检索结果-南通市图书馆

Journal of Iron and Steel Research International 2024年第1期31卷 1-2页

作者： Shuai Liu jing guo Han-jie guo School of Artificial Intelligence Beijing Technology and Business UniversityBeijing100048China School of Metallurgical and Ecological Engineering University of Science and Technology Beijing(USTB)Beijing100083China

Spanning three decades,***-jie guo's research group has dedicated itself to exploring the fundamental theories and practical applications of physical chemistry within the realm of *** under the assumption that molecul... 详细信息

关键词： chemistry liquid complexes

Thermodynamic and experimental study of high-temperature roasting of blast furnace gas ash for recovery of metallic zinc and iron

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 108-120页

作者： Zi-han Wang jing guo Han-jie guo Bin Li School of Metallurgical Engineering University of Science and Technology BeijingBeijing100083China School of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an710055ShaanxiChina

A high-temperature reduction roasting method was used to achieve metallic iron and zinc recovery from blast furnace gas ash(BFA).The reduction processes for Zn-containing and Fe-containing oxides were analyzed in detail by using ther-modynamic equilibrium calculation and the principle of minimum free *** results showed that the main reaction in the system is the reduction of ZnFe_(2)_(4)and iron *** the full temperature range,iron oxides were more easily reduced than zinc *** of the amount of CO contained in the system,the reduction of ZnO to Zn was difficult to proceed below the boiling point(906℃)of *** the reduction temperature is below 906℃,the reduction process of zinc ferrate was ZnFe_(2)_(4)→ZnO;when the reduction temperature is above 906℃,its reduction process becomed ZnFe_(2)_(4)→ZnO→Zn(g).The metallization and dezincification rates of the BFA gradually increased with increasing reaction *** the C/O ratio increased,the metallization and dezincification rates first increased and then *** effect of reduction time on BFA reduction was similar to that of reaction temperature.

关键词： Blast furnace gas ash Thermodynamics Zinc removal Iron reduction High-temperature reduction roasting Integrated utilization

Interface optimization of graphene paper-Cu composite prepared by electrodeposition

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 64-73页

作者： jing guo Hai-jing Wang Shuang-juan Liu Peng Zhang jing-yu Tang Wei-yang Zhang Han-jie guo Peng-cheng Wang Cai Meng School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing100083China Institute of High Energy Physics Chinese Academy of SciencesBeijing100049China Advanced Technology and Materials Co. Ltd.Beijing100083China School of Nuclear Science and Technology University of Science and Technology of ChinaHefei230027AnhuiChina

A room-temperature electrodeposition method with an organic electrolyte was developed to fabricate a HNO3-pretreated graphene paper Cu(GP'-Cu)*** improve the interfacial bonding of GP'-Cu composite,magnetron sputtering technology was used to create a"sandwich"structural gradient GP'-Cu *** selection of the intermediate transition layer metal was based on two-dimensional *** electron microscopy,X-ray photoelectron spectroscopy,and other analytical methods confirmed that the addition of an intermediate transition metal(Cr,Ni)layer reduced the gap distance and enhanced the interfacial bonding of the GP'and Cu deposited *** GP'-Ni-Cu composite exhibited the largest increase in tensile strength and *** addition,it had the highest thermal diffusivity and elongation at break among the GP'-Cu,GP'-Cr-Cu and GP'-Ni-Cu composites.

关键词： Graphene paper Two-dimensional disregistry Magnetron sputtering Metal composite

Exploring a new path of green and efficient utilization of sinter return fine to produce composite pellets

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1610-1622页

作者： Yan-biao Chen Wen-guo Liu Hao guo jing-song Wang Qing-guo Xue Hai-bin Zuo State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China MCC Capital Engineering and Research Incorporation Limited Beijing 100176China

Efficient utilization of sinter return fine is an important measure to reduce cost,increase efficiency,save energy and reduce emission.A new path of green and efficient utilization of return fine was proposed to produce composite *** metallurgical properties of composite pellets under the condition of hydrogen-rich blast furnace were *** experimental results indicate that the coated concentrate was consolidated for the composite pellets through normal Fe_(2)O_(3) *** the surface of core return fine,the liquid phase formed due to its low-melting point,assimilated the adjacent concentrate,and then consolidated with the temperature *** with regular pellets,the com-pressive strength and reduction swelling index of composite pellets were decreased,but the reducibility index and softening-melting properties were *** addition,the reduction degradation index of composite pellets was sig-nificantly higher than that of ***,adding composite pellets was conducive to indirect reduction in blast furnace,reducing fuel ratio and improving production *** to the effect of the roasting system on the metallurgical properties,the roasting temperature and time were determined as 1250℃and 30 min,*** composite pellets can be produced under the traditional pelletizing process.

关键词： Sinter Return fine Composite pellet Roasting system Metallurgical property Hydrogen-rich blast furnace

Distribution of oxide inclusions in H13 castings under super-gravity field with multi-stage rotation speeds

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 121-133页

作者： Shao-ying Li Xiao-jun Xi Xing-ming Zhao Han-jie guo jing guo School of Metallurgical and Ecological Engineering University of Science and Technology Beijing(USTB)Beijing100083China Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials Beijing100083China Beijing Beiye Functional Materials Corporation Beijing100192China Shandong Tianwu Forming Technology Co. Ltd.Liaocheng252024ShandongChina

The 42 kg industrial H13 castings were prepared by different super-gravity fields with multi-rotation speeds,and the distribution of oxide inclusions in the castings was *** addition,the inward movement Reynolds number and inward movement time of oxide inclusions as well as the solidification time of molten steel at different positions in the castings were calculated to clarify the removal mechanism of oxide inclusions in super-gravity *** results show that the large size(i.e.,greater than 10μm)oxide inclusions are mainly concentrated in the inner and outer parts of the super-gravity castings with constant rotation speed(500 r min^(-1))and five-stage rotation speeds(500,600,750,850,and 950 r min^(-1)),respectively,while there are no large oxide inclusions in the super-gravity castings with three-stage rotation speeds(500,600,and 750 r min^(-1)).Although an increase in the particle size of inclusion and the rotation speed in super-gravity field is conducive to the increase in the inward movement Reynolds number of oxide inclusions and reduction in the inward movement time of oxide inclusions,it will reduce the local solidification time of molten *** the range of the rotation speed studied,the super-gravity field with three-stage rotation speeds has the best effect on the removal of inclusions in H13 molten steel.

关键词： Distribution Oxide inclusion H13 casting Super-gravity field Rotation speed

Effect of slag composition on kinetic behavior of deep deoxidation of 5 wt.% Si high-silicon austenitic stainless steel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第8期31卷 1873-1885页

作者： Guan-xiong Dou Han-jie guo jing guo Xue-cheng Peng Qing-yun Chen School of Metallurgical and Ecological Engineering University of Science and Technology Beijing(USTB)Beijing 100083China Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials Beijing 100083China

Based on a thermodynamic study of 5 wt.%Si high-silicon austenitic stainless steel(SS-5Si)smelting using CaF_(2)-CaO-Al_(2)0_(3)-Mg-Si0_(2) slag to obtain a low oxygen content of less than 10×10^(-4) wt.%,a kinetic mass transfer model for deep deoxidation was established through laboratory studies,and the effects of slag components and temperature on deoxidation during the slag-steel reaction process of sS-5Si were systematically *** experimental data verified the accuracy of the model *** results showed that the final oxygen content in the steel at 1873 K was mainly controlled by the oxygen content derived from the activity of SiO_(2) regulated by the[Si]-[O]equilibrium reaction in the slag system;in particular,when the slag basicity R(R=w(CaO)/w(SiO2),where w(CaO)and w(SiO_(2))are the contents of CaO and SiO_(2) in the slag,respectively)is 3,the Al2O3 content in the slag needs to be less than 2.7%.The mass transfer rate equation for the kinetics of the deoxidation reaction revealed that the mass transfer of oxygen in the liquid metal is the rate-controlling step under different slag conditions at 1873 K,and the oxygen transfer coefficient ko.m increases with increasing the slag basicity from 4.0×10^(-6)m s^(-1)(R=1)to 4.3×10^(-5) m s^(-1)(R=3).ko.m values at R=2 and R=3 are almost the same,indicating that high slag basicity has little *** integral of the mass transfer rate equation for the deoxidation reaction of SS-5Si under different slag conditions is *** total oxygen content of the molten steel decreases with increasing basicity from an initial content of 22×10^(-4) to 3.2×10^(-4) wt.%(R=3),consistent with the change in ko.m with slag *** R=2,the slag-steel reaction takes 15 min to reach equilibrium(w[O]=5.5×10^(-4) wt.%),whereas at R=3,the slag-steel reaction takes 30 min to reach equilibrium(w[0]=3.2×10^(-4) wt.%).Considering the depth of deoxidation and reaction time of SS-5Si smelting,it is recommended the slag b

关键词： Slag-steel reaction Kinetics Rate-controlling step Deep deoxidation Transfer coefficient

Investigation of Maxima Assumptions in Modelling Tropical Cyclone- Induced Hazards in the South China Sea

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第3期38卷 491-504页

作者： WEN Ze-guo WANG Fu-ming WAN jing YANG Fan School of Civil Engineering Sun Yat-sen University&Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)Zhuhai 519082China Guangdong Academy of Safety Science and Technology Guangzhou 510060China Guangdong Key Laboratory of Oceanic Civil Engineering Guangzhou 510275China Advanced Energy Science and Technology Guangdong Laboratory(Yangjiang Offshore Wind Energy Laboratory) Yangjiang 529500China

The present study aims to examine the suitability of two commonly used assumptions that simplify modelling metoceanconditions for designing offshore wind turbines in the South China Sea (SCS). The first assumption assumes thatjoint N-year extreme wind and wave events can be independently estimated and subsequently combined. The secondone assumes peak wind and waves can be modelled as occurring simultaneously during a tropical cyclone (TC) *** better understand the potential TC activity, a set of 10000 years synthetic TC events are generated. The wind fieldmodel and the Mike 21 spectral wave model are employed to model the TC-induced hazards. Subsequently, theeffect of the assumptions is evaluated by analyzing the peak structural response of both monopile and semisubmersibleoffshore wind turbines during TC events. The results demonstrate that the examined assumptions are generally *** assessing the implications of these assumptions, valuable insights are obtained, which can inform andimprove the modelling of TC-induced hazards in the SCS region.

关键词： tropical cyclone numerical wave modelling hazards offshore wind turbines structural response

An active learning workflow for predicting hydrogen atom adsorption energies on binary oxides based on local electronic transfer features

在线全文

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第10期9卷 1489-1496页

作者： Wenhao jing Zihao Jiao Mengmeng Song Ya Liu Liejin guo International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Department of Energy and Power Engineering Shandong University of Technology

Machine learning combined with density functional theory（DFT） enables rapid exploration of catalyst descriptors space such as adsorption energy, facilitating rapid and effective catalyst screening. However, there is still a lack of models for predicting adsorption energies on oxides,due to the complexity of elemental species and the ambiguous coordination environment. This work proposes an active learning workflow（Le NN） founded on local electronic transfer features（e） and the principle of coordinate rotation invariance. By accurately characterizing the electron transfer to adsorption site atoms and their surrounding geometric structures, Le NN mitigates abrupt feature changes due to different element types and clarifies coordination environments. As a result, it enables the prediction of *H adsorption energy on binary oxide surfaces with a mean absolute error（MAE） below 0.18 e V. Moreover, we incorporate local coverage（θl） and leverage neutral network ensemble to establish an active learning workflow, attaining a prediction MAE below 0.2 e V for 5419 multi-*H adsorption structures. These findings validate the universality and capability of the proposed features in predicting *H adsorption energy on binary oxide surfaces.

关键词： Machine learning Adsorption energy Binary oxide Electron transfer Active learning

Enhanced bright green luminescence from GdOF:Ho^(3+) up-conversion phosphor via Yb^(3+) doping

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第2期42卷 263-269,I0002页

作者： Linjun Qin Yue guo jing Xu Lixi Wang Qitu Zhang College of Materials Science and Engineering Nanjing Tech UniversityNanjing211816China

In this paper,a series of GdOF-based green phosphors doped with Ho^(3+) and Yb^(3+) ions was prepared by a simple co-precipitation *** crystal structure s and optical prope rties were investigated in *** intensity of the emission of GdOF:Yb^(3+),Ho^(3+) phosphors is enhanced by the effective energy transfer from Yb^(3+) to Ho^(3+),and the optimal luminescence is achieved with the Ho^(3+)doping amount of 0.1 mol%as well as Yb^(3+) doping amount of 5 mol%.Tunable UC emission of samples is achieved by adjusting the doping concentration of Ho^(3+) or Yb^(3+).The purity of the green UC emission is further improved by enhancing the excitation pumping *** addition,logarithmic functions of green,red and nearinfrared radiation intensities were calculated versus logarithmic function of pump power for further study.A possible UC luminescence mechanism between Yb^(3+) and Ho^(3+) is discussed based on powerdependent UC luminescence spectrum and decay *** results suggest that GdOF:Yb^(3+),Ho^(3+)phosphors with bright and high-purity green UC emission have potential applications in the fields of bioimaging,display and illumination.

关键词： Up-conversion GdOF Lanthanide ions Rare earths

Effect of cerium on microstructure,texture and properties of ultrahigh-purity copper

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第1期42卷 220-227,I0008页

作者： Yunxiao Hua Haitao Liu Kexing Song Jiangwei Wang Yin'gang guo jing Tian Huiwen guo Provincial and Ministerial Co-construction of Collaborative Innovation Center for Non-ferrous Metal New Materials and Advanced Processing Technology School of Materials Science and EngineeringHenan University of Science and TechnologyLuoyang471023China Henan Academy of Sciences Zhengzhou450000China Center of Electron Microscopy and State Key Laboratory of Silicon Materials School of Materials Science and EngineeringZhejiang UniversityHangzhou310027China Henan Zhongyuan Gold Smelter Co. Ltd.Sanmenxia472100China Chinalco Luoyang Copper Processing Co. Ltd.Luoyang471039China

The effects of Ce addition(310 ppm and 1500 ppm)on the microstructure,texture and properties of ultrahigh-purity copper(99.99999%)were systematically studied using scanning electron microscopy(SEM),transmission electron microscopy(TEM)and electron backscattered diffraction(EBSD)analyses,combined with the microhardness and conductivity *** the microstructure of the as-cast and as-extruded samples,the addition of Ce refines the grain size of the ultrahigh-purity copper and the refinement effect of 310Ce alloy is greater than that of 1500Ce *** is due to the stronger compone nt supercooling and the accele rated recrystallization caused by lower Ce co *** addition,Ce can react with Cu to form the Cu-Ce eutectic phases,which are deformable during the hot ***,the added Ce can weaken the texture,showing a variation of brass recrystallization(BR),rotated cube,copper and S texture components,which depends on the recrystallization,the particle stimulated nucleation(PSN)as well as the stacking fault energy(SFE).Most remarkably,the introduction of Ce enhances the hardness of the ultrahigh-purity copper without obviously reducing its *** major{111}orientations and the stress distributions are responsible for such a superior conductivity of the Ce-containing alloys.

关键词： Ce addition Grain refinement Texture Conductivity Ultrahigh-purity copper Rare earths