检索结果-南通市图书馆

Whole petroleum system and ordered distribution pattern of conventional and unconventional oil and gas reservoirs

Petroleum Science 2023年第1期20卷 1-19页

作者： cheng-Zao Jia xiong-Qi Pang Yan Song PetroChina Research Institute of Petroleum Exploration&Development Beijing100083China State Key Laboratory of Petroleum Resources and Prospecting China University of PetroleumBeijing102249China China University of Petroleum Beijing102249China

The classical source-to-trap petroleum system concept only considers the migration and accumulation of conventional oil and gas in traps driven dominantly by buoyance in a basin,although revised and improved,even some new concepts as composite petroleum system,total petroleum system,total composite petroleum system,were proposed,but they do not account for the vast unconventional oil and gas reservoirs within the system,which is not formed and distributed in traps dominantly by ***,the petroleum system concept is no longer adequate in dealing with all the oil and gas accumulations in a basin where significant amount of the unconventional oil and gas resources are present in addition to the conventional oil and gas *** paper looked into and analyzed the distribution characteristics of conventional and unconventional oil/gas reservoirs and their differences and correlations in petroliferous basins in China and North America,and then proposed whole petroleum system(WPS)concept,the WPS is defined as a natural system that encompasses all the conventional and unconventional oil and gas,reservoirs and resources originated from organic matter in source rocks,the geological elements and processes involving the formation,evolution,and distribution of these oil and gas,reservoirs and *** is found in the WPS that there are three kinds of hydrocarbons dynamic fields,three kinds of original hydrocarbons,three kinds of reservoir rocks,and the coupling of these three essential elements lead to the basic ordered distribution model of shale oil/gas reservoirs contacting or interbeded with tight oil/gas reservoirs and separated conventional oil/gas reservoirs from source rocks upward,which is expressed as“S\T-C”.Abnormal conditions lead to other three special ordered distribution models:The first is that with shale oil/gas reservoirs separated from tight oil/gas *** second is that with two direction ordered distributions from sou

关键词： Conventional and unconventional oil and gas Petroleum system Whole petroleum system Hydrocarbon reservoirs ordered distribution model Fossil energy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A fuzzy compensation-Koopman model predictive control design for pressure regulation in proten exchange membrane electrolyzer

引用

CHINESE JOURNAL OF CHEMICAL ENGINEERING 2024年第12期76卷 251-263页

作者： xiong, Haokun Xie, Lei Hu, cheng Su, Hongye Zhejiang Univ State Key Lab Ind Control Technol Hangzhou 310027 Peoples R China

Proton exchange membrane (PEM) electrolyzer have attracted increasing attention from the industrial and researchers in recent years due to its excellent hydrogen production performance. Developing accurate models to predict their performance is crucial for promoting and accelerating the design and optimization of electrolysis systems. This work developed a Koopman model predictive control (MPC) method incorporating fuzzy compensation for regulating the anode and cathode pressures in a PEM electrolyzer. A PEM electrolyzer is then built to study pressure control and provide experimental data for the identification of the Koopman linear predictor. The identified linear predictors are used to design the Koopman MPC. In addition, the developed fuzzy compensator can effectively solve the Koopman MPC model mismatch problem. The effectiveness of the proposed method is verified through the hydrogen production process in PEM simulation. (c) 2024 The Chemical Industry and Engineering Society of China, and Chemical Industry Press Co., Ltd. All rights are reserved, including those for text and data mining, AI training, and similar technologies.

关键词： Hydrogen production PEM electrolyzer Nonlinear control Model predictive control Koopman operator Fuzzy logic system

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Neutronic analysis of silicon carbide cladding accident-tolerant fuel assemblies in pressurized water reactors

引用

Nuclear Science and Techniques 2019年第3期30卷 105-113页

作者： Zhi-xiong Tan Jie-jin Cai School of Electric Power South China University of Technology

In resonance with the Fukushima Daiichi Nuclear Power Plant accident lesson, a novel fuel design to enhance safety regarding severe accident scenarios has become increasingly appreciated in the nuclear power industry. This research focuses on analysis of the neutronic properties of a silicon carbide(SiC) cladding fuel assembly, which provides a greater safety margin as a type of accident-tolerant fuel for pressurized water reactors. The general physical performance of SiC cladding is explored to ascertain its neutronic performance. The neutron spectrum, accumulation of ^(239)Pu, physical characteristics,temperature reactivity coefficient, and power distribution are analyzed. Furthermore, the influences of a burnable poison rod and enrichment are explored. SiC cladding assemblies show a softer neutron spectrum and flatter power distribution than conventional Zr alloy cladding fuel assemblies. Lower enrichment fuel is required when SiC cladding is adopted. However, the positive reactivity coefficient associated with the SiC material remains to be offset. The results reveal that SiC cladding assemblies show broad agreement with the neutronic performance of conventional Zr alloy cladding fuel. In the meantime, its unique physical characteristics can lead to improved safety and economy.

关键词： Accident-tolerant fuels Silicon carbide cladding Neutronic characteristics Pressurized water reactor

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

PREDICTION OF PODDED PROPELLER CAVITATION USING AN UNSTEADY SURFACE PANEL METHOD

引用

Journal of Hydrodynamics 2008年第6期20卷 790-796页

作者： YE jin-ming xiong Ying College of Naval Architecture and Power Naval University of Engineering Wuhan 430033 China

The unsteady sheet cavitation of podded propeller was predicted by using a surface panel method. The interaction between propeller and pod was treated with the iterative calculation of induced velocity potential, and the method of induced velocity potential can save a great deal of storage and computation time compared to the method of induced velocity. The induced velocity potential of unit singularity on every pod panel to every key blade panel and of unit singularity on every key blade panel and its wake panel to every pod panel were calculated when the key blade is at every angle position. Based on the wake model of the conventional single propeller, a new wake model of podded propeller was constructed. The propeller is analyzed only on the key blade in order to save computation time and memory space. The method can be used to calculate the hydrodynamics performance and cavitation of propeller in uniform and non-uniform inflows. It can give the unsteady force and cavitation shape of propeller. The propeller cavitation range determined by the present method agrees with the observation results of cavity image given in cavitation tunnel well, and this proves the practicability of the method.

关键词： pod propeller unsteady performance cavitation surface panel method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fast Position and Velocity Determination for Pulsar Navigation Using NML and LSM

引用

Chinese Journal of Electronics 2017年第6期26卷 1325-1329页

作者： LIU jin WU jin xiong Ling FANG Jiancheng LIU Gang College of Information Science and Engineering Wuhan University of Science and Technology School of Instrumentation Science and Opto-electronics Engineering Beihang University

To reduce the computational cost, a Fast position and velocity joint determination(FPVD) method based on the Near-maximum likelihood(NML) and the Least square method(LSM) is proposed for X-ray pulsar navigation. Considering the fact that the Doppler effects caused by the velocity of the spacecraft alters the X-ray pulse Time-of-arrival(TOA), we adopt the NML to obtain multi-TOAs, and then utilize the LSM to estimate the variation of TOAs instead of the pulsar profile distortion adopted by the Maximum-likelihood(ML) estimation method. Finally, according to the variation value and TOAs, the position and velocity information of the spacecraft are calculated. The simulation results have demonstrated that the FPVD method is far faster than the ML estimation method, and its accuracy approaches the CramerRao lower bound(CRLB).

关键词： Velocity determination Pulsar Maximum likelihood Least square method

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A versatile synthetic strategy towards rare earth based metal-organic frameworks

引用

Science China Chemistry 2025年

作者： Quan Shi Yun-Hao Xu Ming-Hui Chen Peng Zhao Wen-Bo Deng Ji xiong Kai Guo Ya-Qing Feng Bao Zhang School of Chemical Engineering and Technology Tianjin University Tianjin Collaborative Innovation Center of Chemical Science and Engineering Guangdong Laboratory Chemistry & Fine Chemical Industry Jieyang Center

Rare earth metal-organic frameworks (RE-MOFs) have drawn wide attention owing to diverse network structures and various application ***,due to the unpredictable formation of the nodes,it is still challenging to design novel RE-MOFs.A novel versatile strategy was developed employing a RE-acetate complex (RE2(CH3COO)6·4H2O) as a precursor to construct RE-MOFs.2D RE-MOFs (RE-DBP) and 3D RE-MOFs (RE-TCPP) could be obtained by using dicarboxylic porphyrin ligands H2DBP and tetracarboxylic porphyrin ligands H2TCPP,*** RE-MOFs were further synthesized to verify the universality of the *** crystalline RE-MOFs could also be prepared at room temperature via the developed strategy,which could significantly promote large-scale preparation and practical application of *** proof of the concept,the performance of porphyrin-based RE-MOFs was investigated in the photocatalytic cycloaddition of CO2with *** the RE-DBP(Co) MOFs,Tb-DBP(Co) exhibited the best photocatalytic performance,which was also greater than that of the corresponding 3D MOF Tb-TCPP(Co) due to the optimal 2D structure and thus the accelerated photogenerated charge separation and transfer *** work not only provides a novel versatile strategy to design and develop RE-MOFs,but also proposes a promising approach for the potential bulk production of RE-MOFs at room temperature.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

杜仲促进去势大鼠牙槽骨成骨的作用

引用

中国组织工程研究 2025年第6期29卷 1159-1167页

作者：郑琳靳文君罗珊珊黄芮王杰程余婷安哲庆熊玥巩仔鹏廖健贵州医科大学口腔医学院/附属口腔医院贵州省贵阳市550004 贵州医科大学民族药与中药开发应用教育部工程研究中心贵州省贵阳市550004

背景:杜仲具有一定的成骨作用,能够促进成骨细胞的增殖及分化,但其对牙槽骨骨形成及Wnt/β-连环蛋白信号通路的影响尚不明确。目的:基于Wnt/β-连环蛋白信号通路探讨杜仲促进去势大鼠牙槽骨成骨的作用机制。方法:采用随机数字表法将60... 详细信息

背景:杜仲具有一定的成骨作用,能够促进成骨细胞的增殖及分化,但其对牙槽骨骨形成及Wnt/β-连环蛋白信号通路的影响尚不明确。目的:基于Wnt/β-连环蛋白信号通路探讨杜仲促进去势大鼠牙槽骨成骨的作用机制。方法:采用随机数字表法将60只雌性SD大鼠分为空白对照组、假手术组、模型组、杜仲低剂量组、杜仲高剂量组,每组12只。模型组、杜仲低剂量组、杜仲高剂量组通过双侧卵巢切除术建立骨质疏松大鼠模型,假手术组切除双侧卵巢周围同等质量的脂肪组织。造模3个月后,杜仲低、高剂量组大鼠分别灌胃给予2.1,4.2 g/(kg•d)的杜仲,假手术组和模型组大鼠灌胃给予生理盐水。药物干预12周后取材,通过Micro-CT观察牙槽骨骨量变化,苏木精-伊红染色观察牙槽骨病理结构变化,ELISA法检测血清中碱性磷酸酶、骨钙素水平,Western blot检测牙槽骨组织中β-连环蛋白、卷曲蛋白9的蛋白表达,RT-qPCR检测牙槽骨组织中骨钙素、Runx2、碱性磷酸酶、β-连环蛋白、卷曲蛋白9 mRNA的表达。结果与结论:①与空白对照组比较,模型组骨体积分数、骨小梁数目、骨小梁厚度、骨密度均降低(P<0.05),骨小梁分离度升高(P<0.05);病理观察可见骨小梁排列紊乱、不规则,骨小梁变细或断裂,骨髓腔变大,骨量明显减少;血清中碱性磷酸酶水平上升(P<0.05),骨钙素水平下降(P<0.05);碱性磷酸酶、骨钙素、Runx2、β-连环蛋白、卷曲蛋白9的mRNA表达均降低(P<0.05);β-连环蛋白、卷曲蛋白9的蛋白表达降低(P<0.05)。②与模型组比较,杜仲低、高剂量组大鼠牙槽骨骨体积分数、骨小梁数目、骨小梁厚度、骨密度均升高(P<0.05),骨小梁分离度降低(P<0.05);杜仲低、高剂量组骨小梁排列稍整齐,骨小梁较粗大,骨量增加;杜仲低、高剂量组血清中碱性磷酸酶水平下降(P<0.05),骨钙素水平上升(P<0.05);杜仲低剂量组碱性磷酸酶、骨钙素、β-连环蛋白、卷曲蛋白9的mRNA表达升高(P<0.05),杜仲高剂量组碱性磷酸酶、骨钙素、Runx2、β-连环蛋白、卷曲蛋白9的mRNA表达升高(P<0.05);杜仲低剂量组卷曲蛋白9蛋白表达升高(P<0.05),杜仲高剂量组β-连环蛋白、卷曲蛋白9的蛋白表达升高(P<0.05);③与杜仲低剂量组比较,杜仲高剂量组对上述指标的改善作用更显著;④提示:杜仲能有效促进牙槽骨骨形成,其作用机制可能与激活Wnt/β-连环蛋白信号通路有关。

关键词：杜仲牙槽骨骨形成去势大鼠 Wnt/β-连环蛋白信号通路骨质疏松

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Regularization of mathematical model for chip flow angle catastrophe

引用

Advances in Manufacturing 2021年第4期9卷 568-579页

作者： Shao-Nan Zhang Dong-Dong cheng Liang-Shan xiong School of Mechanical Science and Engineering Huazhong University of Science and TechnologyWuhan 430074People’s Republic of China

The chip flow angle(CFA)catastrophe in double-edged cutting results in a significant reduction in the cutting force,which can benefit the ***,established potential functions(i.e.,cutting power calculation functions)of mathematical models for the CFA catastrophe are presented in the form of transcendental functions with two control parameters and one state parameter,which are extremely complex.A method is proposed herein to realize the regularization of the potential functions and establish mathematical models in a standard form and with complete content for the CFA *** this method,the potential function of the CFA catastrophe is expanded into a k-order Taylor polynomial at each midpoint of N end-to-end equally partitioned intervals of the state parameter using the Taylor function provided in *** potential function after piecewise Taylor expansion is transformed into the same form as the potential function of the standard cusp catastrophe model by truncating the first five terms of the Taylor polynomial and eliminating the third-order term of the state parameter with elementary ***,the regularization of potential function is ***,the regularization of equilibrium surface and bifurcation set can be realized based on the conclusions of the catastrophe *** errors of the potential function,equilibrium surface,and bifurcation set are defined to evaluate the effectiveness of this regularization *** problem of calculating regularization errors is regarded as an optimization ***‘‘simulannealbnd’’function provided in MATLAB is used to solve the *** the proposed method,the regularization of a mathematical model for the CFA catastrophe established by the predecessor is completed;a mathematical model(i.e.,standard cusp catastrophe model)in a standard form and with complete content for the CFA catastrophe is established;and the corresponding regularization errors

关键词： Chip flow angle(CFA)catastrophe Mathematical model Regularization Potential function Catastrophe theory Cusp catastrophe model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

稀土元素Er、Yb和Y掺杂ZrO_(2)的第一性原理研究

引用

原子与分子物理学报 2025年第1期42卷 156-162页

作者：熊威任浩重庆交通大学航空学院重庆402247 重庆交通大学绿色航空技术研究院重庆401147

氧化锆具有声子能量低,介电常数高和带隙较宽等优良特性,并且立方相的氧化锆(cZrO_(2))透光率高,适合作为上转换发光材料的基质.采用基于密度泛函理论(DFT)的第一性原理平面波赝势法研究了稀土元素Er、Yb和Y掺杂cZrO_(2)的电子结构和光... 详细信息

氧化锆具有声子能量低,介电常数高和带隙较宽等优良特性,并且立方相的氧化锆(cZrO_(2))透光率高,适合作为上转换发光材料的基质.采用基于密度泛函理论(DFT)的第一性原理平面波赝势法研究了稀土元素Er、Yb和Y掺杂cZrO_(2)的电子结构和光学性质.计算结果显示,掺入Y元素后,cZrO_(2)转变为直接带隙材料,继续掺入Er和Yb原子后,费米能级移动到价带内,带隙显著减小.Y和Er混掺后,增强了cZrO_(2)在近红外波段的吸收能力.继续掺入Yb后,cZrO_(2)对近红外波段的吸收能力有了进一步地增加.

关键词：氧化锆第一性原理电子结构光学性质

来源：

维普期刊数据库博看期刊

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Source parameters inversion of the 2013 Lushan earthquake by combining teleseismic waveforms and local seismograms

引用

Science China Earth Sciences 2013年第6期56卷 1177-1186页

作者： XIE ZuJun jin BiKai ZHENG Yong GE Can xiong xiong xiong cheng HSU HouTze State Key Laboratory of Geodesy and Earth's Dynamic Institute of Geodesy and GeophysicsChinese Academy of Sciences College of Earth Sciences University of Chinese Academy of Sciences

On April 20, 2013, a magnitude M s 7.0 earthquake occurred in Lushan, Sichuan Province, China, and caused heavy casualties and economic losses. Based on the local broadband waveforms in Sichuan and adjacent provinces regional networks and teleseismic broadband records from IRIS stations, the focal mechanism and the focal depth are determined by the CAP (Cut And Paste) and its upgraded methods, CAPtele and CAPjoint, respectively. The results show that the focal mechanisms and depth from different methods are steady, and the best double couple solution derived from the joint inversion is 210°, 44°, and 91° for strike, dip, and rake angles respectively for one nodal plane and 29°, 46°, and 89° for another with 16 km focal depth and M w 6.66 moment magnitude. In order to verify the reliability of the results, a number of tests are performed based on local seismograms with different velocity models. They indicate that there is about 10 degree's fluctuation in focal mechanisms and about 2 km variation in focal depth with a complex velocity structure. Furthermore, inverted by re-sampling the teleseismic waveforms on the basis of epicentral distance, the solutions are consistent with each other, which manifests that the teleseismic records are effective for constraining source parameters of the Lushan earthquake.

关键词： Lushan earthquake focal mechanism focal depth CAP method

来源：

维普期刊数据库

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：