检索结果-南通市图书馆

Fabrication of 3D Printed PCL/PEG Polyblend Scaffold Using Rapid Prototyping System for Bone Tissue Engineering Application

引用

Journal of Bionic Engineering 2018年第3期15卷 435-442页

作者： Su A Park Sang Jin lee Ji Min Seok jun hee lee Wan Doo Kim Il Keun Kwon Department of Nature-Inspired Nanoconvergence Systems Korea Institute of Machinery and Materials 156 Gajeongbuk-ro Yuseong-gu Daejeon 34103 Republic of Korea Department of Dental Materials School of Dentistry Kyung Hee University 26 Kyungheedae-ro Dongdaemun-gu Seou102447 Republic of Korea

Three-dimensional （3D） printing is a novel process used to manufacture bone tissue engineered scaffolds. This process allows for easy control of the architecture at the micro structure. However, the scaffold properties are typically limited in terms of cellular activity at the scaffold surface due to the printed materials properties. In this study, we developed a polycaprolactone （PCL） blended with polyethylene glycol （PEG） 3D printed scaffold using a rapid prototyping system. The manufactured scaffolds were then washed out to form small pores on the surface in order to improve the scaffolds hydrophilicity. We analyzed the resultant material by using Scanning Electron Microscopy （SEM）, water absorption, water contact angle, in vitro WST-1, and the Bradford assay. Additionally, cells incubated on the fabricated scaffolds were visualized by Confocal Laser Scanning Microscopy （CLSM）. The developed scaffolds exhibited small pores on the strand surface which served to increase hydrophilicity as well as improve cellular proliferation and increase total protein content. Our findings suggest that the presence of small pores on the scaffolds can be used as an effective tool for improving implant cellular interaction. This research indicates that these modified scaffolds can be considered useful for bone tissue engineering applications to improve human health.

关键词： polycaprolactone polyethylene glycol polyblend 3D printing porosity bone tissue engineering

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Adaptive immunity of materials: Implications for tissue healing and regeneration

引用

Bioactive Materials 2024年第11期41卷 499-522页

作者： jung-Hwan lee Seong-Jin Shin jun hee lee Jonathan CKnowles Hae-Hyoung lee Hae-Won Kim Institute of Tissue Regeneration Engineering(ITREN) Dankook UniversityCheonan 31116Republic of Korea Department of Biomaterials Science College of DentistryDankook UniversityCheonan 31116Republic of Korea Department of Nanobiomedical Science and BK21 NBM Global Research Center for Regenerative Medicine Dankook UniversityCheonan 31116Republic of Korea Cell&Matter Institute Dankook UniversityCheonan 31116Republic of Korea Mechanobiology Dental Medicine Research Center Dankook UniversityCheonan 31116Republic of Korea UCL Eastman-Korea Dental Medicine Innovation Centre Dankook UniversityCheonan 31116Republic of Korea UCL Eastman Dental Institute University College LondonLondon NW32PXUnited Kingdom

Recent cumulative findings signify the adaptive immunity of materials as a key agenda in tissue healing that can improve regenerative events and outcomes. Modulating immune responses, mainly the recruitment and functions of T and B cells and their further interplay with innate immune cells (e.g., dendritic cells, macrophages) can be orchestrated by materials. For instance, decellularized matrices have been shown to promote muscle healing by inducing T helper 2 (Th2) cell immunity, while synthetic biopolymers exhibit differential effects on B cell responses and fibrosis compared decellularized matrices. We discuss the recent findings on how implantable materials instruct the adaptive immune events and the subsequent tissue healing process. In particular, we dissect the materials’ physicochemical properties (shape, size, topology, degradation, rigidity, and matrix dynamic mechanics) to demonstrate the relations of these parameters with the adaptive immune responses in vitro and the underlying biological mechanisms. Furthermore, we present evidence of recent in vivo phenomena, including tissue healing, cancer progression, and fibrosis, wherein biomaterials potentially shape adaptive immune cell functions and in vivo outcomes. Our discussion will help understand the materials-regulated immunology events more deeply, and offer the design rationale of materials with tunable matrix properties for accelerated tissue repair and regeneration.

关键词： Adaptive immunity Materials interactions Tissue healing Physicochemical properties Immune cell interplay

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Enhanced efficiency in lead-free bismuth iodide with post treatment based on a hole-conductor-free perovskite solar cell

引用

Nano Research 2018年第12期11卷 6283-6293页

作者： Jongmoon Shin Maengsuk Kim Sujeong jung Chang Su Kim Jucheol Park Aeran Song Kwun-Bum Chung Sung-Ho Jin jun hee lee Myungkwan Song Surface Technology Division Korea Institute of Materials Science (K/MS)797ChangwondaeroSungsan-GuChangwonGyeongnam642-83IRepublic of Korea School of Energy and Chemical Engineering Ulsan Nationallnstitute ofSdence &Technology(UNIST)Ulsan44919Republic of Korea Structure Analysis Group Gyeongbuk Science &Technology Promotion CenterFuture Strategy Research Institute17Cheomdangieop 1-roSangdong-myeonGumiGyeongbuk39171Republic of Korea Division of Physics andSemiconductorScience Dongguk UniversitySeou1100-715Repubfic of Korea Department of Chemistry Education Graduate Department of Chemical Materialsand Institute for Plastic Information and Energy MaterialsPusan National UniversityBusan 46241Republicof Korea

Despite the excellent merits of lead perovskite solar cells, their instability and toxicity still present a bottleneck for practical applications. Bismuth perovskite has emerged as a candidate for photovoltaic (PV) applications, because it not only has a low toxicity but is also stable in air. However, the power conversion efficiency (PCE) remains an unsolved problem. We performed band gap tuning experiments to improve the efficiency. The absorption of ABi3I10 structure films was extended within the visible region, and the optical band gap was decreased considerably compared to that for Cs3Bi2I9. Furthermore, we explained the correlation between the structure and the optical properties via a first-principles study. A device employing CsBi3I10 as a photoactive layer exhibits a PCE of 1.51% and an excellent ambient stability over 30 days.

关键词： solar cells perovskite band-gap engineering bismuth halide lead free

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Changes in smoking behavior and adherence to preventive guidelines among smokers after a heart attack

引用

Journal of Geriatric Cardiology 2013年第2期10卷 146-150页

作者： Yoon-jung Choi Jong-Seon Park Ung Kim Sang-hee lee Jang-Won Son Dong-Gu Shin Young-Jo Kim Myung-Ho Jeong Young-Keun Ahn Myeong-Chan Cho Jang-Whan Bae Chong-Jin Kim Jin-Man Cho Kyoo-Rok Han jun-hee lee Divison of Cardiology Department of Internal Medicine Yeungnam University Hospital 170 Hyeonchung-ro Nam-gu Daegu 705-717 South Korea Division of Cardiology Department of Internal Medicine Chonnam National University Hospital 42 Jebong-ro Dong-gu Kwangju 501-757 South Korea Divison of Cardiology Department of Internal Medicine Chungbuk National University Hospital 410 Sungbong-ro Heungdeok-gu Cheongju Chungcheongbuk-do 361-711 South Korea Division of Cardiology Department of Internal Medicine Kyunghee University Hospital 892 Dongnam-ro Gandong-gu Seoul 134-727 South Korea Division of Cardiology Department of Internal Medicine Hanrim University Hospital 94-195 Yeongdeungpo-dong Yeongdeungpo-gu Seoul 150-030 South Korea

Objective Risk factor modification is key to preventing subsequent cardiac events after a heart attack. This study was designed to investigate the disparity between preventive guidelines and clinical practice among smoking patients. Methods The study was carried out in smokers admitted with myocardial infarction (MI). Atotal of 275 patients who had been regularly followed for over one year after MI were randomly selected and enrolled in this *** investigated changes in smoking behavior and the adherence rate to ACC/AHA Guidelines for secondary prevention in patients with coronary artery disease at the time of, and one year after, the index event. Results The study population consisted of 275 patients (97.1% males) with a mean age of 57.0 ±11.2 years. Achievement of target goals at one year was as follows: smoking cessation, 52.3%; blood pressure, 83.9%; HbA1c, 32.7%; lipid profile, 65.5%; and body mass index (BMI), 50.6%. Over one year, 80% of the patients attempted to quit smoking; 27% of them re-started smoking within one month after discharge while 65% succeeded in cessation of smoking. At one year, only 52% of the patients overall had stopped smoking. From the multivariate logistic analysis including smoking patterns and clinical characteristics, the severity of coronary artery disease was the only independent predictor for smoking cessation (Relative risk (RR): 1.230; P = 0.022). Conclusions Only a small percentage of MI patients adhere to guidelines for secondary prevention and a sizable proportion fail to stop smoking. These findings underscore the need for an effective patient education system.

关键词： Coronary artery disease Myocardial infarction Prevention Smoking

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Aligned Ion Conduction Pathway of Polyrotaxane‑Based Electrolyte with Dispersed Hydrophobic Chains for Solid‑State Lithium–Oxygen Batteries

引用

Nano-Micro Letters 2025年第2期17卷 169-186页

作者： Bitgaram Kim Myeong‑Chang Sung Gwang‑hee lee Byoungjoon Hwang Sojung Seo Ji‑Hun Seo Dong‑Wan Kim Department of Materials Science and Engineering Korea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea School of Civil Environmental and Architectural EngineeringKorea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea Materials Science and Chemical Engineering Center Institute for Advanced Engineering(IAE)Yongin 17180Republic of Korea

A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety *** study addresses these problems by proposing a modified polyrotaxane(mPR)-based solid polymer electrolyte(SPE)design that simultaneously mitigates solvent-related problems and improves ***-SPE exhibits high ion conductivity(2.8×10^(−3)S cm^(−1)at 25℃)through aligned ion conduction pathways and provides electrode protection ability through hydrophobic chain *** this mPR-SPE into solid-state LOBs resulted in stable potentials over 300 *** situ Raman spectroscopy reveals the presence of an LiO_(2)intermediate alongside Li_(2)O_(2)during oxygen *** situ X-ray diffraction confirm the ability of the SPE to hinder the permeation of oxygen and moisture,as demonstrated by the air permeability *** present study suggests that maintaining a low residual solvent while achieving high ionic conductivity is crucial for restricting the sub-reactions of solid-state LOBs.

关键词： Solid polymer electrolyte Lithium-oxygen batteries Polyrotaxane ion conductivity Hydrophobic chain

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Expression rates of p16,p53 in head and neck cutaneous squamous cell carcinoma based on human-papillomavirus positivity

引用

World Journal of Clinical Cases 2025年第9期13卷 13-23页

作者： Ha-Jong Nam Heongrae Ryu Da-Woon lee Je Yeon Byeon jun Hyuk Kim Ji Hye lee Soomin Lim Hwan jun Choi Department of Plastic and Reconstructive Surgery Soonchunhyang University Gumi HospitalGumi-si 39371South Korea Department of Plastic and Reconstructive Surgery College of MedicineSoonchunhyang UniversityCheonan-si 31151South Korea Department of Pathology Soonchunhyang University HospitalCheonan-si 31151South Korea Bachelor of Medicine and Bachelor of Surgery University College LondonMedical SchoolLondon WC1E 6DEUnited Kingdom

BACKGROUND The high prevalence of human papillomavirus(HPV)infection in oropharyngeal squamous cell carcinoma(SCC)is well established,and p16 expression is a strong ***-related tumors exhibit unique mechanisms that target p16 and p53 ***,research on HPV prevalence and the combined predictive value of p16 and p53 expression in head and neck cutaneous SCC(HNCSCC),particularly in Asian populations,remains *** retrospective study surveyed 62 patients with HNSCC(2011-2020),excluding those with facial warts or other skin *** To explore the prevalence of HPV and the predictive value of p16 and p53 expression in HNCSCC in Asian *** All patients underwent wide excision and *** staining for HPV,p16,and p53 yielded positive and negative *** relevance of each marker was investigated by categorizing the tumor locations into high-risk and middle-risk zones based on recurrence *** Of the 62 patients,20(32.26%)were male,with an average age of 82.27 years(range 26-103 years).High-risk included 19 cases(30.65%),with the eyelid and lip being the most common sites(five cases,8.06%).Middle-risk included 43 cases(69.35%),with the cheek being the most common(29 cases,46.77%).The p16 expression was detected in 24 patients(38.71%),p53 expression in 42 patients(72.58%),and HPV in five patients(8.06%).No significant association was found between p16 expression and the presence of HPV(P>0.99),with a positive predictive value of 8.33%.CONCLUSION This study revealed that p16,a surrogate HPV marker in oropharyngeal SCC,is not reliable in HNCSCC,providing valuable insights for further research in Asian populations.

关键词： Squamous cell carcinoma Oropharyngeal Non-oropharyngeal Human papillomavirus The p16 The p53

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of stick-slip on magneto-rheological elastomer with a magnetic field

引用

Friction 2017年第4期5卷 383-391页

作者： Chenglong LIAN Kwang-hee lee jun-wook AN Chul-hee lee Department of Mechanical Engineering Inha University100 InharoNam-guIncheon 22212Republic of Korea Department of Construction Machinery Engineering Inha University100 InharoNam-guIncheon 22212Republic of Korea

This study investigated the stick-slip characteristics of a magneto-rheological elastomer (MRE) against an aluminum ***,the MRE was manufactured,and a stick-slip tester was employed to evaluate the stick-slip performance of the MRE under different velocities and load conditions with and without a magnetic *** fast Fourier transform (FFT) of the friction force of the stick-slip and the roughness of the aluminum plate surface were calculated to confirm the stick-slip *** the tests,the wear surfaces were observed to evaluate the wear properties of the MRE regarding the *** showed that the stick-slip was smaller at lower *** higher velocity,the reduction of the stick-slip under a magnetic field was more clearly ***,the wear reduced with reduced stick-slip under a magnetic field.

关键词： stick-slip friction wear magneto-rheological elastomer

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Friction Behavior of Magnetorheological Fluids with Different Material Types and Magnetic Field Strength

引用

Chinese Journal of Mechanical Engineering 2016年第1期29卷 84-90页

作者： ZHANG Peng lee Kwang-hee lee Chul-hee Department of Mechanical Engineering Inha University

Magnetorheological （MR） fluid is a type of a smart material that can control its mechanical properties under a magnetic field. Iron particles in MR fluid form chain structures in the direction of an applied magnetic field, which is known as MR effect, resulting in variation of stiffness, shear modulus, damping and tribological characteristics of MR fluid. As MR effect depends on the density of particles in the fluid or the strength of a magnetic field, the experiments are conducted to evaluate the friction property under reciprocating motion by changing the types of MR fluid and the strength of a magnetic field. The material of aluminum, brass, and steel are chosen for specimen as they are the most common material in mechanical applications. The surfaces of specimen are also observed by optical microscope before and after experiments to compare the surfaces with test conditions. The comparing results show that the friction coefficient increases as the strength of a magnetic field increases in regardless of types of MR fluid or the material. Also the density of particle in MR fluid affects the friction characteristic. The results from this research can be used to improve the performance of mechanical applications using MR fluid.

关键词： Magnetorheological (MR) fluid friction characteristics smart material magnetic field

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

2D material inorganic liquid crystals for tunable deep UV light modulation

引用

National Science Review 2022年第12期9卷 62-63页

作者： Young hee lee Department of Energy Science and Department of Physics Sungkyunkwan University IBS Center for Integrated Nanostructure Physics Institute for Basic Science Sungkyunkwan University

Modulation of light refers to the modulation of electromagnetic radiation in the optical region including visible light as well as ultraviolet and infrared radiation,in which the amplitude (and therefore the intensity),phase,frequency or polarization of the radiated oscillations can be changed [1].Optical modulator devices are widely used in industry,as represented by liquid crystal optical modulators having an annual global market worth of over US$100 ***,

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Friction and wear of textured surfaces produced by 3D printing

引用

Science China(Technological Sciences) 2017年第9期60卷 1400-1406页

作者： HONG Yi ZHANG Peng lee Kwang-hee lee Chul-hee Department of Mechanical Engineering Inha University Incheon 402-751 Korea

Surface texture patterns have great potential for improving tribological performance in terms of reducing friction and wear. The most common methods for surface texatring are laser and injection molding. The 3D printing method is also used to build parts, patterns, and molds that feature fine details for a wide range of applications because texture manufacturing by 3D printing is faster, more flexible, and less expensive than traditional techniques. To date, there has been no research on textured surfaces produced by 3D printing. Therefore, a new fabrication method using 3D printing to improve friction and wear properties is a topic worth exploring. In this study, a reciprocating friction tester was used to evaluate the friction and wear properties of different surface textures produced by 3D printing. The surface of specimens was examined by electron microscope and scanning electron microscope before and after the test. The results show that surface texturing can be applied to 3D printed parts to improve their friction and wear performance.

关键词： three-dimensional (3D) printing texture friction wear

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：