检索结果-南通市图书馆

World Journal of Clinical Cases 2024年第5期12卷 913-921页

作者： Tae In kim Sung Yong Han Jonghyun Lee Dong Uk kim Division of Gastroenterology Biomedical Research InstitutePusan National University HospitalBusan 49241South Korea Department of Internal Medicine Pusan National UniversityCollege of MedicineYangsan 50612South Korea

BACKGROUND Intrahepatic duct(IHD)stones are among the most important risk factors for cholangiocarcinoma(CCC).Approximately 10%of patients with IHD stones develop CCC;however,there are limited studies regarding the effect of IHD stone removal on CCC *** To investigate the association between IHD stone removal and CCC *** We retrospectively analyzed 397 patients with IHD stones at a tertiary referral center between January 2011 and December *** CCC occurred in 36 of the 397 enrolled *** univariate analysis,chronic hepatitis B infection(11.1%vs 3.0%,P=0.03),carbohydrate antigen 19-9(CA19-9,176.00 vs 11.96 II/mL,P=0.010),stone located in left or both lobes(86.1%vs 70.1%,P=0.042),focal atrophy(52.8%vs 26.9%,P=0.001),duct stricture(47.2%vs 24.9%,P=0.004),and removal status of IHD stone(33.3%vs 63.2%,Pupper normal limit,carcinoembryonic antigen>upper normal limit,stones located in the left or both lobes,focal atrophy,and complete removal of IHD stones without recurrence were independent factors influencing CCC ***,the type of removal method was not associated with CCC *** Complete removal of IHD stones without recurrence could reduce CCC risk.

关键词： Intrahepatic bile duct stone Cholangiocarcinoma Percutaneous transhepatic cholangioscopy Endoscopic retrograde cholangiopancreatography Carbohydrate antigen 19-9

Modeling asymmetric fracture mechanics of Mg alloy wire in drawing process

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第5期12卷 2057-2069页

作者： Sunghoon Choi Jongwon Shin Joung Sik Suh Dongchoul kim Department of Mechanical Engineering Sogang UniversitySeoul04107Republic of Korea Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea

In this study,a numerical analysis was conducted on the ductile fracture of a 2-mm diameter Mg-1Zn-0.5Mn-0.5Sr-0.1Ca alloy wire during *** hexagonally close-packed crystal structure of Mg alloys causes asymmetric fracture behavior,especially in the compression *** aim of this study is to develop a comprehensive damage model for Mg alloy wire that accurately predicts ductile fracture,with a focus on the compression region.A novel experimental method was introduced to measure the ductile fracture of Mg alloy wires under different stress *** wire drawing process was simulated using the Generalized Incremental Stress-State dependent damage(GISSMO)Model and the Semi-Analytical Model for Polymers(SAMP)*** damage model's prediction and the experimental results were found to be in excellent agreement,especially in determining crack *** analysis established a safe zone diagram for die angle and reduction ratio,and experimental validation confirmed the feasibility of this *** proposed damage model can provide a practical and reliable analysis for optimizing the drawing process of Mg alloy wire.

关键词： Mg alloy Wire drawing Finite element method Damage model Safe zone diagram

α1-COP modulates plasmodesmata function through sphingolipid enzyme regulation

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Plant Biology 2024年第8期66卷 1639-1657页

作者： Arya Bagus Boedi Iswanto Minh Huy Vu Jong Cheol Shon Ritesh Kumar Shuwei Wu Hobin Kang Da-Ran kim Geon Hui Son Woe Yoen kim Youn-Sig Kwak Kwang Hyeon Liu Sang Hee kim Jae-Yean kim Division of Applied Life Science(BK21 FOUR Program) Plant Molecular Biology and Biotechnology Research CenterGyeongsang National UniversityJinju 52828Korea College of Pharmacy and Research Institute of Pharmaceutical Sciences Kyungpook National UniversityDaegu 702-701Korea Departement of Plant Medicine Gyeongsang National UniversityJinju 52828Korea Division of Life Science Gyeongsang National UniversityJinju 52828Korea

Callose,aβ-1,3-glucan plant cell wall polymer,regulates symplasmic channel size at plasmodesmata(PD)and plays a crucial role in a variety of plant ***,elucidating the molecular mechanism of PD callose homeostasis is *** screened and identified an Arabidopsis mutant plant with excessive callose deposition at PD and found that the mutated gene wasα1-COP,a member of the coat protein I(COPI)coatomer *** report that loss of function ofα1-COP elevates the callose accumulation at PD by affecting subcellular protein localization of callose degradation enzyme Pd *** process is linked to the functions of ERH1,an inositol phosphoryl ceramide synthase,and glucosylceramide synthase through physical interactions with theα1-COP ***,the loss of function ofα1-COP alters the subcellular localization of ERH1 and GCS proteins,resulting in a reduction of Glc Cers and Glc HCers molecules,which are key sphingolipid(SL)species for lipid raft *** findings suggest thatα1-COP protein,together with SL modifiers controlling lipid raft compositions,regulates the subcellular localization of GPI-anchored PDBG2 proteins,and hence the callose turnover at PD and symplasmic movement of *** findings provide the first key clue to link the COPI-mediated intracellular trafficking pathway to the callose-mediated intercellular signaling pathway through PD.

关键词： callose coatomer proteins membrane-bound vesicle plasmodesmata sphingolipid enzymes

Nanoparticle Exsolution on Perovskite Oxides:Insights into Mechanism,Characteristics and Novel Strategies

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第2期16卷 312-346页

作者： Yo Han kim Hyeongwon Jeong Bo‑Ram Won Hyejin Jeon Chan‑ho Park Dayoung Park Yeeun kim Somi Lee Jae‑ha Myung Department of Materials Science and Engineering Incheon National UniversityIncheon 22012Republic of Korea

Supported nanoparticles have attracted considerable attention as a promising catalyst for achieving unique properties in numerous applications,including fuel cells,chemical conversion,and *** demonstrate high activity by expanding the number of active sites,but they also intensify deactivation issues,such as agglomeration and poisoning,*** for bottomup synthesis of supported nanoparticles has emerged as a breakthrough technique to overcome limitations associated with conventional *** are uniformly exsolved from perovskite oxide supports and socketed into the oxide support by a one-step reduction *** uniformity and stability,resulting from the socketed structure,play a crucial role in the development of novel ***,tremendous research efforts have been dedicated to further controlling exsolution *** effectively address exsolution at a more precise level,understanding the underlying mechanism is *** review presents a comprehensive overview of the exsolution mechanism,with a focus on its driving force,processes,properties,and synergetic strategies,as well as new pathways for optimizing nanocatalysts in diverse applications.

关键词： Supported nanoparticle Exsolution In situ growth Mechanism Perovskite oxide Catalyst

Advances in advanced solution-synthesis-based structural materials for tactile sensors and their intelligent applications

在线全文

学校读者我要写书评

暂无评论

InfoMat 2024年第1期6卷 31-64页

作者： Hongsen Niu Ning Li Eun-Seoung kim Young Kee Shin Nam-Young kim Guozhen Shen Yang Li School of Information Science and Engineering University of JinanJinanthe People's Republic of China RFIC Centre Department of Electronics EngineeringKwangwoon UniversitySeoulRepublic of Korea Department of Molecular Medicine and Biopharmaceutical Sciences Seoul National UniversitySeoulRepublic of Korea School of Integrated Circuits and Electronics Beijing Institute of TechnologyBeijingthe People's Republic of China School of Microelectronics Shandong UniversityJinanthe People's Republic of China

Intelligent applications,with tactile sensors at their core,represent significant advancement in the field of artificial ***,achieving perception abilities in tactile sensors that match or exceed human skin remains a formidable ***,the design and implementation of hierarchical structural materials are considered the optimal solution to this *** contrast to conventional methods,such as complicated lithography and three-dimensional printing,the cost-effective and scalable nature of advanced solution-synthesis methods makes them ideal for preparing diverse tactile sensors with hierarchical structural ***,the process and applicability of advanced solution synthesis methods have yet to form a seamless ***,the development and intellectualization of tactile sensors based on advanced solution synthesis methods are still in their early stages,and require a comprehensive and systematic review to usher in *** study delves into the advantages and disadvantages of various advanced solution synthesis methods,providing detailed ***,the positive effects of hierarchical structural materials constructed using these methods in tactile sensors and their intelligent applications are also discussed in ***,the challenges and future opportunities faced by this emerging field are summarized.

关键词： aqueous phase reduction artificial intelligence hydrothermal growth in situ polymerization tactile sensor

Evaluation of internal void related defects in reinforced concrete slab using electromagnetic wave properties

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第3期23卷 525-535页

作者： Minju Kang Jinyoung Hong Taemin Lee Doyun kim Hajin Choi School of Architecture Soongsil UniversitySeoul 06978Republic of Korea

This study aims to develop a damage-detection algorithm based on the electromagnetic wave properties inside a reinforced concrete *** proposed method involves employing two algorithms based on data measured using ground-penetrating radar—a common electromagnetic wave method in civil *** possible defect area was identified based on the energy dissipated by the damage in the frequency-wavenumber domain,with the damage localized using the calculated relative permittivity of the *** proposed method was verified through a finite difference time-domain-based numerical analysis and a testing slab with artificial *** a result of verification,the proposed method quickly identified the presence of damage inside the concrete,especially for honeycomb-like defects located at the top of the *** study has practical significance in scanning structures over a large area more quickly than other non-destructive testing methods,such as ultrasonic methods.

关键词： GPR concrete defect electromagnetic wave relative permittivity non-destructive testing(NDT)

Adhesion performance of alkali-activated material for 3-dimensional printing of tunnel linings at different temperatures

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第1期18卷 66-79页

作者： Yaxin TAO Xiaodi DAI Geert de SCHUTTER kim Van TITTELBOOM Department of Structural Engineering and Building Materials Ghent UniversityGhent 9052Belgium

Robotic-based technologies such as automated spraying or extrusion-based 3-dimensional(3D)concrete printing can be used to build tunnel linings,aiming at reducing labor and mitigating the associated safety issues,especially in the high-geothermal ***-based 3D concrete printing(3DCP)has additional advantages over automated sprayings,such as improved surface quality and no ***,the effect of different temperatures on the adhesion performance of 3D-printed materials for tunnel linings has not been *** study developed several alkali-activated slag mixtures with different activator modulus ratios to avoid the excessive use of Portland cement and enhance sustainability of 3D printable *** thermal responses of the mixtures at different temperatures of 20 and 40℃ were *** adhesion strength of the alkali-activated material was evaluated for both early and later ***,the structural evolution of the material exposed to different temperatures was *** was followed by microstructure *** indicate that elevated temperatures accelerate material reactions,resulting in improved early-age adhesion ***,higher temperatures contribute to the development of a denser microstructure and enhanced mechanical strength in the hardened stage,particularly in mixtures with higher silicate content.

关键词： alkali-activated material 3DCP tunnel lining high-geothermal environment adhesion

In situ infrared, Raman and X-ray spectroscopy for the mechanistic understanding of hydrogen evolution reaction

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第3期90卷 632-651,I0014页

作者： Andi Haryanto Kyounghoon Jung Chan Woo Lee Dong-Wan kim Department of Chemistry Kookmin UniversitySeoul 02707Republic of Korea School of Civil Environmental and Architectural EngineeringKorea UniversitySeoul 02841Republic of Korea

Hydrogen production by water reduction reactions has received considerable attention because hydrogen is considered a clean-energy carrier,key for a sustainable energy *** methods have been widely used to study the reaction mechanism of the hydrogen evolution reaction(HER),but the calculation results need to be supported by experimental results and direct evidence to confirm the mechanistic *** this review,we discuss the fundamental principles of the in situ spectroscopic strategy and a theoretical model for a mechanistic understanding of the *** addition,we investigate recent studies by in situ Fourier transform infrared(FTIR),Raman spectroscopy,and X-ray absorption spectroscopy(XAS) and cover new findings that occur at the catalyst-electrolyte interface during *** spectroscopic strategies provide practical ways to elucidate catalyst phase,reaction intermediate,catalyst-electrolyte interface,intermediate binding energy,metal valency state,and coordination environment during HER.

关键词： Hydrogen evolution reaction Infrared spectroscopy Raman spectroscopy X-ray absorption spectroscopy Reaction mechanism

Functionally graded structure of a nitride-strengthened Mg_(2)Si-based hybrid composite

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 1239-1256页

作者： Jeongho Yang Woongbeom Heogh Hogi Ju Sukhyun Kang Tae-Sik Jang Hyun-Do Jung Mohammad Jahazi Seung Chul Han Seong Je Park Hyoung Seop kim Susmita Bose Amit Bandyopadhyay Martin Byung-Guk Jun Young Won kim Dae-kyeom kim Rigoberto CAdvincula Clodualdo Aranas Jr Sang Hoon kim School of Mechanical Engineering Pusan National UniversityBusan 46241Republic of Korea Department of Mechanical Design Engineering Hanyang UniversitySeoul 04763Republic of Korea Process Research 3 Team LG Display Co.Ltd.PajuGyeonggi-do 10845Republic of Korea Department of Materials Science and Engineering Chosun UniversityGwangju 61452Republic of Korea Institute of Well-Aging Medicare&Chosun University LAMP Center Chosun UniversityGwangju 61452Republic of Korea Division of Materials Science and Engineering Hanyang UniversitySeoul 04763Republic of Korea Department of Mechanical Engineering École de Technologie SupérieureMontrealQuebec H3C 1K3Canada Material&Component Convergence R&D Center Korea Construction Equipment Technology InstituteGunsanJeollabuk-do 54002Republic of Korea School of Mechanical and Aerospace Engineering Nanyang Technological UniversitySingapore 639798Singapore Graduate Institute of Ferrous&Eco Materials Technology Pohang University of Science and TechnologyPohangGyeongsangbuk-do 37673Republic of Korea Advanced Institute for Materials Research Tohoku UniversitySendai 980-8577Japan Institute for Convergence Research and Education in Advanced Technology Yonsei UniversitySeoul 03722Republic of Korea School of Mechanical and Materials Engineering Washington State UniversityPullmanWashington 99164USA School of Mechanical Engineering Purdue UniversityWest LafayetteIndiana 47907USA Research Institute of Advanced Manufacturing Technology Korea Institute of Industrial TechnologyIncheon 21999Republic of Korea Department of Macromolecular Science and Engineering Case Western Reserve UniversityClevelandOhio 44106USA Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials University of TennesseeKnoxvilleTennessee 37996USA Center for Nanophase Materials and Sciences Oak Ridge National LaboratoryOak RidgeTennessee 37830USA Department of Mechanical Engineering University of New BrunswickFrederictonNew Brunswick E3B 5A3Cana

The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed *** is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid *** study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive *** strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid ***,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional *** outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.

关键词： Laser powder bed fusion Mg_(2)Si-SiC/nitride hybrid composite Both the thermal diffusion-and chemical reaction-based metallurgy Functionally graded structure Compositional gradient Wear resistance.

Construction of a High‑Performance Composite Solid Electrolyte Through In‑Situ Polymerization within a Self‑Supported Porous Garnet Framework

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第5期16卷 56-70页

作者： An‑Giang Nguyen Min‑Ho Lee Jaekook kim Chan‑Jin Park Department of Materials Science and Engineering Chonnam National University77 Yongbong‑roBuk‑guGwangju 61186South Korea

Composite solid electrolytes(CSEs)have emerged as promising candidates for safe and high-energy–density solid-state lithium metal batteries(SSLMBs).However,concurrently achieving exceptional ionic conductivity and interface compatibility between the electrolyte and electrode presents a significant challenge in the development of high-performance CSEs for *** overcome these challenges,we present a method involving the in-situ polymerization of a monomer within a self-supported porous Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZT)to produce the *** synergy of the continuous conductive LLZT network,well-organized polymer,and their interface can enhance the ionic conductivity of the CSE at room ***,the in-situ polymerization process can also con-struct the integration and compatibility of the solid electrolyte–solid electrode *** synthesized CSE exhibited a high ionic conductivity of 1.117 mS cm^(-1),a significant lithium transference number of 0.627,and exhibited electrochemical stability up to 5.06 V ***/Li+at 30℃.Moreover,the Li|CSE|LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cell delivered a discharge capacity of 105.1 mAh g^(-1) after 400 cycles at 0.5 C and 30℃,corresponding to a capacity retention of 61%.This methodology could be extended to a variety of ceramic,polymer electrolytes,or battery systems,thereby offering a viable strategy to improve the electrochemical properties of CSEs for high-energy–density SSLMBs.

关键词： Scalable tape-casting method Self-supported porous Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12) Composite solid electrolyte LiF-and B-rich interphase layers