检索结果-南通市图书馆

High strength mullite-bond SiC porous ceramics fabricated by digital light processing

Journal of Advanced Ceramics 2024年第1期13卷 53-62页

作者： Jian Sun Jingde Zhang Xu Zhang Zihe li jianzhang li Sijie Wei Weibin Zhang Weili Wang Guifang Han Key Laboratory for liquid-Solid Structural Evolution and Processing of Materials(Ministry of Education) School of Materials Science and EngineeringShandong UniversityJinan 250061China Key Laboratory of Special Functional Aggregated Materials Ministry of EducationShandong UniversityJinan 250100China Materials and Structures Research Centre Department of Mechanical EngineeringUniversity of BathBath BA27AYUK National Engineering Research Centre of Ceramic Matrix Composite Manufacture Technology Xi’an Golden Mountain Ceramic Composites Co.Ltd.Xi’an 710118China School of Physics and Materials Science Changji UniversityChangji 831100China

Fabricating SiC ceramics via the digital light processing(DLP)technology is of great challenge due to strong light absorption and high refractive index of deep-colored SiC powders,which highly differ from those of resin,and thus significantly affect the curing performance of the photosensitive SiC slurry.In this paper,a thin silicon oxide(SiO_(2))layer was in-situ formed on the surface of SiC powders by pre-oxidation treatment.This method was proven to effectively improve the curing ability of SiC slurry.The SiC photosensitive slurry was fabricated with solid content of 55 vol%and viscosity of 7.77 Pa·s(shear rate of 30 s^(−1)).The curing thickness was 50μm with exposure time of only 5 s.Then,a well-designed sintering additive was added to completely convert low-strength SiO_(2) into mullite reinforcement during sintering.Complexshaped mullite-bond SiC ceramics were successfully fabricated.The flexural strength of SiC ceramics sintered at 1550℃in air reached 97.6 MPa with porosity of 39.2 vol%,as high as those prepared by spark plasma sintering(SPS)techniques.

关键词： digital light processing(DLP) SiC ceramics pre-oxidation mullite-bond SiC mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nucleophilic amino acids as a renewable alternative to petrochemically-derived amines in glycerol epoxy resins

引用

Journal of Bioresources and Bioproducts 2024年第2期9卷 222-232页

作者： Yunyi liang Yonghong Luo Yingji Wu Xiaona li Quyet Van Le jianzhang li Changlei Xia Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources International Innovation Center for Forest Chemicals and MaterialsCollege of Materials Science and EngineeringNanjing Forestry UniversityNanjing 210037China Department of Materials Science and Engineering Institute of Green Manufacturing TechnologyKorea UniversitySeoul 02841South Korea

The standard epoxy resin curing agents revealed are from unsustainable petroleum-based sources,which produce poisonous exhaust when cured.Amino acids,a bio-based epoxy curing agent with amino and carboxyl groups,are another potential curing agent.Water-soluble epoxy resins cured with lysine(Lys),glutamic acid(Glu),leucine(Leu),and serine(Ser)as amino acids were inves-tigated.The results showed that the water-soluble epoxy resin(glycerol epoxy resins,GER)was cured with Lys and Glu after reacting.Fourier transform infrared(FT-IR)spectroscopic analysis of the GER-Lys showed that the amino and carboxyl groups of Lys primarily reacted with the epoxy groups of GER.The elongation at break of Lys-cured GER(GER-Lys)cured at 70℃ with a molar ratio of 1꞉0.75 was 75.32%.The fact that elongations at break of GER-Lys(79.43%)were higher than those of GER-Glu(17.33%),respectively supports the decrease of crosslinking density by the amino acid-cured GER reaction.The potential of Lys and Glu alternatives for petrochemical amines is demonstrated and provides promising opportunities for industrial application.

关键词： Curing agent Amino acids Bio-based epoxy resins Lysine Glutamic acid

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A bifunctional wood membrane modified by MoS_(2)/covalent organic framework heterojunctions for effective solar-driven water evaporation and contaminant degradation

引用

Science China Chemistry 2024年第6期67卷 2111-2120页

作者： Ziwei Cui Jianfei Wu Haoran li Yaning Xu Tiantian Wu lixing Kang Qing Huang Yahui Cai jianzhang li Dan Tian Co-Innovation Center of Efficient Processing and Utilization of Forest Resources College of Materials Science and EngineeringNanjing Forestry UniversityNanjing210037China Key Laboratory of Multifunctional Nanomaterials and Smart Systems Suzhou Institute of Nano-Tech and Nano-BionicsChinese Academy of SciencesSuzhou215123China State Key Laboratory of Efficient Production of Forest Resources Beijing Forestry UniversityBeijing100083China

Interfacial solar evaporation technology is considered one of the most promising strategies for alleviating the scarcity of freshwater resources.However,solar-driven evaporation technology cannot eliminate the pollutants in the residual wastewater.To solve this problem,we have prepared a two-in-one solar-driven evaporation/photocatalysis system by decorating MoS_(2)/covalent organic framework(COF)heterojunctions on wood(MoS_(2)/COF-wood).Thanks to the unique porous structure of wood,it provides a strong guarantee for water transport and vapor release during the evaporation process.The introduction of MoS_(2) and COFs can promote the breaking of hydrogen bonds between water molecules,which leads to a significant decrease in the enthalpy of evaporation,achieving a water evaporation rate as high as 2.17 kg m^(-2)h^(-1)under 1 sun irradiation.Meanwhile,the resulting MoS_(2)/COF-wood exhibits good salt resistance and reusability.In addition,the heterojunctions formed between COFs and MoS_(2) can effectively inhibit charge carrier complexation and improve the photocatalytic degradation ability of pollutants(over 99%).This study highlights the construction strategy of bifunctional wood-based materials for freshwater production and wastewater remediation.

关键词： covalent organic framework MoS_(2) wood photocatalysis solar-driven evaporation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A bifunctional wood membrane modified by MoS/covalent organic framework heterojunctions for effective solar-driven water evaporation and contaminant degradation

引用

Science China Chemistry 2024年

作者： Ziwei Cui Jianfei Wu Haoran li Yaning Xu Tiantian Wu lixing Kang Qing Huang Yahui Cai jianzhang li Dan Tian State Key Laboratory of Efficient Production of Forest Resources Beijing Forestry University Key Laboratory of Multifunctional Nanomaterials and Smart Systems Suzhou Institute of Nano-Tech and Nano-BionicsChinese Academy of Sciences Co-Innovation Center of Efficient Processing and Utilization of Forest Resources College of Materials Science and EngineeringNanjing Forestry University

Interfacial solar evaporation technology is considered one of the most promising strategies for alleviating the scarcity of freshwater resources. However, solar-driven evaporation technology cannot eliminate the pollutants in the residual wastewater.To solve this problem, we have prepared a two-in-one solar-driven evaporation/photocatalysis system by decorating MoS2/covalent organic framework (COF) heterojunctions on wood (MoS2/COF-wood). Thanks to the unique porous structure of wood, it provides a strong guarantee for water transport and vapor release during the evaporation process. The introduction of MoS2and COFs can promote the breaking of hydrogen bonds between water molecules, which leads to a significant decrease in the enthalpy of evaporation, achieving a water evaporation rate as high as 2.17 kg m-2h-1under 1 sun irradiation. Meanwhile,the resulting MoS2/COF-wood exhibits good salt resistance and reusability. In addition, the heterojunctions formed between COFs and MoS2can effectively inhibit charge carrier complexation and improve the photocatalytic degradation ability of pollutants (over 99%). This study highlights the construction strategy of bifunctional wood-based materials for freshwater production and wastewater remediation.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Research Progress of Soybean Protein Adhesive:A Review

引用

Journal of Renewable Materials 2022年第10期10卷 2519-2541页

作者： Yantao Xu Yufei Han jianzhang li Jing Luo Sheldon QShi Jingchao li Qiang Gao An Mao MOE Key Laboratory of Wooden Material Science and Application&Beijing Key Laboratory of Wood Science and Engineering Beijing Forestry UniversityBeijing100083China College of Materials Science and Engineering Nanjing Forestry UniversityNanjing210037China College of Engineering Department of Mechanical and Energy Engineering University of North TexasDenton76203USA State Forestry and Grassland Administration Key Laboratory of Silviculture in Downstream Areas of the Yellow River College of ForestryShandong Agricultural UniversityTai’an271000China

Traditional formaldehyde-based adhesives rely excessively on petrochemical resources,release toxic gases,and pollute the environment.Plant-derived soybean protein adhesives are eco-friendly materials that have the potential to replace the formaldehyde-based adhesives used to fabricate wood-based panels.However,the poor water resistance,high brittleness,and poor mildew resistance of soybean protein adhesives limit their industrial applications.This article reviews recent research progress in the modification of soybean protein adhesives for improving the bonding performance of adhesives used for wood-based panel fabrication.Modification methods were summarized in terms of water resistance,solid content,and mildew resistance.The modification mechanisms and remaining problems were also discussed.Finally,the current industrial applications and the future research direction of soybean protein adhesives are discussed.

关键词： Soybean protein adhesive bonding performance water resistance solid content mildew resistance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Flexible,durable,and anti-fouling nanocellulose-based membrane functionalized by block copolymer with ultra-high flux and efficiency for oil-in-water emulsions separation

引用

Nano Research 2023年第4期16卷 5665-5675页

作者： Jianfei Wu Yuxuan Su Ziwei Cui Yang Yu Jiafu Qu Jundie Hu Yahui Cai jianzhang li Dan Tian Qichun Zhang Co-Innovation Center of Efficient Processing and Utilization of Forest Resources College of Materials Science and EngineeringNanjing Forestry UniversityNanjing 210037China School of Materials Science and Engineering Suzhou University of Science and TechnologySuzhou 215009China Department of Materials Science and Engineering&Center of Super-Diamond and Advanced Films(COSDAF) City University of Hong KongHong Kong 999077China

The clearwater obtained from stabilized oily wastewater has become a worldwide challenge.Nowdays,the area of oil/water emulsion separation materials have accomplished great progress,but still faces the enormous problems of low flux,poor stability,and pollution resistance.Nanocelluloses(cellulose nanocrystals(CNC))with the advantages of hydrophilicity,ecofriendliness,and regeneration are ideal materials for the construction of separation membranes.In this paper,a flexible,antifouling,and durable nanocellulose-based membrane functionalized by block copolymer(poly(N-isopropylacrylamide)-b-poly(N,Ndimethylaminoethyl methacrylate))is prepared via chemical modification and self-assembly,showing high separation efficiency(above 99.6%)for stabilized oil-in-water emulsions,excellent anti-fouling and cycling stability,high-temperature resistance,and acid and alkali resistance.More importantly,the composite membrane has ultra-high flux in separating oil-in-water emulsions(29,003 L·m^(−2)·h^(−1)·bar^(−1))and oil/water mixture(51,444 L·m^(−2)·h^(−1)·bar^(−1)),which ensures high separation efficiency.With its durability,easy scale-up,and green regeneration,we envision this biomass-derived membrane will be an alternative to the existing commercial filter membrane in environmental remediation.

关键词： nanocellulose-based membrane oil/water emulsions separation ultra-high flux good durability anti-fouling property

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Soy Protein-Based Composite Film with a Hierarchical Structure Inspired by Nacre

引用

Journal of Renewable Materials 2022年第3期10卷 639-652页

作者： Yecheng Xu Chaojie Xu Mingsong Chen jianzhang li ling Zeng Jing Luo Qiang Gao Sheldon Q.Shi Beijing Key Laboratory of Wood Science and Engineering&MOE Key Laboratory of Wooden Material Science and Application Beijing Forestry UniversityBeijing100083China Nanning SCISKY Waterborne Technologies Co. Ltd.Nanning530105China College of Materials Science and Engineering Nanjing Forestry UniversityNanjing210037China College of Engineering Department of Mechanical and Energy EngineeringUniversity of NorthTexasDenton76207-7102USA

Soy protein-based composite film is a potential replacement for petroleum-based film with multipurpose applica-tions and cleaner production.It is difficult to improve both the tensile strength and toughness of a protein-based film without sacrificing its elongation.In this study,inspired by the hierarchical structure of nacre,a facile yet delicate strategy was developed to fabricate a novel bio-based film with excellent toughness and high strength.Triglycidylamine(TGA)crosslinked soy protein(SPI)as hard phase and thermoplastic polyurethane elastomer(TPU)as soft phase comprise an alternative lay-up hierarchical structure.The interface of these two phases is enhanced using triglycidylamine(TGA)surface-modified TPU(MTPU).The tensile strength of SPI/MTPU/TGA films increases by 392%to 7.78 MPa and their toughness increases by 391%to 8.50 MJ/m^(3) compared to soy protein/glycerol film.The proposed hierarchical structure can also be extended to other high-performance materials and polymers.

关键词： Soy protein-based composite film hierarchical structure TPU enhancement mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

木材胶黏剂仿生改性研究进展

引用

材料导报 2024年第8期38卷 270-276页

作者：崔政李京超李建章高强北京林业大学木质材料科学与应用教育部重点实验室木材科学与工程北京市重点实验室北京100083

目前,利用无醛胶黏剂替代醛类树脂胶黏剂制备人造板产品成为木材胶黏剂研究热点,符合国家可持续发展和“双碳”战略。生物仿生为木材胶黏剂的改性和性能提升提供了设计灵感,是一种新兴且有效的改性策略。通过仿生设计与改性,无醛木材胶... 详细信息

目前,利用无醛胶黏剂替代醛类树脂胶黏剂制备人造板产品成为木材胶黏剂研究热点,符合国家可持续发展和“双碳”战略。生物仿生为木材胶黏剂的改性和性能提升提供了设计灵感,是一种新兴且有效的改性策略。通过仿生设计与改性,无醛木材胶黏剂的耐水性、防霉性、涂布预压性等得到显著提升的同时可以赋予胶黏剂功能性,是木材工业研究热点之一。本文综述了无醛木材胶黏剂仿生改性研究进展,按照仿生原理分为生物化学仿生木材胶黏剂(包括灵感来源于贻贝湿态黏附或模拟生物矿化、细胞壁构筑和重组键合网络过程等)以及结构仿生木材胶黏剂(包括灵感来源于壁虎脚趾微纳刷状结构、蜘蛛丝微相分离结构、珍珠层“砖和砂浆”结构、墨鱼骨多孔结构、弹簧螺旋结构等)。重点介绍了仿生原理、配方设计、胶黏剂性能和潜在应用价值,以期为木材胶黏剂的开发与高附加值利用提供参考。

关键词：无醛木材胶黏剂仿生性能功能性

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The Research Application of 3D Laser Scanning Technology in the Deformation Detection of Large Cylindrical Oil Tank

引用

Journal of Architectural Research and Development 2022年第3期6卷 14-20页

作者： Wenxue Lv jianzhang li Faculty of Geomatics Lanzhou Jiaotong University Lanzhou 730070China Gansu Provincial Engineering Laboratory for National Geographic State Monitoring Lanzhou 730070China

In order to ensure the safety in using a large cylindrical storage tank,it is necessary to regularly detect its defonnatioii.The traditional total station method has high accuracy in determining the deformation,however,it has a low measxirement efficiency.Long-term observation means,there are more risks in the petrochemical plant,therefore,this paper proposes the usage of the 3D laser scanner,replacing the traditional total station to determine the defbnnation of a large cylindrical storage tank.The Matlab program,is compiled to calculate the point cloud data,while the tank deformation is analyzed from two different points which are,the local concave convex degree and the ovality degree.It is concluded that,the difference between the data obtained by 3D laser scanning,and total station is within the range of oil tank deformation limit,therefore,3D laser scanner can be used for oil tank deformation detection.

关键词： 3D laser scanning technologies Large cylindrical oil tank Locally concavo convex Ellipticity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

低温脱脂豆粕增强棉籽粕胶黏剂制备与性能

引用

北京林业大学学报 2024年第6期46卷 137-144页

作者：雷咏睿林熙翔牛文希李祝其陈惠李建章北京林业大学材料科学与技术学院木质材料科学与应用教育部重点实验室北京100083

【目的】阐明不同豆粕添加量对改性棉籽粕胶黏剂耐水胶合强度和黏度的影响机理,为蛋白基胶黏剂的工业化生产与应用提供依据。【方法】以高温脱酚棉籽粕、低温脱脂豆粕和交联剂三缩水甘油胺为原料,在控制豆粕添加量与原料配比的基础上,... 详细信息

【目的】阐明不同豆粕添加量对改性棉籽粕胶黏剂耐水胶合强度和黏度的影响机理,为蛋白基胶黏剂的工业化生产与应用提供依据。【方法】以高温脱酚棉籽粕、低温脱脂豆粕和交联剂三缩水甘油胺为原料,在控制豆粕添加量与原料配比的基础上,合成豆粕改性棉籽粕胶黏剂,并制备杨木胶合板。采用旋转流变仪测试胶黏剂黏度;采用傅里叶变换红外光谱仪、X射线晶体衍射仪和扫描电子显微镜表征胶黏剂的结构和形貌;采用热重分析仪和万能力学拉伸实验机分析胶黏剂的热稳定性和胶接力学性能;最后,综合解析改性胶黏剂的胶接增强机理。【结果】随着豆粕添加量的提高,体系中赖氨酸数量增多,提供了更多的交联反应活性位点,形成多重交联网络结构的机械互锁作用,提高了胶黏剂的耐水胶接性能和黏度。当豆粕添加量为10%时,胶黏剂TCM/SM10的干状和耐水胶合强度分别为1.24和0.79 MPa。提高豆粕添加量至30%时,胶黏剂的干状和耐水胶合强度相比TCM分别提高了60.4%和27.8%,达1.54和0.92 MPa,胶黏剂黏度提高至20.689 Pa·s,且热稳定性、韧性均有所改善。【结论】采用低温豆粕部分替代棉籽粕交联改性制备棉籽粕胶黏剂,有效提高了胶黏剂的涂布性能和耐水胶接性能。为生产低成本高性能的改性棉籽粕胶黏剂提供新的思路,有助于推动蛋白基胶黏剂的规模化工业应用。

关键词：胶黏剂胶合强度胶合板豆粕棉籽粕

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：