检索结果-南通市图书馆

Surficial modification enabling planar Al growth toward dendrite-free metal anodes for rechargeable aluminum batteries

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第4期67卷 1341-1351页

作者： Wenhao Liu Yu Li Bo Long Haoyi Yang Lumin Zheng Ying Bai feng wu Chuan wu School of Materials Science and Engineering Beijing Institute of TechnologyBeijing 100081China Yangtze Delta Region Academy of Beijing Institute of Technology Jiaxing 314019China

Al metal possesses ultrahigh theoretical volumetric capacity of 8,040 m Ah cm^(-3),and gravimetric capacity of 2,980 m Ah g^(-1),and thus is highly attractive for electrochemical energy ***,it suffers from several issues,such as the dendrite formation,during Al stripping-deposition cycling,which has been verified to account for the short circuit and limited cyclic ***,we use a facile and applicable method to in-situ reconstruct the Al anode surface with F-Al-O chemical bonds,which could preferentially induce the planar growth of Al along the interface plane,thus leading to the dendrite-free morphology evolution during the *** from F-Al-O chemical bonds on the surface of Al anodes,long lifespan of symmetric cells can be realized even under 1 m A cm^(-2)and 1 m Ah cm^(-2).Coupling the F-Al anode with graphite-based cathodes,high-voltage dual-ion Al metal batteries can be achieved with long-term cycle stability up to 1,200 cycles(at 0.5 m A cm^(-2)),surpassing the counterparts using pristine Al metal ***,the effectiveness of this surficial modification strategy is also elucidated with the aid of theoretical *** work provides novel insights on low-cost and facile strategies against the Al dendrite growth in aluminum batteries.

关键词： rechargeable aluminum batteries Al metal anode Al dendrite dual-ion batteries surficial modification

Counteracting effects on ENSO induced by ocean chlorophyll interannual variability and tropical instability wave-scale perturbations in the tropical Pacific

在线全文

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第2期67卷 387-404页

作者： Rong-Hua ZHANG feng TIAN Qidong SHI Xiujun WANG Tongwen wu School of Marine Sciences Nanjing University of Information Science and TechnologyNanjing210044China Laoshan Laboratory Qingdao266237China Key Laboratory of Ocean Circulation and Waves Institute of OceanologyChinese Academy of SciencesQingdao266071China University of Chinese Academy of Sciences Beijing101408China Faculty of Geographical Sciences Beijing Normal UniversityBeijing100875China Earth System Modeling and Prediction Centre China Meteorological AdministrationBeijing100081China

Large perturbations in chlorophyll(Chl)are observed to coexist at interannual and tropical instability wave(TIW)scales in the tropical Pacific;at present,their combined effects on El Ni?o-Southern Oscillation(ENSO)through ocean biologyinduced heating(OBH)feedbacks are not understood ***,a hybrid coupled model(HCM)for the atmosphere and ocean physics-biogeochemistry(AOPB)in the tropical Pacific is adopted to quantify how ENSO can be modulated by Chl perturbations at interannual and TIW scales,individually or collectively,*** HCM-based sensitivity experiments demonstrate a counteracting effect on ENSO:the bio-climate feedback due to large-scale Chl interannual variability acts to damp ENSO through its impact on upper-ocean stratification and vertical mixing,whereas that due to TIW-scale Chl perturbations tends to amplify *** ENSO simulations are sensitively dependent on the ways Chl effects are represented at these different scales,it is necessary to adequately take into account these related differential Chl effects in climate modeling.A bias source for ENSO simulations is illustrated that is related with the Chl effects in the tropical Pacific,adding in a new insight into interactions between the climate system and ocean ecosystem on different scales in the *** results reveal a level of complexity of ENSO modulations resulting from Chl effects at interannual and TIW scales,which are associated with ocean biogeochemical processes and their interactions with physical processes in the tropical Pacific.

关键词： Ocean chlorophyll Bio-climate feedbacks Interannual variability Tropical instability waves Counteracting effects A hybrid coupled model

Sliding behaviors of the trapezoidal roof rock block under a lateral dynamic disturbance

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第3期16卷 741-760页

作者： feng Dai Wancheng Zhu Min Ren Shunchuan wu Leilei Niu Faculty of Land Resources Engineering Kunming University of Science and TechnologyKunming650093China Center for Rock Instability and Seismicity Research Department of Mining EngineeringSchool of Resource and Civil EngineeringNortheastern UniversityShenyang110819China

The surrounding rock of underground space is always affected by external dynamic disturbance from the side position,such as blasting vibration from a stope at the same level or seismic waves from adjacent strata.A series of laboratory tests,numerical simulations and theoretical analyses were carried out in this study to disclose the sliding mechanism of roof rock blocks under lateral ***,the experiments on trapezoidal key block under various clamping loads and disturbance were conducted,followed by numerical simulations using the fast Lagrangian analysis of continua(FLAC3D).Then,based on the conventional wave propagation model and the classical shear-slip constitutive model,a theoretical model was proposed to capture the relative displacement between blocks and the sliding displacement of the key *** results indicate that the sliding displacement of the key block increased linearly with the disturbance energy and decreased exponentially with the clamping load when the key block was disturbed to slide(without instability).Meanwhile,when the key block was disturbed to fall,two types of instability process may appear as immediate type or delayed *** addition,the propagation of stress waves in the block system exhibited obvious low-velocity and lowfrequency characteristics,resulting in the friction reduction effect appearing at the contact interface,which is the essential reason for the sliding of rock *** results can be applied to practical underground engineering and provide valuable guidance for the early detection and prevention of rockfalling disasters.

关键词： Lateral dynamic disturbance Trapezoidal rock block system Low-velocity and low-frequency wave Friction reduction effect Instability mode

Geometric error measuring,modeling,and compensation for CNC machine tools:A review

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第2期37卷 163-198页

作者： Zhao ZHANG feng JIANG Ming LUO Baohai wu Dinghua ZHANG Kai TANG Engineering Research Center of Advanced Manufacturing Technology for Aero Engine(Northwestern Polytechnical University) Ministry of EducationXi’an 710072China Key Laboratory of High Performance Manufacturing for Aero Engine(Northwestern Polytechnical University) Ministry of Industry and Information TechnologyXi’an 710072China Department of Mechanical and Aerospace Engineering Hong Kong University of Science and TechnologyHong KongChina

Geometric error,mainly due to imperfect geometry and dimensions of machine components,is one of the major error sources of machine *** that geometric error has significant effects on the machining quality of manufactured parts,it has been a popular topic for academic and industrial research for many years.A great deal of research work has been carried out since the 1970s for solving the problem and improving the machining *** have studied how to measure,detect,model,identify,reduce,and compensate the geometric *** paper presents a thorough review of the latest research activities and gives an overview of the state of the art in understanding changes in machine tool performance due to geometric *** advances in measuring the geometrical errors of machine tools are summarized,and different kinds of error identification methods of translational axes and rotation axes are illustrated ***,volumetric geometric error modeling,tracing,and compensation techniques for five-axis machine tools are emphatically ***,research challenges in order to improve the volumetric accuracy of machine tools are also highlighted.

关键词： Error compensation Error identification Error measurement Error modeling Geometric error Machine tools

Achieving near-infrared-light-mediated switchable friction regulation on MXene-based double network hydrogels

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第1期12卷 39-51页

作者： Pengxi wu Cheng ZENG jinglun GUO Guoqiang LIU feng ZHOU Weimin LIU Center of Advanced Lubrication and Sealing Materials State Key Laboratory of Solidification ProcessingNorthwestern Polytechnical UniversityXi’an 710072China State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China

MXene possesses great potential in enriching the functionalities of hydrogels due to its unique metallic conductivity,high aspect ratio,near-infrared light(NIR light)responsiveness,and wide tunability,however,the poor compatibility of MXene with hydrogels limits further *** this work,we report a uniformly dispersed MXene-functionalized poly-N-isopropylacrylamide(PNIPAM)/poly-2-acrylamido-2-methyl-1-propanesulfonic acid(PAMPS)double network hydrogel(M–DN hydrogel)that can achieve switchable friction regulation by using the NIR *** dispersity of MXene in hydrogels was significantly improved by incorporating the chitosan(CS)*** M–DN hydrogel showed much low coefficient of friction(COF)at 25℃ due to the presence of hydration layer on hydrogel *** illuminating with the NIR light,M–DN hydrogel with good photothermal effect rapidly raised the temperature to above the lower critical solution temperature(LCST),which led to an obvious increase of surface COF owing to the destruction of the hydration *** addition,M–DN friction control hydrogel showed good recyclability and controllability by tuning“on-off”of the NIR *** work highlights the construction of functional MXene hydrogels for intelligent lubrication,which provides insight for interface sensing,controlled transmission,and flexible robotic arms.

关键词： MXene dispersion photothermal hydrogel near-infrared(NIR)light friction modulation

Effect of turbulent fluctuation on the ignition of millimeter particle:Experimental studies and numerical modelling with a new correlation of nusselt number Author links open overlay panel

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第8期91卷 168-175页

作者： Lele feng Jie Liu Haihui Xin Liangliang Jiang Yuxin wu Saeideh Babaee Jiangsu Key Laboratory of Coal-based Greenhouse Gas Control and Utilization China University of Mining and TechnologyXuzhou221008China School of Safety Engineering China University of Mining and TechnologyXuzhou221116China Key Laboratory of Hubei Province for Coal Conversion and New Carbon Materials Wuhan University of Science and TechnologyWuhan430000China Department of Chemical and Petroleum Engineering University of CalgaryCalgaryAlbertaCanada Department of Energy and Power Engineering Tsinghua UniversityBeijing100084China Department of Chemical and Metallurgical Engineering University of the WitwatersrandJohannesburgSouth Africa

Understanding the influencing mechanism of turbulent fluctuation on the ignition characteristics of millimeter coal particles is *** this work,to study the effect of turbulent fluctuation on ignition time,millimeter coal particles are subjected to a specific flow field,generated in a furnace with symmetric fans.A one-dimensional model with the new proposed correlation and the Ranz-Marshall(R-M)correlation for Nu(Nusselt number)is established to simulate the coal ignition *** addition,the effects of fan speed,temperature,particle diameter,particle distance and coal type on the ignition time are *** is found that an increase in fan speed from 0 to 3000 rpm leads to a particle Reynolds number Re_(p)increase from 0 to 22.5,and a turbulent particle Reynolds number Re_(t)*increase from 0 to *** a consideration of the fluctuation effect,the new correlation of Nu gives a better prediction of ignition time compared to the R-M ***,the ignition time is revealed to decrease with an increasing fan speed and an elevating *** the ignition time shows merely an initial boost with enlarging particle distance,it exhibits a linearity with the term of particle diameter dp1.3-1.7 and Reynolds numbers(Nu*/Nu)-0.6(Nu*is turbulent Nusselt number).Based on this relationship,the difference of predicted ignition time is calculated at different Re_(p)and Re_(t)*.It is shown that at low Re_(p)or high Re_(t)*values,the new correlation should substitute for the R-M correlation.

关键词： Turbulent fluctuation Particle heat transfer Empirical correlation Coal ignition

Enhancing the mechanical properties of casting eutectic high -entropy alloys via W addition

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1364-1372页

作者： Xu Yang Dezhi Chen Li feng Gang Qin Shiping wu Ruirun Chen National Key Laboratory for Precision Hot Processing of Metals School of Material Science and EngineeringHarbin Institute of TechnologyHarbin 150001China

The effect of W element on the microstructure evolution and mechanical properties of Al_(1.25)CoCrFeNi3 eutectic high-entropy alloy and Al_(1.25)CoCrFeNi_(3-x)W_(x)(x=0,0.05,0.1,0.3,and 0.5;atomic ratio)high-entropy alloys(HEAs)were *** show that the Al_(1.25)CoCrFeNi_(3-x)W_(x) HEAs are composed of face-centered cubic and body-centered cubic(BCC)*** W content increases,the microstructure changes from eutectic to *** addition of W lowers the nucleation barrier of the BCC phase,decreases the valence electron concentration of the HEAs,and replaces Al in the BCC phase,thus facilitating the nucleation of the BCC *** results show that the addition of W greatly improves the mechanical properties,and solid-solution,heterogeneous-interface,and second-phase strengthening are the main strengthening *** yield strength,tensile strength,and elongation of the Al_(1.25)CoCrFeNi2.95W0.05 HEA are 601.44 MPa,1132.26 MPa,and 15.94%,respectively,realizing a balance between strength and *** fracture mode of the Al_(1.25)CoCrFeNi_(3-x)W_(x) HEAs is ductile–brittle mixed fracture,and the crack propagates and initiates in the BCC *** eutectic lamellar structure impedes crack propagation and maintains plasticity.

关键词： high-entropy alloy microstructure mechanical property fracture behavior

Color-polarization synergistic target detection method considering shadow interference

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第7期37卷 50-61页

作者： Bin feng jinpei Xiao Junchao Zhang Lin Li Yunlong wu Qing Ye School of Automation Northwestern Polytechnical UniversityXi'an710072China School of Automation Central South UniversityChangsha410083China State Key Laboratory of Pulsed Power Laser Technology National University of Defense TechnologyHefei230037China

Aiming at the problem of shadow interference in UAV's ground reconnaissance,a color and polarization synergistic target detection method is proposed for anti-shadow interference,based on the influence of two physical characteristics(wavelength and polarization)under different illuminations.A valid fusion strategy is proposed via integrating two separate detection results on color and polarization ***,a local enhancement and recognition module(LER)is introduced to boost the *** on our built dataset,experimental results show that our method achieves mAPof 87.76%,and12.37%higher than that of color image and 14.68%higher than that of polarization image.

关键词： Electro-optical countermeasure Ground reconnaissance Color-polarization Shadow interference Target recognition

Heteroepitaxial growth of Au@Pd core–shell nanocrystals with intrinsic chiral surfaces for enantiomeric recognition

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第1期43卷 225-235页

作者： feng-Xia wu feng-Hua Li Xia-Li Lv Qi-Xian Zhang Guo-Bao Xu Wen-Xin Niu State Key Laboratory of Electroanalytical Chemistry Changchun Institute of Applied ChemistryChinese Academy of SciencesChangchun 130022China Shaoxing Institute of Technology Shanghai UniversityShaoxing 312000China University of Science and Technology of China Hefei 230026China School of Materials Science and Engineering Shanghai UniversityShanghai 200436China Zhejiang Institute of Advanced Materials Shanghai UniversityJiashan 314113China University of Chinese Academy of Sciences Beijing 100039China

Noble metal surfaces with intrinsic chirality serve as an ideal candidate for investigating enantioselective chemistry due to their superior chemical durability and high catalytic ***,significant advance has been made in synthesizing metal nanocrystals with intrinsic ***,the majority reports are limited to ***,through a heteroepitaxial growth strategy,the synthesis of metal nanocrystals with intrinsic chirality to palladium was extended for the first time and their application in enantioselective recognition was *** heteroepitaxial growth strategy allows for transferring the chirality of homochiral Au nanocrystals to Au@Pd core–shell *** employing the chiral Au@Pd nanocrystals as enantiomeric recognizing elements,a series of electrochemical sensors for chiral discrimination were *** optimal conditions,the peak potential between D-dihydroxyphenylalanine(D-DOPA)and L-dihydroxyphenylalanine(L-DOPA)is about 80 m V,and the peak current of D-DOPA is 2 times as much as that of L-DOPA,which enables the determination of the enantiomeric excess(EE,%)of ***,this report not only introduces a heteroepitaxial growth strategy to synthesize metal nanocrystals with intrinsic chirality,but also demonstrates the superior capability of integrating intrinsic chirality and catalytic properties into metal nanocrystals for chiral recognition.

关键词： Core–shell nanostructures Chirality transfer Electrochemical sensors Chiral recognition Chiroplasmonics