检索结果-南通市图书馆

Thermal-driven gigantic enhancement in critical current density of high-entropy alloy superconductors

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第22期189卷 60-67页

作者： jihyun kim Soon-Gil Jung Yoonseok Han Jin Hee kim Jong-Soo Rhyee Sunmog Yeo Tuson Park Department of Physics Sungkyunkwan UniversitySuwon 16419Republic of Korea Department of Physics Education Sunchon National UniversitySuncheon 57922Republic of Korea Department of Applied Physics and Institute of Natural Sciences Integrated Education Institute for Frontier Science and Technology(BK 21 Four)Kyung Hee UniversityYongin17104Republic of Korea Korea Multi-purpose Accelerator Complex Korea Atomic Energy Research InstituteGyeongjuGyeongbuk38180Republic of Korea Center for Quantum Materials and Superconductivity(CQMS) Sungkyunkwan UniversitySuwon 16419Republic of Korea

The high-entropy alloy(HEA)superconductor,Ta_(1/6)Nb_(2/6)Hf_(1/6)Zr_(1/6)Ti_(1/6)(Ta-Nb-Hf-Zr-Ti),is systematically studied to examine changes in superconducting critical properties,critical temperature(T_(c)),critical cur-rent density(J_(c)),and upper critical field(H_(c2)),concerning thermal treatment *** condi-tion affects Jc more significantly than T_(c)and H_(c2),with a large improvement of flux pinning force density(F_(p)).The Jc of bare sample is reduced to 10 A cm^(-2)at an applied magnetic field of approximately 1.5 T,whereas the sample annealed at 550℃for 12 h exhibits J_(c)>100 kA cm^(-2)up to around 4 ***,the Vickers hardness(HVIT)of the Ta-Nb-Hf-Zr-Ti HEA superconductor notably increases from∼384 to 528 HVIT following a 24-h annealing at 500℃.These results demonstrate that thermal annealing is a powerful process to optimize both the superconducting and mechanical properties of high-entropy alloy superconductors.

关键词： High-entropy alloy superconductor Ta-Nb-Hf-Zr-Ti Annealing Critical current density Hardness

Synthesis of stable iodoplumbate and perovskite for efficient annealing-free device and long-term storage

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

SusMat 2023年第6期3卷 821-833页

作者： jihyun kim Sang-Won Park Younghyun Lee Hideo Hosono Byungwoo Park Jinhyun kim Department of Chemical and Materials Engineering University of SuwonHwaseongSouth Korea MDX Research Center for Element Strategy International Research Frontiers InitiativeTokyo Institute of TechnologyYokohamaJapan Department of Materials Science and Engineering Korea Advanced Institute of Science and TechnologyDaejeonSouth Korea Department of Materials Science and Engineering Research Institute of Advanced MaterialsSeoul National UniversitySeoulSouth Korea

As a next-generation photovoltaic device,perovskite solar cells are rapidly ***,both solution and device stability pose challenges for commercialization due to chemical degradation caused by internal and external ***,the decomposition of iodoplumbate in a perovskite solution hinders the long-term use of perovskite ***,the synthesis of stable perovskites at low temperature is important for stable devices and wide applications(flexible devices and high reproducibility).Herein,the critical composition of perovskite is found to obtain high stabilities of both iodoplumbate and perovskite crystals by utilizing CsPbBr_(3) and FAPbI_(3),exhibiting high device performance and long-term solution *** novel composition of CsPbBr_(3)-alloyed FAPbI_(3) not only crystallizes under annealing-free conditions but also demonstrates excellent iodoplumbate stability for 100 days(∼3000 h)without any ***,high device stabilities are achieved over 2000 and 3000 h under extreme conditions of A.M.1.5 and 85℃/85%relative humidity,***,the device exhibited a high power conversion efficiency of 23.4%,and furthermore,CsPbBr_(3)-alloyed FAPbI_(3) was devoted to widen the applications in both flexible and carbon-electrode devices,thereby addressing both scientific depths and potential commercial materials.

关键词： annealing free DFT calculation iodoplumbate long-term stability perovskite solar cells

Development of PLGA micro-and nanorods with high capacity of surface ligand conjugation for enhanced targeted delivery

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Asian Journal of Pharmaceutical Sciences 2019年第1期14卷 86-94页

作者： Jiafu Cao Jin-Seok Choi Murtada A.Oshi Juho Lee Nurhasni Hasan jihyun kim Jin-Wook Yoo College of Pharmacy Pusan National UniversityBusan 46241South Korea Department of Medical Management Chodang UniversityMuan-gun 58530South Korea College of Nanoscience&Nanotechnology Pusan National UniversityBusan 46241South Korea

Particle shape has been recognized as one of the key properties of nanoparticles in biomedical applications including targeted drug *** ability of shape-engineered particles depends largely on targeting ligands conjugated on the particle ***,poor capacity for surface ligand conjugation remains a problem in anisotropic nanoparticles made with biodegradable polymers such as *** this study,we prepared anisotropic PLGA nanoparticles with abundant conjugatable surface functional groups by a film stretching-based fabrication method with poly(ethylene-alt-maleic acid)(PEMA).Scanning electron microscopy images showed that microrods and nanorods were successfully fabricated by the PEMA-based film stretching *** presence of surface carboxylic acid groups was confirmed by confocal microscopy and zeta potential *** the improved film-stretching method,the amount of protein conjugated to the surface of nanorods was increased ***-conjugated,nanorods fabricated by the improved method exhibited higher binding and internalization than unmodified ***,the PEMA-based film-stretching system presented in this study would be a promising fabrication method for non-spherical biodegradable polymeric micro-and nanoparticles with high capacity of surface modifications for enhanced targeted delivery.

关键词： Particle shape PLGA nanoparticles Film-stretching method Surface modification Targeted drug delivery

Two-step generation of induced pluripotent stem cells from mouse fibroblasts using Id3 and Oct4

在线全文

学校读者我要写书评

暂无评论

Journal of Molecular Cell Biology 2012年第1期4卷 59-62页

作者： Jai-Hee Moon June Seok Heo Suhyun Kwon jihyun kim Jihye Hwang Phil Jun Kang Aeree kim Hyun Ok kim Kwang Youn Whang Byung Sun Yoon Seungkwon You Laboratory of Cell Function Regulation College of Life Sciences and BiotechnologyKorea UniversitySeoulRepublic of Korea Cell Therapy Center College of MedicineYonsei UniversitySeoulRepublic of Korea Department of Pathology College of MedicineKorea University Guro HospitalSeoulRepublic of Korea Division of Biotechnology College of Life Sciences and BiotechnologyKorea UniversitySeoulRepublic of Korea

Dear Editor,Somatic cells can be reprogrammed into pluripotent stem cells,called induced pluripotent stem cells(iPSCs),by defined transcription factors(Takahashi et al.,2006).The reprogramming of somatic cells may be a continuous stochastic process in which nearly all somatic donor cells have the ability to give rise to iPSCs with continuous passaging and the expression of defined factors(Hanna et al.,2009).However,the reprogramming process can be divided into discrete stages,including the generation of dedifferentiated pre-pluripotent cells followed by authentic pluripotent cells(Silva et al.,2009).

关键词： pluripotent programming

Heterogeneous Oxidation of Methylene Blue with Surface-Modified Iron-Amended Activated Carbon

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

American Journal of Analytical Chemistry 2013年第7期4卷 115-122页

作者： jihyun R. kim Branden Santiano Hyosang kim Eunsung Kan Department of Molecular Bioscience and Bioengineering University of Hawaii at Manoa Honolulu USA

The present study aims to develop effective adsorption and oxidation of synthetic dye in wastewater by using the newly synthesized iron-amended activated carbon. Recently synthetic dye-containing wastewater has gained more attention due to its mass discharge, high toxicity and low biodegradation. For enhancing adsorption of dye and oxidative regeneration of dye-exhausted activated carbon, the novel amendment of iron-deposited granular activated carbon (GAC) was developed. It was to amend ferrous ion onto the acid-pretreated GAC when pH of iron solution was higher than the pH at point of zero charge (pH, pzc) of the GAC. Methylene blue (MB) in water was adsorbed onto the acid-treated iron- amended GAC (Fe-GAC) followed by single or multiple applications of H2O2. Batch experiments were carried out to study the adsorption isotherm and kinetics indicating adsorption of MB onto the Fe-GAC followed Langmuir isotherm and the pseudo-second order kinetics. The Fe-GACshowed the maximum adsorption capacity (qm) of 238.1 ± 0.78 mg/g which was higher than the virgin GAC with qm of 175.4 ± 13.6 mg/g at 20?C, pH 6 and the initial concentration of 20 - 200 mg/L. The heterogeneous Fenton oxidation of MB in the Fe-GAC revealedthat increasing the H2O2 loading from 7 to 140 mmol H2O2/mmol MB led to enhancing the oxidation efficiency of MB in the GAC from 62.6% to 100% due to the increased generation of hydroxyl radicals. Further enhancement of oxidation of MB in the Fe-GAC was made by the multiple application of H2O2 while minimizing OH radical scavenging often occurring at high concentration of H2O2. Therefore, the acid-treated iron-amended GAC would provide excellent adsorption capacity for MB and high oxidation efficiency of MB in the GAC with multiple applications of H2O2 and optimum iron loading.

关键词： Adsorption Activated Carbon Iron-Amended Activated Carbon Heterogeneous Oxidation Fenton Oxidation Methylene Blue

An oxygenating colloidal bioink for the engineering of biomimetic tissue constructs

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bio-Design and Manufacturing 2024年第3期7卷 240-261页

作者： Seol-Ha Jeong Jarno Hiemstra Patrick V.Blokzijl Rebeca Damian-Ferrara Danilo Martins dos Santos Jéssica H.L.da Fonseca Min-Ho Kang jihyun kim Dilara Yilmaz-Aykut Mei L.L.Cham-Pérez Jeroen Leijten Su Ryon Shin Division of Engineering in Medicine Department of MedicineBrigham and Women’s HospitalHarvard Medical SchoolBostonMA 02139USA Leijten Lab Department of Developmental BioEngineeringFaculty of Science and TechnologyTechnical Medical CentreUniversity of TwenteDrienerlolaan 57522 NB EnschedeThe Netherlands Nanotechnology National Laboratory for Agriculture(LNNA) Embrapa InstrumentaçãoSao CarlosSao Paulo 13560-970Brazil Department of Biomedical-Chemical Engineering The Catholic University of Korea43 Jibong-roBucheon-siGyeonggi-do 14662Republic of Korea Department of Biotechnology The Catholic University of Korea43 Jibong-roBucheon-siGyeonggi-do 14662Republic of Korea

Ensuring a sufficient oxygen supply is pivotal for the success of bioprinting applications since it fosters tissue integration and natural *** in oxygen concentration among diverse tissues necessitates the precise recreation of tissue-specific oxygen levels in imprinted constructs to support the survival of targeted *** oxygen-releasing biomaterials,such as oxygen-generating microparticles(OMPs),have shown promise for enhancing the oxygen supply of microenvironments in injured tissues,whether this approach is scalable for large tissues and whether tissue-specific bioinks with varying OMP concentrations remain printable remain *** study addresses this critical gap by introducing an innovative class of engineered oxygenated bioinks that combine colloidal-based microgels with *** report that incorporating nanosized calcium peroxide(nCaO_(2))and manganese oxide nanosheets(nMnO_(2))into hydrophobic polymeric microparticles enables precise modulation of oxygen release while controlling hydrogen peroxide ***,the fabrication of oxygenating and cytocompatible colloidal gels is achieved using an aqueous two-phase *** study thoroughly evaluates the fundamental characteristics of the resulting bioink,including its rheological behaviors,printability,shape fidelity,mechanical properties,and oxygen release ***,this study demonstrates the macroscopic scalability and cytocompatibility of printed constructs produced via cell-laden oxygenating colloidal *** showcasing the effectiveness of extrusion-based bioprinting,this study underscores how it can be used to fabricate biomimetic tissues,indicating its potential for new *** findings presented here advance the bioprinting field by achieving scalability with both high cell viability and the possibility of mimicking specifically oxygenated *** work thereby offers a promising avenue for the development of functional tissues with e

关键词： 3D bioprinting Bioink Colloidal gels Extrusion printing Oxygen-generating microparticle

“假洋鬼子”·“里通外国的人”·“秃儿。驴”——也谈《阿Q正传》中的“假洋鬼子”

在线全文

学校读者我要写书评

暂无评论

探索与争鸣 2023年第12期 135-141,195页

作者：张全之金智贤上海交通大学人文学院上海200240

阿Q赋予钱大少爷三个称号:一个是“假洋鬼子”,属于诨名;一个是“里通外国的人”,属于罪名;一个是“秃儿。驴”,属于骂名。但历来研究者只重视第一个称号,对后两个一笔带过或避而不谈。事实上,第二个称号内涵丰富。它是清末“汉奸”话... 详细信息

阿Q赋予钱大少爷三个称号:一个是“假洋鬼子”,属于诨名;一个是“里通外国的人”,属于罪名;一个是“秃儿。驴”,属于骂名。但历来研究者只重视第一个称号,对后两个一笔带过或避而不谈。事实上,第二个称号内涵丰富。它是清末“汉奸”话语流布、反洋教运动和义和团运动影响下在民间形成的一个集体想象物,也与阿Q本人的立场和态度有关。骂钱大公子是一个“里通外国的人”,绝不意味着阿Q有一颗爱国心。他对钱大公子的辱骂,只不过是空洞的能指,是搬用的套语,与句子本身的意义相去甚远,与“假洋鬼子”一起构成了一个颇有讽刺意味的表意系统。

关键词：鲁迅阿Q 汉奸假洋鬼子

在线全文

学校读者我要写书评

暂无评论

与机器交流:人机传播领域的未来轨迹

全球传媒学刊 2024年第1期11卷 71-105页

作者： jihyun kim Katrin Etzrodt Andrew Prahl Chad Edwards 刘力铭(翻译) 美国中佛罗里达大学科尔森传播与媒体学院国际传播学会人机传播分会德国德累斯顿工业大学媒体与传播研究所新加坡南洋理工大学黄金辉传播与信息学院美国西密歇根大学传播学院清华大学新闻与传播学院

机器行为者(machine actor)融入日常生活的现象不仅模糊了人机之间的界限,更带来了机遇和挑战。在此背景下,人机传播研究立足前沿,探索新兴的人机互动现象。这个由机器驱动的时代正在快速发展,本研究展望未来,讨论人机传播领域如何继续... 详细信息

机器行为者(machine actor)融入日常生活的现象不仅模糊了人机之间的界限,更带来了机遇和挑战。在此背景下,人机传播研究立足前沿,探索新兴的人机互动现象。这个由机器驱动的时代正在快速发展,本研究展望未来,讨论人机传播领域如何继续发展和扩展其研究范式。具体而言,本研究深入探讨人机传播的理论基础和方法论,考量以社会临场感和信任为中心的两个研究前沿,从不同角度探讨人机传播的重要意义并对人机传播未来的研究提出方向。

关键词：人机传播机器人人工智能社会临场感信任

Vacuum-free lamination via controlled polymer adhesion for selective photogeneration and photodetection

在线全文

学校读者我要写书评

暂无评论

Carbon Energy 2024年第7期6卷 205-218页

作者： Min Soo kim jihyun Lim Woongsik Jang Dong Hwan Wang Department of Intelligent Semiconductor Engineering Chung-Ang UniversitySeoulRepublic of Korea School of Integrative Engineering Chung-Ang UniversitySeoulRepublic of Korea

This study attempts to develop a reproducible thin-film formation technique called vacuum-free(VF)lamination,which transfers thin films using elastomeric polymer-based laminating ***,by controlling the interface characteristics of the mediator based on the work of adhesion,VF lamination is successfully performed for various thicknesses(from 20 to 240 nm)of a conjugated photoactive material composed of poly[(2,6-(4,8-bis(5-(2-ethylhexyl-3-fluoro)thiophen-2-yl)-benzo[1,2-b:4,5-bʹ]dithiophene))-alt-(5,5-(1ʹ,3ʹ-di-2-thienyl-5ʹ,7ʹ-bis(2-ethylhexyl)benzo[1ʹ,2ʹ-c:4ʹ,5ʹ-cʹ]dithiophene-4,8-dione)](a polymer donor)and 2,2ʹ-((2Z,2ʹZ)-((12,13-bis(2-butyloctyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2ʹʹ,3ʹʹ:4ʹ,5ʹ]thieno[2ʹ,3ʹ:4,5]pyrrolo[3,2-g]thieno[2ʹ,3ʹ:4,5]thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile(a nonfullerene acceptor).Interestingly,the organic photovoltaic and photodetecting applications,prepared by the VF lamination process,showed superior performance compared to those of devices prepared by conventional *** is due to the overturned surface morphology,which led to enhanced charge transport ability and blocking of the externally injected ***,the reproducible VF lamination process,exploiting an adhesion-based elastomeric polymer mediator,is a promising thin-film formation technique for developing efficient next-generation organic optoelectronic materials consistent with the solution process.

关键词： conjugated nonfullerene acceptor photodetectors photovoltaics polymer vacuum-free lamination