检索结果-南通市图书馆

Stomatal dynamics are regulated by leaf hydraulic traits and guard cell anatomy in nine true mangrove species

中国烟草学会2017年学术年会

作者： B.Li L.C.Zhao L.Wang C.Liu k.g.mcadam B.Wang Zhengzhou Tobacco Research Institute of CNTC

Heat and mass transfer inside a burning cigarette directly influence the level and chemical composition of its mainstream and sidestream emissions. During a 2-s 35 m L model puffing regime, different thermophysical processes occur inside the burning coal as a result of forced air flow, including rapid temperature rise up to 900?C and a series of pyrolytic or oxidative reactions leading to the formation of smoke aerosol. Accurate measurements of transient thermophysical parameters such as temperature,pressure and gas velocity are thus an essential step towards understanding the smoke formation. In this study, we have developed micro-sensors that can be accurately inserted at specific locations into a 3 R4 F research reference cigarette, and used to follow these sensitive and highly dynamic responses as a result of the puffing burn. Both temperature and pressure responses were systematically measured, and in combination with a computational method based on Darcy’s Law, we obtained the gas flow velocity of the burning cigarette puffed under a standard machine-smoking protocol. These quantitative data provide unparalleled insights into the complex thermochemical processes responsible for smoke formation inside a burning cigarette.

关键词： Cigarette gas-phase Temperature Pressure Velocity Distribution

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

Plant Diversity 2024年第3期46卷 395-405页

作者： Ya-Dong Qie Qi-Wei Zhang Scott A.M.mcadam kun-Fang Cao State key Laboratory for Conservation and Utilization of Subtropical Agro-Bioresources College of ForestryGuangxi UniversityNanning 530004China guangxi key Laboratory of Forest Ecology and Conservation College of ForestryGuangxi UniversityNanning 530004China key Laboratory of Ecology of Rare and Endangered Species and Environmental Protection Ministry of EducationGuangxi Normal UniversityGuilin 541001China guangxi key Laboratory of Landscape Resources Conservation and Sustainable Utilization in Lijiang River Basin Guangxi Normal UniversityGuilin 541001China Purdue Center for Plant Biology Department of Botany and Plant PathologyPurdue UniversityWest LafayetteIN 47907USA

Stomatal regulation is critical for mangroves to survive in the hyper-saline intertidal zone where water stress is severe and water availability is highly ***,very little is known about the stomatal sensitivity to vapour pressure deficit(VPD)in mangroves,and its co-ordination with stomatal morphology and leaf hydraulic *** measured the stomatal response to a step increase in VPD in situ,stomatal anatomy,leaf hydraulic vulnerability and pressure-volume traits in nine true mangrove species of five families and collected the data of genome *** aimed to answer two questions:(1)Does stomatal morphology influence stomatal dynamics in response to a high VPD in mangroves?with a consideration of possible influence of genome size on stomatal morphology;and(2)do leaf hydraulic traits influence stomatal sensitivity to VPD in mangroves?We found that the stomata of mangrove plants were highly sensitive to a step rise in VPD and the stomatal responses were directly affected by stomatal anatomy and hydraulic ***,denser stomata was correlated with faster stomatal closure at high VPD across the species of Rhizophoraceae,and stomata size negatively and vein density positively correlated with genome *** negative leaf osmotic pressure at the full turgor(πo)was related to higher operating steady-state stomatal conductance(gs);and a higher leaf capacitance(Cleaf)and more embolism resistant leaf xylem were associated with slower stomatal responses to an increase in *** addition,stomatal responsiveness to VPD was indirectly affected by leaf morphological traits,which were affected by site salinity and consequently leaf water *** results demonstrate that mangroves display a unique relationship between genome size,stomatal size and vein packing,and that stomatal responsiveness to VPD is regulated by leaf hydraulic traits and stomatal *** work provides a quantitative framework to better understand of stomatal regulation in mangroves

关键词： Stomatal temporal kinetics Vapour-pressure deficit(VPD) Leaf water relations Leaf hydraulic vulnerability Leaf osmotic potential genome size

Compression properties of cost-efficient porous expanded clay reinforced AA7075 syntactic foams fabricated by industrial-oriented die casting technology

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第1期21卷 60-70页

作者： İsmail Cem Akgün Çağın Bolat Ali gökşenli Faculty of Mechanical Engineering Istanbul Technical University34437İstanbulTurkey Faculty of Engineering Samsun University55420SamsunTurkey

In today’s manufacturing industries,hard competition between rival firms makes it compulsory for researchers to design lighter and cheaper machine components due to the megatrends of cost-effectiveness and *** this point,aluminum syntactic foams(ASFs)are new-generation engineering composites and come into the upfront as a *** to their features like low density,sufficient elongation,and perfect energy absorption ability,these advanced foams have been considerably seductive for many industrial sectors *** this study,an industrial-oriented automatic die casting technology was used for the first time to manufacture the combination of AA7075/porous expanded clay(PEC).Micro evaluations(optical and FESEM)reveal that there is a homogenous particle distribution in the foam samples,and inspections are compatible with the other ASF ***,T6 aging heat treatment was operated on one half of the produced foams to explore the probable impact of aging on the compressive *** results show that PEC particles can be an alternative to expensive hollow spheres used in the previous ***,a favorable relationship is ascertained between the aging treatment and mechanical properties such as compression strength and plateau strength.

关键词： die casting porous materials metal matrix sytanctic foams expanded clay compressive deformation

Multiple sclerosis drug repurposing for neuroregeneration

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2024年第3期19卷 507-508页

作者： Peter göttle Michael Dietrich Patrick küry Department of Neurology Medical FacultyHeinrich-Heine UniversityDüsseldorfGermany

Multiple sclerosis(MS)is an autoimmune disorder of the central nervous system(CNS)and is primarily characterized by immune cell infiltration leading to relapses followed by remission phases and a disease course turning progressive over time with neurodegenerative processes taking over(Amin and Hersh,2023).Of note,beyond relapse-associated worsening early in disease progression independent of relapse activity may arise independently of relapse activity and can occur in all ***-mediated damage of myelin sheaths and the subsequent loss of mature oligodendrocytes are resulting in impaired axonal integrity,neurodegeneration and accounts for irreversible neuronal damage(kuhlmann et al.,2023).The current landscape of available disease-modifying therapies comprises mainly immunomodulatory drugs that effectively diminish relapses and slow down progression at the onset form of the disease,namely relapsing MS(RMS).In this regard,a number of drugs have been approved as disease-modifying therapies for MS by US Food and Drug Administration and European Medicines Agencies(Box 1).

关键词： drugs impaired irreversible

Influence of curing conditions on the shrinkage behavior of three-dimensional printed concrete formwork

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第8期18卷 1225-1236页

作者： M.BEkAERT k.van TITTELBOOM g.de SCHUTTER Magnel-Vandepitte Laboratory for structural Engineering and Building Materials Department of Structural Engineering and Building MaterialsFaculty of Engineering and ArchitectureGhent UniversityGhent 60 B-9052Belgium

The use of three-dimensional(3D)printed concrete as formwork is becoming more widely applied within the ***,the technology is still not optimized and there are many reports of preliminary cracking during the curing of cast *** is believed to result from differential shrinkage between the printed and cast *** cracks(in the printed concrete or at the interface between the infill and printed concrete)form a preferential path for aggressive substances and can reduce the durability of the combined concrete *** ensure the desired service life of the structure,it is important that the differential shrinkage between cast and printed concrete is *** study investigated the effect of curing conditions on the differential shrinkage behavior of 3D and cast *** influence of prewetting of the dry-cured 3D printed formwork was also *** the experimental program,a vibrated and self-compacting concrete were used as cast *** 3D printed formwork was produced and combined with cast concrete to simulate a concrete *** formwork was cured for 1,7,or 28 d exposed to the air(relative humidity:60%or 95%)or submerged in *** length change of the combined elements was observed over 56 d after concrete casting and throughout the thickness of the *** show that increasing the curing period in dry conditions of the printed concrete leads to an expansion of the formwork on the first day after *** expansion leads to a non-uniform strain evolution throughout the curing period of the combined *** concrete formwork stored in wet conditions does not expand after the casting process but tends to show a decreasing linear deformation within the whole elements.

关键词： 3D concrete printing formwork shrinkage curing

Excellent photoluminescence and electrochemical properties of Sm^(3+) doped Ca_(2)MgSi_(2)O_(7) nanophosphor:Display and electrochemical sensor applications

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第6期42卷 1046-1055,I0002页

作者： R.B.Basavaraj k.Sureshkumar D.P.Aarti M.B.Madhusudana Reddy g.Nagaraju T.Ramakrishnappa g.R.Navyashree k.R.Venkatesha Babu k.S.Hemalatha Department of Physics BMS Institute of Technology and ManagementBangalore560064India Department of Chemistry BMS Institute of Technology and ManagementBangalore560064India Department of Chemistry School of Applied SciencesREVA UniversityBangalore560064India Energy Materials ResearchLaboratory Department of ChemistrySiddaganga Institute of TechnologyTumakuru57203KarnatakaIndia School of Physical Sciences REVA UniversityBangalore560057Indi Department of Physics Govt.Science CollegeBengaluru560001India Department of Physics Maharani Science College for WomenMaharani Cluster UniversityBengaluru560001India

A series of orange-red light emitting Ca_(2)MgSi_(2)O_(7):Sm^(3+)nanopowders were fabricated via low-cost ecofriendly green combustion technique using Aloe vera gel as *** phase purity of the samples were confirmed by the powder X-ray diffraction(PXRD)*** single-phase tetragonal structure is observed from the PXRD results with no additional impurity *** band gap energy of the fabricated powders was estimated by diffuse reflectance spectra(DRS)and is found to be in the range of 4.01-5.98 eV.A high resolution scanning electron microscope(SEM)was used to study the morphological behaviour of the ***-like structures are observed from the SEM *** particle size was evaluated by transmission electron microscopy(TEM)and is found to be~50 *** interplanar distance is found to be 0.53 *** properties were systematically studied in *** phosphors are successfully excited at 403 nm NUV light,producing reddish-orange characteristic *** emission peaks are centered at 558(^(4)g_(5/2)→^(6)H_(5/2)),607(^(4)g_(5/2)→^(6)H_(7/2))and 645 nm(^(4)g_(5/2)→^(6)H_(9/2)),*** the observed peaks the red emanation(^(4)g_(5/2)→^(6)H_(7/2))is stronger than the orange emission(^(4)g_(5/2)→^(6)H_(5/2))in the current *** photoluminescent concentration quenching is noticed above 5 mol%Sm^(3+)ion doping *** dipole-dipole interaction resulting in cross relaxation is found to be the principal cause of concentration quenching *** color features such as Commission Internationale de I’Eclairage(CIE)and correlated color temperature(CCT)were studied in *** optimized chromaticity coordinates were estimated to be(0.6363,0.3632),which fall in the reddish-orange *** average CCT value obtained is 3362 *** average color purity is found to be~82%.Sm^(3+)incorporated Ca_(2)MgSi_(2)O_(7) samples are possible contender for single white light generation commercial candidates owing to

关键词： green combustion Photoluminescence Orange-red emission Color purity Sensors Rare earths

Photometric Studies of EV Cnc and AH Cnc in the Open Cluster M67

在线全文

学校读者我要写书评

暂无评论

Research in Astronomy and Astrophysics 2024年第8期24卷 196-211页

作者： Mamatha Rani g. k.Sriram Deblina Lahiri Vijaya,A. Department of Astronomy Osmania UniversityHyderabad 500007India

Contact binaries at various stages of evolution unveil various operating mechanisms that drive *** report the photometric and period variation analysis of two contact binaries EV Cnc and AH Cnc in open cluster *** observed the cluster from the JCBT 1.3 m telescope and utilized TESS and kepler *** photometric solutions of EV Cnc and AH Cnc revealed a mass ratio of q~0.41 and~0.15 with an inclination of i=42°and87°*** solutions suggest that EV Cnc is probably a semi-detached and AH Cnc is a deep low-mass ratio contact *** study of O-C variation analysis indicates that for both systems,the period is increasing which suggests the mass transfer is occurring from secondary to *** the case of AH Cnc and based on simulations by randomly varying the time of minima to fit the LITE solution,we noted the third body orbital period to be around P_(3)=26.82±2.54 yr,which is different from earlier reported values and conclude that future observations are required to confirm this *** compare these two systems with other similar contact binaries to get an estimate of the final configuration of the respective systems.

关键词： (stars)binaries(including multiple) close-(stars)binaries eclipsing-stars activity

Supposition of graphene stacks to estimate the contact resistance and conductivity of nanocomposites

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第4期45卷 663-676页

作者： Y.ZARE M.T.MUNIR g.J.WENg k.Y.RHEE Biomaterials and Tissue Engineering Research group Department of Interdisciplinary TechnologiesBreast Cancer Research CenterMotamed Cancer InstituteTehran ***Iran College of Engineering and Technology American University of the Middle EastEgaila 54200Kuwait Department of Mechanical and Aerospace Engineering Rutgers UniversityNew BrunswickNJ 08903U.S.A. Department of Mechanical Engineering(Bk21 Four) College of EngineeringKyung Hee UniversityYongin 446701Republic of Korea

In this study,the effects of stacked nanosheets and the surrounding interphase zone on the resistance of the contact region between nanosheets and the tunneling conductivity of samples are evaluated with developed equations superior to those previously *** contact resistance and nanocomposite conductivity are modeled by several influencing factors,including stack properties,interphase depth,tunneling size,and contact *** developed model's accuracy is verified through numerous experimental *** further validate the models and establish correlations between parameters,the effects of all the variables on contact resistance and nanocomposite conductivity are ***,the contact resistance is primarily dependent on the polymer tunnel resistivity,contact area,and tunneling *** dimensions of the graphene nanosheets significantly influence the conductivity,which ranges from 0 S/m to90 S/*** increased number of nanosheets in stacks and a larger gap between them enhance the nanocomposite's ***,the thicker interphase and smaller tunneling size can lead to higher sample conductivity due to their optimistic effects on the percolation threshold and network efficacy.

关键词： graphene polymer composite stacked nanosheet tunneling conductivity contact resistance interphase

Photon orbits and phase transition for Letelier AdS black holes immersed in perfect fluid dark matter

在线全文

学校读者我要写书评

暂无评论

Chinese Physics C 2024年第6期48卷 247-259页

作者： Ashima Sood Md Sabir Ali J.k.Singh Sushant g.ghosh Department of Mathematics Netaji Subhas University of TechnologyNew Delhi-110078India Centre for Theoretical Physics Jamia Millia IslamiaNew Delhi 110025India Department of Physics Mahishadal Raj CollegePurba MedinipurWest Bengal721628India Institute of Theoretical Physics&Research Center of gravitation Lanzhou UniversityLanzhou 730000China key Laboratory of Quantum Theory and Applications of MoE Lanzhou UniversityLanzhou 730000China Lanzhou Center for Theoretical Physics&key Laboratory of Theoretical Physics of gansu Province Lanzhou UniversityLanzhou 730000China Astrophysics and Cosmology Research Unit School of MathematicsStatistics and Computer ScienceUniversity of KwaZulu-NatalPrivate Bag X54001Durban 4000South Africa

We obtain an exact solution for spherically symmetric Letelier AdS black holes immersed in perfect fluid dark matter(PFDM).Considering the cosmological constant as the positive pressure of the system and volume as its conjugate variable,we analyze the thermodynamics of our black holes in the extended phase *** to the background clouds of strings parameter(a)and the parameter endowed with PFDM(β),we analyze the Hawking temperature,entropy,and specific ***,we investigate the relationship between the photon sphere radius and phase transition for the Letelier AdS black holes immersed in *** the analysis,with a particular condition,non-monotonic behaviors are found between the photon sphere radius,impact parameter,PFDM parameter,temperature,and *** can regard the changes in both the photon sphere radius and impact parameter before and after phase transition as the order parameter;their critical exponents near the critical point are equal to the same value,1/2,similar to that in ordinary thermal *** indicates that a universal relation of gravity may exist near the critical point for a black hole thermodynamic system.

关键词： AdS black holes perfect fluid dark matter Letelier spacetime photon orbit extended phase space thermodynamics correlation of photon orbit and thermodynamics