检索结果-南通市图书馆

Journal of Energy Chemistry 2021年第10期30卷 155-162,I0005页

作者： Kyuhwan Hyun Joonyoung lee Suhyeon kang Yongchai Kwon Graduate School of Energy and Environment Seoul National University of Science and Technology232 Gongneung-roNowon-guSeoul 01811Republic of Korea Department of Chemical and Biomolecular Engineering Seoul National University of Science and Technology232 Gongneung-roNowon-guSeoul 01811Republic of Korea

A glucose oxidation catalyst comprising carbon nanotube,tetrathiafulvalene(TTF),gelatin,glutaraldehyde(GA)and glucose oxidase(GOx)(CNT/[TTF-GOx]/Gelatin+GA)is suggested to enhance the reactivity of glucose oxidation reaction(GOR),and the performance and stability of enzymatic biofuel cells(EBCs)using this *** this catalyst,TTF is used as mediator to transfer electron effectively,while GA is crosslinked to gelatin to form non-soluble *** structure prevents the dissolution of gelatin from aqueous electrolyte and reduces the leaching-out of GOx and TTF *** confirm the crosslinking effect of GA and gelatin,Fourier-transform infrared spectroscopy(FT-IR)and electrochemical evaluations are *** to FT-IR analysis,it was observed that the amide I peak shifted after *** is evidence showing the appropriate network formation and the reactivity of CNT/[TTFGOx]/Gelatin+GA is well preserved even after multiple potential *** addition,its GOx activity is regularly monitored for one month and the measurements prove that the structure prevents the leaching out of GOx *** on that,EBC using the anodic catalyst shows excellent performances,such as open circuit voltage of 0.75 V and maximum power density of 184μW/cm^(2).

关键词： Enzymatic biofuel cell Tetrathiafulvalene Crosslinking of glutaraldehyde and gelatin Hemi-acetal bond group

Novel Perovskite Oxide Hybrid Nanofibers Embedded with Nanocatalysts for Highly Efficient and Durable Electrodes in Direct CO_(2) Electrolysis

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第5期16卷 214-230页

作者： Akromjon Akhmadjonov Kyung Taek Bae kang Taek lee Department of Mechanical Engineering KAISTDaejeon 34141Republic of Korea KAIST Graduate School of Green Growth and Sustainability Daejeon 34141Republic of Korea

The unique characteristics of nanofibers in rational electrode design enable effec-tive utilization and maximizing material properties for achieving highly efficient and sustainable CO_(2) reduction reactions( CO_(2)RRs)in solid oxide elec-trolysis cells(SOECs).However,practical appli-cation of nanofiber-based electrodes faces chal-lenges in establishing sufficient interfacial contact and adhesion with the dense *** tackle this challenge,a novel hybrid nanofiber electrode,La_(0.6)Sr_(0.4)Co_(0.15)Fe_(0.8)Pd_(0.05)O_(3-δ)(H-LSCFP),is developed by strategically incorporating low aspect ratio crushed LSCFP nanofibers into the excess porous interspace of a high aspect ratio LSCFP nanofiber framework synthesized via electrospinning *** consecutive treatment in 100% H_(2) and CO_(2) at 700°C,LSCFP nanofibers form a perovskite phase with in situ exsolved Co metal nanocatalysts and a high concentration of oxygen species on the surface,enhancing CO_(2) *** SOEC with the H-LSCFP electrode yielded an outstanding current density of 2.2 A cm^(-2) in CO_(2) at 800°C and 1.5 V,setting a new benchmark among reported nanofiber-based *** twinning of the H-LSCFP reveals improved contact adhesion and increased reaction sites for CO_(2)*** present work demonstrates a highly catalytically active and robust nanofiber-based fuel electrode with a hybrid structure,paving the way for further advancements and nanofiber applications in CO_(2)-SOECs.

关键词： Nanofibers Fuel electrodes Digital twinning CO_(2)reduction reaction Solid oxide electrolysis cells

Experiments and computer simulation analysis of impact behaviors of micro-sized abrasive in waterjet cutting of thin multiple layered materials

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2012年第S3期22卷 864-869页

作者： Jung-Han lee kang-Su PARK Myung Chang kang Bo Sik kang Bo Sung SHIN Engineering Research Center Pusan National University National Core Research Center Pusan National University Mechanical System Safety Research Division Korea Institute of Machinery and Materials

The abrasive waterjet (AWJ) is now widely used in the advanced cutting processes of polymers,metals,glass,ceramics and composite materials like thin multiple-layered material (TMM).Various research and development efforts have recently been made to understand the science of ***,the interaction mechanism between a workpiece and high-velocity abrasive particles still remains a complicated *** this work,the material removal mechanisms of AWJ such as micro penetration and micro dent were experimentally *** addition,a new computer simulation model considering high strain rate effect was proposed to understand the micro impact behavior of high-velocity micro-sized abrasives in AWJ cutting.

关键词： abrasive waterjet thin multiple layered materials micro-sized abrasive micro penetration micro dent

Redox sensor QSOX1 regulates plant immunity by targeting GSNOR to modulate ROS generation

在线全文

学校读者我要写书评

暂无评论

Molecular Plant 2021年第8期14卷 1312-1327页

作者： Ho Byoung Chae Min Gab Kim Chang Ho kang Joung hun Park Eun Seon lee Sang-Uk lee Yong hun Chi Seol Ki Paeng Su Bin Bae Seong Dong Wi Byung-Wook Yun Woe-Yeon Kim Dae-Jin Yun David Mackey Sang Yeol lee Division of Applied Life Sciences(BK21)and PMBBRC Gyeongsang National UniversityJinju 52828Korea College of Pharmacy Research Institute of Pharmaceutical ScienceGyeongsang National UniversityJinju 52828Korea School of Applied Biosciences College of Agriculture and Life SciencesKyungpook National UniversityDaegu 41566Korea Department of Biomedical Science and Engineering Konkuk UniversitySeoul 05029Korea Department of Horticulture and Crop Science Department of Molecular Geneticsand Center for Applied Plant SciencesThe Ohio State UniversityColumbusOH 43210USA College of Life Sciences Qingdao Agricultural UniversityQingdao 266109P.R.China Plant Propagation Team Plant Production DivisionSejong National ArboretumSejong 30106Korea

Reactive oxygen signaling regulates numerous biological processes,including stress responses in *** sensors transduce reactive oxygen signals into cellular ***,we present biochemical evidence that a plant quiescin sulfhydryl oxidase homolog(QSOX1)is a redox sensor that negatively regulates plant immunity against a bacterial *** expression level of QSOX1 is inversely correlated with pathogen-induced reactive oxygen species(ROS)***,QSOX1 both senses and regulates ROS levels by interactingn with and mediating redox regulation of S-nitrosoglutathione reductase,which,consistent with previous findings,influences reactive nitrogen-mediated regulation of ROS ***,our data indicate that QSOX1 is a redox sensorthat negatively regulates plant immunity by linking reactive oxygen and reactive nitrogen signaling to limit ROS production.

关键词： redox sensor plant immu nity QSOX1 GSNOR reactive oxygen species(ROS) reactive nitrogen species(RNS)

Dynamic recrystallization behavior and microstructural evolution of Mg alloy AZ31 through high-speed rolling

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2018年第10期34卷 1747-1755页

作者： Jeong hun lee Jong Un lee Sang-Hoon Kim Seok Weon Song Chong Soo lee Sung Hyuk Park Ulsan Regional Division Korea Institute of Industrial Technology School of Materials Science and Engineering Kyungpook National University Technical Research Laboratories POSCO Graduate Institute of Ferrous Technology Pohang University of Science and Technology

High-speed rolling （HSR） is known to improve the workability of Mg alloys significantly, which makes it possible to impose a large reduction in a single pass without fracture. In the present study, dynamic recrystallization （DRX） behavior and microstructural and textural variations of Mg alloy AZ31 dur-ing a HSR process were investigated by conducting rolling with different imposed reductions in the range of 20%-80% at a high rolling speed of 470 m/min and 400℃. High-strain-rate deformation during HSR suppresses dislocation slips but promotes twinning, which results in the formation of numer-ous twins of several types, i.e., {10-12} extension twins, {10-11} and {10-13} contraction twins, and {10-11}-{10-12} double twins. After twinning, high strain energy is accumulated in twin bands because their crystallographic orientations are favorable for basal slips, leading to subsequent DRX at the twin bands. Accordingly, twinning activation and twinning-induced DRX behavior play crucial roles in accommodating plastic deformation during HSR and in varying microstructure and texture of the high- speed-rolled （HSRed） sheets. Area fraction of fine DRXed grains formed at the twin bands increases with increasing rolling reduction, which is attributed to the combined effects of increased strain, strain rate, and deformation temperature and a decreased critical strain for DRX. Size, internal strain, and texture intensity of the DRXed grains are smaller than those of unDRXed grains. Therefore, as rolling reduction increases, average grain size, stored internal energy, microstructural inhomogeneity, and basal texture intensity of the HSRed sheets gradually decrease owing to an increase in the area fraction of the DRXed grains.

关键词： Magnesium alloy High-speed rolling Twinning Dynamic recrystallization Microstructure

Thermal-environment characteristics and comfort of combined radiant-floor (Korean heating system ondol) and convective cooling system

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2013年第12期20卷 3589-3603页

作者： lee kang-Guk HONG Won-Hwa School of Architecture Kyungpook National University

The thermal-environment characteristics of the existing forced-convection cooling system were compared with those of the convective cooling system, which combined the radiant-floor cooling system using floor-heating panel typically applied to apartments in South Korea with the forced-convection cooling system using improved fan coil unit. The subjective warm/cool-feeling responses to the combined radiant-floor and convective cooling system in the questionnaire survey conducted among the test subjects were analyzed to establish the basic data for the combined cooling system. The results show that in the thermal-equilibrium condition, the vertical air temperature difference in the model living room is larger in the forced-convection-cooling condition. Most of the subjects feel a proper warm/cool feeling on their entire body, but they feel colder on the foot and lower body in the combined-cooling condition.

关键词： convection cooling temperature ondol thermal comfort fan coil unit combined cooling system

Clustering Reference Images Based on Covisibility for Visual Localization

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2023年第5期75卷 2705-2725页

作者： Sangyun lee Junekoo kang Hyunki Hong School of Integrative Engineering Chung-Ang UniversityHeukseok-ro 84Dongjak-kuSeoul06973Korea School of Software Chung-Ang UniversityHeukseok-ro 84Dongjak-kuSeoul06973Korea

In feature-based visual localization for small-scale scenes,local descriptors are used to estimate the camera pose of a query *** large and ambiguous environments,learning-based hierarchical networks that employ local as well as global descriptors to reduce the search space of database images into a smaller set of reference views have been ***,since global descriptors are generated using visual features,reference images with some of these features may be erroneously *** order to address this limitation,this paper proposes two clustering methods based on how often features appear as well as their *** both approaches,the scene is represented by voxels whose size and number are computed according to the size of the scene and the number of available *** the first approach,a voxel-based histogram representing highly reoccurring scene regions is generated from reference images.A meanshift is then employed to group the most highly reoccurring voxels into place clusters based on their spatial *** the second approach,a graph representing the covisibility-based relationship of voxels is *** matching is performed within the reference image clusters,and a perspective-n-point is employed to estimate the camera *** experimental results showed that camera pose estimation using the proposed approaches was more accurate than that of previous methods.

关键词： Visual localization deep learning voxel representation clustering covisibility meanshift graph structure

Prediction of Melt Pool Dimension and Residual Stress Evolution with Thermodynamically-Consistent Phase Field and Consolidation Models during Re-Melting Process of SLM

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2021年第1期66卷 87-112页

作者： kang-Hyun lee Gun Jin Yun Department of Aerospace Engineering Seoul National UniversitySeoul08826South Korea Institute of Advanced Aerospace Technology Seoul National UniversitySeoul08826South Korea

Re-melting process has been utilized to mitigate the residual stress level in the selective laser melting(SLM)process in recent ***,the complex consolidation mechanism of powder and the different material behavior after the first laser melting hinder the direct implementation of the re-melting *** this work,the effects of re-melting on the temperature and residual stress evolution in the SLM process are investigated using a thermo-mechanically coupled finite element *** degree of consolidation is incorporated in the energy balance equation based on the thermodynamically-consistent phase-field *** drastic change of material properties due to the variation of temperature and material state is also *** the proposed simulation framework,the single-track scanning is simulated first to predict the melt pool dimension and validate the proposed model with the existing experimental *** obtained thermal histories reveal that the highest cooling rate is observed at the end of the local solidification time which acts as an important indicator for the alleviation of temperature ***,the scanning of a whole single layer that consists of multiple tracks is simulated to observe the stress evolution with several re-melting *** the full melting of powder material in the first scanning process,the increase of residual stress level is observed with one remelting ***,the predicted stress level with the re-melting process shows the variation trend attributable to the accumulated heat in the *** numerical issues and the detailed implementation process are also introduced in this paper.

关键词： Selective laser melting thermo-mechanical analysis Ti-6Al-4V additive manufacturing re-melting residual stress

A metallic anti-biofouling surface with a hierarchical topography containing nanostructures on curved micro-riblets

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2022年第1期8卷 83-96页

作者： Taekyung Kim Sunmok Kwon Jeehyeon lee Joon Sang lee Shinill kang National Center for Optically-assisted high precision Mechanical Systems Yonsei UniversitySeoul 03722Korea School of Mechanical Engineering Yonsei University50 Yonsei-roSeodaemun-guSeoul 03722Korea

Metallic surface finishes have been used in the anti-biofouling,but it is very difficult to produce surfaces with hierarchically ordered *** the present study,anti-biofouling metallic surfaces with nanostructures superimposed on curved micro-riblets were produced via top-down *** to the attachment theory,these surfaces feature few attachment points for organisms,the nanostructures prevent the attachment of bacteria and algal zoospores,while the micro-riblets prohibit the settlement of *** oxidation was performed to induce *** forms a hydration layer on the surface,which physically blocks foulant adsorption along with the anti-biofouling *** characterized the surfaces via scanning electron and atomic force microscopy,contact-angle measurement,and wear-resistance *** contact angle of the hierarchical structures was less than 1°.Laboratory settlement assays verified that bacterial attachment was dramatically reduced by the nanostructures and/or the hydration layer,attributable to *** micro-riblets prohibited the settlement of *** 77 days of static immersion in the sea during summer,the metallic surface showed significantly less biofouling compared to a surface painted with an anticorrosive coating.

关键词： Anti-biofouling Superhydrophilic Hierarchical topography Metallic engineered surface Nanoimprinting,static immersion test,field trials

Synthesis and Characterization of SiO_2 Coated γ-Fe_2O_3 Nanocomposite Powder for Hyperthermic Application

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2010年第4期26卷 333-336页

作者： Ji-hun Yu Jai-Sung lee Yong-Ho Choa Heinrich Hofmann Korea Institute of Materials Science Changwon 641-831 Korea Division of Materials and Chemical Engineering Hanyang University Ansan 426-791 Korea Swiss Federal Institute of Technology at Lausanne Lausanne CH-1015 Switzerland

SiO2 coated γ-Fe2O3 nanocomposite powder has been successfully synthesized by chemical vapor condensation process and its feasibility on hyperthermic application was investigated in this study. The power loss of SiO2 coated γ-Fe2O3 nanocomposite powder which means the magnetic heating effect under alternative magnetic field was much higher than the single phase γ-Fe2O3 nano powder due to the very fine size under 20 nm and well dispersion in biologically compatible SiO2 matrix. The superparamagnetism and hyperthermic property of SiO2 coated γ-Fe2O3 nanocomposite powder were discussed in terms of microstructural development in this study.

关键词： Hyperthermia Nano-Bio Chemical vapor condensation Silica coated iron oxide nanoparticle Superparamagnetism