检索结果-南通市图书馆

Correlation between platinum–aluminide coating features and tensile behavior of nickel-based superalloy Rene?80

Rare Metals 2024年第10期43卷 5391-5402页

作者： Mohammad Mehdi Barjesteh Seyed Mehdi Abbasi Karim Zangeneh Madar kourosh shirvani Metallic Materials Research Center Malek Ashtar University of Technology (MUT) Department of Advanced Materials and New Energies Iranian Research Organization for Science and Technology (IROST)

The effect of platinum （a rare metal）–aluminide coating parameters on the tensile properties of nickel-based superalloy Rene?80 was evaluated at 871。*** this purpose,initial layers of platinum with different thicknesses （2,4,6 and 8μm） were coated on tensile samples Then,low-temperature high-activity （LTHA） and hightemperature low-activity （HTLA） processes were used for *** of microstructural evaluations using scanning electron microscope （SEM） and phase analysis by X-ray diffraction （XRD） showed a three-layer structure coating for different platinum layer thicknesses and both aluminizing *** the thickness of the platinum layer from 2 to 8μm led to the improvement in the final coating thickness from 91.6 to 102.1μm in *** increase was from 128.1 to 148.6 μm in *** results of hot tensile tests at 871℃ showed a decrease in strength properties of the coated samples compared to the uncoated ***,HTLA and high thicknesses of the initial platinum layer showed an intense *** results of fractographic evaluations abou uncoated samples showed a ductile *** the other hand,coated samples showed a simultaneous ductile and brittle fracture failure *** the main fracture morphology was brittle cleavage fracture which was for the HTLA.

关键词： Aluminizing Fractography Platinum–aluminide Rene®80 Tensile properties

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Weldability and liquation cracking behavior of ZhS6U superalloy during electron-beam welding

引用

International Journal of Minerals,Metallurgy and Materials 2019年第2期26卷 251-259页

作者： Arash Khakzadshahandashti Mohammad Reza Rahimipour kourosh shirvani Mansour Razavi Department of Ceramic Materials and Energy Research Center Department of Material and Renewal Energy Iranian Research Organization for Science and Technology (IROST)

The weldability of the ZhS6U nickel-based superalloy, which is prone to solidification cracking during electron-beam welding(EBW) repair processes, was investigated. The effects of two different pre-weld heat-treatment cycles on the final microstructure before and after welding were examined. Welds were made on flat coupons using an EBW machine, and the two heat-treatment cycles were designed to reduce γ′ liquation before welding. Microstructural features were also examined by optical and scanning electron microscopy. The results showed that the change in the morphology and size of the γ′ precipitates in the pre-weld heat-treatment cycles changed the ability of the superalloy to release the tensile stresses caused by the matrix phase cooling after EBW. The high hardness in the welded coupons subjected to the first heat-treatment cycle resulted in greater resistance to stress release by the base alloy, and the concentration of stress in the base metal caused liquation cracks in the heat-affected zone and solidification cracks in the weld area.

关键词： weldability ZhS6U superalloy electron beam welding heat-affected zone liquation cracking pre-weld heat treatment

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of prior cyclic oxidation on high temperature low cycle fatigue life of bare and Pt-Al coated superalloy Rene®80

引用

Journal of Central South University 2022年第1期29卷 43-59页

作者： Mohammad Mehdi Barjesteh Karim Zangeneh Madar Seyed Mehdi Abbasi kourosh shirvani Faculty of Materials and Manufacturing Technologies Malek Ashtar University of Technology(MUT)Babaie streetLavizan15875-1774TehranIran Department of Advanced Materials and New Energies Iranian Research organization for Science and Technology(IROST)33535-111TehranIran

The prediction of fatigue life of metallic alloys is justly accepted as one of the most important phenomena in the field of metallurgical and mechanical *** elevated temperatures,oxidation of the surfaces has an effective role in the fatigue strength and ductility of the *** the present work,the effect of prior cyclic oxidation on the high temperature low cycle fatigue(HTLCF)properties of nickel-based superalloy Rene®80 has been assessed in the uncoated state and in the Pt-aluminide(Pt-Al)coated condition at 930℃.To apply cyclic oxidation,simulation of engine thermal exposure was carried out by exposing coated and uncoated fatigue specimens in the burner rig(120 cycles at 1100℃).The cyclic oxidation procedure led to a changing in the coating microstructure from the dual-phase(ξ-PtAl_(2)+β-(Ni,Pt)Al)to single phase(β-(Ni,Pt)Al).Results of HTLCF tests showed an improvement in the HTLCF life around 11.5%in the unexposed coated specimen(pre-cyclic oxidation)as compared to unexposed bare specimen,while this rise for exposed coated specimen(post-cyclic oxidation)was only 5%.Although a mixed mode fracture morphology(ductile and brittle)was observed on the fracture surfaces of failed specimens,the wider regions of brittle fracture belonged to exposed coated/uncoated ones.

关键词： Rene®80 superalloy Pt-aluminide cyclic oxidation low cycle fatigue fractography

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：