检索结果-南通市图书馆

Prominent cycling reversibility and kinetics enabled by CaTiO3 protective layer on Zn metal for aqueous Zn-ion batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 245-258页

作者： Gaeun Lee Yong nam Ahn Seongjoon So Chanwoo Park jong-Seong Bae Taehyun Park Il Tae Kim Jaehyun Hur School of Chemical Biological and Battery Engineering Gachon University Seongnam Busan Center Korea Basic Science Institute

Aqueous Zn-ion batteries （AZIBs） have received considerable attention owing to their various advantages such as safety,low cost,simple battery assembly conditions,and high ionic ***,they still suffer from serious problems,including uncontrollable dendrite growth,corrosion,hydrogen evolution reaction （HER） from water decomposition,electrode passivation,and unexpected *** creation of a uniform artificial nanocrystal layer on the Zn anode surface is a promising strategy for resolving these ***,we propose the use of a perovskite CaTiO3（CTO） protective layer on Zn（CTO@Zn） as a promising approach for improving the performance of *** CTO artificial layer provides an efficient pathway for Zn ion diffusion towards the Zn metal because of the high dielectric constant （εr=180） and ferroelectric characteristics that enable the alignment of dipole moments and redistribute the Zn2+ions in the CTO *** avoiding the direct contact of the Zn anode with the electrolyte solution,the uneven dendrite growth,corrosion,parasitic side reactions,and HER are mitigated,while CTO retains its mechanical and chemical robustness during ***,CTO@Zn demonstrates an improved lifespan in a symmetric cell configuration compared with bare ***@Zn shows steady overpotential （～68 m V） for 1500 h at 1 mA cm-2/0.5 mA h cm-2,excelling bare ***,when paired with the V2O5-C cathode,the CTO@Zn//V2O5-C full battery delivers 148.4 mA h g-1（based on the mass of the cathode） after 300 *** study provides new insights into Zn metal anodes and the development of high-performance AZIBs.

关键词： Artificial layer Dielectric constant Zn metal anode Zinc aqueous battery

A Rapid Adaptation Approach for Dynamic Air‑Writing Recognition Using Wearable Wristbands with Self‑Supervised Contrastive Learning

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 417-431页

作者： Yunjian Guo Kunpeng Li Wei Yue nam‑Young Kim Yang Li Guozhen Shen jong‑Chul Lee Department of Electronic Convergence Engineering Kwangwoon UniversitySeoul 01897South Korea Radio Frequency Integrated Circuit(RFIC)Bio Centre Kwangwoon UniversitySeoul 01897South Korea Department of Electronic Engineering Kwangwoon UniversitySeoul 01897South Korea School of Microelectronics Shandong UniversityJinan 250101People’s Republic of China State Key Laboratory of Integrated Chips and Systems Fudan UniversityShanghai 200433People’s Republic of China School of Integrated Circuits and Electronics Beijing Institute of TechnologyBeijing 100081People’s Republic of China

Wearable wristband systems leverage deep learning to revolutionize hand gesture recognition in daily *** existing approaches that often focus on static gestures and require extensive labeled data,the proposed wearable wristband with selfsupervised contrastive learning excels at dynamic motion tracking and adapts rapidly across multiple *** features a four-channel sensing array composed of an ionic hydrogel with hierarchical microcone structures and ultrathin flexible electrodes,resulting in high-sensitivity capacitance *** wireless transmission from a Wi-Fi module,the proposed algorithm learns latent features from the unlabeled signals of random wrist ***,only few-shot labeled data are sufficient for fine-tuning the model,enabling rapid adaptation to various *** system achieves a high accuracy of 94.9%in different scenarios,including the prediction of eight-direction commands,and air-writing of all numbers and *** proposed method facilitates smooth transitions between multiple tasks without the need for modifying the structure or undergoing extensive task-specific *** utility has been further extended to enhance human–machine interaction over digital platforms,such as game controls,calculators,and three-language login systems,offering users a natural and intuitive way of communication.

关键词： Wearable wristband Self-supervised contrastive learning Dynamic gesture Air-writing Human-machine interaction

Superelastic metastable Ti-Mo-Sn alloys with high elastic admissible strain for potential bio-implant applications

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2023年第32期163卷 45-58页

作者： Shuanglei Li Jae H.Kim Seung Won Kang Jae Ho Kim Tae-hyun nam jong-Taek Yeom Titanium Alloys Department Metal Materials DivisionKorea Institute of Materials Science(KIMS)Changwon 51508Republic of Korea Department of Materials Engineering and Convergence Technology&Research Institute for Green Energy Convergence Technology(RIGET) Gyeongsang National University900 GazwadongJinjuGyeongnam 52828Republic of Korea

The demand for titanium alloys simultaneously having high elastic admissible strain and large recovery strain for bio-implant applications is ***-free Ti-based shape memory alloys are promising candidates for obtaining the required multifunctional *** this study,a wide content range of(0-15)wt%of low-cost,toxicity-free,and high-biocompatible Sn element was added to the Ti-8Mo(wt%)alloy to study its effect on the superelastic recovery and mechanical properties of biomedical Ti-Mo-Sn *** tailoring Sn content,desired multifunctional properties of high elastic admissible strain and room temperature superelasticity were achieved in the studied Ti-Mo-Sn *** was found that the increase in Sn content stabilized theβphase and a singleβphase was obtained at room temperature in Ti-8Mo-(13,15)Sn *** addition of Sn modified the lattice parameters of theα″martensite andβphase and affected the lattice deformation stain ofβ→α″.The lattice deformation strain along the[011]βdirection was found to be decreased by-0.26%/wt%*** room temperature superelasticity with a recovery strain of 3.1%and an elastic admissible strain of 1%was obtained in the Ti-8Mo-13Sn *** Sn content increased to 15 wt%,a high elastic admissible strain of 1.56%and a recovery strain of 2.0%were *** Ti-Mo-Sn alloys with excellent multifunctional properties are promising candidates for bio-implant applications.

关键词： Ti-Mo-Sn alloy Shape memory alloy Elastic admissible strain Elastic modulus Superelasticity

Wire-Shaped 3D-Hybrid Supercapacitors as Substitutes for Batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2020年第2期12卷 211-223页

作者： Kyeong‑nam Kang Ananthakumar Ramadoss Jin‑Wook Min jong‑Chul Yoon Deokjung Lee Seok Ju Kang Ji‑hyun Jang School of Energy and Chemical Engineering Low Dimensional Carbon Materials CenterUlsan National Institute of Science and TechnologyUlsan 44919Republic of Korea Laboratory for Advanced Research in Polymeric Materials Central Institute of Plastic Engineering and TechnologyBhubaneswar 751024India School of Mechanical Aerospace and Nuclear EngineeringUlsan National Institute of Science and TechnologyUlsan 44919Republic of Korea

We report a wire-shaped three-dimensional(3D)-hybrid supercapacitor with high volumetric capacitance and high energy density due to an interconnected 3D-configuration of the electrode allowing for large number of electrochemical active sites,easy access of electrolyte ions,and facile charge transport for flexible wearable *** interconnected and compact electrode delivers a high volumetric capacitance(gravimetric capacitance)of 73 F cm−3(2446 F g−1),excellent rate capability,and cycle *** 3D-nickel cobalt-layered double hydroxide onto 3D-nickel wire(NiCo LDH/3D-Ni)//the 3D-manganese oxide onto 3D-nickel wire(Mn3O4/3D-Ni)hybrid supercapacitor exhibits energy density of 153.3 Wh kg−1 and power density of 8810 W kg−*** red lightemitting diode powered by the as-prepared hybrid supercapacitor can operate for 80 min after being charged for tens of seconds and exhibit excellent electrochemical stability under various deformation *** results verify that such wire-shaped 3D-hybrid supercapacitors are promising alternatives for batteries with long charge–discharge times,for smart wearable and implantable devices.

关键词： Three-dimensional(3D)metal current collector Flexible hybrid supercapacitor Wire-shaped supercapacitor High energy density device Fast charging energy storage system

Si nanomebranes: Material properties and applications

在线全文

学校读者我要写书评

暂无评论

Nano Research 2021年第9期14卷 3010-3032页

作者： Arijit Sarkar Yongjun Lee jong-hyun Ahn School of Electrical and Electronic Engineering Yonsei University50 Yonsei-roSeoul 03722Republic of Korea

Silicon(Si)has widely been used as an essential material in the modern semiconductor ***,new attempts have been actively made to apply Si to a variety of fields such as flexible electronic devices and biosensors by manufacturing Si nanomembranes(NMs)having nanometer *** particular,as the thickness of Si is reduced to a nanometer scale,its mechanical,electrical,and optical properties differ from that of its bulk form,which provides opportunities for the development of new conceptual *** this review,we present recent advances in Si NM technology that exhibit functional features different from the bulk *** addition,we discuss the opportunities and current challenges related to this field.

关键词： Si nanomebranes flexible electronics bio-integrated electronics Si optoelectronics strain engineering

Reliability, Accuracy, and Use Frequency of Evaluation Methods for Amount of Tongue Coating

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Integrative Medicine 2019年第5期25卷 378-385页

作者： Su-Ryun Kim Dong-hyun nam Department of Biofunctional Medicine and Diagnosis College of Korean MedicineSangji UniversityWonju 26339Republic of Korea

Objective: To classify the evaluation methods for amount of tongue coating(TC) and investigate their reliability, accuracy, and frequency of use. Methods: Articles published from 1985 to 2015 were searched for evaluation methods for the amount of TC in PubMed and the Cochrane Library. Only clinical researches were included except protocol articles. The methods were classi?ed according to their characteristics. Results: Finally,113 articles were selected. The evaluation method for the amount of TC from the articles was classi?ed into 4 types: intuitive, specificative, computerized, and weighing TC. The reliability in the intuitive and specificative methods(κ=0.33–0.92) showed varying levels among the studies. In general, the amount of TC calculated by the speci?cative method(Spearman's r=0.68–0.80) was more strongly related to the directly measured value than to the value estimated by the computerized method(Pearson's r=0.442). The number of articles published on this topic has increased consistently, and the speci?cative method was the most frequently used. Despite the higher reliability of the computerized method, it has not been widely used. Conclusions: The high prevalence of the speci?cative method would continue in clinical practice because of its convenience and accuracy. However,to establish higher reliability, the limitation of the subjectivity of the assessors should be overcome through calibration training. In the computerized method, novel algorithms are needed to obtain a higher accuracy so that it can help the practitioners con?dently estimate the amount of TC.

关键词： tongue coating evaluation methods reliability accuracy frequency

Void defect detection in ball grid array X-ray images using a new blob filter

在线全文

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science C(Computers and Electronics) 2012年第11期13卷 840-849页

作者： Shao-hu PENG hyun Do nam Department of Electronics and Electrical Engineering Dankook University

Ball grid arrays (BGAs) have been used in the production of electronic devices/assemblies because of their advantages of small size, high I/O port density, etc. However, BGA voids can degrade the performance of the board and cause failure. In this paper, a novel blob filter is proposed to automatically detect BGA voids presented in X-ray images. The proposed blob filter uses the local image gradient magnitude and thus is not influenced by image brightness, void position, or component interference. Different sized average box filters are employed to analyze the image in multi-scale, and as a result, the proposed blob filter is robust to void size. Experimental results show that the proposed method obtains void detection accuracy of up to 93.47% while maintaining a low false ratio. It outperforms another recent algorithm based on edge detection by 40.69% with respect to the average detection accuracy, and by 16.91% with respect to the average false ratio.

关键词： Ball grid array (BGA) X-ray Defect detection Blob detection Void detection

Synthesis of tin nanoparticles through modified polyol process and effects of centrifuging and drying on nanoparticles

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2012年第S3期22卷 707-711页

作者： Sang-Soo CHEE jong-hyun LEE Department of Materials Science and Engineering Seoul National University of Science and Technology

Sn nanoparticles with average diameter of 13.1 nm were synthesized by modified polyol process,and their melting point was observed to be about 40 °C less than that of bulk *** though Sn nanoparticles are solid and covered with thin PVP capping and oxide layer,Sn nanoparticles in solution agglomerate upon centrifugation,resulting in a melting point *** to stickiness of the PVP capping layer,extensive aggregation between Sn nanoparticles was observed after ***,the aggregation behavior did not further influence the melting point,because actual agglomeration did not occur in the aggregates.

关键词： tin nanoparticle melting point centrifugation agglomeration aggregation

UBP12/UBP13-mediated deubiquitination of salicylic acid receptor NPR3 suppresses plant immunity

在线全文

学校读者我要写书评

暂无评论

Molecular Plant 2023年第1期16卷 232-244页

作者： Yu Zhou Su-hyun Park nam-Hai Chua Temasek Life Sciences Laboratory National University of Singapore1 Research LinkSingapore 117604Singapore Disruptive&Sustainable Technologies for Agricultural Precision Singapore-MIT Alliance for Research and Technology1 CREATE WaySingapore 138602Singapore

Salicylic acid(SA),a defense hormone produced after pathogen challenge,is critical for plant *** NONEXPRESSER OF PR GENES 1(NPR1)and its paralogs NPR3 and NPR4 can bind SA and mediate SA signal ***1 functions as a transcriptional co-activator to promote defense gene expression,whereas NPR3 and NPR4 have been shown to function as negative regulators in the SA signaling *** the mechanism about NPR1 regulation has been well studied,how NPR3/NPR4 proteins are regulated in immune responses remains largely ***,we show that the stability of NPR3/NPR4 is enhanced by *** the absence of pathogen challenge,NPR3/NPR4 are unstable and degraded by the 26S proteasome,whereas the increase in cellular SA levels upon pathogen infection suppresses NPR3/NPR4 *** found that UBP12 and UBP13,two homologous deubiquitinases from a ubiquitin-specific protease subfamily,negatively regulate plant immunity by promoting NPR3/NPR4 *** genetic results further showed that UBP12/UBP13-mediated immunity suppression is partially dependent on NPR3/NPR4 *** interacting with NPR3 in the nucleus in an SA-dependent manner,UBP12 and UBP13 remove ubiquitin from polyubiquitinated NPR3 to protect it from being *** stabilization of NPR3/NPR4 promoted by UBP12/UBP13 is essential for negative regulation of basal and SA-induced immunity.

关键词： plant immunity salicylic acid NPR3 UBP12/UBP13