检索结果-南通市图书馆

Effect of Ti_(p) Content on the Work Hardening and Softening Behavior of Mg-Zn-Ca Alloy

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 551-560页

作者： Jin-kai Zhang Cui-Ju Wang Yi-Dan Fan Chao Xu kai-Bo nie Kun-Kun Deng Shanxi Key Laboratory of Advanced Magnesium-Based Materials College of Materials Science and EngineeringTaiyuan University of TechnologyTaiyuan 030024China School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001China

The Ti_(p)/ZX60 composites with different Ti_(p) contents were prepared by semi-solid stirring *** extrusion,the microstructure,work hardening and softening behavior of the Ti_(p)/ZX60 composites were analyzed compared with the ZX60(Mg-6Zn-0.2Ca)*** results showed that the addition of Ti_(p) could not only promote the nucleation of dynamic recrystallized(DRXed)grains,but also be propitious to the refinement of DRXed *** increasing Ti_(p) content,the size of DRXed grains decreased accompanied with increasing volume fraction of DRXed *** the Ti_(p) content increased to 15 vol.%,the average size and volume fraction of DRXed grains reached to~0.32μm and 93.2%,***,both the strength and elongation were improved by the addition of Ti_(p).With increasing content of Ti_(p),a substantial increase in the strength was achieved with little change in the ***,the elongation decreased sharply when the Ti_(p) content further increased to 15 vol.%.The addition of Ti_(p) led to an increase in the work hardening rate,which gradually increased with increasing Ti_(p) ***,the softening rate did not demonstrate the same tendency with increasing Ti_(p) *** the conventional ceramic particles,the Ti_(p) can be deformed in coordination with the matrix alloy,which imparted a higher softening rate to the matrix *** though the softening rate improved as the Ti_(p) content increased from 5 to 10 vol.%,it dropped deeply as the Ti_(p) content increased to 15 vol.%owing to the fracture of Ti_(p) during extrusion.

关键词： Titanium particle content Particle reinforced magnesium matrix composites Work hardening Softening behavior Mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Corrosion Resistance of AZ91 Mg Alloy Modified by High-Current Pulsed Electron Beam

引用

Acta Metallurgica Sinica(English Letters) 2019年第2期32卷 218-226页

作者： Peng-Peng Wu Kun-Kun Deng kai-Bo nie Zhong-Zhong Zhang Shanxi Key Laboratory of Advanced Magnesium-Based Materials College of Materials Science and EngineeringTaiyuan University of Technology

The high-current pulsed electron beam(HCPEB) treatment with current density 6 J/cm^2 was applied on AZ91 Mg alloy to improve its corrosion resistance. Results showed that the net-like Mg_(17)Al_(12) disappeared on the surface of AZ91 Mg alloy after irradiation by HCPEB, which was instead of supersaturated Al element on the surface. Nevertheless, the application of HCPEB also led to the formation of crater-like and groove-like structures as well as micro-cracks on the surface of AZ91 Mg alloy. After HCPEB treatment by 3, 5 and 10 pulses, the AZ91 Mg alloy exhibited better corrosion ***, the increasing amount of micro-cracks reduced the anti-corrosive properties of AZ91 Mg alloy as the pulse increased to 20 and 30.

关键词： High-current pulsed electron beam(HCPEB) Corrosion resistance Electrochemical impedance spectroscopy(EIS) AZ91 Mg alloy Microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent Research on the Deformation Behavior of Particle Reinforced Magnesium Matrix Composite: A Review

引用

Acta Metallurgica Sinica(English Letters) 2019年第4期32卷 413-425页

作者： Kun-Kun Deng Cui-Ju Wang kai-Bo nie Xiao-Jun Wang Shanxi Key Laboratory of Advanced Magnesium-Based Materials College of Materials Science and Engineering Taiyuan University of Technology School of Materials Science and Engineering Harbin Institute of Technology

Particle reinforced magnesium matrix composite(PMMC) possesses the merits of high specific strength, high specific modulus, better dimensional stability, good wear resistance and lower production cost, which is thought as a promising material in the field of aerospace, automobile, electronic communication, etc. To eliminate the casting defect, the PMMC is usually experienced hot deformation process. The present paper mainly focuses on the deformation behavior of PMMCs. First, the development of PMMCs based on particle size is introduced. Then, the hot deformation technology and deformation mechanism of PMMCs at elevated temperature are given and analyzed, respectively. After reviewing the dynamic recrystallization and texture of PMMCs, its future development is suggested based on the current research progress.

关键词： Magnesium matrix composite Particle Hot deformation Deformation mechanism Recrystallization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research progress toward the influence of mosquito salivary proteins on the transmission of mosquito-borne viruses

引用

Insect Science 2024年第3期31卷 663-673页

作者： Zhao-Yang Wang kai-Xiao nie Ji-Chen Niu Gong Cheng Tsinghua University-Peking University Joint Center for Life Sciences School of MedicineTsinghua UniversityBejingChina Institute of Infectious Diseases Shenzhen Bay LaboratoryShenzhenGuangdongChina Department of Pathogen Biology School of Basic MedicineShandong First Medical University&Shandong Academy of Medical SciencesJinanChina

Mosquito-borne viruses(MBVs)are a large class of viruses transmitted mainly through mosquito bites,including dengue virus,Zika virus,Japanese encephalitis virus,West Nile virus,and chikungunya virus,which pose a major threat to the health of people around the *** global warming and extended human activities,the incidence of many MBVs has increased *** saliva contains a variety of bioactive protein *** not only enable blood feeding but also play a crucial role in regulating local infection at the bite site and the remote dissemination of MBVs as well as in remodeling the innate and adaptive immune responses of host ***,we review the physiological functions of mosquito salivary proteins(MSPs)in detail,the influence and the underlying mechanism of MSPs on the transmission of MBVs,and the current progress and issues that urgently need to be addressed in the research and development of MSP-based MBV transmission blocking vaccines.

关键词： immune response mosquito-borne virus mosquito salivary protein saliva vaccine transmission

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure, Tensile Properties and Work Hardening Behavior of an Extruded Mg–Zn–Ca–Mn Magnesium Alloy

引用

Acta Metallurgica Sinica(English Letters) 2020年第7期33卷 922-936页

作者： kai-Bo nie Zhi-Hao Zhu Paul Munroe Kun-Kun Deng Jun-Gang Han College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024China School of Materials Science and Engineering UNSW AustraliaKensingtonNSW 2052Australia

A new Mg-2.2 wt% Zn alloy containing 1.8 wt% Ca and 0.5 wt% Mn has been developed and subjected to extrusion under different extrusion *** finest(~0.48 μm) recrystallized grain structures,containing both nano-sized MgZn2 precipitates and α-Mn nanoparticles,were obtained in the alloy extruded at 270℃/0.01 mm *** this alloy,the deformed coarse-grain region possessed a much stronger texture intensity(~32.49 mud) relative to the recrystallized fine-grain region(~13.99 mud).A positive work hardening rate in the third stage of work hardening curve was also evident in the alloy extruded at 270℃,which was related to the sharp basal texture and which provided insufficient active slip *** high work hardening rate in the fourth stage contributed to the high ductility extruded at 270℃/1 mm *** alloy exhibited a weak texture,and the examination of fracture surface revealed highly dimpled *** optimum tensile strength was achieved in the alloy extruded at 270℃/0.01 mm s-1,and the yield strength,ultimate tensile strength and elongation to failure were^364.1 MPa,~394.5 MPa and^7.2%,*** grain strengthening from the recrystallized fine-grain region played the greatest role in the strength increment of this alloy compared with Orowan strengthening and dislocation strengthening in the deformed coarse-grain regions.

关键词： alloy grain strengthening

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Gastrointestinal insights during the COVID-19 epidemic

引用

World Journal of Clinical Cases 2020年第18期8卷 3934-3941页

作者： kai nie Yuan-Yuan Yang Min-Zi Deng Xiao-Yan Wang Department of Gastroenterology The Third Xiangya Hospital of Central South UniversityChangsha 410000Hunan ProvinceChina

Coronavirus disease-2019(COVID-19)has so far caused hundreds of mortalities *** respiratory symptoms are the main complication in COVID-19 patients,the disease is also associated with gastrointestinal problems,with diarrhea,nausea,and vomiting being primary COVID-19 ***,cancer and inflammatory bowel disease(IBD)management,stool viral tests,and virus exposure are major concerns in the context of COVID-19 *** patients with colorectal cancer and IBD,the colonic mucosa exhibits elevated angiotensin-converting enzyme 2 receptor levels,enhancing COVID-19 *** some cases,positive viral stool tests may be the only indicator of infection at admission or after leaving *** supplemental stool tests,the risk of undetected COVID-19 transmission is ***,viral exposure during the regular or emergency endoscopic examination should be *** carefully discuss key gastrointestinal concerns with regard to COVID-19 and call for more attention to such problems.

关键词： COVID-19 SARS-CoV-2 Diarrhea Colorectal cancer Inflammatory bowel disease Stool tests

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure and Mechanical Properties of Al_(2)O_(3p)/AZ91 Magnesium Matrix Laminated Material Adjusted by Freezing Temperature

引用

Acta Metallurgica Sinica(English Letters) 2024年第11期37卷 1819-1829页

作者： Ze-Xin Bai Kun-Kun Deng Ze-Qi Du kai-Bo nie Chao Xu Quan-Xin Shi Shanxi Key Laboratory of Advanced Magnesium-based Materials College of Materials Science and EngineeringTaiyuan University of TechnologyTaiyuan 030024China School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001China

The Al_(2)O_(3)laminated preforms with different layers thickness were prepared by freezing casting in present ***,the Al_(2)O_(3p)/AZ91 magnesium matrix laminated materials were obtained by infiltrating the AZ91 alloy melt into the Al_(2)O_(3)laminated preform based on pressure infiltration ***,the influence of freezing temperature on the microstructure,mechanical properties and fracture behavior of magnesium-based laminates was *** results indicated that with the decrease of freezing temperature,the thickness of Al_(2)O_(3)layers decreases gradually,the number of layers increases obviously,and the interlayers spacing *** with the decrease of interlayers spacing,the size of Mg17Al12 phase precipitated in the AZ91 alloy layers was refined,and the compression strength and strain were both improved *** micro-cracks initiated in Al_(2)O_(3)layers during loading process,while the AZ91 layers could effectively suppress the initiation and propagation of ***,the changing layers structure influenced by the decrease of freezing temperature had significant inhibiting effect on the initiation and propagation of micro-cracks,which endowed the Al_(2)O_(3p)/AZ91 magnesium matrix laminated materials with better strength and ***,the best compression properties of Al_(2)O_(3p)/AZ91 magnesium matrix laminated materials could be obtained at the freezing temperature of−50℃,the compression strength and elastic modulus of which were the 160%and 250%of monolithic AZ91 alloy,respectively.

关键词： Bio-inspired composites Freeze-casting Mechanical properties Metal matrix composites

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of Precipitated Phases on Corrosion of Mg95.8Gd3Zn1Zr0.2 Alloy with Long-Period Stacking Ordered Structure

引用

Acta Metallurgica Sinica(English Letters) 2016年第1期29卷 32-38页

作者： Xi-Mei zong Dan Wang Wei Liu kai-Bo nie Chun-Xiang Xu Jin-Shan Zhang College of Materials Science and Engineering Taiyuan University of Technology Taiyuan 030024 China Shanxi Key Laboratory of Advanced Magnesium-Based Materials Taiyuan 030024 China Department of Chemistry Taiyuan Normal UniversityTaiyuan 030031 China

The microstructure of the precipitated phases of ***3Zn1Zro.2 alloys with long-period stacking ordered structure before and after heat treatment is discussed. The corrosion properties of the as-cast （F）, solid-solution （T4） and aging-treated （T6） alloys in 1% NaC1 solution are studied. The hydrogen evolution and electrochemical measurements display that the as-cast ***3Zn1Zro.2 alloy with the continuous network eutectic phase exhibits the greatest corrosion resistance, while T6 sample with some needle-like phases and the particle phases is the worst among the three alloys. It is proposed to be mainly related to the amount, composition, microstructure and distribution of the precipitated phases.

关键词： Mg-Gd-Zn Corrosion properties Long-period stacking ordered (LPSO) Microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Risk factors of intra-abdominal bacterial infection after liver transplantation in patients with hepatocellular carcinoma

引用

Chinese Journal of Cancer Research 2014年第3期26卷 309-314页

作者： kai nie Rongzheng Ran Weifeng Tan Bin Yi Xiangji Luo Yong Yu Xiaoqing Jiang The 175th hospital of PLA Eastern Hepatobiliary Surgery Hospital Second Military Medical University

Objective： To explore the risk factors of intra-abdominal bacterial infection （IAI） after liver transplantation （LT） in patients with hepatocellular carcinoma （HCC）. Methods： A series of 82 HCC patients who received LT surgeries in our department between March 2004 and April 2010 was recruited in this study. Then we collected and analyzed the clinical data retrospectively. Statistical analysis system （SPSS） software was adopted to perform statistical analysis. Chi-square test, t-test and Wilcoxon rank sum test were used to analyze the clinical data and compute the significance of the incidences of early-stage IAI after LT for HCC patients. Binary logistic regression was performed to screen out the risk factors, and multiple logistic regression analyses were performed to compute the independent risk factors. Results： A series of 13 patients （13/82, 15.9%） had postoperative IAI. The independent risk factors of postoperative intra-abdominal bacterial infections after LT for HCC patients were preoperative anemia [Hemoglobin （HGB）〈90 g/L] and postoperative abdominal hemorrhage （72 hours 〉400 mL）, with the odds ratios at 8.121 （95% CI, 1.417 to 46.550, P=0.019） and 5.911 （95% CI, 1.112 to 31.432, P=0.037）. Conclusions： Postoperative IAI after LT in patients with HCC was a common complication. Preoperative moderate to severe anemia, as well as postoperative intra-abdominal hemorrhage more than 400 mL within the first 72 hours might independently indicate high risk of IAI for these patients.

关键词： Liver transplantation (LT) intra-abdominal bacterial infections (IAI) hepatocellular carcinoma (HCC)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure and Corrosion Behavior of the As-Extruded Mg-4Zn-2Gd-0.5Ca Alloy

引用

Acta Metallurgica Sinica(English Letters) 2020年第3期33卷 362-374页

作者： Hao-Yi Niu Fang-Fang Cao Kun-Kun Deng kai-Bo nie Jin-Wen Kang Hong-Wei Wang Shanxi Key Laboratory of Advanced Magnesium-Based Materials College of Materials Science and EngineeringTaiyuan University of TechnologyTaiyuan 030024China

In order to study the corrosion resistance of extruded magnesium alloys,the Mg-4Zn-2Gd-0.5Ca alloy was extruded at the speed of 0.01-0.1 mm/s with the temperature of 280-360℃in present *** extrusion results show that the volume fraction of precipitates(Vpre),VDRX(the dynamic recrystallization rate) and the average size of DRXed grain(dDRX) decrease with the decrease in extrusion speed,and the corrosion rate of the alloy also shows a downward *** the contrary,the values of Vpre,VDRX and dDRX increase with the increase in extrusion temperature,and the corrosion resistance of Mg-4Zn-2Gd-0.5Ca alloy *** the extrusion speed is 0.01 mm/s and the extrusion temperature is 280℃,the alloy has the best corrosion *** corrosion of extruded Mg-4Zn-2Gd-0.5Ca alloy occurs preferentially on the magnesium matrix around W and I phases in the DRXed *** the further corrosion,the corrosion continues to spread along the phase,and the corrosion area gradually *** corrosion plays a leading role in the corrosion ***,there are a large number of basal plane textures in the unDRXed region,which is conducive to improving the corrosion resistance of magnesium *** addition,the decrease in grain size also makes the corrosion of magnesium alloy more uniform.

关键词： Mg-4Zn-2Gd-0.5Ca alloy Extrusion EIS(electrochemical impedance spectroscopy) Weight loss Corrosion resistance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：