检索结果-南通市图书馆

A preliminary site selection system for underground hydrogen storage in salt caverns and its application in Pingdingshan,China

引用

Deep Underground Science and Engineering 2024年第1期3卷 117-128页

作者： Liangchao Huang Yanli Fang Zhengmeng Hou Yachen Xie Lin Wu jiashun Luo Qichen Wang Yilin guo Wei Sun Sino‐German Research Institute of Carbon Neutralization and Green Development Zhengzhou UniversityZhengzhouChina Institute of Subsurface Energy Systems Clausthal University of TechnologyClausthal ZellerfeldGermany Research Centre of Energy Storage Technologies Clausthal University of TechnologyGoslarGermany Sino‐German Energy Research Center Sichuan UniversityChengduChina State Key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhanChina Faculty of Land and Resources Engineering Kunming University of Science and TechnologyKunmingChina

Large‐scale underground hydrogen storage(UHS)provides a promising method for increasing the role of hydrogen in the process of carbon neutrality and energy transition.Of all the existing storage deposits,salt caverns are recognized as ideal sites for pure hydrogen storage.Evaluation and optimization of site selection for hydrogen storage facilities in salt caverns have become significant issues.In this article,the software CiteSpace is used to analyze and filter hot topics in published research.Based on a detailed classification and analysis,a“four‐factor”model for the site selection of salt cavern hydrogen storage is proposed,encompassing the dynamic demands of hydrogen energy,geological,hydrological,and ground factors of salt mines.Subsequently,20 basic indicators for comprehensive suitability grading of the target site were screened using the analytic hierarchy process and expert survey methods were adopted,which provided a preliminary site selection system for salt cavern hydrogen storage.Ultimately,the developed system was applied for the evaluation of salt cavern hydrogen storage sites in the salt mines of Pingdingshan City,Henan Province,thereby confirming its rationality and effectiveness.This research provides a feasible method and theoretical basis for the site selection of UHS in salt caverns in China.

关键词： analytic hierarchy process(AHP) evaluation index hydrogen storage salt cavern site selection

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental study and simulation of a three-phase flow stirred bioreactor

引用

Chinese Journal of Chemical Engineering 2019年第3期27卷 649-659页

作者： Chenghui Zheng jiashun guo Chengkai Wang Yuanfeng Chen Huidong Zheng Zuoyi Yan Qinggen Chen School of Chemical Engineering Fuzhou University Fujian Provincial Academy of Environmental Science Xiamen Zijin Mining & Metallurgy Technology Co.Ltd.

In order to obtain the reasonable operating conditions and minimize the power consumption in the stirred bioreactor, the hydrodynamic experiments in the stirred bioreactor have been taken to obtain the basic data. Subsequently, an Eulerian model for the gas–liquid–solid three phase flow in the stirred bioreactor has been proposed and the CFD simulation has been conducted. By comparing the results of experiment and simulation, it can be concluded that the simulation results were consistent with the experimental data. The inner relationship between operating variables and indicators could be obtained by comparing the results of just suspension speed, gas holdup, power consumption and operational maps, further the reasonable operating conditions could be also determined under the minimum power consumption. The operational maps could provide the theoretical foundation for industrial application of the gas–liquid–solid stirred bioreactors under the low solid concentration(no more than 20 wt%).

关键词： Stirred bioreactor Hydrodynamics experiment Simulations Operational maps

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of Tooth Profile Modification on Vibration of Power Split Gear Transmission System

引用

Journal of Harbin Institute of Technology(New Series) 2016年第3期23卷 61-68页

作者： Jincheng Dong Sanmin Wang jiashun guo He Lin School of Mechanical Engineering Northwestern Polytechnical University

Based on Newton ' s second law,the bend-torsion-shaft coupling nonlinear dynamic model and equations of power split gear transmission system are established.According to the principle of tooth profile modification,the tooth profile modification is considered as time-varying gear backlash function acting along the line of action.Then the dynamic functions are solved by using Runge-Kutta numerical method.After analyzing the effect of tooth profile modification quantity( TPMQ) and relative tooth profile modification length( TPML) to the nonlinear dynamic characteristics of power split gear transmission,the following conclusions are drawn:1 The TPMQ of a certain stage transmission affects the vibration of its own stage more significantly than the other stage,and the coupling effect between two stages can be ignored usually in the modification design;2 If the first stage TPMLs are less than 0.3,the influence of the first stage TPMLs to the first stage transmission vibration is much more greatly than the influence of the second stage TPMLs to the first stage transmission vibration,or else both the first and second stage TPMLs affect the first stage transmission vibration largely.The same is true for the second stage TPMLs,and the cutoff value is 0.2;3 The TPMQ affects the vibration of power split gear transmission system more principally than the TPML,and should be top-priority in the modification design.

关键词： power split gear transmission system tooth profile modification nonlinear dynamic characteristics time-varying gear backlash function

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Adhesion and corrosion resistance of polycaprolactone coating on NiTi alloy surface after alkali heat pretreatment

引用

Biosurface and Biotribology 2022年第4期8卷 307-314页

作者： Zhihui Zhang Yanan Yang Yunting guo Pengwei Sha Zezhou Xu Zhenglei Yu jiashun Si Zhengao Zhang Jia guo Yifan Chen Key Laboratory of Bionic Engineering Ministry of EducationJilin UniversityChangchunChina Weihai Institute for Bionic Jilin UniversityWeihaiChina State Key Laboratory of Automotive Simulation and Control Jilin UniversityChangchunChina Beijing Reserarch Institute of Automation for Machinery Industry Co. LtdBeijingChina Key Laboratory of Automobile Materials Ministry of EducationCollege of Materials Science and EngineeringJilin UniversityChangchunChina

Selective laser melting of nickel-titanium alloy(SLM-NiTi)can precisely control the size of the sample molding structure and has attracted extensive attention due to its special superelasticity and shape memory effect.However,the biological inertness and poor corrosion resistance of SLM-NiTi alloy limit their wide application as biomedical implant materials.In this study,polycaprolactone(PCL)coating was prepared on SLM-NiTi alloy by dipping and pulling method,and the effects of alkali heat pretreatment on the morphology,adhesion,corrosion resistance,long-term stability and biomineralisation of the PCL coatings were investigated.The results showed that PCL coating can substan-tially improve the performance of SLM-NiTi alloy,and the PCL coating after alkali heat pretreatment has higher adhesion(increased from 1,747 to 2,498 mN)and lower corrosion current density(reduced by about an order of magnitude compared to PCL coating alone).In addition,the necessary stability,biomineralisation and biocompatibility ability of coatings were also further improved.Therefore,the alkali heat pretreated PCL-coated SLM-NiTi alloy has good application prospects in implants due to its superior properties.

关键词： adhesion alkali heat pretreatment corrosion resistance PCL coating SLM-NiTi alloy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Solution Domain Boundary Analysis Method and Its Application in Parameter Spaces of Nonlinear Gear System

引用

Chinese Journal of Mechanical Engineering 2011年第3期24卷 507-513页

作者： LIU Haixia WANG Sanmin guo jiashun ZHENG Yuqi School of Mechatronics Northwestern Polytechnical University Xi ＇an 710072 China

Mastering the influence laws of parameters on the solution structure of nonlinear systems is the basis of carrying out vibration isolation and control.Many researches on solution structure and bifurcation phenomenon in parameter spaces are carried out broadly in many fields,and the research on nonlinear gear systems has attracted the attention of many scholars.But there is little study on the solution domain boundary of nonlinear gear systems.For a periodic non-autonomous nonlinear dynamic system with several control parameters,a solution domain boundary analysis method of nonlinear systems in parameter spaces is proposed,which combines the cell mapping method based on Poincaré point mapping in phase spaces with the domain decomposition technique of parameter spaces.The cell mapping is known as a global analysis method to analyze the global behavior of a nonlinear dynamic system with finite dimensions,and the basic idea of domain decomposition techniques is to divide and rule.The method is applied to analyze the solution domain boundaries in parameter spaces of a nonlinear gear system.The distribution of different period domains,chaos domain and the domain boundaries between different period domains and chaotic domain are obtained in control parameter spaces constituted by meshing damping ratio with excitation frequency,fluctuation coefficient of meshing stiffness and average exciting force respectively by calculation.The calculation results show that as the meshing damping increases,the responses of the system change towards a single motion,while the variations of the excitation frequency,meshing stiffness and exciting force make the solution domain presenting diversity.The proposed research contribution provides evidence for vibration control and parameter design of the gear system,and confirms the validity of the solution domain boundary analysis method.

关键词： control parameter space solution domain boundary analysis period domain chaos domain

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preparation and Properties of Polyvinyl Chloride/Carbon Nanotubes Composite

引用

Journal of Wuhan University of Technology(Materials Science) 2019年第3期34卷 516-520页

作者：陶家顺秦玉军 ZHANG Pu 郭志新 Department of Chemistry Renmin University of China

Chemically functionalized carbon nanotubes were combined with PVC to enhance both toughness and strength by simply mixing long alkyl chain modified multi-wall carbon nanotubes (abbreviated as MWNTs) or Ester-functionalized soluble MWNTs (abbreviated as eMWNTs) with PVC in Tetrahydrofuran (THF)/Cyclohexanone (CH) solution to obtain good dispersity solution. The MWNTs modified with 1-Bromohexadecane can effectively increase the intermolecular force with PVC by hydrogen bond. The obtained nanocomposite has a regular shape with homogeneously dispersed particles. PVC/2 wt% eMWNTs has been proved to possess excellent thermal stability. The intermolecular force between eMWNTs and PVC endows the as-fabricated nanocomposite with enhanced toughness and strength, indicating that our method is promising for wide use in PVC/eMWNTs nanocomposition.

关键词： polyvinyl chloride (PVC) toughness and strength MWNTs

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

弧齿锥齿轮大重合度设计及啮合性能对比

引用

机械传动 2022年第2期46卷 60-65,95页

作者：苏进展魏刚杨羽常乐浩郭家舜长安大学道路施工技术与装备教育部重点实验室陕西西安710064

为了改善弧齿锥齿轮啮合性能,提出了一种接触路径沿齿长方向的大重合度设计新方法。预置弧齿锥齿轮副的设计重合度和传动误差幅值及对称性,通过迭代优化局部综合参数,获得内对角和沿齿长的大重合度齿面印痕。借助齿面接触分析和轮齿承... 详细信息

为了改善弧齿锥齿轮啮合性能,提出了一种接触路径沿齿长方向的大重合度设计新方法。预置弧齿锥齿轮副的设计重合度和传动误差幅值及对称性,通过迭代优化局部综合参数,获得内对角和沿齿长的大重合度齿面印痕。借助齿面接触分析和轮齿承载接触分析,进行了两种大重合度设计在轮齿强度和承载传动误差上的比较。算例表明,接触路径沿齿长方向的大重合度设计在小轮、大轮弯曲强度和齿面接触强度上,分别提高了13.67%、10.05%和5.77%,承载传动误差幅值下降了31.32%,并且能够改善齿面印痕对安装误差的敏感性。

关键词：弧齿锥齿轮大重合度接触印痕轮齿强度误差敏感性

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

不同类型人工林下土壤斥水性的变化

引用

中南林业科技大学学报 2022年第3期42卷 136-142页

作者：彭家顺雷开敏兰龙焱牛德奎郭晓敏刘晓君江西农业大学江西省森林培育重点实验室江西南昌330045

【目的】土壤斥水性是普遍存在的,通过研究不同类型人工林下的土壤,探究土壤斥水性的变化规律以及影响因素,为人工林的栽培提供理论依据。【方法】选择栽培时间为10年的竹阔混交林、乔灌混交林和针阔混交林,并将草地作为对照组,利用滴... 详细信息

【目的】土壤斥水性是普遍存在的,通过研究不同类型人工林下的土壤,探究土壤斥水性的变化规律以及影响因素,为人工林的栽培提供理论依据。【方法】选择栽培时间为10年的竹阔混交林、乔灌混交林和针阔混交林,并将草地作为对照组,利用滴水穿透时间法测定各混交林以及草地的土壤斥水性。比较不同类型人工林以及草地下的土壤之间的差异,并分析土壤斥水性与土壤理化性质以及林分特征之间的关系。【结果】研究结果表明除了针阔混交林下的土壤,各个样地内不同土层土壤的WDPT值随着土壤含水率的增加都具有一个显著峰值,草地、竹阔混交林、乔灌混交林的上层和下层土壤分别在含水率为200、210、190、120、170和140 g·kg^(-1)时达到峰值,草地和竹阔混交林上层和下层以及乔灌混交林的上层土壤表现出斥水性的含水率范围分别为70~220、180~220、120~200、90~140和160~180 g·kg^(-1)。土壤斥水性与土壤pH值、砂粒、粉粒、容重呈显著正相关关系,与有机质、黏粒、郁闭度、物种丰富度、土壤持水能力呈显著负相关关系。【结论】土壤斥水性与林分特征、土壤理化性质显著相关,林分结构越复杂,土壤级配越良好,持水能力越强,土壤斥水性越弱。随着土壤含水率的逐渐增大,斥水性的变化曲线呈单峰状。土壤的持水能力越强,表现出斥水性的含水率范围越小。

关键词：土壤斥水性 WDPT 人工林土壤理化性质

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

不同刨花楠种植模式对土壤理化性质及分形维数的影响

引用

中南林业科技大学学报 2022年第1期42卷 111-119页

作者：彭家顺雷开敏郭晓敏牛德奎刘晓君兰龙焱江西农业大学林学院江西南昌330045 江西农业大学森林培育重点实验室江西南昌330045

【目的】分析不同刨花楠种植模式对土壤分形维数和可蚀性以及土壤理化性质的影响,为刨花楠复合种植提供理论依据。【方法】选取婺源生态林场近自然恢复条件下2年生刨花楠纯林(A)、2年生刨花楠-8年生杉木混交林(B)、8年生刨花楠-8年生杉... 详细信息

【目的】分析不同刨花楠种植模式对土壤分形维数和可蚀性以及土壤理化性质的影响,为刨花楠复合种植提供理论依据。【方法】选取婺源生态林场近自然恢复条件下2年生刨花楠纯林(A)、2年生刨花楠-8年生杉木混交林(B)、8年生刨花楠-8年生杉木混交林(C)、8年生刨花楠-8年生湿地松混交林(D)和8年生刨花楠纯林(E)5种刨花楠种植模式,各模式3个重复,共15块样地,进行了野外调查取样,分析不同刨花楠种植模式下土壤分形维数和可蚀性以及理化性质之间的差异。【结果】各种植模式土壤有机质、全氮、全磷和全钾含量的均值分别为15.77~42.50、0.85~2.01、0.69~1.38和7.84~10.17 g/kg。综合来看,B模式土壤的养分状况较其他模式更加优良。土壤分形维数与砂粒、黏粒、全氮以及全磷含量有显著相关性(P0.05),说明随着林龄的增加,土壤的分形维数逐渐增大。【结论】刨花楠混交林并不能改善土壤养分状况;种植年限和土壤机械组成对土壤分形维数影响较显著,但土壤可蚀性大小仅与机械组成有关;土壤分形维数和可蚀性均能较好地指征土壤理化性质。

关键词：土壤机械组成土壤分形维数土壤可蚀性种植模式刨花楠

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

大重合度弧齿锥齿轮设计与分析

引用

西安交通大学学报 2021年第3期55卷 117-125页

作者：苏进展魏刚杨羽常乐浩郭家舜长安大学道路施工技术与装备教育部重点实验室西安710064

为改善弧齿锥齿轮啮合性能,提出一种接触路径沿齿长方向的大重合度设计方法。预置沿齿长的接触路径和对称抛物线传动误差,以大轮作为假想插齿刀,共轭展成小轮辅助齿面;先计算沿接触路径的齿面修形量,再根据轻载的弹性变形量和接触椭圆... 详细信息

为改善弧齿锥齿轮啮合性能,提出一种接触路径沿齿长方向的大重合度设计方法。预置沿齿长的接触路径和对称抛物线传动误差,以大轮作为假想插齿刀,共轭展成小轮辅助齿面;先计算沿接触路径的齿面修形量,再根据轻载的弹性变形量和接触椭圆长半轴,计算出沿接触线齿面网格点的修形量,将两者叠加到小轮辅助齿面上获得小轮目标齿面;借助遗传算法求解目标齿面所对应的小轮加工参数。通过算例表明,将接触路径设计为沿齿长方向能够获得大重合度,且重合度仅与齿宽有关,沿齿宽中线的接触路径能够获得更好的啮合性能,避免过早发生边缘接触;齿面印痕沿齿向分布,避免内对角接触,减小齿面相对滑动速度,且在安装误差作用下,齿面印痕沿着齿高方向移动。

关键词：弧齿锥齿轮大重合度齿面印痕滑动速度齿面修形

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：