检索结果-南通市图书馆

Effect of tungsten carbide particles on microstructure and mechanical properties of Cu alloy composite bit matrix

Journal of Iron and Steel Research International 2024年第2期31卷 519-530页

作者： Ding-qian Dong Feng-yuan He Xin-hui Chen Hui Li kai-hua shi Hui-wen Xiong Xin Xiang Li Zhang College of Mechanical Engineering Sichuan University of Science and EngineeringZigong643000SichuanChina State Key Laboratory of Powder Metallurgy Central South UniversityChangsha410083HunanChina Zigong Cemented Carbide Co. Ltd.Zigong643011SichuanChina Material Corrosion and Protection Key Laboratory of Sichuan Province Sichuan University of Science and EngineeringZigong643000SichuanChina

Copper alloy composite bit matrix was prepared by pressureless vacuum infiltration,using at least one of the three kinds of tungsten carbide particles,for example,irregular cast tungsten carbide,monocrystalline tungsten carbide and sintered reduced tungsten carbide *** effects of powder particle morphology,particle size and mass fraction of tungsten carbide on the microstructure and mechanical properties of copper alloy composite were investigated by means of scanning electron microscopy,X-ray diffraction and abrasive wear test in *** results show that tungsten carbide morphology and particle size have obvious effects on the mechanical properties of copper alloy *** tungsten carbide partially dissolved in the copper alloy binding phase,and layers of Cu_(0.3)W_(0.5)Ni_(0.1)Mn_(0.1)C phase with a thickness of around 8–15μm were formed on the edge of the cast tungsten *** 45%irregular crushed fine cast tungsten carbide and 15%monocrystalline cast tungsten carbide were used as the skeleton,satisfactory comprehensive performance of the reinforced copper alloy composite bit matrix was obtained,with the bending strength,impact toughness and hardness reaching 1048 MPa,4.95 J/cm^(2) and 43.6 HRC,*** main wear mechanism was that the tungsten carbide particles firstly protruded from the friction surface after the copper alloy matrix was worn,and then peeled off from the matrix when further wear occurred.

关键词： Polycrystalline diamond compact Pressureless vacuum infiltration Copper alloy composite bit matrix Microstructure characterization Abrasive wear behavior

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure and properties of ultrafine WC-Co-VC cemented carbides with different Co contents

引用

Rare Metals 2022年第6期41卷 1955-1960页

作者： kai-huashi Ke-Chao Zhou Zhi-You Li Xiu-Qi Zan kai-Lin Dong Qing Jiang State Key Laboratory of Powder Metallurgy Central South UniversityChangsha 410083China Precision Parts Department Zigong Cemented Carbide Corporation LimitedZigong 643011China

Ultrafine WC-Co-VC cemented carbides are used extensively in a variety of industrial environments due to their excellent mechanical properties and outstanding wear *** content affects the service performance of the cemented *** the present study,the influ-ences of Co content on microstructure,physical,and mechanical properties were investigated *** WC-Co-VC cemented carbides with Co content varying from 4 wt%and 7 wt%and assistance of VC(0.35 wt%)as inhibitor of WC grain growth were *** physical and mechanical properties were tested and the microstructure characteristics were observed by optical microscope(OM)and scanning electron microscopy(SEM).From the results,it is found that with Co content increasing,both the cobalt magnetism and bending strength increase,while the coercive force,Rockwell hardness,density,and abrasive wear resistance *** addition,the OM and SEM results show that the increase of Co content in WC-Co-VC cemented carbides tends to reduce the quantity and size of micro-pores,and make the fracture mode change from brittle fracture to ductile fracture.

关键词： Ultrafine Cemented carbide Co content Microstructure Properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure and formation process of Ni-pool defect in WC-8Ni cemented carbides

引用

Transactions of Nonferrous Metals Society of China 2015年第3期25卷 873-878页

作者：时凯华周科朝李志友张斗昝秀颀中南大学粉末冶金国家重点实验室长沙410083 自贡硬质合金有限公司自贡643011

The morphologies and formation process of Ni-pool defects in WC?8Ni cemented carbides were studied. The SEM images show that Ni-pool generally has two kinds of morphologies: “island” in isolation and “ring” around a new phase. In the obtained samples with “ring-like Ni-pool”, WC, Ni and Ni2W4C (η phase) phases were detected in XRD patterns. Combined with SEM, EDX and XRD results, it is found that the phase in the center of the “ring-like Ni-pool” is Ni2W4C (η phase) and the main chemical components of Ni-pool are Ni, W and C. In addition, the relationships among large size Ni (agglomerated) particles, volatile impurities, pores and carbon content vs forming process of the Ni-pool defects for WC?8Ni cemented carbides are also presented and discussed.

关键词： cemented carbide WC-Ni alloy microstructure formation defect

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Low‑Temperature Oxidation Induced Phase Evolution with Gradient Magnetic Heterointerfaces for Superior Electromagnetic Wave Absorption

引用

Nano-Micro Letters 2025年第1期17卷 191-204页

作者： Zizhuang He Lingzi shi Ran Sun Lianfei Ding Mukun He Jiaming Li hua Guo Tiande Gao Panbo Liu School of Chemistry and Chemical Engineering Northwestern Polytechnical UniversityXi’an 710129People’s Republic of China School of Marine Science and Technology Northwestern Polytechnical UniversityXi’an 710072People’s Republic of China

Gradient magnetic heterointerfaces have injected infinite vitality in optimizing impedance matching,adjusting dielectric/magnetic resonance and promoting electromagnetic(EM)wave absorption,but still exist a significant challenging in regulating local phase ***,accordion-shaped Co/Co_(3)O_(4)@N-doped carbon nanosheets(Co/Co_(3)O_(4)@NC)with gradient magnetic heterointerfaces have been fabricated via the cooperative high-temperature carbonization and lowtemperature oxidation *** results indicate that the surface epitaxial growth of crystal Co_(3)O_(4) domains on local Co nanoparticles realizes the adjustment of magnetic-heteroatomic components,which are beneficial for optimizing impedance matching and interfacial ***,gradient magnetic heterointerfaces simultaneously realize magnetic coupling,and long-range magnetic ***,the synthesized Co/Co_(3)O_(4)@NC absorbents display the strong electromagnetic wave attenuation capability of−53.5 dB at a thickness of 3.0 mm with an effective absorption bandwidth of 5.36 GHz,both are superior to those of single magnetic domains embedded in carbon *** design concept provides us an inspiration in optimizing interfacial polarization,regulating magnetic coupling and promoting electromagnetic wave absorption.

关键词： Magnetic heterointerfaces Phase evolution Interfacial polarization Magnetic coupling Electromagnetic wave absorption

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multiple Tin Compounds Modified Carbon Fibers to Construct Heterogeneous Interfaces for Corrosion Prevention and Electromagnetic Wave Absorption

引用

Nano-Micro Letters 2025年第1期17卷 507-527页

作者： Zhiqiang Guo Di Lan Zirui Jia Zhenguo Gao Xuetao shi Mukun He hua Guo Guanglei Wu Pengfei Yin College of Science Sichuan Agricultural UniversityYa’an 625014People’s Republic of China School of Materials Science and Engineering Hubei University of Automotive TechnologyShiyan 442002People’s Republic of China Institute of Materials for Energy and Environment State Key Laboratory of Bio‑Fibers and Eco‑TextilesCollege of Materials Science and EngineeringQingdao UniversityQingdao 266071People’s Republic of China Shaanxi Key Laboratory of Macromolecular Science and Technology School of Chemistry and Chemical EngineeringNorthwestern Polytechnical UniversityXi’anShaanxi 710072People’s Republic of China

Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly ***-component interface engineering is considered an effective means to achieve high-efficiency EMW ***,interface modulation engineering has not been fully discussed and has great potential in the field of EMW *** this study,multi-component tin compound fiber composites based on carbon fiber(CF)substrate were prepared by electrospinning,hydrothermal synthesis,and high-temperature thermal *** utilizing the different properties of different substances,rich heterogeneous interfaces are *** effectively promotes charge transfer and enhances interfacial polarization and conduction *** prepared SnS/SnS_(2)/SnO_(2)/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt%in epoxy *** minimum reflection loss(RL)is−46.74 dB and the maximum effective absorption bandwidth is 5.28 ***,SnS/SnS_(2)/SnO_(2)/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel ***,this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.

关键词： Electrostatic spinning Component regulation Heterogeneous interfaces Electromagnetic wave absorption Corrosion protection

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

含孔洞CoCrNiFeCu高熵合金纳米压入的分子动力学模拟

引用

原子与分子物理学报 2025年第3期42卷 141-148页

作者：史银花施琴江苏联合职业技术学院镇江分院镇江212016

高熵合金具有优异的力学性能、耐磨耐蚀耐高温等性能,成为未来最有发展潜力的新型材料之一.因此,本文通过分子动力学模拟的方法探究了孔洞对CoCrNiFeCu高熵合金模型纳米压痕力学性能和位错演化的影响.结果表明,屈服点、载荷、杨氏模量... 详细信息

高熵合金具有优异的力学性能、耐磨耐蚀耐高温等性能,成为未来最有发展潜力的新型材料之一.因此,本文通过分子动力学模拟的方法探究了孔洞对CoCrNiFeCu高熵合金模型纳米压痕力学性能和位错演化的影响.结果表明,屈服点、载荷、杨氏模量和硬度等力学参数随着孔洞深度D的增加呈现先增加后稳定的趋势.孔洞的存在显著影响了位错形核的位置,随着孔洞深度的增加,初始位错优先在孔洞与表面之间形成,随后集中在模型表面形成,且位错环由平面圆环状转变为“翼状”.在孔洞深度较小时(D<40A),位错环沿(110)面水平扩展,随着孔洞深度的增加,位错环开始向下扩展.此外,在压痕深度为30?时,位错密度随着孔洞深度的增加逐渐增加.

关键词： CoCrNiFeCu 分子动力学纳米压入力学性能位错演变

来源：

维普期刊数据库博看期刊

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A novel flexible nerve guidance conduit promotes nerve regeneration while providing excellent mechanical properties

引用

Neural Regeneration Research 2025年第7期20卷 2084-2094页

作者： Tong Li Quhan Cheng Jingai Zhang Boxin Liu Yu shi Haoxue Wang Lijie huang Su Zhang Ruixin Zhang Song Wang Guangxu Lu Peifu Tang Zhongyang Liu kai Wang Department of Orthopedics the Fourth Medical Center of Chinese PLA General HospitalBeijingChina Department of Training and Sports Medicine Characteristic Medical Center of Chinese People’s Armed Police ForceTianjinChina Medical School of Chinese PLA BeijingChina Key Laboratory of Bioactive Materials for the Ministry of Education College of Life SciencesNankai UniversityTianjinChina Department of Orthopedics Tianjin HospitalTianjinChina Department of Rehabilitation Medicine Er Quan Hospital of PAPWuxiJiangsu ProvinceChina

Autografting is the gold standard for surgical repair of nerve defects>5 mm in length;however,autografting is associated with potential complications at the nerve donor *** an alternative,nerve guidance conduits may be *** ideal conduit should be flexible,resistant to kinks and lumen collapse,and provide physical cues to guide nerve *** designed a novel flexible conduit using electrospinning technology to create fibers on the innermost surface of the nerve guidance conduit and employed melt spinning to align ***,we prepared disordered electrospun fibers outside the aligned fibers and helical melt-spun fibers on the outer wall of the electrospun fiber *** presence of aligned fibers on the inner surface can promote the extension of nerve cells along the *** helical melt-spun fibers on the outer surface can enhance resistance to kinking and compression and provide *** novel conduit promoted nerve regeneration and functional recovery in a rat sciatic nerve defect model,suggesting that it has potential for clinical use in human nerve injuries.

关键词： aligned fibers anti-kinking helical fibers nerve guidance conduit nerve regeneration peripheral nerve injury topological guidance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Advanced Functional Electromagnetic shielding Materials:A Review Based on Micro‑Nano Structure Interface Control of Biomass Cell Walls

引用

Nano-Micro Letters 2025年第1期17卷 98-134页

作者： Yang shi Mingjun Wu Shengbo Ge Jianzhang Li Anoud Saud Alshammari Jing Luo Mohammed A.Amin hua Qiu Jinxuan Jiang Yazeed M.Asiri Runzhou huang hua Hou Zeinhom M.El‑Bahy Zhanhu Guo Chong Jia kaimeng Xu Xiangmeng Chen Co‑Innovation Center of Efficient Processing and Utilization of Forest Resources College of Materials Science and EngineeringNanjing Forestry UniversityNanjing 210037People’s Republic of China State Key Laboratory of Efficient Production of Forest Resourced Beijing Forestry UniversityQinghua East Road 35Haidian DistrictBeijing 100083People’s Republic of China Department of Physics Faculty of Sciences‑ArarNorthern Border UniversityArar 91431Saudi Arabia Department of Chemistry College of ScienceTaif UniversityP.O.Box 1109921944 TaifSaudi Arabia Shaanxi Key Laboratory of Macromolecular Science and Technology School of Chemistry and Chemical EngineeringNorthwestern Polytechnical UniversityXi’anShaanxi 710072People’s Republic of China Integrated Composites Lab Department of Mechanical and Construction EngineeringNorthumbria UniversityNewcastle Upon Tyne NE18STUK College of Materials Science and Engineering Taiyuan University of Science and TechnologyTaiyuan 030024People’s Republic of China Department of Chemistry Faculty of ScienceAl-Azhar UniversityNasr CityCairo 11884Egypt Yunnan Provincial Key Laboratory of Wood Adhesives and Glued Products International Joint Research Center for Biomass MaterialsSouthwest Forestry UniversityKunming 650224People’s Republic of China School of Science Henan Agricultural UniversityZhengzhou 450002People’s Republic of China

Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass *** materials offer numerous advantages such as being lightweight,porous,and *** to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding *** concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding *** particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be *** preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and *** composite methods and fillers of various biomass materials were *** paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.

关键词： Biomass materials Electromagnetic interference shielding Micro-nano structure interface control Conductivity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

NewBalance: Efficient Data Space Management and Algorithmic Optimization for Large-Scale Storage Systems

引用

Chinese Journal of Electronics 2017年第3期26卷 493-501页

作者： XU Guangping LIN Sheng shi kai ZHANG hua Tianjin Key Laboratory of Intelligence Computing and New Software Technology Computer and Communication Engineering School Tianjin University of Technology

Fragmentation usually occurs when data space of original storage nodes has to be reallocated to new added storage nodes during the scale-out evolution of the large-scale storage *** greatly influences its performance and becomes a challenge to manage the whole *** present an efficient space management framework,called New Balance,to reduce fragmentation with the minimum data movement while keeping the storage system load *** space management framework has two phases including the collection phase and the allocation *** the collection phase,we propose a novel algorithm,called the greedy bi-direction collector,which collects enough space for the new storage *** the allocation phase,we formally represent it as a variant of the bin packing problem and then utilize some bin packing heuristics including the first fitting and the best fitting to allocate collected intervals to new added storage *** experimental results show that the amount of intervals can be reduced by 20%;5%and our algorithmic optimization improves the data lookup performance by at least 10%and the scale-out performance by 2X;X.

关键词： Large-scale storage systems Space management Algorithmic optimization Performance evaluation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Experimental Research on Boundary Shear Stress in Typical Meandering Channel

引用

China Ocean Engineering 2018年第3期32卷 365-373页

作者： CHEN kai-hua XIA Yun-feng ZHANG shi-zhao WEN Yun-cheng XU hua Nanjing Hydraulic Research Institute Nanjing 210029China College of Harbor Coastal and Offshore EngineeringHohai UniversityNanjing 210098China The State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering Nanjing 210098China Key Laboratory of Port Waterway and Sedimentation Engineering of Ministry of TransportNanjing 210024China

A novel instrument named Micro-Electro-Mechanical System(MEMS) flexible hot-film shear stress sensor was used to study the boundary shear stress distribution in the generalized natural meandering open channel, and the mean sidewall shear stress distribution along the meandering channel, and the lateral boundary shear stress distribution in the typical cross-section of the meandering channel was analysed. Based on the measurement of the boundary shear stress, a semi-empirical semi-theoretical computing approach of the boundary shear stress was derived including the effects of the secondary flow, sidewall roughness factor, eddy viscosity and the additional Reynolds stress, and more importantly, for the first time, it combined the effects of the cross-section central angle and the Reynolds number into the expressions. Afterwards, a comparison between the previous research and this study was developed. Following the result, we found that the semi-empirical semi-theoretical boundary shear stress distribution algorithm can predict the boundary shear stress distribution precisely. Finally, a single factor analysis was conducted on the relationship between the average sidewall shear stress on the convex and concave bank and the flow rate, water depth, slope ratio,or the cross-section central angle of the open channel bend. The functional relationship with each of the above factors was established, and then the distance from the location of the extreme sidewall shear stress to the bottom of the open channel was deduced based on the statistical theory.

关键词： boundary shear stress flume physical model river bend MEMS flexible hot-film shear stress sensor

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：