检索结果-南通市图书馆

MXene ink hosting zinc anode for high performance aqueous zinc metal batteries

Journal of Energy Chemistry 2023年第1期76卷 187-194,I0005页

作者： Jae Min Park Milan Jana Sang Ha Baek Taehun Kang Peixun Xiong Jeong Hee Park jun soo kim.ali shayesteh zeraati Mikhail Shekhirev Paul V.Braun Yury Gogotsi Ho Seok Park School of Chemical Engineering Sungkyunkwan University2066SeoburoJangan-guSuwon 440-746Republic of Korea Department of Chemical and Petroleum Engineering University of Calgary2500 University Dr NWCalgary T2N 1N4Canada Department of Materials Science and Engineering Materials Research LaboratoryBeckman Institute for Advanced Science and TechnologyUniversity of Ilinois at Urbana-ChampaignUrbanaIL61801USA A.J.Drexel Nanomaterials Institute and Department of Materials Science and Engineering Drexel UniversityPhiladelphiaPA 19104USA SKKU Institute of Energy Science and Technology(SIEST) Sungkyunkwan University2066SeoburoJangan-guSuwon 440-746Republic of Korea SKKU Advanced Institute of Nano Technology(SAINT) Sungkyunkwan University 2066SeoburoJangan-guSuwon 440-746Republic of Korea

Despite the safety,low cost,and high theoretical capacity(820 mA h g^(-1))of Zn metal anodes,the practical application of aqueous Zn metal batteries remains a critical challenge due to the Zn dendrite growth,corrosion,and hydrogen evolution ***,we demonstrate the MXene ink hosting Zn metal anodes(MX@Zn)for high-performance and patternable Zn metal full *** as-designed MX@Zn electrode is more facile and reversible than bare Zn and CC@Zn,as verified by better cyclic stability and lower overpotentials of symmetric cells with the plating capacity of 0.05 mA h cm^(-2)at 0.1 m A cm^(-2)and of 1 m A h cm^(-2)at 1 m A cm^(-2).The MX@Zn|MnO_(2)full cells deliver a high specific capacity of 281.9 m A h g^(-1),91.5%of the theoretical capacity,achieving 50%capacity retention from 60 mA g^(-1)to 300 mA g^(-1)and 79.7%of initial capacity after 200 ***,the patterned devices based on the MX@Zn electrode achieve high energy and power densities of 348.57 Wh kg^(-1)and 1556 W kg^(-1),respectively,along with a capacity retention of 64%and Coulombic efficiency of 99%over 500 *** high performance of MX@Zn is attributed to the high electrical conductivity and hydrophilicity of MXene and rapid ion diffusion through the 3D interconnected porous channels.

关键词： MXene ink Zinc anode Metal batteries Patterning Electrodeposition

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A nanofilter composed of carbon nanotube-silver composites for virus removal and antibacterial activity improvement

引用

Journal of Environmental Sciences 2016年第4期28卷 275-283页

作者： jun Pyo kim Jae Ha kim Jieun kim soo No Lee Han-Oh Park Nano Development Team Bioneer Corporation Daejeon 306-220 Republic of Korea

We have developed a new nanofilter using a carbon nanotube-silver composite material that is capable of efficiently removing waterborne viruses and *** nanofilter was subjected to plasma surface treatment to enhance its flow rate,which was improved by approximately 62%.Nanoscale pores were obtained by fabricating a carbon nanotube network and using nanoparticle fixation technology for the removal of *** pore size of the nanofilter was approximately 38 nm and the measured flow rate ranged from 21.0 to 97.2 L/（min·m^2）under a pressure of 1–6 kgf/cm^2 when the amount of loaded carbon nanotube-silver composite was 1.0 mg/cm^*** nanofilter was tested against Polio-,Noro-,and Coxsackie viruses using a sensitive real-time polymerase chain reaction assay to detect the presence of viral particles within the *** trace of viruses was found to flow through the nanofilter with carbon nanotube-silver composite loaded above 0.8 mg/cm^***,the surface of the filter has antibacterial properties to prevent bacterial clogging due to the presence of 20-nm silver nanoparticles,which were synthesized on the carbon nanotube surface.

关键词： Carbon nanotube Silver nanoparticle Virus removal Nanofilter Water purification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Parametric design of a part with free-form surfaces

引用

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2006年第9期7卷 1530-1534页

作者： kim Yeoung-il kim Li-ra jun Cha-soo Reseach Institute for CAD/CAM CITEK System Changwon 641-845 Korea School of Industrial and Systems Engineering Gyeongsang National University Jinju 660-701 Korea Research Center for Aircraft Parts Technology School of Industrial and Systems Engineering Gyeongsang National University Jinju 660-701 Korea

3D solid models for parts with regular-form surfaces (PRFSs) are effectively generated using traditional parametric design techniques. A new model is obtained by changing some parameters defining the model. The parts with free-form surfaces (PFFSs), however, cannot be defined by several parameters. Usually they are defined by some geometric elements like profile curves. The traditional parametric design approaches have not easily dealt with the PFFSs. A method for generating a solid model and an engineering drawing for PFFSs is proposed in this paper: First, the new profiles are generated from input point data. Second, the profile information is extracted from the existing model. Last, the old profiles are replaced with the new profiles. This method can preserve the associative information of the existing model and automatically generate the drawing including views, dimen- sions, and annotations. The proposed method has been implemented using a commercial CAD/CAM system, Unigraphics, and API functions written in C-language, and were applied to the blades of a turbine generator. Some illustrative examples are pro- vided in order to show the effectiveness of the proposed method.

关键词： Parametric modelling Free-form surface Solid model Drawing

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Adverse events related to colonoscopy: Global trends and future challenges

引用

World Journal of Gastroenterology 2019年第2期25卷 190-204页

作者： Su Young kim Hyun-soo kim Hong jun Park Department of Internal Medicine Yonsei University Wonju College of Medicine

Colonoscopy is a widely used method for diagnosing and treating colonic disease. The number of colonoscopies is increasing worldwide, and concerns about associated adverse events are growing. Large-scale studies using big data for post-colonoscopy complications have been reported. A colon perforation is a severe complication with a relatively high mortality rate. The perforation rate, as reported in large studies(≥ 50,000 colonoscopies) published since 2000, ranges from 0.005-0.085%. The trend in the overall perforation rate in the past 15 years has not changed significantly. Bleeding is a more common adverse event than perforation. Recent large studies(≥ 50,000 colonoscopies) have reported postcolonoscopy bleeding occurring in 0.001-0.687% of cases. Most studies about adverse events related to colonoscopy were performed in the West, and relatively few studies have been conducted in the East. The incidence of post-colonoscopy complications increases in elderly patients or patients with inflammatory bowel diseases. It is important to use a unified definition and refined data to overcome the limitations of previous studies. In addition, a structured training program for endoscopists and a systematic national management program are needed to reduce post-colonoscopy complications. In this review, we discuss the current trends in colonoscopy related to adverse events, as well as the challenges to be addressed through future research.

关键词： Colonoscopy Adverse events Perforation Bleeding Post-colonoscopy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Analytic Feynman Integrals of Functionals in a Banach Algebra Involving the First Variation

引用

Chinese Annals of Mathematics,Series B 2016年第2期37卷 281-290页

作者： Hyun soo CHUNG Vu kim TUAN Seung jun CHANG Department of Mathematics Dankook University Department of Mathematics University of West Georgia

This paper deals with the analytic Feynman integral of functionals on a Wiener space. First the authors establish the existence of the analytic Feynman integrals of functionals in a Banach algebra S_α. The authors then obtain a formula for the first variation of integrals. Finally, various analytic Feynman integration formulas involving the first variation are established.

关键词： Analytic Feynman integral Banach algebra First variation Cameron-Storvick theorem Wiener space

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of Microstructure of Aluminum Substrate on Ordered Nanopore Arrays in Anodic Alumina

引用

Journal of Materials Science & Technology 2015年第7期31卷 751-758页

作者： Choong-soo Chi Jong-Ho Lee Insoo kim Han-jun Oh School of Advanced Materials Engineering Kookmin University Department of Chemistry Hanseo University Advanced Materials Science and Engineering Kumoh National Institute of Technology Department of Materials Science Hanseo University

The effects of microstructure of aluminum substrate on regular nanopore arrangement in anodic alumina layer were investigated. The dissimilar microstructure and texture on aluminum sheets were prepared by various cold rollings and heat treatments, and anodic alumina nanoporous layers were fabricated by two step anodizing method at 40 V in oxalic acid solution. For the aluminum sheets with similar surface texture and annealing condition except purity, the regularity of the nanopore arrangement on the anodic alumina layer increased with purity of aluminum substrate. The difference of surface texture on AI sheets is not critical parameter for formation of ordered nanopore array compared with purity and heat treatment of substrate aluminum. The investigation suggested that the purity and reasonable annealing temperature of aluminum substrate are very important process to obtain the highly-ordered nanopore array on anodic alumina layer.

关键词： AnodizationNanoporous structureTextureAluminum alloy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructural characteristics and low-cycle fatigue properties of AZ91 and AZ91-Ca-Y alloys extruded at different temperatures

引用

Journal of Magnesium and Alloys 2023年第3期11卷 892-902页

作者： Ye Jin kim Young Min kim jun Ho Bae soo-Hyun Joo Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea Department of Materials Science and Engineering Dankook UniversityCheonan 31116Republic of Korea

The commercial AZ91 alloy and nonflammable SEN9(AZ91-0.3Ca-0.2Y,wt%)alloy are extruded at 300°C and 400°*** microstructure,tensile and compressive properties,and low-cycle fatigue(LCF)properties are investigated,with particular focus on the influence of the extrusion *** the AZ91 and SEN9 materials extruded at 300°C(300-materials),numerous fine Mg_(17)Al_(12)particles are inhomogeneously distributed owing to localized dynamic precipitation during extrusion,unlike those extruded at 400°C(400-materials).These fine particles suppress the coarsening of recrystallized grains,decreasing the average grain size of *** the four extruded materials have considerably different microstructures,the difference in their tensile yield strengths is insignificant because strong grain-boundary hardening and precipitation hardening effects in 300-materials are offset almost completely by a strong texture hardening effect in ***,owing to their finer grains and weaker texture,300-materials have higher compressive yield strengths *** the LCF tests,{10-12}twinning is activated at lower stresses in 400-materials than in *** the fatigue damage accumulated per cycle is smaller in 400-materials,they have longer fatigue lives than those of 300-materials.A fatigue life prediction model for the investigated materials is established on the basis of the relationship between the total strain energy density(ΔW_(t))and the number of cycles to fatigue failure(N_(f)),and it is expressed through a simple equation(ΔW_(t)=10·N_(f)-0.59).This model enables fatigue life prediction of both the investigated alloys regardless of the extrusion temperature and strain amplitude.

关键词： AZ91-Ca-Y Extrusion temperature Microstructure Low-cycle fatigue Fatigue life prediction model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Controlling a lithium surface with an alkyl halide nucleophile exchange

引用

Journal of Energy Chemistry 2021年第11期30卷 617-626,I0015页

作者： jung-Hun Lee Thuy Hoai Linh Vuong soo Min Hwang Jae-Hun kim Young-jun kim SKKU Advanced Institute of Nanotechnology(SAINT) Sungkyunkwan UniversitySuwon 16419Republic of Korea Department of Nano Engineering Sungkyunkwan UniversitySuwon 16419Republic of Korea School of Materials Science and Engineering Kookmin UniversitySeoul 02707Republic of Korea

Despite its high theoretical energy density, lithium metal faces huge challenges in its implementation as an anode for Li secondary batteries because of its uncontrollable dendritic growth and large volume change during plating/stripping processes. These geometric changes cause degradation in a cell’s cycle life and performance and can lead to short-circuits and explosions. Here, we report a new approach to producing a LiF-rich phase on the lithium anode surface by employing a “bi-phase” separator. We fabricated it by coating polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) onto a cellulose separator. The coverage of coating was adjusted by varying its concentration in the coating solution. The combination of cellulose and PVDF-HFP produced a LiF-rich solid-electrolyte interphase layer on the Li metal surface via an alkyl halide nucleophile exchange in contact with the bi-phase separator during plating. Symmetric cell tests show that the bi-phase separator extends the cycle life by more than 300 h, with overpotentials of less than 100 mV under plating/stripping at 2 mA cm^(−2) for a capacity of 2 mAh cm^(−2). The formation mechanism of the LiF-rich phase is suggested from spectroscopic analyses.

关键词： Li metal anode PVDF-HFP Cellulose LiF Phase inversion

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Virtual Reality-Based Random Dot Kinematogram

引用

Computers, Materials & Continua 2021年第9期68卷 4205-4213页

作者： jun Ma Hyo-jung kim Ji-soo kim Eek-Sung Lee Min Hong Department of Software Convergence Soonchunhyang UniversityAsan31538Korea Research Administration Team Seoul National University Bundang HospitalSeongnam13620Korea Dizziness Center Clinical Neuroscience CenterDepartment of NeurologySeoul National University Bundang HospitalSeongnam13620Korea Department of Neurology Seoul National University College of MedicineSeoul03080Korea Department of Neurology College of MedicineSoonchunhyang UniversityBucheon14584Korea Department of Computer Software Engineering Soonchunhyang UniversityAsan31538Korea

This research implements a random dot kinematogram(RDK)using virtual reality(VR)and analyzes the results based on normal *** motion perception is one of visual functions localized to a specific cortical area,the human motion perception area(human analogue for the middle temporal/middle superior temporal area)located in the parieto–occipito–temporal junction of the human *** RDK measures visual motion perception *** stimuli in conventional RDK methods are presented using a monitor screen,so these devices require a spacious dark room for installation and ***,VR technology has been implemented in different medical *** test method proposed in this study include a VR-based RDK that can independently measure human motion perception abilities without any spatial constraints via a VR head-mounted ***,the VR-based RDK was implemented,and the visual perception abilities of the normal subjects were measured based on varying *** both screen-and VR-based RDK tests,the easier the stimulus is,the higher the correct answer rate and the shorter the reaction *** significant differences in coherence thresholds were observed between the two test *** VRbased RDK proposed in this study can be used as a diagnosis tool for visual motion perception and neurodegenerative disorders affecting the posterior region of the brain.

关键词： Random dot kinematogram virtual reality visual psychophysics diagnostic device

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Surface plasmon enhancement of photoluminescence in photo-chemically synthesized graphene quantum dot and Au nanosphere

引用

Nano Research 2016年第6期9卷 1866-1875页

作者： Byeongho Park Sun jun kim Ji soo Sohn Min Sik Nam Shinill Kang Seong Chan jun School of Mechanical Engineering Yonsei University 50 Yonsei-ro Seodaemun-gu Seou1120-749 Republic of Korea

Graphene quantum dots （GQDs） are promising candidates for potential applications such as novel optoelectronic devices and bio-imaging. However, insufficient light absorption to exhibit their intriguing characteristics. The strong confinement of light caused by the Au nanoparticles as an antenna can considerably boost the light absorption. With the assistance of ultraviolet irradiation, we prepared bluish-green luminescent nanospheres by the hybridiza- tion of GQD and Au nanoparticles （GQD/Au）. These nanospheres showed a photoluminescence quantum yield of up to 26.9%. The GQD/Au nanospheres were synthesized using a solution of GQDs and HAuC14 by a photochemical method with the reduction of GQDs and the formation of metallic Au. The GQDs and Au nanopartides self-assembled and aggregated into nanospheres via aurophilicity and hydrogen bonding interactions. The average size of the GQD/Au nanospheres was found to be in the range of 150-170 nm, which is much larger than that of the pristine GQDs （4-7 nm）. The GQD/Au nanospheres exhibited an absorption band at 541 nm, which indicates the presence of Au in the nanospheres. The typical absorbance features of GQDs were observed near 236 and 303 nrn. The photoluminescence characteristics were investigated using the excitation and emission spectra. The GQD/Au nanospheres exhibited two emission peaks at 468 and 529 nm in the visible range. The green fluorescent peak located at 529 nm was newly generated by the hybridization. The GQD/Au nanospheres showed an emission efficiency which was two times more than that of the intrinsic GQDs. The reason for this increase was the surface plasmon resonance from the Au particles, which improved the fluorescence property of the resulting nanospheres. These nanospheres can be perceived as outstanding candidates for applications such as displays, optoelectronic devices, and imaging of the biological samples with high emission intensity.

关键词： graphene quantum dot gold nanosphere photoluminescence UV irradiation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：