检索结果-南通市图书馆

Two-stage dynamic recrystallization and texture evolution in Al-7Mg alloy during hot torsion

International Journal of Minerals,Metallurgy and Materials 2024年第8期31卷 1900-1911页

作者： kwang tae son Chang Hee Cho Myoung Gyun Kim Ji Woon Lee School of Mechanical Industrialand Manufacturing EngineeringOregon State UniversityCorvallis OR 97331USA Department of Materials Science Engineering Northwestern UniversityEvanston IL 60208USA Research Institute of Industrial Science and Technology(RIST) Pohang 37673Rep.of Korea Division of Advanced Materials Engineering Kongju National UniversityCheonan 31080Rep.of Korea Center for Advanced Materials and Parts of Powders Kongju National UniversityCheonan 31080Rep.of Korea

Hot torsion tests were performed on the Al-7Mg alloy at the temperature ranging from 300 to 500℃ and strain rates between 0.05 and 5 s^(-1) to explore the progressive dynamic recrystallization(DRX)and texture *** DRX behavior of the alloy manifested two distinct stages:Stage 1 at strain of≤2 and Stage 2 at strains of≥*** Stage 1,there was a slight increase in the DRXed grain fraction(X_(DRX))with predominance of discontinuous DRX(DDRX),followed by a modest change in X_(DRX) until the transition to Stage *** 2 was marked by an accelerated rate of DRX,culminating in a substantial final X_(DRX) of~*** backscattered diffraction(EBSD)analysis on a sample in Stage 2 revealed that continuous DRX(CDRX)predominantly occurred within the(121)[001]grains,whereas the(111)[110]grains underwent a geometric DRX(GDRX)evolution without a noticeable sub-grain ***,a modified Avrami’s DRX kinetics model was utilized to predict the microstructural refinement in the Al-7Mg alloy during the DRX *** this kinetics model did not accurately capture the DDRX behavior in Stage 1,it effectively simulated the DRX rate in Stage *** texture index was employed to assess the evolution of the texture isotropy during hot-torsion test,demonstrating significant improvement(>75%)in texture randomness before the commencement of Stage *** initial texture evolution is attributed to the rotation of parent grains and the substructure evolution,rather than to an increase in X_(DRX).

关键词： Al-7Mg alloys hot deformation hot torsion tests dynamic recrystazlliation microstructure texture

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

M1-polarized macrophage-derived cellular nanovesicle-coated lipid nanoparticles for enhanced cancer treatment through hybridization of gene therapy and cancer immunotherapy

引用

Acta Pharmaceutica Sinica B 2024年第7期14卷 3169-3183页

作者： Ha Eun Shin Jun-Hyeok Han Seungyong Shin Ga-Hyun Bae Boram son tae-Hyung Kim Hee Ho Park Chun Gwon Park Wooram Park Department of Integrative Biotechnology Sungkyunkwan University(SKKU)SuwonGyeonggi 16419Republic of Korea Deparment of Inteligent Precision Healthcare Convergence SKKUSuwonGyeonggi 16419Republic of Korea Department of MetaBioHealth SKKU Institute for ConvergenceSKKUSuwonGyeonggi 16419Republic of Korea Department of Bioengineering Hanyang UniversitySeoul 04763Republic of Korea Department of Integrative Engineering Chung-Ang UniversitySeoul 06974Republic of Korea Department of Biomedical Engineering SKKUSuwonGyeonggi 16419Republic of Korea Korea Institute of Science and Technology(KIST) Seoul 02792Republic of Korea

Optimum genetic delivery for modulating target genes to diseased tissue is a major obstacle for profitable gene *** nanoparticles(LNPs),considered a prospective vehicle for nucleic acid delivery,have demonstrated efficacy in human use during the COVID-19 *** study introduces a novel biomaterial-based platform,M1-polarized macrophage-derived cellular nanovesicle-coated LNPs(M1-C-LNPs),specifically engineered for a combined gene-immunotherapy approach against solid *** dual-function system of M1-C-LNPs encapsulates Bcl2-targeting siRNA within LNPs and immune-modulating cytokines within M1 macrophage-derived cellular nanovesicles(M1-NVs),effectively facilitating apoptosis in cancer cells without impacting T and NK cells,which activate the intratumoral immune response to promote granule-mediating killing for solid tumor *** retention within tumor was observed upon intratumoral administration of M1-C-LNPs,owing to the presence of adhesion molecules on M1-NVs,thereby contributing to superior tumor growth *** findings represent a promising strategy for the development of targeted and effective nanoparticle-based cancer genetic-immunotherapy,with significant implications for advancing biomaterial use in cancer therapeutics.

关键词： Genetic-immunotherapy M1 macrophage-derived cellular nanovesicles Lipid nanoparticles(LNPs) Gene therapy siRNA Cancer immunotherapy Solid tumor Tumor microenvironment(TME)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Changes in microorganisms and metabolites during long-term fermentation of commercially manufactured anchovy sauce

引用

Food Science and Human Wellness 2024年

作者： Daehyeon Kim Seong-Eun Park Eun-Ju Kim Seung-Ho Seo kwang-Moon Cho Sun Jae Kwon Hong-Seok son Department of Biotechnology College of Life Sciences and Biotechnology Korea University sonlab Inc. 3. AccuGene Inc.

This study was performed to investigate the changes in microbial communities and metabolites during the long-term fermentation of commercially manufactured anchovy sauce. Samples of commercial anchovy sauce were collected from large-scale fermentation tanks with fermentation periods of up to 7.87 years. The complex bacterial community was simplified to two genera， Tetragenococcus and Halanaerobium， after approximately 0.55 years of fermentation. Although genera， such as Saccharomyces， Cladosporium， Candida， and Aspergillus， were relatively dominant， no clear pattern was identified in fungal community analysis. The longitudinal metabolite profile demonstrated that approximately half (55.8%) of the metabolites present in anchovy sauce were produced within a year of fermentation due to rapid fermentation. Despite the static microbial community， the contents of several metabolites including amino acids and biogenic amines changed continuously during the long-term fermentation of anchovy sauce. This study provides novel insights into the changes in microbiota and metabolites in fish sauce produced without any starter inoculation.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Surface-functionalized hole-selective monolayer for high efficiency single-junction wide-bandgap and monolithic tandem perovskite solar cells

引用

Journal of Energy Chemistry 2024年第1期88卷 317-326,I0008页

作者： Devthade Vidyasagar Yeonghun Yun Jae Yu Cho Hyemin Lee Kyung Won Kim Yong tae Kim Sung Woong Yang Jina Jung Won Chang Choi Seonu Kim Rajendra Kumar Gunasekaran Seok Beom Kang kwang Heo Dong Hoe Kim Jaeyeong Heo Sangwook Lee School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Department of Materials Science and Engineering and Optoelectronics Convergence Research CenterChonnam National UniversityGwangju 61186Republic of Korea Department of Materials Science and Engineering Korea UniversitySeoul 02841Republic of Korea Department of Nanotechnology and Advanced Materials Engineering Sejong UniversitySeoul 05006Republic of Korea

Carbazole moiety-based 2PACz([2-(9H-carbazol-9-yl)ethyl]phosphonic acid)self-assembled monolayers(SAMs)are excellent hole-selective contact(HSC)materials with abilities to excel the charge-transferdynamics of perovskite solar cells(PSCs).Herein,we report a facile but powerful method to functionalize the surface of 2PACz-SAM,by which reproducible,highly stable,high-efficiency wide-bandgap PSCs can be *** 2PACz surface treatment with various donor number solvents improves assembly of 2PACz-SAM and leave residual surface-bound solvent molecules on 2PACz-SAM,which increases perovskite grain size,retards halide segregation,and accelerates hole *** surface functionalization achieves a high power conversion efficiency(PCE)of 17.62%for a single-junction wide-bandgap(~1.77 e V)*** also demonstrate a monolithic all-perovskite tandem solar cell using surfaceengineered HSC,showing high PCE of 24.66%with large open-circuit voltage of 2.008 V and high fillfactor of 81.45%.Our results suggest this simple approach can further improve the tandem device,when coupled with a high-performance narrow-bandgap sub-cell.

关键词： Perovskite solar cells 2PACz Monolithic tandem solar cells Wide bandgap

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High Na-ion conductivity andmechanical integrity of anion-exchanged polymeric hydrogel electrolytes for flexible sodium ion hybrid energy storage

引用

SusMat 2024年第1期4卷 140-153页

作者： JungWoo Hong Harpalsinh H.Rana Jeong Hee Park Jun Su Kim Sang Joon Lee Gun Jang tae Hoon Kang Kang Ho Shin Sang Ha Baek Wooseok Yang kwang Ho Kim Ju-Hyuk Lee Ho Seok Park School of Chemical Engineering Sungkyunkwan UniversitySuwonRepublic of Korea Clean Energy Research Center Korea Institute of Science and Technology(KIST)SeoulRepublic of Korea KIST-SKKU Carbon-Neutral Research Center Sungkyunkwan University(SKKU)SuwonRepublic of Korea SKKU Institute of Energy Science and Technology(SIEST) Sungkyunkwan UniversitySuwonRepublic of Korea COSMOS LAB/92 Jomaru-ro 385beon-gilBucheon-siRepublic of Korea SKKU Advanced Institute of Nano Technology(SAINT) Sungkyunkwan UniversitySuwonRepublic of Korea Department of Health Sciences and Technology Samsung Advanced Institute for Health Sciences and Technology(SAIHST)Sungkyunkwan UniversitySuwonRepublic of Korea

The polymeric gel electrolytes are attractive owing to their higher ionic conductivities than those of dry polymer electrolytes and lowered water activity for enlarged potential ***,the ionic conductivity and mechanical strength of the Na-ion conducting polymeric gel electrolytes are limited by below 20 mS cm−1 and 2.2 ***,we demonstrate Na-ion conducting and flexible polymeric hydrogel electrolytes of the chemically coupled poly(diallyldimethylammonium chloride)-dextrin-N,N′-methylene-bisacrylamide film immersed in NaClO_(4) solution(ex-DDA-Dex+NaClO_(4))for flexible sodium-ion hybrid capacitors(f-NIHC).In particular,the anion exchange reaction and synergistic interaction of ex-DDA-Dex with the optimum ClO_(4)−enable to greatly improve the ionic conductivity up to 27.63 mS cm−1 at 25◦C and electrochemical stability window up to 2.6 V,whereas the double networking structure leads to achieve both the mechanical strength(7.48 MPa)and softness of hydrogel ***,the f-NIHCs with the ex-DDA-Dex+NaClO_(4) achieved high specific and high-rate capacities of 192.04 F g^(−1)at 500 mA g^(−1)and 116.06 F g^(−1)at 10000 mA g^(−1),respectively,delivering a large energy density of 120.03Wh kg^(−1)at 906Wkg^(−1)and long cyclability of 70%over 500 cycles as well as demonstrating functional operation under mechanical stresses.

关键词： anion exchange chemistry flexible energy storage hybrid energy storage hydrogel electrolytes renewable electrolytes sodium storage

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Multi-Generator Discriminator Network Using Texture-Edge Information

引用

Computers, Materials & Continua 2023年第5期75卷 3537-3551页

作者： Kyeongseok Jang Seongsoo Cho kwang Chul son Department of Plasma Bio Display Kwangwoon University20Gwangun-roNowon-guSeoul01897Korea School of Software Soongsil University369Sangdo-roDongjak-guSeoul06978Korea Department of Information Contents Kwangwoon University20Gwangun-roNowon-guSeoul01897Korea

In the proposed paper,a parallel structure type Generative Adversarial Network(GAN)using edge and texture information is *** the existing GAN-based model,many learning iterations had to be given to obtaining an output that was somewhat close to the original data,and noise and distortion occurred in the output image even when learning was *** solve this problem,the proposed model consists of two generators and three discriminators to propose a network in the form of a parallel *** the network,each edge information and texture information were received as inputs,learning was performed,and each character was combined and outputted through the Combine *** this,edge information and distortion of the output image were improved even with fewer iterations than DCGAN,which is the existing GAN-based *** a result of learning on the network of the proposed model,a clear image with improved contour and distortion of objects in the image was output from about 50,000 iterations.

关键词： Deep learning convolution neural network generative adversarial network edge information texture information

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Cavity-Suppressing Electrode Integrated with Multi-Quantum Well Emitter:A Universal Approach Toward High-Performance Blue TADF Top Emission OLED

引用

Nano-Micro Letters 2022年第4期14卷 75-89页

作者： Il Gyu Jang Vignesh Murugadoss tae Hoon Park Kyung Rock son Ho Jin Lee WanQi Ren Min Ji Yu tae Geun Kim School of Electrical Engineering Korea UniversityAnam-ro 145Seongbuk-guSeoul 02841Republic of Korea

A novel device structure for thermally activated delayed fluorescence(TADF)top emission organic light-emitting diodes(TEOLEDs)that improves the viewing angle characteristics and reduces the efficiency roll-off is ***,we describe the design and fabrication of a cavity-suppressing electrode(CSE),Ag(12 nm)/WO_(3)(65 nm)/Ag(12 nm)that can be used as a transparent *** the TADF-TEOLED fabricated using the CSE exhibits higher external quantum efficiency(EQE)and improved angular dependency than the device fabricated using the microcavity-based Ag electrode,it suffers from low color purity and severe efficiency *** drawbacks can be reduced by using an optimized multi-quantum well emissive layer(MQW EML).The CSE-based TADF-TEOLED with an MQW EML fabricated herein exhibits a high EQE(18.05%),high color purity(full width at half maximum~59 nm),reduced efficiency roll-off(~46%at 1000 cd m^(−2)),and low angular *** improvements can be attributed to the synergistic effect of the CSE and MQW *** optimized transparent CSE improves charge injection and light outcoupling with low angular dependence,and the MQW EML effectively confines charges and excitons,thereby improving the color purity and EQE *** proposed approach facilitates the optimization of multiple output characteristics of TEOLEDs for future display applications.

关键词： Cavity suppression Multi-quantum well Viewing angle Efficiency roll-off Top emission OLED

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Bioinspired urease-powered micromotor as an active oral drug delivery carrier in stomach

引用

Bioactive Materials 2022年第3期7卷 54-62页

作者： Hyunsik Choi Sang Hoon Jeong tae Yeon Kim Jeeyoon Yi Sei kwang Hahn Department of Materials Science and Engineering Pohang University of Science and Technology(POSTECH)77 Cheongam-roNam-guPohangGyeongbuk37673South Korea

Self-propelling micro-and nano-motors(MNMs)have been extensively investigated as an emerging oral drug delivery carrier for gastrointestinal(GI)tract ***,the propulsion of current MNMs reported so far is mostly based on the redox reaction of metals(such as Zn and Mg)with severe propulsion gas generation,remaining non-degradable residue in the GI ***,we develop a bioinspired enzyme-powered biopolymer micromotor mimicking the mucin penetrating behavior of Helicobacter pylori in the *** converts urea to ammonia and the subsequent increase of pH induces local gel-sol transition of the mucin layer facilitating the penetration into the stomach tissue *** successful fabrication of micromotors is confirmed by high-resolution transmission electron microscopy,electron energy loss spectroscopy,dynamic light scattering analysis,zeta-potential *** acidic condition,the immobilized urease can efficiently converted urea to ammonia,comparable with that of neutral condition because of the increase of surrounding pH during *** administration into the stomach,the micromotors show enhanced penetration and prolonged retention in the stomach for 24 ***,histological analysis shows that the micromotors are cleared within 3 days without causing any toxicity in the GI *** enhanced penetration and retention of the micromotors as an active oral delivery carrier in the stomach would be successfully harnessed for the treatment of various GI tract diseases.

关键词： Micro-and nanomotors Polydopamine Urease Oral delivery Stomach diseases

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Beneficial impact of lithium bis(oxalato)borate as electrolyte additive for high-voltage nickel-rich lithium-battery cathodes

引用

InfoMat 2023年第8期5卷 67-80页

作者： Fanglin Wu Angelo Mullaliu Thomas Diemant Dominik Stepien Tatjana NParac-Vogt Jae-kwang Kim Dominic Bresser Guk-tae Kim Stefano Passerini Helmholtz Institute Ulm(HIU) UlmGermany Karlsruhe Institute of Technology(KIT) KarlsruheGermany Department of Chemistry KU LeuvenLeuvenBelgium Department of Energy Convergence Engineering Cheongju UniversityCheongjuRepublic of Korea Chemistry Department Sapienza University of RomeRomeItaly

High-voltage nickel-rich layered cathodes possess the requisite,such as excellent discharge capacity and high energy density,to realize lithium batteries with higher energy ***,such materials suffer from structural and interfacial instability at high voltages(>4.3 V).To reinforce the stability of these cathode materials at elevated voltages,lithium borate salts are investigated as electrolyte additives to generate a superior cathode-electrolyte ***,the use of lithium bis(oxalato)borate(LiBOB)leads to an enhanced cycling stability with a capacity retention of 81.7%.Importantly,almost no voltage hysteresis is detected after 200 cycles at *** outstanding electrochemical performance is attributed to an enhanced structural and interfacial stability,which is attained by suppressing the generation of micro-cracks and the superficial structural degradation upon *** improved stability stems from the formation of a fortified borate-containing interphase which protects the highly reactive cathode from parasitic reactions with the ***,the decomposition process of LiBOB and the possible adsorption routes to the cathode surface are deduced and elucidated.

关键词： cathode electrolyte interphase electrolyte additive high voltage cathodes LiBOB nickel-rich cathodes

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Development of a 3D subcutaneous construct containing insulin-producing beta cells using bioprinting

引用

Bio-Design and Manufacturing 2022年第2期5卷 265-276页

作者： Chi B.Ahn Ji-Hyun Lee Joo H.Kim tae H.Kim Hee-Sook Jun Kuk H.son Jin W.Lee Department of Molecular Medicine College of MedicineGachon University155Gaetbeol-roYeonsu-kuIncheonRepublic of Korea Department of Health Sciences and Technology GAIHSTGachon University155Gaetbeol-roYeonsu-kuIncheonRepublic of Korea College of Pharmacy Gachon University191Hambangmoe-roYeonsu-kuIncheonRepublic of Korea Department Thoracic and Cardiovascular Surgery Gachon University Gil Medical CenterCollege of MedicineGachon University21Namdong-daero 774 beon-gilNamdong-guIncheonRepublic of Korea

Type 1 diabetes is caused by insulin deficiency due to the loss of beta cells in the islets of *** severe cases,islet transplantation into the portal vein is ***,due to the loss of transplanted islets and the failure of islet function,the 5-year insulin independence rate of these patients is<50%.In this study,we developed a long-term,insulin-secreting,3 Dbioprinted construct implanted subcutaneously with the aim of preventing islet *** bioprinted construct was fabricated by the multi-layer bioprinting of beta-cell(mouse insulinoma-6:MIN-6)-encapsulated alginate bioink and poly(caprolactone)biodegradable polymer.A glucose response assay revealed that the bioprinted constructs proliferated and released insulin normally during the 4-week in vitro *** MIN-6 generated clusters with a diameter of 100-200μm,similar to the original pancreatic islets in the *** an in vivo study using type 1 diabetes mice,animals implanted with bioprinted constructs showed three times higher insulin secretion and controlled glucose levels at 8 weeks after *** the implanted,bioprinted constructs had a positive effect on insulin secretion in the experimental animals,the survival rate of the implanted group(75%)was three times higher than that of the non-implanted group(25%).The results suggest that the proposed,3 D-bioprinted,subcutaneous construct can be a better alternative to portal vein islet transplantation.

关键词： 3D bioprinting Subcutaneous construct Type 1 diabetes Insulin Beta cells

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：