检索结果-南通市图书馆

Effect of sintering temperature on the physical properties and electrical contact properties of doped AgSnO_2 contact materials

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2018年第11期25卷 1275-1285页

作者： Hai-tao wang Zi-xiang wang Lian-zheng wang jing-qin wang Yan-cai Zhu State Key Laboratory of Reliability and Intelligence of Electrical Equipment School of Electrical EngineeringHebei University of Technology Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province School of Electrical EngineeringHebei University of Technology

AgSnO_ 2 electrical contact materials doped with Bi_2O_3,La_2O_3,and TiO_2 were successfully fabricated by the powder metallurgy method under different initial sintering *** electrical conductivity,density,hardness,and contact resistance of the Ag Sn O_2/Bi_2O_3,AgSnO_2/La_2O_3,and AgSnO_2/Ti O_2 contact materials were measured and *** arc-eroded surface morphologies of the doped AgSnO_2 contact materials were investigated by scanning electron microscopy(SEM).The effects of the initial sintering temperature on the physical properties and electrical contact properties of the doped AgSnO_2 contact materials were *** results indicate that the physical properties can be improved and the contact resistance of the AgSnO_2 contact materials can be substantially reduced when the materials are sintered under their optimal initial sintering temperatures.

关键词： sintering temperature contact materials physical properties electrical contact properties

Influence of ash composition on the sintering behavior during pressurized combustion and gasification process

在线全文

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2012年第3期13卷 230-238页

作者： Ni-jie jing qin-hui wang Yu-kun YANG Le-ming CHENG Zhong-yang LUO Ke-fa CEN State Key Laboratory of Clean Energy Utilization Zhejiang University Hangzhou 310027 China

To determine the ash characteristics during fluidized bed combustion and gasification purposes, the investigation of the impacts of chemical composition of Jincheng coal ash on the sintering temperature was conducted. A series of experiments on the sintering behavior at 0.5 MPa was performed using the pressurized pressure-drop technique in the combustion and gasification atmospheres. Meanwhile, the mineral transformations of sintered ash pellets were observed using X-ray diffractometer （XRD） analyzer to better understand the experimental results. In addition, quantitative XRD and field emission scanning electron microscope/energy dispersive X-ray spectrometer （FE-SEM/EDS） analyses of ash samples were used for clarifying the detailed ash melting mechanism. These results show that the addition of Fe203 can obviously reduce the sintering temperatures under gasification atmospheres, and only affect a little the sintering temperature under combustion atmosphere. This may be due to the presence of iron-bearing minerals, which will react with other ash compositions to produce low-melting-point eutectics. The FE-SEM/EDS analyses of ash samples with Fe203 additive show consistent results with the XRD measurements. The CaO and Na20 can reduce the sintering temperatures under both the combustion and gasification atmospheres. This can be also contributed to the formation of low-melting-point eutectics, decreasing the sintering temperature. Moreover, the fluxing minerals, such as magnetite, anhydrite, muscovite, albite and nepheline, contribute mostly to the reduction of the sintering temperature while the feldspar minerals, such as anorthite, gehlenite and sanidine, can react with other minerals to produce low-melting-point eutectics, and thereby reduce the sintering temperatures.

关键词： Ash composition Sintering temperature X-ray diffractometer (XRD) Field emission scanning electron microscope/energy dispersive X-ray spectrometer (FE-SEM/EDS)

Oscillation of S5 helix under different temperatures in determination of the open probability of TRPV1 channel

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2020年第9期29卷 574-580页

作者： Tie Li Jun-Wei Li Chun-Li Pang Hailong An Yi-Zhao Geng jing-qin wang State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of TechnologyTianjin 300130China Institute of Biophysics Hebei University of TechnologyTianjin 300401China

Transient receptor potential vanilloid subtype 1 (TRPV1) is a polymodel sensory receptor and can be activated by moderate temperature (≥ 43 ℃). Though extensive researches on the heat-activation mechanism revealed some key elements that participate in the heat-sensation pathway, the detailed thermal-gating mechanism of TRPV1 is still unclear. We investigate the heat-activation process of TRPV1 channel using the molecular dynamics simulation method at different temperatures. It is found that the favored state of the supposed upper gate of TRPV1 cannot form constriction to ion permeation. Oscillation of S5 helix originated from thermal fluctuation and forming/breaking of two key hydrogen bonds can transmit to S6 helix through the hydrophobic contact between S5 and S6 helix. We propose that this is the pathway from heat sensor of TRPV1 to the opening of the lower gate. The heat-activation mechanism of TRPV1 presented in this work can help further functional study of TRPV1 channel.

关键词： TRPV1 heat-activation mechanism molecular dynamics simulation hydrogen bond gating

Study on Biosorption of Uranium by Rhodotorula Glutinis

在线全文

学校读者我要写书评

暂无评论

近代物理研究所和兰州重离子加速器实验室年报：英文版 2007年第1期 57-58页

作者： Bai jing qin Zhi wang Jufang

Prospects on mangrove knowledge services in the smart era: From plant atlas to knowledge graphs

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Earth Sciences 2025年第1期68卷 111-127页

作者： Zhi-Wei HOU Wenlong jing Cheng-Zhi qin Ji YANG qing XIA Xiaoling YIN Key Laboratory of Guangdong for Utilization of Remote Sensing and Geographical Information System Guangdong Open Laboratory of Geospatial Information Technology and Application Guangzhou Institute of Geography Guangdong Academy of Sciences Southern Marine Science and Engineering Guangdong Laboratory (Guangzhou) State Key Laboratory of Resources and Environmental Information System Institute of Geographic Sciences and Natural Resources ResearchChinese Academy of Sciences College of Resources and Environment University of Chinese Academy of Sciences School of Traffic & Transportation Engineering Changsha University of Science and Technology

Mangroves are crucial to the ecological security of the Earth and human well-being. Their management, conservation, and restoration are of great importance and necessitate the support of spatio-temporal information and multidisciplinary knowledge such as biology and ecology. Traditional knowledge services such as plant atlas provide illustrated textual knowledge of mangroves. However, this kind of service is oriented to information retrieval and is incapable of effectively mining and utilizing fragmented knowledge from multi-source heterogeneous data, facing the problem of “massive data, rare knowledge”. Knowledge graphs are capable of extracting, organizing, and fusing the knowledge contained in massive data into semantic networks that can be understood and computed by computers. They provide a solution for the realization of intelligent knowledge services. Focusing on the urgent need for mangrove knowledge acquisition, formal representation, and intelligent services, this paper proposes a research prospect on mangrove knowledge graphs and knowledge services. We first analyze the similarities and differences between various domain-specific concepts of Tupu. On this basis, we define the mangrove knowledge graph as a large-scale knowledge base that integrates multi-disciplinary knowledge and spatio-temporal information with mangrove ecosystems as the core. Then, we propose a research framework for mangrove knowledge services that can realize the transformation from multi-modal data to intelligent knowledge services, including multiple research levels such as ubiquitous data sensing and aggregation, knowledge organization and graph construction, and intelligent mangrove knowledge services. Subsequently, the methods and workflow for constructing mangrove knowledge graphs are introduced. Finally, we discuss the challenges and possible future directions of mangrove knowledge services in the smart era, including the construction of a mangrove knowledge system that integra

关键词： Mangrove Tupu Knowledge graph Multi-modal Knowledge service

An efficient quantum proactive incremental learning algorithm

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2025年第1期Mechanics & Astronomy) .卷 49-57页

作者： Lingxiao Li jing Li Yanqi Song Sujuan qin Qiaoyan Wen Fei Gao State Key Laboratory of Networking and Switching Technology Beijing University of Posts and Telecommunications School of Cyberspace Security Beijing University of Posts and Telecommunications

In scenarios where a large amount of data needs to be learned, incremental learning can make full use of old knowledge, significantly reduce the computational cost of the overall learning process, and maintain high performance. In this paper, taking the MaxCut problem as our example, we introduce the idea of incremental learning into quantum computing, and propose a Quantum Proactive Incremental Learning algorithm(QPIL). Instead of a one-off training of quantum circuit, QPIL contains a multi-phase training on gradually-increased subgraphs of all vertices, proactively reducing large-scale problems to smaller ones to solve in steps, providing an efficient solution for MaxCut. Specifically, some vertices and corresponding edges are randomly selected for training to obtain optimized parameters of the quantum circuit at first. Then, in each incremental phase, the remaining vertices and corresponding edges are gradually added and the parameters obtained from the previous phase are reused in the parameter initialization of the current phase. We perform experiments on 120 different small-scale graphs, and it shows that QPIL performs superior to prevalent quantum and classical baselines in terms of approximation ratio(AR), time cost, anti-forgetting, and solving stability. In particular, QPIL's AR surpasses 20% of mainstream quantum baselines, and the time cost is less than 1/5 of them. The idea of QPIL is expected to inspire efficient and high-quality solutions in large-scale Max Cut and other combinatorial optimization problems.

关键词： variational quantum algorithm incremental learning multi-phase training MaxCut quantum computing

Bifunctional bridging capping layer enables 24.5% efficiency of perovskite solar cells with polymer-based hole transport materials

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第1期68卷 350-359页

作者： Can Zhu Yiyang wang Lei Meng Beibei Qiu jing Li Shucheng qin Ke Hu Xin Jiang Wenbin Lai Minchao Liu Zhe Liu Chenxing Lu Jinyuan Zhang Yongfang Li Beijing National Laboratory for Molecular Sciences CAS Key Laboratory of Organic Solids Institute of Chemistry Chinese Academy of Sciences School of Chemical Science University of Chinese Academy of Sciences Key Laboratory of Solid State Optoelectronic Devices of Zhejiang Province College of Physics and Electronic Information Engineering Zhejiang Normal University Key Laboratory of Photochemical Conversion and Optoelectronic Materials Technical Institute of Physics and ChemistryChinese Academy of Sciences Laboratory of Advanced Optoelectronic Materials College of Chemistry Chemical Engineering and Materials ScienceSoochow University

Developing a bridge capping layer between perovskite and hole transport layer materials（HTMs） in the n-i-p perovskite solar cells（pero-SCs） is an effective approach to modify the morphology of HTMs and passivate the perovskite ***, we select the quinoxaline-based bifunctional passivation agent, quinoxalin-6-yl-methylamine hydrochloride（Qx MACl）,as the bridging layer, and a D-A copolymer PBQ12 containing the same quinoxaline unit as an HTM for the n-i-p pero-SCs. Due to the π-π stacking among the common quinoxaline units in the bridge layer and HTM, Qx MACl induces the π-π stacking of the PBQ12 film and improves the film morphology of HTMs with better conductivity. Additionally, Qx MACl can effectively passivate the perovskite surface, and PBQ12 possesses appropriate energy levels and high hole mobility. The pero-SCs based on FAPbI3with PBQ12/Qx MACl treatment showed a higher power conversion efficiency（PCE） of 24.05% and outstanding stability, maintaining 95.4% and 92.1% of its initial PCE after 750 h of storage and after over 800 h of thermal annealing at 85 °C, respectively. To further enhance the PCE of the PBQ12/Qx MACl-based devices, we developed a non-metal ion dopant for the PBQ12 HTM. Through trace doping of PBQ12 HTM by the non-metal ion dopant, the PCE of the PBQ12/Qx MACl-based devices reached 25.24%（the calibrated PCE of 24.55% by the National Institute of Metrology, China）.

关键词： D-A copolymer, hole transport materials, bifunctional bridge capping layer, passivation perovskite solar cells

Nano high-entropy oxide cathode with enhanced stability for direct borohydride fuel cells

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 309-316页

作者： Lei Zhang Lingfeng Kuang Lianke Zhang Wen Chu Haiying qin jing Zhang Junjing He Hualiang Ni Hongzhong Chi New Energy Materials Research Center College of Materials and Environmental Engineering Hangzhou Dianzi University School of Materials Science and Engineering Zhejiang University Key Laboratory of MEMS of Ministry of Education School of Integrated Circuits Southeast University

High-entropy materials have become high-activity electrocatalysis owing to their high-entropy effect and multiple active ***,we synthesize a series of carbon-supported nano high-entropy oxides（HEOs/C）,specifically （PtFeCoNiCu）O/C,using a carbothermal shock （CTS） method for application as a cathode catalyst in direct borohydride fuel cells （DBFCs）.The microstructure of the prepared catalysts was characterized by X-ray photoelectron spectroscopy,X-ray absorption fine structure,and transmission electron *** prepared （PtFeCoNiCu）O/C,with particle sizes ranging from 2 to 4 nm,demonstrates 3.94 transferred electrons towards the oxygen reduction reaction in an alkaline environment,resulting in a minimal H2O2yield of 2.6%.Additionally,it exhibits a Tafel slope of 61 mV dec-1,surpassing that of commercial Pt/C (82 mV dec-1).Furthermore,after 40,000 cycles of cyclic voltammetry（CV） testing,the half-wave potential of （PtFeCoNiCu）O/C shows a positive shift of 3 mV,with no notable decline in the limiting current *** （PtFeCoNiCu）O/C is used as a cathode catalyst in DBFCs,the DBFC achieves a maximum power density of 441 mW cm-2at 60°C and sustains a cell voltage of approximately 0.73 V after 52 h at 30°*** findings confirm that HEO/C is a promising cathode catalyst for DBFCs.

关键词： Direct borohydride fuel cells (DBFC)

Thermodynamic properties of under-cooled silver melts

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2010年第1期53卷 76-80页

作者： ZHU YuYing 1 , LI Qiang 1,2,3, wang Ge 1 , jing qin 2 , wang Xu 1 , GAO Ying 3 & GAO jingNa 3 1 Department of Mechanical Engineering, Yanshan University, qinhuangdao 066004, China 2 Key Laboratory of Metastable Materials Science & Technology, Yanshan University, qinhuangdao 066004, China 3 Department of Materials Science & Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, China Department of Mechanical Engineering Yanshan University Qinhuangdao China Key Laboratory of Metastable Materials Science & Technology Yanshan University Qinhuangdao China Department of Materials Science & Engineering Hebei University of Science and Technology Shijiazhuang China

Differential scanning calorimeter technique combined with the traditional fluxing treatment was used to investigate the specific heat and related thermodynamic properties of under-cooled pure silver melts. The specific heat of the under-cooled melt showed a linear dependence on the temperature in the range of the obtained under-cooling from 0 to 198 K. The related thermodynamic properties of silver, such as the entropy change, the enthalpy change and the Gibbs free energy difference between the under-cooled melt and the solid phase, were derived from the measured specific heat. The relations between the temperature and the thermal diffusion or the thermal conductivity of the under-cooled melt were analyzed respectively.

关键词： under-cooled silver melts specific heat thermodynamic properties