检索结果-南通市图书馆

Relationship between crystallographic structure of complex inclusions MgAl_(2)O_(4)/Ti2O_(3)/MnS and improved toughness of heat-affected zone in shipbuilding steel

引用

Journal of Iron and Steel Research International 2022年第8期29卷 1277-1290页

作者： Yan Wang Li-guang Zhu jin-xia huo Qing-jun Zhang Yao-guang Wu Wei Chen Shuo-ming Wang College of Metallurgy and Energy North China University of Science and TechnologyTangshan 063210HebeiChina College of Materials Science and Engineering Hebei University of Science and TechnologyShijiazhuang 050018HebeiChina China Analysis and Testing Center North China University of Science and TechnologyTangshan 063210HebeiChina MCC Capital Engineering&Research Incorporation Limited Metallurgical Engineering Consulting and Design DivisionBeijing 100176China

In accordance with the minimum degree of disregistry mechanism in oxide metallurgy, the intragranular acicular ferrite (IAF) generated by microalloying elements in austenite was studied. Herein, the effect of Mg treatment on the microstructure and toughness of the heat-affected zone (HAZ) in shipbuilding steel was investigated. Mg treatment produced inclusions that influenced the formation of acicular ferrite in the microstructure. This refined the HAZ microstructure and improved its toughness. Electron backscatter diffraction was used to determine the oxides of titanium and the MgO Al_(2)O_(3) or MgAl_(2)O_(4) complex inclusions that induced the formation of IAF. MnS precipitated on MgAl_(2)O_(4) on a specific habit plane and in a specific direction. MnS had a specific orientation relationship with MgAl_(2)O_(4), i.e., f100gMgAl_(2)O_(4) //{100}MnS. The 35-mm-thick plate obtained in the industrial test after welding at a welding heat input of 120 kJ/cm had an average impact absorbed energy of 282.7 J at - 40 ℃ and 2 mm from the weld joint in the HAZ. The twodimensional disregistry index between inclusions can be used as the basis for controlling their distribution and adsorption force. Microalloy addition in the order of Al-Mg-Ti is key to obtaining abundant dispersion and fine nucleation in austenite.

关键词： High heat input welding Mg treatment Disregistry mechanism Heat-affected zone

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Intensifying electrified flow-through water treatment technologies via local environment modification

引用

Frontiers of Environmental Science & Engineering 2024年第6期18卷 17-25页

作者： Zheng-Yang huo xiaoxiong Wang xia Huang Menachem Elimelech School of Environment and Natural Resources Institute of Ecological CivilizationRenmin University of ChinaBeijing 100872China Institute for Ocean Engineering Tsinghua Shenzhen International Graduate SchoolTsinghua UniversityShenzhen 518055China Center of Double Helix Tsinghua Shenzhen International Graduate SchoolTsinghua UniversityShenzhen 518055China State Key Joint Laboratory of Environment Simulation and Pollution Control School of EnvironmentTsinghua UniversityBeijing 100084China Department of Chemical and Environmental Engineering Yale UniversityNew HavenCT 06520-8286USA

Removing high-risk and persistent contaminants from water is challenging,because they typically exist at low concentrations in complex water *** flow-through technologies are viable to overcome the limitations induced by mass transport for efficient contaminant *** the local environment of the flow-through electrodes offers opportunities to further improve the reaction kinetics and selectivity for achieving near-complete removal of these contaminants from ***,we present state-of-the-art local environment modification approaches that can be incorporated into electrified flow-through technologies to intensify water *** first show methods of nanospace incorporation,local geometry adjustment,and microporous structure optimization that can induce spatial confinement,enhanced local electric field,and microperiodic vortex,respectively,for local environment *** then discuss why local environment modification can complement the flow-through electrodes for improving the reaction rate and ***,we outline appropriate scenarios of intensifying electrified flow-through technologies through local environment modification for fit-for-purpose water treatment applications.

关键词： Point-of-use water treatment Electrified membrane Advection-enhanced mass transport Water decontamination and disinfection Emerging contaminants

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High performance photodegradation resistant PVA@TiO_(2)/carboxyl-PES self-healing reactive ultrafiltration membrane

引用

Chinese Journal of Chemical Engineering 2024年第2期66卷 31-39页

作者： Yu Liang Yuanfang Fan Zhongmin Su Mingxin huo xia Yang Hongliang huo Chi Wang Zhi Geng College of Environment Engineering Research Center of Low-Carbon Treatment and Green Development of Polluted Water in Northeast ChinaMinistry of EducationNortheast Normal UniversityChangchun 130117China School of Science Hainan UniversityHaikou 570225China

The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF *** self-cleaning UF membranes can effectively alleviate the problem of membrane ***,the self-cleaning process may accelerate membrane *** these concerns,we present an innovative design concept for composite self-healing materials based on self-cleaning UF *** begin,TiO_(2)nanoparticles were incorporated into the polymer molecular structure via molecular design,resulting in the synthesis of TiO_(2)/carboxyl-polyether sulfone(PES)hybrid ***,the nonsolvent-induced phase inversion technique was employed to prepare a novel of UF ***,a polyvinyl alcohol(PVA)hydrogel coating was applied to the hybrid UF membrane surface to create PVA@TiO_(2)/carboxyl-PES self-healing reactive UF *** establishing a covalent bond,the TiO_(2)nanoparticles were effectively and uniformly dispersed within the UF membrane,leading to exceptional self-cleaning ***,the water-absorbing and swelling properties of PVA hydrogel,along with its capacity to form hydrogen bonds with water molecules,resulted in UF membranes with improved hydrophilicity and active self-healing *** results demonstrated that the water contact angle of PVA@5%TiO_(2)/carboxyl-PES UF membrane was 43.1°.Following a 1-h exposure to simulated solar exposure,the water flux recovery ratio increased from 48.16%to 81.03%.Moreover,even after undergoing five cycles of 12-h simulated sunlight exposure,the UF membranes exhibited a consistent retention rate of over 97%,thus fully demonstrating their exceptional self-cleaning,antifouling,and selfhealing *** anticipate that the self-healing reactive UF membrane system will serve as a pioneering and comprehensive solution for the self-cleaning antifouling challenges encountered in UF membranes while also effectively mitigating the aging effects of reactive

关键词： Ultrafiltration membrane Self-cleaning Self-healing Poly(aryl ether sulfone)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The Role of Consumer Privacy Concerns in Shaping Platform Strategy for Online Markets

引用

Journal of the Operations Research Society of China 2024年第2期12卷 363-386页

作者： jin-Kun Yang Yong-Rui Duan Jia-Zhen huo School Economics and Management Tongji UniversityShanghai 200092China

We investigate the effects of consumer privacy concerns on the pricing and personal data collection strategy of an online *** online platform derives revenues from disclosing consumer information to *** compete for the information in order to enable them to price discriminate and thus derive revenues from consumer purchases.A novel aspect of our research is that we allow the online platform to sell only a subset of consumer *** develop analytical models where consumers can/cannot protect their *** analysis yields three main ***,in the monopoly case,we find that when the consumer privacy disclosure aversion cost is relatively low,it is optimal for the platform to sell all consumer information to the ***,in the duopoly case,we illustrate that when the consumer privacy disclosure aversion cost is relatively low,the platform will sell all consumer information to only one firm;when the cost is moderate,the platform will choose to sell the information of only some consumers and to only one firm;when the cost is relatively high,the platform will select only some of the consumers and sell their information to both ***,it will be better for the platform to provide the information protection service for free when the privacy cost is low.

关键词： Price discrimination User privacy Consumer information Two-sided market Privacy disclosure aversion cost

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Highly efficient and stable electrocatalyst for hydrogen evolution by molybdenum doped Ni-Co phosphide nanoneedles at high current density

引用

Nano Research 2024年第3期17卷 1066-1074页

作者： Chengyu Huang Zhonghong xia jing Wang jing Zhang Chenfei Zhao Xingli Zou Shichun Mu Jiujun Zhang Xionggang Lu Hong jin Fan Shengjuan huo Yufeng Zhao College of Sciences&Institute for Sustainable Energy Shanghai UniversityShanghai 200444China State Key Laboratory of Metastable Materials Science and Technology Hebei Key Laboratory of Heavy Metal Deep-Remediation in Water and Resource ReuseYanshan UniversityQinhuangdao 066004China State Key Laboratory of Advanced Special Steel and Shanghai Key Laboratory of Advanced Ferrometallurgy School of Materials Science and EngineeringShanghai UniversityShanghai 200444China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Physical and Mathematical Sciences Nanyang Technological UniversitySingapore639798

There is an increasingly urgent need to develop cost-effective electrocatalysts with high catalytic activity and stability as alternatives to the traditional Pt/C in catalysts in water *** this study,microspheres composed of Mo-doped NiCoP nanoneedles supported on nickel foam were prepared to address this *** results show that the nanoneedles provide sufficient active sites for efficient electron transfer;the small-sized effect and the micro-scale roughness enhance the entry of reactants and the release of hydrogen bubbles;the Mo doping effectively improves the electrocatalytic performance of NiCoP in alkaline *** catalyst exhibits low hydrogen evolution overpotentials of 38.5 and 217.5 mV at a current density of 10 mA·cm^(-2) and high current density of 500 mA·cm^(-2),respectively,and only 1.978 V is required to achieve a current density of 1000 mA·cm^(-2) for overall water *** functional theory(DFT)calculations show that the improved hydrogen evolution performance can be explained as a result of the Mo doping,which serves to reduce the interaction between NiCoP and intermediates,optimize the Gibbs free energy of hydrogen adsorption(△G_(*H)),and accelerate the desorption rate of **** study provides a promising solution to the ongoing challenge of designing efficient electrocatalysts for high-current-density hydrogen production.

关键词： transition metal phosphides Mo-doped NiCoP hydrogen evolution reaction gradient hydrothermal water splitting

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Analytic Formulae for Estimating Motor Proportion of Load Model Under Small Disturbance

引用

CSEE Journal of Power and Energy Systems 2024年第4期10卷 1599-1607页

作者： Ping Ju Shiqiu xia Yuqing jin Lu Cao School of Electrical and Power Engineering Hohai UniversityNanjing 211100China the East China Branch of the State Grid Corporation of China Shanghai 200120China

In the composite load model(CLM),which is commonly used in China,an equivalent motor and equivalent static load are used to represent all electrical equipment and networks connected to a load *** research has determined typical values of electrical and mechanical parameters for load models of different load types,which improves the basis for load ***,the motor proportion parameter is not the same for different load buses or at different times;therefore,obtaining the actual motor proportion is key to establishing an accurate load *** the existing load modeling method,motor proportion is commonly identified along with other parameters under rare large disturbances;therefore,the value of the motor proportion is fixed by the time when a large disturbance *** this paper,formulae are derived to estimate motor proportion under small disturbances,and these formulae allow direct calculation of motor proportion without using any optimization *** proposed estimation formulae do not rely on any parameters of load model or power system but instead rely only on measurement of the voltage and active power at steady-state points before and after a small *** of universality of small disturbances in power systems,estimating time-varying motor proportion under small disturbances will be helpful for solving the time-varying problem of load ***,the proposed motor proportion estimation formulae are validated by simulations,physical experiments,and field experiments.

关键词： Composite load model load modeling motor proportion parameter estimation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Improved STNModels and Heuristic Rules for Cooperative Scheduling in Automated Container Terminals

引用

Computer Modeling in Engineering & Sciences 2024年第2期138卷 1637-1661页

作者： Hongyan xia jin Zhu Institute of Logistics Science and Engineering Shanghai Maritime UniversityShanghai201306China

Improving the cooperative scheduling efficiency of equipment is the key for automated container terminals to copewith the development trend of large-scale ships. In order to improve the solution efficiency of the existing spacetimenetwork (STN) model for the cooperative scheduling problem of yard cranes (YCs) and automated guidedvehicles (AGVs) and extend its application scenarios, two improved STN models are proposed. The flow balanceconstraints in the original model are decomposed, and the trajectory constraints of YCs and AGVs are added toacquire the model STN_A. The coupling constraint in STN_A is updated, and buffer constraints are added toSTN_A so that themodel STN_B is *** the size of the problem increases, the solution speed of CPLEX becomesthe bottleneck. So a heuristic method containing three groups of heuristic rules is designed to obtain a near-optimalsolution quickly. Experimental results showthat the computation time of STN_A is shortened by 49.47% on averageand the gap is reduced by 1.69% on average compared with the original model. The gap between the solution ofthe heuristic rules and the solution of CPLEX is less than 3.50%, and the solution time of the heuristic rules is onaverage 99.85% less than the solution time of CPLEX. Compared with STN_A, the computation time for solvingSTN_B increases by 58.93% on average.

关键词： Automated container terminal buffer cooperative scheduling heuristic rules space-time network

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Exploring precursor effect in in-situ reconstruction of Bi metal organic-frameworks during CO_(2)electroreduction reaction to tailor formate selectivity towards 100%

引用

Science China Chemistry 2024年第7期67卷 2190-2198页

作者： Zhida Liu Qikui Fan Hang huo Fanglei Yao xiaoping Gao jin Wang College of Materials Science and Engineering Shenzhen UniversityShenzhen 518071China College of Physics and Optoelectronic Engineering Shenzhen UniversityShenzhen 518060China Key Laboratory of Functional Molecular Solids Ministry of EducationCollege of Chemistry and Materials ScienceAnhui Normal UniversityWuhu 241002China Hefei National Research Center for Physical Sciences at the Microscale University of Science and Technology of ChinaHefei 230026China

Bi-based metal-organic frameworks(Bi-MOFs)as efficient catalysts for the CO_(2)electroreduction reaction(CRR)have been extensively *** has been established that Bi-MOFs usually undergo in-situ transformation during the CRR,ultimately converting into Bi ***,the effect of the MOF precursors on the structure of the derived Bi catalysts and consequently on their electrocatalytic properties has not been clearly *** this work,we prepared four variants of a novel Bi-MOF with different morphologies and dimensions,and explored the effects of the precursors on the resulting Bi catalysts and their CRR performance.A precursor-dependent in-situ transformation and its profound impact on tuning the CO_(2)-formate FE towards~100%have been *** the four examined variants,Bi-MOF with nanocube-like morphology(BiMOF-NC)is transformed into thin and flat Bi nanosheets capable of successfully enveloping the fibers of carbon paper(working electrode),while the other three variants with increased size and dodecahedral/octahedral geometry have been transformed into Bi nanoflowers,exposing a fair portion of the carbon fibers in the working ***,the transformation rate was found to be dependent on the precursors and BiMOF-NC exhibited the highest rate of reconstruction compared with other ***,the Bi catalyst derived from BiMOF-NC delivered a selectivity for the formate product of nearly 100%at-1.2 V(*** hydrogen electrode(RHE))and of over 95%in a wide potential range due to efficient suppression of the competing hydrogen evolution reaction(HER)over carbon *** in-situ transformed BiMOFNC also demonstrated equivalently high formate selectivity at large current densities(≥100 mA cm^(-2))in flow cell reactors as that in H-type reactors,underscoring its potential for industrial *** work highlights the necessity of finely tuning the structural features of MOF precursors to achieve optim

关键词： Bi-MOFs precursor effect in-situ transformation Bi nanosheets CO_(2)-to-formate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Configuration Synthesis and Grasping Performance Analysis of Multi-Loop Coupling Capture Mechanism for Launch and Recovery of Torpedo-Shaped Autonomous Underwater Vehicle

引用

China Ocean Engineering 2024年第3期38卷 453-466页

作者： ZHANG Guo-xing xia Xin-lu GUO jin-wei School of Mechanical Engineering Jiangsu University of Science and TechnologyZhenjiang 212100China

Research of capture mechanisms with strong capture adaptability and stable grasp is important to solve the problem of launch and recovery of torpedo-shaped autonomous underwater vehicles(AUVs).A multi-loop coupling capture mechanism with strong adaptability and high retraction rate has been proposed for the launch and recovery of torpedo-shaped AUVs with different morphological ***,the principle of capturing motion retraction is described based on the appearance characteristics of torpedo-shaped AUVs,and the configuration synthesis of the capture mechanism is carried out using the method of constrained chain ***,the screw theory is employed to analyze the degree of freedom(DoF)of the capture ***,the 3D model of the capture mechanism is established,and the kinematics and dynamics simulations are carried *** with the capture orientation requirements of the capture mechanism,the statics and vibration characteristics analyses are carried ***,considering the capture process and the underwater working environment,the motion characteristics and hydraulics characteristics of the capture mechanism are ***,a principle prototype is developed and the torpedo-shaped AUVs capture experiment is *** work provides technical reserves for the research and development of AUV capture special equipment.

关键词： capture mechanism torpedo-shaped AUVs configuration synthesis launch and recovery grasping performance analysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mitigation of Optical Multipath Interference Algorithms in IM-DD Transmission System

引用

China Communications 2024年第4期21卷 1-9页

作者： huo Jiahao Zhu jin Zhu Zuqing Zhang xiaoying Liu Shaonan Tao Jianlong Wei Huangfu School of Computer and Communication Engineering University of Science and Technology BeijingBeijing 100083China School of Information Science and Technology University of Science and Technology of ChinaHefei 230026China

This paper aimed to propose two algorithms,DA-M and RF-M,of reducing the impact of multipath interference(MPI)on intensity modulation direct detection(IM-DD)systems,particularly for four-level pulse amplitude modulation(PAM4)***-M reduced the fluctuation by averaging the signal in blocks,RF-M estimated MPI by subtracting the decision value of the corresponding block from the mean value of a signal block,and then generated interference-reduced samples by subtracting the interference signal from the product of the corresponding MPI estimate and then weighting *** paper firstly proposed to separate the signal before decision-making into multiple blocks,which significantly reduced the complexity of DA-M and *** results showed that the MPI noise of 28 GBaud IMDD system under the linewidths of 1e5 Hz,1e6 Hz and 10e6 Hz can be effectively alleviated.

关键词： IM-DD multipath interference PAM4

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：