检索结果-南通市图书馆

中国有色金属学会会刊：英文版 2012年第S3期22卷 722-728页

作者： Jung ho SHIN kwang Soo ChoI Tie-gang WANG kwang ho kim Roman NOWAK National Core Research Center for Hybrid Materials Solution Pusan National University School of Materials Science and Engineering Pusan National University State Key Laboratory of Corrosion and Protection Institute of Metal ResearchChinese Academy of Sciences School of Chemical Technology Aalto University

Ternary Ti-B-N coatings were synthesized on AISI 304 and Si wafer by plasma-enhanced chemical vapor deposition (PECVD) technique using a gaseous mixture of TiCl4,BCl3,H2,N2,and *** virtue of X-ray diffraction analysis,X-ray photoelectron spectroscopy,scanning electron microscope,and high-resolution transmission electron microscope,the influences of B content on the microstructure and properties of Ti B N coatings were investigated *** results indicated that the microstructure and mechanical properties of Ti-B-N coatings largely depend on the transformation from FCC-TiN phase to HCP-TiB2 *** increasing B content and decreasing N content in the coatings,the coating microstructure evolves gradually from FCC-TiN/a-BN to HCP-TiB2 /a-BN via FCC-TiN+HCP-TiB2/*** highest microhardness of about 34 GPa is achieved,which corresponds to the nanocomposite Ti-63%B-N (mole fraction) coating consisting of the HCP-TiB2 nano-crystallites and amorphous BN *** lowest friction-coefficient was observed for the nanocomposite Ti-41%B-N (mole fraction) coating consisting of the FCC-TiN nanocrystallites and amorphous BN

关键词： Ti-B-N coating plasma-enhanced chemical vapor deposition (PECVD) nanocomposite coating hardness friction coefficient

Effect of carbon on microstructure of CrAlC_xN_(1-x) coatings by hybrid coating system

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2011年第A01期21卷 78-82页

作者： Sung-Kyu AHN Se-Hun KWON kwang-ho kim National Core Research Center for Hybrid Materials Solution Pusan National University School of Materials Science and Engineering Pusan National University

A systematic investigation of the microstructure of CrA1CxN1-x coatings as a function of carbon contents was conducted. Quaternary CrA1CxN1-x coatings were deposited on Si wafers by a hybrid coating system combining an arc-ion plating technique and a DC reactive magnetron sputtering technique using Cr and AI targets in the Ar/N2/CH4 gaseous mixture. The effect of carbon content on microstructure of CrA1C^N~ x coatings was investigated with instrumental analyses of X-ray diffraction, X-ray photoelectron, and high-resolution transmission electron microscopy. The results show that the carbon content of CrA1CxN1-x coatings linearly increases with increasing CH4/（CH4/N2） gas flow rate ratio. The surface roughness of the CrA1CxN1-x coating layer decreases with the increase of carbon content.

关键词： CrA1C,N1-x, coating nanocomposite microstructure hybrid coating system

Formation of nanocrystalline microstructure in arc ion plated CrN films

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2011年第A01期21卷 73-77页

作者： Qi-min WANG Se-Hun KWON kwang-ho kim National Core Research Center for Hybrid Materials Solution Pusan National University Busan 609-735 Korea School of Materials Science and Engineering Pusan National University Busan 609-735 Korea

Applying negative bias voltages caused significant microstructure changes in arc ion plated CrN films. Nanocrystalline microstructures were obtained by adjusting the negative bias voltage. Structural characterizations of the films were carried out using X-ray diffractometry (XRD) and high-resolution transmission electron microscopy (HR-TEM). The results indicated that increasing ion bombardment by applying negative bias voltages resulted in the formation of defects in the CrN films, inducing microstructure evolution from micro-columnar to nanocrystalline. The microhardness and residual stresses of the films were also affected. Based on the experimental results, the evolution mechanisms of the film microstructure and properties were discussed by considering ion bombardment effects.

关键词： CrN thin films deposition microstructure arc ion plating ion bombardment

Synthesis and properties of Cr-Al-Si-N films deposited by hybrid coating system with high power impulse magnetron sputtering (HIPIMS) and DC pulse sputtering

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2012年第S3期22卷 729-734页

作者： Min Su KANG Tie-gang WANG Jung ho SHIN Roman NOWAK kwang ho kim School of Materials Science and Engineering Pusan National University State Key Laboratory of Corrosion and Protection Institute of Metal ResearchChinese Academy of Sciences National Core Research Center for Hybrid Materials Solution Pusan National University Extreme Energy-Density Research Institute Nagaoka University of Technology School of Chemical Technology Aalto University

The CrN and Cr-Al-Si-N films were deposited on Si wafer and SUS 304 substrates by a hybrid coating system with high power impulse magnetron sputtering (HIPIMS) and a DC pulse sputtering using Cr and AlSi targets under N2/Ar *** varying the sputtering current of the AlSi target in the range of 0-2.5 A,both the Al and Si contents in the films increased gradually from 0 to 19.1% and 11.1% (mole fraction),*** influences of the AlSi cathode DC pulse current on the microstructure,phase constituents,mechanical properties,and oxidation behaviors of the Cr-Al-Si-N films were investigated *** results indicate that the as-deposited Cr-Al-Si-N films possess the typical nanocomposite structure,namely the face centered cubic (Cr,Al)N nano-crystallites are embedded in the amorphous Si3N4 *** increasing the Al and Si contents,the hardness of the film first increases from 20.8 GPa for the CrN film to the peak value of 29.4 GPa for the Cr0.23Al0.14Si0.07 N film,and then decreases *** the meanwhile,the Cr0.23Al0.14Si0.07N film also possesses excellent high-temperature oxidation resistance that is much better than that of the CrN film at 900 or 1000 °C.

关键词： Cr-Al-Si-N film high power impulse magnetron sputtering DC pulsed sputtering high-temperature oxidation resistance

Effects of Cr interlayer on mechanical and tribological properties of Cr-Al-Si-N nanocomposite coating

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2011年第A01期21卷 62-67页

作者： Young Su hoNG Se Hun KWON Tiegang WANG Doo-In kim Jihwan ChoI kwang ho kim School of Materials Science and Engineering Pusan National University National Core Research Center for Hybrid Materials Solution Pusan National University

Cr-A1-Si-N coatings were deposited on SUS 304 substrate by a hybrid coating system. A Cr interlayer was introduced between Cr-A1-Si-N coating and SUS 304 substrate to improve the coating adherence. The effects of Cr interlayer on the microhardness, adhesion, and tribological behavior of Cr-A1-Si-N coatings were systematically investigated. The results indicate that the microhardness of the Cr-A1-Si-N coatings gradually deceases with increasing thickness of Cr interlayers. The adhesion between Cr-A1-Si-N and SUS 304 substrate is improved by addition of the Cr interlayers. A peak critical load of-50 N is observed for the coating containing Cr interlayer of 60 nm as compared - 20 N for the coating without Cr interlayer. The thicker Cr interlayers result in reduced critical load values. Moreover, the wear resistance of the Cr-AI-Si-N coatings is greatly enhanced by introducing the Cr interlayer with thickness of 60 nm in spite of the decreased microhardness. The friction coefficient of the coating system is also moderately reduced.

关键词： Cr-A1-Si-N coating Cr interlayer hardness adhesion wear

Distribution of electric field for carbon nanotube assembly: Experiments (II)

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2011年第A1期21卷 121-125页

作者： Soongeun KWON Soo-Hyun kim kwang-ho kim Myung-chang KANG Hyung-woo LEE Department of Mechanical Engineering Korea Advanced Institute of Science and Technology (KAIST) Daejeon 305-701 Korea National Core Research Center for Hybrid Materials Solution Pusan National University

The distribution effect of electric field on the alignment and attachment of carbon nanotubes （CNTs） were investigated. The experimental results were compared with the simulation results according to three different shaped electrodes. In previous simulation, the round shaped electrodes were expected to be more effective for aligning and attaching a single CNT between two electrodes than conical or rectangular shaped electrodes. To verify the simulation results, three different shaped electrodes were introduced and a single multi-walled carbon nanotube （MWNT） was attached. The optimal conditions for aligning and attaching MWNTs such as the frequency, applied voltage and concentration of MWNTs solution were investigated. Through repeated experiments, frequency of 100 kHz-10 MHz, applied voltage of 0.3-1.3 V^s/~m, concentration of 5 ktg/mL in MWNTs solution were obtained as a possible condition range to attach MWNTs. Under these conditions, the yield of MWNTs attachment between two electrodes was up to 70%. In previous simulation, furthermore, it was verified that the size of the stable or quasi-stable region made CNTs aligned and attached on different shaped electrodes from the comparison of the experimental and simulation results. Most single MWNT attachment was accomplished on the round shaped electrodes.

关键词： carbon nanotubes dielectrophoresis round shaped electrode simulation

Environmentally friendly hybrid coating prepared by electro-deposition method at various seawater conditions

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2009年第B9期19卷 110-113页

作者： Myeong-hoon LEE Kyung-Man MOON Jong-Do kim Kang JUN kwang-ho kim Division of Marine System Engineering Korea Maritime University Dongsam-Dong Youngdo Busan 606-791 Korea National Core Research Center for Hybrid Materials Solution Pusan National University Busan 609-735 Korea

The formation mechanism of calcareous deposit films in seawater involves an increase in pH at the metal/solution interface due to cathodic reactions, a raised carbonate ion concentration at the interface and precipitation of inorganic deposits such as CaCO3, Mg(OH)2. Environmentally friendly hybrid calcareous deposit films were formed by an electrochemical technique on steel substrates in various solution environments. And the influence of dissolved gas on formation of calcareous deposit films was investigated by scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray diffractometry(XRD). Consequently, these results showed that formation of good overall calcareous deposited films by dissolved gas in seawater environments can be achieved by controlling the material composition and structure through effective use of electrochemical method.

关键词：海水混合环保电沉积扫描电子显微镜涂层制备溶液界面

Optical diffraction gratings embedded in BK-7 glass by low-density plasma formation using femtosecond laser

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2011年第A01期21卷 165-169页

作者： Jung-Kyu PARK Sung-Hak Cho kwang-ho kim Myung-Chang KANG Nano Machining Laboratory Korea Institute of Machinery and Material Daejeon 305-343 Korea National Core Research Center for Hybrid Materials Solution Pusan National University

The optical embedded diffraction gratings with the internal refractive index modification in BK-7 glass plates were demonstrated using low-density plasma formation excited by a high-intensity femtosecond （130 fs） Ti： sapphire laser （λp=790 rim）. The refractive index modifications with diameters ranging from 400 nm to 4 gm were photoinduced after plasma formation occurred upon irradiation with peak intensities of more than 1 ×10^13 W/cm2. The graded refractive index profile was fabricated to be a symmetric around the center of the point at which low-density plasma occurred. The maximum refractive index change （An） was estimated to be 1.5x10 2. Several optical embedded gratings in BK-7 glass plate were demonstrated with refractive index modification induced by the scanning of low-density plasma formation.

关键词： BK-7 glass plate diffraction grating refractive index modification plasma formation femtosecond laser

Distribution of electric field for carbon nanotube assembly: Simulation (I)

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2011年第A01期21卷 117-120页

作者： Soon-Geun KWON Soo-Hyun kim kwang-ho kim Myung-Chang KANG Hyung-Woo LEE Department of Mechanical Engineering Korea Advanced Institute of Science and Technology (KAIST) Daejeon 305-701 Korea National Core Research Center for Hybrid Materials Solution Pusan National University

The distribution of electric field for the alignment and attachment of carbon nanotubes (CNTs) was simulated. To be attached at the desired place, the aligned and attracted CNTs should be stayed in the desired area called the stable region or the quasi-stable region for an instant where the change of electric field is minimized. Since the conical electrode has the very narrow sized quasi-stable region, few CNTs can be attached. The rectangular electrodes have a wide stable region, so lots of CNTs can be attached. The results indicate that the round electrode which has a proper sized quasi-stable region is more effective for aligning and attaching a single CNT than the conical or rectangular shaped electrodes.

关键词： carbon nanotubes (CNTs) dielectrophoresis (DEP) round shaped electrode simulation

Ultrasonic Plasma Engineering Toward Facile Synthesis of Single-Atom M-N4/N-Doped Carbon(M=Fe,Co) as Superior Oxygen Electrocatalyst in Rechargeable Zinc-Air Batteries

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2021年第4期13卷 76-95页

作者： Kai Chen Seonghee kim Minyeong Je Heechae Choi Zhicong Shi Nikola Vladimir kwang ho kim Oi Lun Li Department of Materials Science and Engineering Pusan National University30 Jangjeon‑dongGeumjeong‑guBusan 609‑735Republic of Korea Theoretical Materials and Chemistry Group Institute of Inorganic ChemistryUniversity of CologneGreinstr.650939 CologneGermany School of Materials and Energy Guangdong University of TechnologyGuangzhou 510006People’s Republic of China Faculty of Mechanical Engineering and Naval Architecture University of ZagrebIvana Lucica 510002 ZagrebCroatia Global Frontier R&D Center for Hybrid Interface Materials 30 Jangjeon‑dongGeumjeong‑guBusan 46241Republic of Korea

As bifunctional oxygen evolution/reduction electrocatalysts,transition-metal-based single-atom-doped nitrogen-carbon(NC)matrices are promising successors of the corresponding noblemetal-based catalysts,offering the advantages of ultrahigh atom utilization effciency and surface active ***,the fabrication of such matrices(e.g.,well-dispersed single-atom-doped M-N4/NCs)often requires numerous steps and tedious ***,ultrasonic plasma engineering allows direct carbonization in a precursor solution containing metal phthalocyanine and *** combining with the dispersion effect of ultrasonic waves,we successfully fabricated uniform single-atom M-N4(M=Fe,Co)carbon catalysts with a production rate as high as 10 mg *** Co-N4/NC presented a bifunctional potential drop ofΔE=0.79 V,outperforming the benchmark Pt/C-Ru/C catalyst(ΔE=0.88 V)at the same catalyst *** calculations revealed that Co-N4 was the major active site with superior O2 adsorption-desorption *** a practical Zn-air battery test,the air electrode coated with Co-N4/NC exhibited a specific capacity(762.8 mAh g(-1))and power density(101.62 mW cm^(-2)),exceeding those of Pt/C-Ru/C(700.8 mAh g^(-1) and 89.16 mW cm^(-2),respectively)at the same catalyst ***,for Co-N4/NC,the potential difference increased from 1.16 to 1.47 V after 100 charge-discharge *** proposed innovative and scalable strategy was concluded to be well suited for the fabrication of single-atom-doped carbons as promising bifunctional oxygen evolution/reduction electrocatalysts for metal-air batteries.

关键词： Single-atom-doped M-N4/NC catalyst Plasma engineering ORR/OER bifunctional activity DFT calculation Rechargeable Zn-air battery