cathode tools with large leveling ratios to quickly homogenize the blank surface of the blade. In this study, to obtain a cathode tool with an extremely high leveling ratio, a design method based on the variation in the electrode gap in the non-equilibrium electrolytic state is proposed, and a dissolution model based on the nonequilibrium state is established. In this design method, the allowance on the blank to be machined is first divided into many discrete allowances with the normal direction. The initial machining clearance, feed rate, and total machining time are then calculated using classical ECM equilibrium state theory based on the maximum allowance. Meanwhile, the point coordinates of the cathode tool at maximum allowance can be determined. The non-equilibrium model can then be used to calculate the relative coordinate positions corresponding to the remaining discrete allowances. Finally, the entire cathode tool profile is designed. Simulations, fundamental experiments, and blisk unit workpiece experiments were carried out to validate the design approach. In the simulated processing of the plane workpiece, the leveling ratio of the cathode tool designed by the proposed method(0.77)was 83% higher than that of the cathode tool designed using the traditional method. The simulation results were confirmed by processing experiments. In t

关键词： Electrochemical machining(ECM) Non-equilibrium machining Large leveling ratios Cathode design Finite element simulation Blisk

A calibration and compensation method for an industrial robot with high accuracy harmonic reducers

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第3期67卷 725-739页

作者： ZHAO Yiyang liu Xun CAO JiaBin liu JinYu XU yan yan WeiXin School of Mechanical Engineering Shanghai Jiao Tong UniversityShanghai 200240China College of Computer and Control Engineering Northeast Forestry UniversityHarbin 150040China

Industrial serial robots need high stiffness to keep absolute pose accuracy and meet the requirements in practical applications. However, the weak stiffness feature of robot joints and the payloads affected on robot end-effector, which will also increase the pose error of robot. Especially, the existing calibration methods often consider under no-payload condition without discussing the payload state. In this paper, we report a new industrial serial robot composed by a new harmonic reducer: Model-Y, based on high accuracy and high stiffness, and a kinematic parameter calibration algorithm which is based on a harmonic reducer forcedeformation model. To decrease the accuracy effects of payload, an iterative calibration method for kinematic parameters with payload situation was proposed. Simulation and experiments are conducted to verify the effectiveness of the proposed calibration method using the self-developed industrial serial robot. The results show a remarkably improved accuracy in absolute position and orientation with the robot's payload range. The position mean error has 70% decreased to 0.1 mm and the orientation mean error diminished to less than 0.01° after calibration with compensation. Additionally, online linear and circular tests are carried out to evaluate the position error of the robot during large-scale spatial and low-speed continuous movement. The accuracy is consistent with the previous calibration results, indicating the effectiveness and advantages of the proposed strategy in this article.

关键词： industrial serial robot Model-Y harmonic calibration stiffness model online compensation

Numerical Investigation of the Angle of Attack Effect on Cloud Cavitation Flow around a Clark-Y Hydrofoil

在线全文

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2024年第6期139卷 2947-2964页

作者： di Peng Guoqing Chen Jiale yan Shiping Wang College of Engineering Peking UniversityBeijing100871China College of Shipbuilding Engineering Harbin Engineering UniversityHarbin150001China

Cavitation is a prevalent phenomenon within the domain of ship and ocean engineering,predominantly occurring in the tail flow fields of high-speed rotating propellers and on the surfaces of high-speed underwater *** re-entrant jet and compression wave resulting from the collapse of cavity vapour are pivotal factors contributing to cavity ***,these phenomena significantly modulate the evolution of cavitation *** this paper,numerical investigations into cloud cavitation over a Clark-Y hydrofoil were conducted,utilizing the Large Eddy Simulation(LES)turbulence model and the Volume of Fluid(VOF)method within the OpenFOAM *** analysis of results obtained at different angles of attack is undertaken.A discernible augmentation in cavity thickness is observed concomitant with the escalation in attack angle,alongside a progressive intensification in pressure at the leading edge of the hydrofoil,contributing to the suction *** results can serve as a fundamental point of reference for gaining a deeper comprehension of cloud cavitation dynamics.

关键词： Cloud cavitation re-entrant jet compression wave clark-Y hydrofoil