检索结果-南通市图书馆

Process intensification for the synthesis and purification of battery-grade li_(2)CO_(3)with microfluidics

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第7期90卷 106-117页

作者： Haodu li Jie Zhang lin Dai Le Du Jiqin Zhu The State Key Laboratory of Chemical Resource Engineering College of Chemical EngineeringBeijing University of Chemical TechnologyBeijing 100029China

Battery-grade lithium carbonate(li_(2)CO_(3))with a purity of higher than 99.5 wt%is of great importance as a high value-added lithium ***,influences of different reaction systems and process control on product purity remain ***,a membrane dispersion microreactor was used to enhance the mass transfer of preparation and purification processes in homogeneous and heterogeneous *** systems of Na_(2)CO_(3)–liCl,NH_(4)HCO_(3)–liCl,and NH_(3)·H_(2)O−CO_(2)−liCl,CO_(2)purification based on carbonation and decomposition were *** li_(2)CO_(3)purity was increased by the improvement of mixing *** carbonation time was reduced by 62.5%and 58.3%for the NH_(3)·H_(2)O−CO_(2)and CO_(2)purification systems,*** the two ammonia-based systems,li_(2)CO_(3)particles with a purity of 99.7–99.8 wt%were one-step prepared with a size of 3–5μm,which also met the requirement of the battery-grade *** purity was further increased to 99.9 wt%by CO_(2)purification and liHCO_(3)*** investigation could provide a feasible alternative for the controllable preparation of battery-grade li_(2)CO_(3)in one or multiple steps.

关键词： Microfluidics Battery grade li_(2)CO_(3) Process intensification High purity

Cardiac energy metabolism disorder mediated by energy substrate imbalance and mitochondrial damage upon tebuconazole exposure

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第2期136卷 270-278页

作者： Tingting ku Jindong Hu Mengmeng Zhou Yuanyuan Xie Yutong liu Xin Tan lin Guo Guangke li Nan Sang College of Environmental Science and Resources Research Center of Environment and HealthShanxi UniversityTaiyuan 030006China

Tebuconazole exposure has been described as an increasing hazard to human *** increasing number of recent studies have shown a positive association between tebuconazole exposure and cardiovascular disease risk,which is characterized by the reduction of adenosine triphosphate(ATP)***,researches on the damage of tebuconazole exposure to energy metabolism and the related molecular mechanisms are *** the present study,male C57BL/6 mice were treated with tebuconazole at different low concentrations for 4 *** results indicated that tebuconazole could accumulate in the heart and further induce the decrease of ATP content in the mouse ***,tebuconazole induced an obvious shift in substrate utilization of fatty acid and glucose by disrupting their corresponding transporters(GLUT1,GLUT4,CD36,FABP3 and FATP1)expression,and significantly repressed the expression of mitochondrial biogenesis(Gabpa and Tfam)and oxidative phosphorylation(CS,Ndufa4,Sdhb,Cox5a and Atp5b)related genes in a dosedependent *** investigation revealed that these alterations were related to the IRS1/AKT and PPARγ/RXRα*** findings contribute to a better understanding of triazole fungicide-induced cardiovascular disease by revealing the key indicators associated with this phenomenon.

关键词： Tebuconazole Cardiotoxicity Energy metabolic disorders Energy substrate Mitochondrial damage

Accelerating lithium-sulfur battery reaction kinetics and inducing 3D deposition of li_(2)S using interactions between Fe_(3)Se_(4)and lithium polysulfides

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第8期95卷 540-553,I0012页

作者： Yihan lin liheng li Longjie Tan Yongliang li Xiangzhong Ren Peixin Zhang Chuanxin He lingna Sun College of Chemistry and Environmental Engineering Shenzhen UniversityShenzhen 518060GuangdongChina

Although lithium-sulfur batteries(LSBs)exhibit high theoretical energy density,their practical application is hindered by poor conductivity of the sulfur cathode,the shuttle effect,and the irreversible deposition of li_(2)*** address these issues,a novel composite,using electrospinning technology,consisting of Fe_(3)Se_(4)and porous nitrogen-doped carbon nanofibers was designed for the interlayer of *** porous carbon nanofiber structure facilitates the transport of ions and electrons,while the Fe_(3)Se_(4)material adsorbs lithium polysulfides(liPSs)and accelerates its catalytic conversion ***,the Fe_(3)Se_(4)material interacts with soluble liPSs to generate a new polysulfide intermediate,li_(x)FeS_(y)complex,which changes the electrochemical reaction pathway and facilitates the three-dimensional deposition of li_(2)S,enhancing the reversibility of *** designed LSB demonstrates a high specific capacity of1529.6 mA h g^(-1)in the first cycle at 0.2 *** rate performance is also excellent,maintaining an ultra-high specific capacity of 779.7 mA h g^(-1)at a high rate of 8 *** investigation explores the mechanism of the interaction between the interlayer and liPSs,and provides a new strategy to regulate the reaction kinetics and li_(2)S deposition in LSBs.

关键词： lithium-sulfur batteries Polysulfide intermediates li_(2)S electrodeposition Interlayers Electrostatic spinning Adsorption Catalysis

A li_(3)P nanoparticle dispersion strengthened ultrathin li metal electrode for high energy density rechargeable batteries

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第5期17卷 4031-4038页

作者： lin Fu Xiancheng Wang Bao Zhang Zihe Chen Yuanjian li Yongming Sun Provincial Guizhou Key Laboratory of Green Chemical and Clean Energy Technology School of Chemistry and Chemical EngineeringGuizhou UniversityGuiyang 550025China Wuhan National Laboratory for Optoelectronics Huazhong University of Science and TechnologyWuhan 430074China School of Physical and Mathematical Sciences Nanyang Technological UniversitySingapore 637371Singapore Institute of Materials Research and Engineering Agency for Science Technology and Research(A*STAR)Singapore 138634Singapore

Achievement of lithium(li)metal anode with thin thickness(e.g.,≤30µm)is highly desirable for rechargeable high energy density ***,the fabrication and application of such thin li metal foil electrode remain challenging due to the poor mechanical processibility and inferior electrochemical performance of metallic ***,mechanico-chemical synthesis of robust ultrathin li/li_(3)P(LLP)composite foils(~15µm)is demonstrated by employing repeated mechanical rolling/stacking operations using red P and metallic li as raw *** in-situ formed li+-conductive li_(3)P nanoparticles in metallic li matrix and their tight bonding strengthen the mechanical durability and enable the successful fabrication of free-standing ultrathin li metal composite ***,it also reduces the electrochemical li nucleation barrier and homogenizes li plating/stripping *** matching to high-voltage liCoO_(2),the full cell with a low negative/positive(N/P)capacity ratio of~1.5 offers a high energy density of~522 W·h·kg^(-1) at 0.5 C based on the mass of cathode and *** into account its facile manufacturing,potentially low cost,and good electrochemical performance,we believe that such an ultrathin composite li metal foil design with nanoparticle-dispersion-strengthened mechanism may boost the development of high energy density li metal batteries.

关键词： lithium metal anode high energy density battery mechanico-chemical synthesis ultrathin li/li_(3)P composite foil low negative/positive capacity ratio

Catalytic anode surface enabling in situ polymerization of gel polymer electrolyte for stable li metal batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第6期17卷 5216-5223页

作者： Guocheng li Kang liang Yuanjian li Xiangrui Duan lin Fu Zhao Cai Zhaofu Zhang Jiangnan Dai Yongming Sun Wuhan National Laboratory for Optoelectronics Huazhong University of Science and TechnologyWuhan 430074China The Institute of Technological Sciences Wuhan UniversityWuhan 430074China Faculty of Materials Science and Chemistry China University of Geoscience(Wuhan)Wuhan 430074China

Employing quasi-solid-state gel polymer electrolyte(GPE)instead of the liquid counterpart has been regarded as a promising strategy for improving the electrochemical performance of li metal ***,the poor and uneven interfacial contact between li metal anode and GPE could cause large interfacial resistance and electrochemical li stripping/plating inhomogeneity,deteriorating the electrochemical ***,we proposed that the functional component of composite anode could work as the catalyst to promote the in situ polymerization reaction,and we experimentally realized the integration of polymerized-dioxolane electrolyte and li/li_(22)Sn_(5)/liF composite electrode with low interfacial resistance and good stability by in situ catalyzation ***,the reaction kinetics and stability of metallic li anode were significantly *** a demonstration,symmetric cell using such a GPE-li/li_(22)Sn_(5)/liF integration achieved stable cycling beyond 250 cycles with small potential hysteresis of 25 mV at 1 mA·cm^(−2)and 1 mAh·cm^(−2),far outperforming the counterpart regular GPE on pure *** with lini0.5Co0.3Mn0.2O2,the full cell with the GPE-li/li_(22)Sn_(5)/liF integration maintained 85.7%of the original capacity after 100 cycles at 0.5 C(1 C=200 mA·g^(−1)).Our research provides a promising strategy for reducing the resistance between GPE and li metal anode,and realizes li metal batteries with enhance electrochemical performance.

关键词： catalyzation polymerization interface resistance interfacial stability li metal batteries electrochemical performance

VOC emitted by biopharmaceutical industries:Source profiles,health risks,and secondary pollution

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第1期135卷 570-584页

作者： Jiawei Ma lin li State Key Laboratory of Environmental Aquatic Chemistry Research Center for Eco-Environmental SciencesChinese Academy of SciencesBeijing 100085China University of Chinese Academy of Sciences Beijing 100049China National Engineering Laboratory for VOCs Pollution Control Material&Technology University of Chinese Academy of SciencesBeijing 101408China

The biopharmaceutical industry contributes substantially to volatile organic compounds(VOCs)emissions,causing growing concerns and social developmental *** study conducted an on-site investigation of the process-based emission of VOCs from three biopharmaceutical *** the workshops of the three enterprises,26 VOCs were detected,which could be sorted into 4 classes:hydrocarbons,aromatic hydrocarbons,oxygen-containing compounds,and nitrogen-containing *** were the main components of waste gases,accounting for 44.13%-77.85%of the overall ***-based source profiles were compiled for each process unit,with the fermentation and extraction units of tiamulin fumarate being the main source of VOC *** heptanone,vinyl acetate,diethylamine,propylene glycol methyl ether(PGME),and benzene were screened as priority pollutants through a fuzzy comprehensive evaluation *** level concentration simulation results of the Gauss plume diffusion model demonstrated that the diffusivity of VOCs in the atmosphere was relatively high,indicating potential non-carcinogenic and carcinogenic risks 1.5-2 km ***,the process-based formation potentials of ozone and secondary organic aerosols(SOAs)were determined and indicated that N-methyl-2-pyrrolidone,dimethyl heptanone,and PGME should be preferentially controlled to reduce the ozone formation potential,whereas the control of benzene and chlorobenzene should be prioritized to reduce the generation of *** results provide a basis for understanding the characteristics of VOC emission by biopharmaceutical industries and their diffusion,potentially allowing the development of measures to reduce health risks and secondary pollution.

关键词： Biopharmaceutical Volatile organic compound Priority pollutant Exposure risk Secondary pollution

Selective photosynthesis of imines from biomass-derived aldehydes over Ni/TiO_(2)

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第3期43卷 1116-1124页

作者： Wu-lin li Qing-Qing Zhang lin Dong Wen-Jun Zhang li-li lin Zu-Peng Chen Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources International Innovation Center for Forest Chemicals and MaterialsCollege of Chemical EngineeringNanjing Forestry UniversityNanjing210037China Institute of Industrial Catalysis State Key Laboratory of Green Chemistry Synthesis TechnologyCollege of Chemical EngineeringZhejiang University of TechnologyHangzhou310014China

Photocatalytic reductive amination of biomass-derived aldehydes is a desirable way to selectively upgrade biomass into value-added nitrogen-containing chemicals under mild ***,it is challenging to produce imines in high selectivity because of the undesirable side reactions caused by the activity of functional ***,we demonstrate the highly reactive and selective production of imines from biomass derived aldehydes via the photocatalytic reductive amination,using a defective TiO_(2)supported nickel *** employment of methanol as the hydrogen donor and ammonia solution as the nitrogen source avoids the use of high-pressure H_(2)and expensive amines,rendering the current catalytic process safe,economical,and environmentally *** depth investigations attribute the improved separation and transfer of photogenerated charge carriers to the presence of oxygen vacancies and decorated Ni nanoparticles,thereby accelerating the production of imines from benzaldehyde amination(conversion,95.8%;seleetivity,95.2%).Furthermore,the developed system could be easily translated to the photocatalytic conversions of various biomass derived aldehydes,which provided an example of a cost-effective and sustainable approach for the valorization of biomass derived feedstocks.

关键词： Photocatalysis Biomass derivatives Imines Reduction amination Heterogeneous catalyst

Numerical Simulation on Radon Retardation Behavior of Covering Floats in Radon-Containing Water

在线全文

学校读者我要写书评

暂无评论

Biomedical and Environmental Sciences 2024年第4期37卷 406-417页

作者： liU Shu Yuan ZHANG li YE Yong Jun DING ku Ke National Institute for Radiological Protection Chinese Center for Disease Control and PreventionBeijing 100088China Office for Public Health Management Chinese Center for Disease Control and PreventionBeijing 102206China Key Discipline Laboratory for National Defense for Biotechnology in Uranium Mining and Hydrometallurgy University of South ChinaHengyang 421001HunanChina

Objective This study aimed to efficiently reduce the release of radon from water bodies to protect the *** Based on the sizes of the experimental setup and modular float,computational fluid dynamics(CFD)was used to assess the impact of the area coverage rate,immersion depth,diffusion coefficient,and radon transfer velocity at the gas–liquid interface on radon migration and exhalation of radon-containing *** on the numerical simulation results,an estimation model for the radon retardation rate was *** effectiveness of the CFD simulation was evaluated by comparing the experimental and simulated variation values of the radon retardation rate with the coverage area *** The effect of radon transfer velocity on radon retardation in water bodies was minor and insignificant according to the appropriate value;therefore,an estimation model of the radon retardation rate of the coverage of a radon-containing water body was constructed using the synergistic impacts of three factors:area coverage rate,immersion depth,and diffusion *** deviation between the experimental and simulated results was<4.3%.Conclusion Based on the numerical simulation conditions,an estimation model of the radon retardation rate of covering floats in water bodies under the synergistic effect of multiple factors was obtained,which provides a reference for designing covering floats for radon retardation in radoncontaining water.

关键词： Radon-containing water Radon retardation rate CFD Coverage experiment Optimized design

Solid solution strategy modulated defects engineering of (Cr1-xVx)2AlC MAX phase toward superior electromagnetic wave absorption

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第7期43卷 3205-3219页

作者： Ji-lin Gou Yu-Kai Chang Shu liu Peng-Hui li Ping-Hao Cui Qian-ku Hu li-Bo Wang Xin Zhang Jun-Kai Wang Qi-Xun Xia Ai-Guo Zhou School of Materials Science and Engineering Henan Polytechnic University Key Laboratory for Microstructural Material Physics of Hebei Province School of ScienceYanshan University State Key Laboratory of Metastable Materials Science and Technology Yanshan University

Defects engineering is an effective strategy for manipulating electromagnetic parameters and enhancing electromagnetic wave（EMW） absorption ***,the relationship between them is not clear,especially in solid solution *** this work,a series of(Cr1-xVx)2AlC MAX phase solid solutions with layered structure were prepared via tuning the ratio of Cr and V to explore their EMW absorption *** experimental results indicated that the doping of V atoms at the M-site could effectively regulate its impedance matching and EMW absorption properties by introducing appropriate numbers of defects in the crystal,such as twin boundaries,dislocations and lattice *** them,if Cr:V=3:1,Cr1.5V0.5AlC,as radar absorption materials,could reach a strong reflection loss of-51.8 dB at the frequency of 12.8 GHz under an ultra-thin thickness of 1.3 *** reflection loss value could attain-10 dB in a wide frequency range of 2.7-18 GHz and thickness range of 1-5 *** addition,after high temperature and acid-alkali immersion treatment,this sample still had good EMW absorption capability,and the effective absorption bandwidth was enhanced from 2.3 to 2.6 GHz after concentrated acid immersion or 3.1 GHz after concentrated alkali *** work has great reference significance for the research and development of high-performance MAX-based EMW absorption materials in harsh environments.

关键词： MAX phases Solid solution Defects engineering Electromagnetic wave absorption Harsh environments