检索结果-南通市图书馆

Chinese Journal of Mechanical Engineering 2024年第3期37卷 151-169页

作者： Jianwei Wang Haoxi Zhang Shaocun Han Hang Li Peng Wang kai feng State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Hunan UniversityChangsha 410082China

Low damping characteristics have always been a key sticking points in the development of gas *** application of squeeze film dampers can significantly improve the damping performance of gas lubricated *** paper proposed a novel hermetic diaphragm squeeze film damper(HDSFD)for oil-free turbomachinery supported by gas lubricated *** types of HDSFDs with symmetrical structure were proposed for good damping *** considering the compressibility of the damper fluid,based on hydraulic fluid mechanics theory,a dynamic model of HDSFDs under medium is proposed,which successfully reflects the frequency dependence of force *** on the dynamic model,the effects of damper fluid viscosity,bulk modulus of damper fluid,thickness of damper fluid film and plunger thickness on the dynamic stiffness and damping of HDSFDs were *** experimental test rig was assembled and series of experimental studies on HDSFDs were *** damper fluid transverse flow is added to the existing HDSFD concept,which aims to make the dynamic force coefficients independent of *** the force coefficient is still frequency dependent,the damping coefficient at high frequency excitation with damper fluid supply twice as that without damper fluid *** results serve as a benchmark for the calibration of analytical tools under development.

关键词： Hermetic diaphragm squeeze film damper Compressibility Dynamic model Experimental studies

Carbon steel anticorrosion performance and mechanism of sodium lignosulfonate

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第1期43卷 356-365页

作者： Bo-kai Liao Rui-Xuan Quan Ping-Xian feng Huan Wang Wei Wang Li Niu School of Chemistry and Chemical Engineering Guangzhou Key Laboratory of Sensing Materials and DevicesJoint Institute of Guangzhou University and Institute of Corrosion Science and TechnologyGuangzhou UniversityGuangzhou 510006China

Lignin is a typical biological macromolecule with a three-dimensional network structure and abundant functional groups. It has excellent ionic complexation ability and amphiphilic molecular structure *** this study, the carbon steel anticorrosion performance of sodium lignosulfonate(SLS) in an acid solution was evaluated using the weight loss method, electrochemical measurements, scanning vibration electrode technique(SVET), and surface characterization methods. SLS exhibited excellent corrosion inhibition efficiency for Q235carbon steel in 1 mol·L^(-1) HCl, reaching a maximum value of 98%. A low SLS concentration of 20 mg·L^(-1) resulted in the maximum corrosion inhibition efficiency, which remained nearly constant at higher SLS *** SVET test demonstrated that the formation of an SLS adsorption film can impede corrosion. This study confirms the significance of the application of green biomass resources in the field of metal corrosion protection and green functional materials.

关键词： Lignin Sodium lignosulfonate Corrosion inhibitor Carbon Steel

Effect of Mn content on microstructure and properties of AlCrCuFeMnx high-entropy alloy

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第2期21卷 147-158页

作者： Ning Wang kai Ma Qiu-da Li Yu-dong Yuan Yan-chun Zhao Li feng School of Materials Science and Engineering Lanzhou University of TechnologyLanzhou 730050China State Key Laboratory of Advanced Processing and Reuse of Nonferrous Metals Lanzhou 730050China CNNC Nuclear Power Operation and Management Co. Ltd.Haiyan 314300ZhejiangChina

AlCrCuFeMnx(x=0,0.5,1,1.5,and 2)high-entropy alloys were prepared using the vacuum arc melting *** microstructure and mechanical properties of AlCrCuFeMnxwere analyzed and tested by XRD,SEM,TEM,nanoindentation,and electronic universal *** results indicate that the AlCrCuFeMnxhigh-entropy alloy exhibits a dendritic structure,consisting of dendrites with a BCC structure,interdendrite regions with an FCC structure,and precipitates with an ordered BCC structure that form within the ***(Mn)has a strong affinity for dendritic,interdendritic,and precipitate structures,allowing it to easily enter these *** an increase in Mn content,the size of the precipitated nanoparticles in the dendritic region initially increases and then ***,the area fraction initially decreases and then ***,the alloy’s strength and wear resistance decrease,while its plasticity *** Al Cr Cu Fe Mn1.5alloy boasts excellent mechanical properties,including a hardness of 360 HV and a wear rate of 2.4×10^(-5)mm^(3)·N^(-1)·mm^(-1).It also exhibits impressive yield strength,compressive strength,and deformation rates of 960 MPa,1,700 MPa,and 27.5%,respectively.

关键词： high-entropy alloys microstructure mechanical properties wear resistance strengthening mechanisms

Scalable production of mesoporous titanium nanoparticles through sequential flash nanocomplexation

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第4期35卷 303-309页

作者： feng Cui Fangman Chen Xiaochun Xie Chenyang Guo kai Xiao Ziping Wu Yinglu Chen Junna Lu Feixia Ruanb Chuanxu Cheng Chao yang Dan Shao School of Biomedical Sciences and Engineering South China University of TechnologyGuangzhou International CampusGuangzhou 511442China Institutes for Life Sciences School of MedicineSouth China University of TechnologyGuangzhou 510006China School of Biology and Biological Engineering South China University of TechnologyGuangzhou 510006China Department of Orthopedics Academy of Orthopedics-Guangdong ProvinceOrthopedic Hospital of Guangdong ProvinceGuangdong Provincial Key Laboratory of Bone and Joint Degenerative DiseasesThe Third Affiliated Hospital of Southern Medical UniversityGuangzhou 510665China National Engineering Research Center for Tissue Restoration and Reconstruction South China University of TechnologyGuangzhou 510006China

Mesoporous titanium nanoparticles(MTNs) have emerged as an important porous semiconductor owning to their large surface area and unique electronic/optical properties. However, the fundamental research for rational manufacturing MTNs in a highly scalable manner remains a challenge. In this study, we report a two-step flash nanocomplexation(FNC) approach to large-scalable generate MTNs through the sequential combination of two multi-inlet vortex mixers. By optimizing the concentrated titanium precursor,polyethylene glycol(PEG)-functionalized silane amount and p H, we have been able to produce MTNs with small particle size(31.5 nm), larger surface area(416.9 m^(2)/g) and pore volume(0.59 cm^(3)/g). Different from the traditional MTNs bulk, FNC-produced MTNs exhibited well-controlled manner and exceptional photocatalytic and antibacterial properties. Importantly, the optimized MTNs outperformed commercial P25 not only in protecting ultraviolet A(UVA)-exposed skin, but also in treating P. aeruginosa-infected wound. We believe that the high controllability and scalability of sequential flash nanocomplexation method offers great opportunities in enhancing the performance of mesoporous titanium nanoparticles.

关键词： Mesoporous titanium nanoparticles Flash nanocomplexation Photocatalytic Antibacterial Sequential

Difluoromethyl phenoxathiinium salt: A new general and versatile difluoromethylating reagent with divergent ·CF_(2)H, CF_(2)H^(+), and :CF_(2) reactivities

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第3期67卷 953-962页

作者： Yuan-Qing Gu Hong-Xin Long Dan-Dan Zhang Mei-feng Ruan Guo-kai Liu School of Pharmacy Shenzhen University Medical SchoolShenzhen UniversityShenzhen 518055China

Development of practical and versatile electrophilic difluoromethylating reagent is still a grand challenge so far due to its inherent instability or low ***,we report the design and synthesis of difluoromethyl phenoxathiinium tetrafluoroborate(PT-CF_(2)H^(+)BF_(4)^(-)) as a novel difluoromethylating reagent,which proves to be a bench-stable,general,powerful and versatile reagent with divergent·CF_(2)H,CF_(2)H^(+),and:CF_(2) *** use of this reagent,we demonstrated a vast array of difluoromethyl radical transfer reactions via diverse pathways involving photocatalyst-free visible-light induction,visible-light photoredox catalysis and visible-light mediation single electron transfer of EDA ***,the green and highly effective CF_(2)H^(+) and:CF_(2) transfer reactions were also readily accomplished.

关键词： difluoromethyl phenoxathiinium salt versatile difluoromethylating reagent difluoromethyl radical difluoromthyl cation difluorocarbene

A real-time intelligent lithology identification method based on a dynamic felling strategy weighted random forest algorithm

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 1135-1148页

作者： Tie Yan Rui Xu Shi-Hui Sun Zhao-kai Hou Jin-Yu feng School of Petroleum Engineering Northeast Petroleum UniversityDaqing163318HeilongjiangChina Sanya Offshore Oil&Gas Research Institute Northeast Petroleum UniversitySanya572025HainanChina

Real-time intelligent lithology identification while drilling is vital to realizing downhole closed-loop drilling. The complex and changeable geological environment in the drilling makes lithology identification face many challenges. This paper studies the problems of difficult feature information extraction,low precision of thin-layer identification and limited applicability of the model in intelligent lithologic identification. The author tries to improve the comprehensive performance of the lithology identification model from three aspects: data feature extraction, class balance, and model design. A new real-time intelligent lithology identification model of dynamic felling strategy weighted random forest algorithm(DFW-RF) is proposed. According to the feature selection results, gamma ray and 2 MHz phase resistivity are the logging while drilling(LWD) parameters that significantly influence lithology identification. The comprehensive performance of the DFW-RF lithology identification model has been verified in the application of 3 wells in different areas. By comparing the prediction results of five typical lithology identification algorithms, the DFW-RF model has a higher lithology identification accuracy rate and F1 score. This model improves the identification accuracy of thin-layer lithology and is effective and feasible in different geological environments. The DFW-RF model plays a truly efficient role in the realtime intelligent identification of lithologic information in closed-loop drilling and has greater applicability, which is worthy of being widely used in logging interpretation.

关键词： Intelligent drilling Closed-loop drilling Lithology identification Random forest algorithm Feature extraction

Fe-doped Co_(3)O_(4) nanowire strutted 3D pinewood-derived carbon: A highly selective electrocatalyst for ammonia production via nitrate reduction

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2276-2282页

作者： Xuwei Liu Chaozhen Liu Xun He Zhengwei Cai kai Dong Jun Li Xiaoya Fan Ting Xie Xiya yang Yonglan Luo Dongdong Zheng Shengjun Sun Sulaiman Alfaifi feng Gong Xuping Sun Institute of Fundamental and Frontier Sciences University of Electronic Science and Technology of ChinaChengdu 610054China Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education School of Energy and EnvironmentSoutheast UniversityNanjing 211189China College of Chemistry Chemical Engineering and Materials ScienceShandong Normal UniversityJinan 250014China Chemistry Department Frontier of ScienceKing Abdulaziz UniversityJeddah 21589Saudi Arabia

Nitrate(NO_(3)^(-)),a nitrogen-containing pollutant,is prevalent in aqueous solutions,contributing to a range of environmental and health-related *** electrocatalytic reduction of NO_(3)^(-)holds promise as a sustainable approach to both eliminating NO_(3)^(-)and generating valuable ammonia(NH_(3)).Nevertheless,the reduction reaction of NO_(3)^(-)(NO_(3)^(-)RR),involving 8-electron transfer process,is intricate,necessitating highly efficient electrocatalysts to facilitate the conversion of NO_(3)^(-)to NH_(3).In this study,Fe-doped Co_(3)O_(4) nanowire strutted three-dimensional(3D)pinewood-derived carbon(Fe-Co_(3)O_(4)/PC)is proposed as a high-efficiency NO_(3)^(-)RR electrocatalyst for NH_(3) *** within 0.1 M NaOH containing NO_(3)^(-),Fe-Co_(3)O_(4)/PC demonstrates exceptional performance,obtain an impressively large NH_(3) yield of 0.55 mmol·h^(-1)·cm^(-2) and an exceptionally high Faradaic efficiency of 96.5%at-0.5 V,superior to its Co_(3)O_(4)/PC counterpart(0.2 mmol·h^(-1)·cm^(-2),73.3%).Furthermore,the study delves into the reaction mechanism of Fe-Co_(3)O_(4) for NO_(3)^(-)RR through theoretical calculations.

关键词： Fe-doped Co_(3)O_(4) nanowire pinewood-derived carbon electrocatalytic NO_(3)-reduction NH_(3) synthesis density functional theory

Application of GNSS-PPP on Dynamic Deformation Monitoring of Offshore Platforms

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第2期38卷 352-361页

作者： YU Li-na XIONG Kuan GAO Xi-feng LI Zhi FAN Li-long ZHANG kai Institute of Ocean Energy and Intelligent Construction Tianjin University of TechnologyTianjin 300384China China Railway Construction Bridge Engineering Bureau Group Co.LTD Tianjin 300300China School of Civil Engineering Tianjin UniversityTianjin 300072China Department of Land Surveying and Geo-Informatics The Hong Kong Polytechnic UniversityHong KongChina State Key Laboratory of Precision Blasting Jianghan UniversityWuhan 430056China

The real-time dynamic deformation monitoring of offshore platforms under environmental excitation is crucial to their safe *** Global Navigation Satellite System-Precise Point Positioning(GNSS-PPP)has been considered for this purpose,its monitoring accuracy is relatively ***,the influence of background noise on the dynamic monitoring accuracy of GNSS-PPP remains ***,it is imperative to further validate the feasibility of GNSS-PPP for deformation monitoring of offshore *** address these concerns,vibration table tests with different amplitudes and frequencies are *** results demonstrate that GNSS-PPP can effectively monitor horizontal vibration displacement as low as±30 mm,which is consistent with ***,the spectral characteristic of background noise in GNSS-PPP is similar to that of GNSS-RTK(Real Time Kinematic).Building on this observation,an improved Complete Ensemble Empirical Mode Decomposition with Adaptive Noise(CEEMDAN)has been proposed to de-noise the data and enhance the dynamic monitoring accuracy of *** monitoring application research is also undertaken,successfully extracting and analyzing the dynamic deformation of an offshore platform structure under environmental excitation using GNSS-PPP monitoring in conjunction with improved CEEMDAN *** comparing the de-noised dynamic deformation trajectories of the offshore platform during different periods,it is observed that the platform exhibits reversible alternating vibration responses under environmental excitation,with more pronounced displacement deformation in the direction of load *** research results confirm the feasibility and potential of GNSS-PPP for dynamic deformation monitoring of offshore platforms.

关键词： GNSS-PPP offshore platform dynamic deformation monitoring improved CEEMDAN de-noising

Microstructure and Mechanical Behavior of Mg-Based Bimetal Plates with High Formability Sleeve by Co-extrusion

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 499-512页

作者： Yue-Hui Dang Sheng-Lin Liu Xiao-Lei Ai Xiao-Wei feng Bo feng Zhuo Tian Ying-Fei Lin Huan-Tao Chen kai-Hong Zheng School of Materials Science and Engineering Chang’an UniversityShaanxi 710064China Guangdong Key Laboratory of Metal Toughening Technology and Application Institute of New MaterialsGuangdong Academy of SciencesGuangzhou 510650China

In this study,microstructure and mechanical behavior of two types of Mg-based bimetal plates with a high formability sleeve were systematically studied,with a great emphasis on the effect of the interface characteristic and the sleeve fraction on the plasticity of composite *** rule of mixtures(ROM)for elongation was also *** results show that when there is no or thin diffusion layer with thickness of about 3μm,Mg-based bimetal plates have a good plasticity with elongation of about 19-24%,and the ROM predicted elongations are very close to the experimental *** contrast,with a diffusion layer about 95-155μm thick,Mg-based bimetal plates exhibit a poor plasticity with elongation of about 11-17%,and the experimental elongations largely deviate from the ROM *** plasticity of Mg-based bimetal plates increases with increasing sleeve *** study provides new insights on the plastic deformation of Mg-based bimetal composites with a high formability sleeve.

关键词： Mg-based composites Co-extrusion Microstructure Mechanical behavior Plastic deformation

Numerical Simulation of Oil-Water Two-Phase Flow in Low Permeability Tight Reservoirs Based on Weighted Least Squares Meshless Method

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2024年第7期20卷 1539-1552页

作者： Xin Liu kai Yan Bo Fang Xiaoyu Sun Daqiang feng Li Yin School of GeoSciences Yangtze UniversityWuhan430100China State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation(Southwest Petroleum University) Chengdu610000China Downhole Service Company Petro China Qinghai Oilfield CompanyHaixi817000China Research Institute of Drilling and Production Technology Petro China Qinghai Oilfield CompanyDunhuang736200China PetroChina Qinghai Oilfield Company The Third Oil Plant Dunhuang736200China

In response to the complex characteristics of actual low-permeability tight reservoirs,this study develops a meshless-based numerical simulation method for oil-water two-phase flow in these reservoirs,considering complex boundary *** radial basis function point interpolation,the method approximates shape functions for unknown functions within the nodal influence *** shape functions constructed by the aforementioned meshless interpolation method haveδ-function properties,which facilitate the handling of essential aspects like the controlled bottom-hole flow pressure in horizontal ***,the meshless method offers greater flexibility and freedom compared to grid cell discretization,making it simpler to discretize complex geometries.A variational principle for the flow control equation group is introduced using a weighted least squares meshless method,and the pressure distribution is solved *** results demonstrate that the computational outcomes of the meshless point cloud model,which has a relatively small degree of freedom,are in close agreement with those of the Discrete Fracture Model(DFM)employing refined grid partitioning,with pressure calculation accuracy exceeding 98.2%.Compared to high-resolution grid-based computational methods,the meshless method can achieve a better balance between computational efficiency and ***,the impact of fracture half-length on the productivity of horizontal wells is *** results indicate that increasing the fracture half-length is an effective strategy for enhancing production from the perspective of cumulative oil production.

关键词： Weighted least squares method meshless method numerical simulation of low permeability tight reservoirs oil-water two-phase flow fracture half-length