检索结果-南通市图书馆

Measurements of Formaldehyde and TVOC Emission from Paints and Coating Materials using Small Chamber Method for Building Composites

引用

Journal of Wuhan University of Technology(Materials Science) 2012年第1期27卷 120-125页

作者： Jin-A kim Sumin kim hyun-Joong kim Janghoo SEO National Instrumentation Center for Environmental Management Seoul National University Seoul 151-921 Republic of Korea Laboratory of Adhesion & Bio-Composites Program in Environmental Materials Science Seoul National University Seoul 151-921 Republic of Korea Building Environment & Materials Lab School of Architecture Soongsil University Seoul 156-743 Republic of Korea School of Architecture Chosun University Gwangju 507-759 Korea

An optimal test method for paint is proposed; additionally, the Field and Laboratory Emission Cell （FLEC） method used in Europe is applied as a substitute for the 20 L small chamber method. The emission factors of total volatile organic compounds （TVOC） and formaldehyde from oil-based paint, emulsion paint, and water-dispersion paint with a coating weight of 300 g/m2, cured for 24/48 hours, were measured using the 20 L small chamber method. The emission rate of TVOC and formaldehyde from all paints began to stabilize after approximately 7 days after 24/48 hours of curing even though Korean standards stipulate that paint should be measured and analyzed after the third day of application. The emission factor of TVOC and formaldehyde from oil-based, emulsion, and water-dispersion paints were also measured using the FLEC method. There was good correlation between the 20 L small chamber method and the FLEC method for oil-based, emulsion, and water-dispersion paint emissions. With the FLEC method, using paints prepared under identical conditions, the emission rate was stable 24 hours after installation of samples because the air flow rate of FLEC is much higher than that of a 20 L small chamber, and the relative cell volume of FLEC is much smaller than that of a 20 L small chamber.

关键词： formaldehyde TVOC paints coating materials FLEC

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Grain size dependence of flow stress in ECAPed Ti with constant texture

引用

中国有色金属学会会刊：英文版 2012年第S3期22卷 673-677页

作者： Chang-Young hyun Ho-Kyung kim Department of Materials Science and Engineering Seoul National University of Science and Technology Department of Automotive Engineering Seoul National University of Science and Technology

The effect of grain size on the flow stress in an ECAPed Ti with a constant texture was investigated,assuming that 2,4,5 and 6 passes microstructures have a similar *** average size of recrystallized grains decreased to 0.5 μm,0.4 μm,and 0.3 μm with respect to the ECAP pass number of 2,4,and 6,*** ultimate tensile strength (UTS) and yield strength (YS) increase with an increase in the number of *** UTS and YS of the 6 passes ECAPed sample were found to be 740.2 MPa and 580.3 MPa,*** equation for the flow stress of an ECAPed Ti with a constant texture as a function of the strain and grain size was derived for the ECAPed *** following equation was finally obtained:σ(ε)=103.9+1825ε-9.6ε1/2·d-1/2+8.3d-1/2.

关键词： Ti mechanical properties grain size flow stress equal channel angular pressing

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Production of chitosan-based composite film reinforced with lignin-rich lignocellulose nanofibers from rice husk

引用

Journal of Bioresources and Bioproducts 2024年第2期9卷 174-184页

作者： Hye jee Kang Yeon Ju Lee Jin Kyoung Lee Irnia Nurika Sri Suhartini Deokyeong Choe Dong hyun kim Hoon Choi Natasha P.Murphy Ho Yong kim Young Hoon Jung School of Food Science and Biotechnology Kyungpook National UniversityDaegu 41566Republic of Korea CPR S&T Co. Ltd.Gunpo 15880Republic of Korea Department of Agroindustrial Technology Faculty of Agricultural TechnologyUniversitas BrawijayaMalang 65145Indonesia Renewable Resources and Enabling Sciences Center National Renewable Energy LaboratoryGoldenCO 80401United States Center for Bio-based Chemistry Korea Research Institute of Chemical TechnologyUlsan 44429Republic of Korea

Lignocellulosic nanofibers(LCNFs),implying lignin-containing cellulose fibers,maintain the prop-erties of both lignin and cellulose,which are hydrophobic and hydrophilic,*** pres-ence of hydrophobic lignin in LCNFs is expected to be an economical and attractive option that can improve the thermal and mechanical properties of ***,this study was conducted to produce lignin-rich LCNFs from sugar-rich waste obtained from rice husks after acidic *** LCNFs were produced from the lignin-rich solid fractions obtained after pretreatment and enzymatic hydrolysis,which were then incorporated as an additive into a chitosan-based *** variations in lignin content in the range of approximately 50.6%-66.8%in differently obtained LCNFs gave significantly different optical strengths and mechanical *** controllable processes may allow for customized film ***,the glucose-rich liquid fractions obtained after pretreatment and enzymatic hydrolysis were used as a substrate for ethanol fermentation to achieve total utilization of rice husk biomass *** conclusion,the lignin-rich biomass fraction holds promise as a suitable material for chitosan-LCNF film and has the potential to increase the economic feasibility of the biomaterial industry.

关键词： Rice husk Lignocellulose nanofiber Lignin-based material Chitosan film Upcycling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Slip-enhanced Reverse Electrodialytic Power Generation in Ion-selective Nanochannels

引用

Journal of Thermal Science 2013年第1期22卷 36-41页

作者： Byeongdong Kang Jaisuk Yoo hyun Jung kim Dong-Kwon kim Department of Mechanical Engineering Ajou University

Power generation by reverse electrodialysis in ion-selective nanochannels is numerically investigated. Especially,in the present study, the influence of hydrodynamic slip at the surface of nanochannels is investigated. The current-potential characteristics of the nanochannels are calculated by solving several governing equations:Nernst-Planck equation for the ionic concentrations, the Poisson equation for the electric potential, and the Navier-Stokes equation for the diffusioosmotic flow. Hydrodynamic slip is applied as the boundary condition at the surface of nanochannels. As the slip length increases, the diffusioosmotic flow velocity and electrical conductance of ions increase because the friction at the surface of nanochannels decreases. It is shown that the power generation is enhanced by 44% with a moderate 100nm slip length by using a nanochannel with 10nm height.

关键词： Reverse electrodialysis Ion-selective nanochannel Power generation Slip length

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Coordination polymers： Challenges and future scenarios for capture and degradation of volatile organic compounds

引用

Nano Research 2016年第11期9卷 3181-3208页

作者： Kowsalya Vellingiri Pawan Kumar Ki-hyun kim Department of Civil and Environmental Engineering Hanyang uniVersity 222 Wangsimni-RoSeoul 04763Republic of Rorea Department of Nano Sciences and Materials Central University of Jammu Jammu 181143 India

Over the past few decades, coordination polymers/metal organic frameworks （CPs/MOFs） have drawn a great deal of attention for diverse applications due to their advantages of intrinsically ttLnable chemical structure, flexible architecture, high pore volume, high surface area, multifunctional properties, etc. To date, numerous CPs/MOFs have been developed and employed for the treatment and control of gaseous pollutants, such as volatile organic compounds （VOCs）, through capture, sorptive removal, and catalytic degradation. Nevertheless, there are also some key drawbacks and challenges for the practical application of these systems （e.g., poor selectivity, high energy （and fiscal） cost, high synthesis cost, low capacity, and difficulties in regeneration and recycling）. In this review, recent developments in CPs/MOFs research are described with their associated mechanisms for capture, sorptive removal, and catalytic degradation of VOCs. To this end, we discuss the key variables and challenges for afforded abatement of VOCs through CPs/MOFs technologies. Hopefully, this review will help the scientific community set future directions for the advancement of CPs/MOFs techniques for the effective management of diverse environmental issues.

关键词： coordination polymers/metal organic frameworks(CPs/MOFs) volatile organic compounds sorptive removalcatalytic degradation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Production of Integrated Automotive Part in High Pressure Diecasting Process Using Salt Core

引用

Journal of Rare Earths 2004年第Z2期22卷 57-60页

作者： Ki-Bae kim hyun-Kwang Seok Jun-Su kim Advanced Materials Research Center Korea Institute of Science and TechnologyP.O.Box 131CheongryangSeoul130-650Korea Advanced Materials Research CenterKorea Institute of Science and TechnologyP.O.Box 131CheongryangSeoul130-650Korea Research & Development CenterTechnology Union Co.Ltd742-1Paeksok-dongChonan-siChungchongnam-do330-220Korea

A new concept of salt core, a melting temperature of which is lower than the solidus temperature of cast alloy,was introduced to produce an integrated casting part having a complicated inner shape or requiring under-cut in high pressure die casting or squeeze casting process. A salt core, named a fusible core in this paper because the salt core can be easily extracted just as holding at a temperature under a solidus temperature of a casting alloy, was developed and applied to produce a fuel control part for automotive GDI engine in high pressure diecasting machine. A different salt material of a lower melting temperature than that of A1 alloy was mixed with a different ceramic particulate to improve a thermo-physical property of fusible core. The thermo-physical property of the fusible core was measured and a weight faction of the ceramic particulate was optimized. The selected core materials were poured in metallic mold by gravity to produce a fusible core for a fuel control part for automotive GDI engine. The fuel control part, which the fusible core was included inside, was successful to fabricate in a conventional diecasting machine with no melting of fusible core during casting.

关键词： salt core high pressure diecasting casting part for automotive fusible core

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Development of a fault-rupture environment in 3D: A numerical tool for examining the mechanical impact of a fault on underground excavations

引用

International Journal of Mining Science and Technology 2019年第1期29卷 105-111页

作者： Bo-hyun kim Mark K.Larson Spokane Mining Research Division CDC/NIOSH

While faults are commonly simulated as a single planar or non-planar interface for a safety or stability analysis in underground mining excavation, the real 3D structure of a fault is often very complex, with different branches that reactivate at different times. Furthermore, these branches are zones of nonzero thickness where material continuously undergoes damage even during interseismic periods. In this study, the initiation and the initial evolution of a strike-slip fault was modeled using the FLAC3D software program. The initial and boundary conditions are simplified, and mimic the Riedel shear experiment and the constitutive model in the literature. The FLAC3D model successfully replicates and creates the 3D fault zone as a strike-slip type structure in the entire thickness of the model. The strike-slip fault structure and normal displacement result in the formation of valleys in the model. Three panels of a longwall excavation are virtually placed and excavated beneath a main valley. The characteristics of stored and dissipated energy associated with the panel excavations are examined and observed at different stages of shear strain in the fault to evaluate bump potential. Depending on the shear strain in the fault, the energy characteristics adjacent to the longwall panels present different degrees of bump potential, which is not possible to capture by conventional fault simulation using an interface.

关键词： 3D fault zone Strike-slip fault FLAC3D Bump potential Energy characteristics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical Study on Air Turbines with Enhanced Techniques for OWC Wave Energy Conversion

引用

China Ocean Engineering 2017年第5期31卷 517-527页

作者： CUI Ying hyun Beom-Soo kim Kilwon Department of Ocean Engineering College of EngineeringOcean University of China Division of Naval Architecture and Ocean Engineering Korea Maritime and Ocean University

In recent years,the oscillating water column(OWC) wave energy converter,which can capture wave energy from the ocean,has been widely applied all over the *** the essential part of the OWC system,the impulse and Wells turbines are capable of converting the low pressure pneumatic energy into the mechanical shaft *** an enhanced technique,the design of endplate or ring attached to the blade tip is investigated numerically in this paper.3 D numerical models based on a CFD-software FLUENT 12.0 are established and validated by the corresponding experimental results from the reports of Setoguchi et al.(2004) and Takao et al.(2001).Then the flow fields and non-dimensional evaluating coefficients are calculated and analyzed under steady *** show that the efficiency of impulse turbine with ring can reach up to 0.49 when Ф=1,which is 4% higher than that in the cases for the endplate-type and the original *** the ring-type Wells turbine with fixed guide vanes shows the best performance with the maximal efficiency of 0.55,which is 22% higher than that of the original *** addition,the quasi-steady analysis is used to calculate the mean efficiency and output-work of a wave cycle under sinusoidal flow *** all together,this study provides support for structural optimization of impulse turbine and Wells turbine in the future.

关键词： OWC impulse turbine Wells turbine CFD endplate ring quasi-steady analysis

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Comparative toxicity of silver nanoparticles and silver ions to Escherichia coli

引用

Journal of Environmental Sciences 2018年第4期30卷 50-60页

作者： Yoojin Choi hyun-A kim Kyoung-Woong kim Byung-Tae Lee Department of Chemical and Biomolecular Engineering (BK21 Plus Program) Korea Advanced Institute of Science and Technology (KAIST) School of Earth Sciences and Environmental Engineering Gwangju Institute of Science and Technology (GIST)

With the increase in silver（Ag）-based products in our lives, it is essential to test the potential toxicity of silver nanoparticles（Ag NPs） and silver ions（Ag ions） on living organisms under various conditions. Here, we investigated the toxicity of Ag NPs with Ag ions to Escherichia coli K-12 strain under various conditions. We observed that both Ag NPs and Ag ions display antibacterial activities, and that Ag ions had higher toxicity to E. coli K-12 strain than Ag NPs under the same concentrations. To understand the toxicity of Ag NPs at a cellular level, reactive oxygen species（ROS） enzymes were detected for use as antioxidant enzymatic biomarkers. We have also studied the toxicity of Ag NPs and Ag ions under various coexistence conditions including： fixed total concentration, with a varied the ratio of Ag NPs to Ag ions; fixed the Ag NPs concentration and then increased the Ag ions concentration; fixed Ag ions concentration and then increasing the Ag NPs *** to Ag NPs and Ag ions clearly had synergistic toxicity; however, decreased toxicity（for a fixed Ag NPs concentration of 5 mg/L, after increasing the Ag ions concentration） to E. coli K-12 strain. Ag NPs and Ag ions in the presence of L-cysteine accelerated the bacterial cell growth rate, thereby reducing the bioavailability of Ag ions released from Ag NPs under the single and coexistence conditions. Further works are needed to consider this potential for Ag NPs and Ag ions toxicity across a range of environmental *** Significance Statement： As silver nanoparticles（Ag NPs）-based products are being broadly used in commercial industries, an ecotoxicological understanding of the Ag NPs being released into the environment should be further considered. Here, we investigate the comparative toxicity of Ag NPs and silver ions（Ag ions） to Escherichia coli K-12 strain, a representative ecotoxicological bioreporter. This study showed that toxicities of Ag NPs and Ag ions to E. coli

关键词： Nanotoxicity Silver nanoparticles Silver ions Coexist condition Escherichia coli

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Targeting the RAS/RAF/MAPK pathway for cancer therapy: from mechanism to clinical studies

引用

Signal Transduction and Targeted Therapy 2024年第1期9卷 173-210页

作者： Md Entaz Bahar hyun Joon kim Deok Ryong kim Department of Biochemistry and Convergence Medical Sciences and Institute of Medical Science Gyeongsang National UniversityCollege of MedicineJinjuSouth Korea Department of Anatomy and Convergence Medical Sciences and Institute of Medical Science Gyeongsang National UniversityCollege of MedicineJinjuSouth Korea

Metastatic dissemination of solid tumors,a leading cause of cancer-related mortality,underscores the urgent need for enhanced insights into the molecular and cellular mechanisms underlying metastasis,chemoresistance,and the mechanistic backgrounds of individuals whose cancers are prone to *** most prevalent signaling cascade governed by multi-kinase inhibitors is the mitogen-activated protein kinase(MAPK)pathway,encompassing the RAS–RAF–MAPK kinase(MEK)–extracellular signal-related kinase(ERK)*** kinase is a primary mediator of the MAPK pathway,responsible for the sequential activation of downstream targets,such as MEK and the transcription factor ERK,which control numerous cellular and physiological processes,including organism development,cell cycle control,cell proliferation and differentiation,cell survival,and *** in this signaling cascade are associated with diseases such as *** inhibitors(RAFi)combined with MEK blockers represent an FDAapproved therapeutic strategy for numerous RAF-mutant cancers,including melanoma,non-small cell lung carcinoma,and thyroid ***,the development of therapy resistance by cancer cells remains an important ***,an intracellular lysosome-dependent catabolic recycling process,plays a critical role in the development of RAFi resistance in ***,targeting RAF and autophagy could be novel treatment strategies for RAF-mutant *** this review,we delve deeper into the mechanistic insights surrounding RAF kinase signaling in tumorigenesis and ***,we explore and discuss the ongoing development of next-generation RAF inhibitors with enhanced therapeutic ***,this review sheds light on the functional interplay between RAF-targeted therapies and autophagy in cancer.

关键词： RAF insight mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：