检索结果-南通市图书馆

Preparation and interface state of phosphate tailing-based geopolymers

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2024年第6期31卷 1900-1914页

作者： ZHANG Shou-xun XIE Xian XIE Rui-qi TONG Xiong WU Yu-yao LI Jia-wen LI Yue Faculty of Land Resource Engineering Kunming University of Science and TechnologyKunming 650093China National&Regional Engineering Research Center for Green Comprehensive Utilization of Gangue Resources from Metal Mine Kunming 650093China

The long-term storage of phosphate tailings will occupy a large amount of land,pollute soil and groundwater,thus,it is crucial to achieve the harmless disposal of phosphate *** this study,high-performance geopolymers with compressive strength of 38.8 MPa were prepared by using phosphate tailings as the main raw material,fly ash as the active silicon-aluminum material,and water glass as the alkaline *** solid content of phosphate tailings and fly ash was 60% and 40%,respectively,and the water-cement ratio was *** results of XRD,FTIR,SEM-EDS and XPS show that the reactivity of phosphate tailings with alkaline activator is weak,and the silicon-aluminum material can react with alkaline activator to form zeolite and gel,and encapsulate/cover the phosphate tailings to form a dense phosphate tailings-based *** the formation of geopolymers,part of the aluminum-oxygen tetrahedron replaced the silicon-oxygen tetrahedron,causing the polycondensation reaction between geopolymers and increasing the strength of *** leaching toxicity test results show that the geopolymer has a good solid sealing effect on heavy metal *** preparation of geopolymer from phosphate tailings is an important way to alleviate the storage pressure and realize the resource utilization of phosphate tailings.

关键词： phosphate tailing geopolymer interface state toxicity leaching

Reversible Mn^(2+)/Mn^(4+)double-electron redox in P3-type layer-structured sodium-ion cathode

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第2期89卷 79-88,I0004页

作者： Jie Zeng jian Bao Ya Zhang xun-Lu Li Cui Ma Rui-Jie Luo Chong-Yu Du Xuan Xu Zhe Mei Zhe qian Yong-Ning Zhou Department of Materials Science Fudan UniversityShanghai 200433China Shanghai Xuanyi New Energy Development Co. LtdShanghai 201800China Global Institute of Future Technology Shanghai Jiao Tong UniversityShanghai 200240China

The balance between cationic redox and oxygen redox in layer-structured cathode materials is an important issue for sodium batteries to obtain high energy density and considerable cycle *** redox can contribute extra capacity to increase energy density,but results in lattice instability and capacity fading caused by lattice oxygen gliding and oxygen *** this work,reversible Mn^(2+)/Mn^(4+)redox is realized in a P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)cathode material with high specific capacity and structure stability via Co *** contribution of oxygen redox is suppressed significantly by reversible Mn^(2+)/Mn^(4+)redox without sacrificing capacity,thus reducing lattice oxygen release and improving the structure *** X-ray techniques reveal that P3 phase is well maintained in a wide voltage window of 1.5-4.5 V ***^(+)/Na even at 10 C and after long-term *** is disclosed that charge compensation from Co/Mn-ions contributes to the voltage region below 4.2 V and O-ions contribute to the whole voltage *** synergistic contributions of Mn^(2+)/Mn^(4+),Co^(2+)/Co^(3+),and O^(2-)/(O_n)^(2-)redox in P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)lead to a high reversible capacity of 215.0 m A h g^(-1)at 0.1 C with considerable cycle *** strategy opens up new opportunities for the design of high capacity cathode materials for rechargeable batteries.

关键词： Sodium batteries Cathode materials Layered structure Co substitution

Heterointerface engineering of rhombic Rh nanosheets confined on MXene for efficient methanol oxidation

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第6期93卷 419-428,I0011页

作者： qi Zhang Quanguo jiang Xiang Yang Chi Zhang jian Zhang Lu Yang Haiyan He Guobing Ying Huajie Huang College of Materials Science and Engineering Hohai UniversityNanjing 210098JiangsuChina New Energy Technology Engineering Lab of jiangsu Province College of ScienceNanjing University of Posts&Telecommunications(NUPT)Nanjing 210023JiangsuChina School of Materials Science and Engineering Southeast UniversityNanjing 211100JiangsuChina

Although metallic rhodium(Rh)is regarded as a promising platinum-alternative anode catalyst of direct methanol fuel cell(DMFC),the conventional"particle-to-face"contact model between Rh and matrix largely limits the overall electrocatalytic performance due to their insufficient cooperative ***,we report a controllable and robust heterointerface engineering strategy for the bottom-up fabrication of rhombic Rh nanosheets in situ confined on Ti_3C_(2)T_x MXene nanolamellas(Rh NS/MXene)via a convenient stereoassembly *** unique design concept gives the resulting 2D/2D Rh NS/MXene heterostructure intriguing textural features,including large accessible surface areas,strong"face-toface"interfacial interactions,homogeneous Rh nanosheet distribution,ameliorative electronic structure,and high electronic *** a consequence,the as-prepared Rh NS/MXene nanoarchitectures exhibit exceptional electrocatalytic methanol oxidation properties in terms of a large electrochemically active surface area of 126.2 m~2 g_(Rh)~(-1),a high mass activity of 1056.9 mA mg_(Rh)-~1,and a long service life,which significantly outperform those of conventional particle-shaped Rh catalysts supported by carbon black,carbon nanotubes,reduced graphene oxide,and MXene matrixes as well as the commercial Pt nanoparticle/carbon black and Pd nanoparticle/carbon black catalysts with the same noble metal loading *** functional theory calculations further demonstrate that the direct electronic interaction at the well-contacted 2D/2D heterointerfaces effectively enhances the adsorption energy of Rh nanosheets and induces a left shift of the d-band center,thereby making the Rh NS/MXene configuration suffer less from CO *** work highlights the importance of rational heterointerface design in the construction of advanced noble metal/MXene electrocatalysts,which may provide new avenues for developing the next-generation DMFC devices.

关键词： Rhodium nanosheet Ti_(3)C_(2)T_(x)MXene Heterointerface Electrocatalyst Fuel cell

Effect of alumina occurrence form on metallurgical properties of hematite and magnetite pellets

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第4期31卷 797-809页

作者： jian Pan Chen-mei Tang Cong-cong Yang De-qing Zhu Zheng-qi Guo Wei-qun Huang School of Minerals Processing and Bioengineering Central South UniversityChangsha 410083HunanChina Exploration and Development of Geology and Mineral Resources Co. Ltd.Nanchang 330030JiangxiChina

The effect of alumina occurrence form on the metallurgical properties of both hematite and magnetite pellets was investigated at the same Al_(2)O level of 2 wt.%,including reduction index(RI),low-temperature reduction disintegration index(RDI),reduction swelling index(RSI),and high-temperature softening-dripping *** mineralogy of fired pellets was also studied to reveal the influence of alumina occurrence form on the phase composition and *** the results,the alumina occurrence form presents tremendous impacts on the metallurgical perfor-mance of both magnetite and hematite *** of all alumina occurrence forms contributes to inferior reducibility of pellets,especially in the case of gibbsite for magnetite pellets with a RI of 58.4%and kaolinite for hematite pellets with a RI of 56.8%.However,addition of all alumina occurrence forms improves the RDI of magnetite pellets,while there is no significant difference among various alumina occurrence *** contrast,alumina occurrence forms have little influence on the RDI of hematite *** presence of free alumina,gibbsite,and kaolinite tends to improve the RSI of hematite and magnetite pellets,whereas hercynite gives the opposite trend with a RSI of 25.6%.For softening-dripping performance of magnetite pellets,all alumina occurrence forms contribute to narrower softening-melting ***,alumina,gibbsite,and kaolinite give narrower softening-dripping interval,at 229,217,and 88℃,respectively,whereas addition of hercynite results in the largest melting range at 276℃ due to its high melting *** hematite pellets,free alumina,gibbsite,and hercynite tend to enlarge melting range,whereas kaolinite contributes to lower dripping temperature of 1148℃ and narrow softening-dripping interval of 88℃ due to the formation of a greater amount of slag phase at high temperatures.

关键词： Oxidized pellet Magnetite Hematite Alumina occurrence form Metallurgical performance Blast furnace

Control of GaN inverted pyramids growth on c-plane patterned sapphire substrates

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Semiconductors 2024年第6期45卷 92-96页

作者： Luming Yu xun Wang Zhibiao Hao Yi Luo Changzheng Sun Bing Xiong Yanjun Han jian Wang Hongtao Li Lin Gan Lai Wang Beijing National Research Center for Information Science and Technology Department of Electronic EngineeringTsinghua UniversityBei-jing 100084China Center for Flexible Electronics Technology Tsinghua UniversityBeijing 100084China

Growth of gallium nitride(GaN)inverted pyramids on c-plane sapphire substrates is benefit for fabricating novel devices as it forms the semipolar *** this work,GaN inverted pyramids are directly grown on c-plane patterned sapphire substrates(PSS)by metal organic vapor phase epitaxy(MOVPE).The influences of growth conditions on the surface morphol-ogy are experimentally studied and explained by Wulff *** competition of growth rate among{0001},{1011},and{1122}facets results in the various surface morphologies of GaN.A higher growth temperature of 985 ℃ and a lowerⅤ/Ⅲratio of 25 can expand the area of{}facets in GaN inverted *** the other hand,GaN inverted pyramids with almost pure{}facets are obtained by using a lower growth temperature of 930℃,a higherⅤ/Ⅲratio of 100,and PSS with pattern arrangement perpendicular to the substrate primary flat.

关键词： inverted pyramids GaN MOVPE crystal growth competition model

Effect of cooling method on TiN precipitation behavior of high-titanium high-strength steel during solidification

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第7期31卷 1692-1703页

作者： Xue-jian Zhang Guang-wei Yang Yong Wan Yong-hong Wen Chuan-sheng Tang Ming-qi Liu Li-je Tian Key Laboratory of Metallurgical Emission Reduction and Resources Recycling Anhui University of TechnologyMa'anshan 243002AnhuiChina School of Metallurgical Engineering Anhui University of TechnologyMa'anshan 243002AnhuiChina Baosteel Central Research Institute Baoshan Iron and Steel Co.Ltd.Shanghai 201999China

Metallographic microscopy,scanning electron microscopy and TiN growth thermodynamic and kinetic equations were used to investigate the morphology,quantity,and size of TiN in the center of high-titanium high-strength steels under different solidification cooling *** results showed that TiN in the center of the experimental steels mainly existed in three forms:single,composite(Al2O3-TiN),and multi-particle *** began precipitating at around 1497℃(solidification fraction of 0.74).From the end of melting to solidification for 180 s,the cooling rates in the center of the experimental steels for furnace cooling,air cooling,refractory mold cooling,and cast iron mold cooling tended to stabilize at 0.17,0.93,1.65,and 2.15℃/s,*** size of TiN in the center of the experimental steel cooled using furnace cooling was mainly concentrated in the 5-15 pm *** contrast,the size of TiN in the center of the experimental steels cooled using air cooling,refractory mold cooling,and cast iron mold cooling were mainly concentrated in the 1-5 pm *** addition,their density of TiN in the center of the experimental steels is signif-icantly higher than that of the furnace-cooled experimental *** and kinetic precipitation models of TiN established predicted the growth size of TiN in a high-titanium high-strength steel when the solidification cooling rates are not below 0.93℃/s.

关键词： High-titanium steel Cooling method TiN Thermodynamics Kinetics

Hydromassage of macular hole edges for large and persistent full-thickness macular holes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Ophthalmology(English edition) 2024年第3期17卷 551-557页

作者： Yi Cai Wen-Bo Liu Duo Wei xun Deng Xiao-Xin Li Ming-Wei Zhao Xuan Shi jian-Hong Liang Department of Ophthalmology Peking University People’s HospitalBeijing 100044China Eye Diseases and Optometry Institute Beijing 100044China Beijing Key Laboratory of Diagnosis and Therapy of Retinal and Choroid Diseases Beijing 100044China College of Optometry Peking University Health Science CenterBeijing 100044China Xiamen Eye Center of Xiamen University Xiamen 361102Fujian ProvinceChina Department of Ophthalmology the Second Hospital of Lanzhou UniversityLanzhou 730030Gansu ProvinceChina

●AIM:To introduce the macular hole(MH)hydromassage technique as a potentially beneficial approach for the treatment of large or persistent MH.●METHODS:This retrospective observational case series comprised 16 consecutive patients(17 eyes)diagnosed with *** criteria involved a hole aperture diameter larger than 600μm or the presence of an unclosed MH larger than 600μm following the previous *** MH repair procedures were administered in all cases,involving the manipulation and aspiration of the hole margin through the application of water flow with a soft-tip flute needle.A comprehensive assessment was conducted for each case before and after surgery,and optical coherence tomography(OCT)images were captured at every follow-up point.●RESULTS:The mean preoperative aperture diameter was 747±156μm(range 611-1180μm),with a mean base diameter of 1390±435μm(range 578-2220μm).Following surgery,all cases achieved complete anatomical closure of MH,with 13 cases(76.5%)exhibiting type 1 closure and 4 cases(23.5%)demonstrating type 2 *** significant differences were observed in the preoperative OCT variables between the two closure *** with type 1 closure showed a significantly improved visual acuity(0.70±0.10,range 0.50-0.80)compared to those with type 2 closure(0.90±0.12,range 0.80-1.00,P=0.014).●CONCLUSION:The MH hydromassage technique demonstrates promising results,achieving acceptable closure rates in cases of large or persistent *** technique may serve as an effective adjunctive maneuver during challenging MH surgery.

关键词： macular hole large macular hole persistent macular hole optical coherence tomography surgical technique hydromassage

Role of inclination angle on columnar-to-equiaxed transition in the eutectic Al-5Mg-2Si alloy fabricated by laser powder bed fusion

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Central South University 2024年第7期31卷 2150-2166页

作者： YANG Fei-peng WEN Tao ZHANG Lei WANG jian-ying HUANG Shi-long JI Shou-xun YANG Hai-lin State Key Laboratory of Powder Metallurgy Central South UniversityChangsha 410083China Brunel Centre for Advanced Solidification Technology(BCAST) Brunel University LondonUxbridgeMiddlesexUB83PHUnited Kingdom

In this study,the effect of inclination angles relative to the building direction in the additively manufactured eutectic Al-5Mg-2Si alloy was investigated through the laser powder bed fusion(LPBF).The microstructures and mechanical properties of the Al-5Mg-2Si alloy manufactured with different inclination angles(0°,30°,45°,60°and 90°)were reported and *** is found that the“semicircular”melt pool(MP)in the load bearing face of 0°sample was eventually transformed into“stripe-like”MP in the 90°sample,accompanied by an increased fraction of melt pool boundaries(MPBs).Moreover,the microstructural analysis revealed that the columnar-to-equiaxed transition(CET)of theα-Al grains and eutectic Mg2Si was completed in the 90°sample,which were significantly refined with the average size of 10.6μm and 0.44μm,*** is also found that the 90°sample exhibited good combination of strength and elongation(*** strength of 393 MPa,ultimate tensile strength of 483 MPa and elongation of 8.1%).The anisotropic mechanical properties were highly associated with the refined microstructures,thermal stress,and density of ***,the CET driven by inclination angles was attributed to the variation of thermal conditions inside the local MPs.

关键词： additive manufacturing aluminium alloys columnar-to-equiaxed transition anisotropy mechanical property

The clinical features and potential mechanisms of cognitive disorders in peripheral autoimmune and inflammatory diseases

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fundamental Research 2024年第2期4卷 226-236页

作者： Ke-qi Fan Tao Huang jian-shuai Yu Yi-yuan Li Jin Jin MOE Laboratory of Biosystem Homeostasis and Protection and Life Sciences InstituteZhejiang UniversityHangzhou 310058China Department of Gastroenterology Sir Run Shaw HospitalCollege of Medicine Zhejiang UniversityHangzhou 310016China Key Laboratory for Developmental Genes and Human Disease Ministry of EducationInstitute of Life SciencesJiangsu Province High-Tech Key Laboratory for Bio-Medical ResearchSoutheast UniversityNanjing 210096China

According to a study from World Health Organization’s Global Burden of Disease,mental and neurological disorders have accounted for 13%of global diseases in recent years and are on the *** conditions or neuroinflammatory disorders are linked by the presence of an exaggerated immune response both peripherally and in the central nervous system(CNS).Cognitive dysfunction(CD)encompasses a complex group of diseases and has frequently been described in the field of autoimmune diseases,especially in multiple non-CNS-related autoimmune *** studies have provided various hypotheses regarding the occurrence of cognitive impairment in autoimmune diseases,including that abnormally activated immune cells can disrupt the integrity of the blood-brain barrier(BBB)to trigger a central neuroinflammatory *** the BBB is intact,autoantibodies and pro-inflammatory molecules in peripheral circulation can enter the brain to activate microglia,inducing CNS inflammation and ***,the mechanisms explaining the association between the immune system and neural function and their contribution to diseases are *** this review,we used clinical statistics to illustrate the correlation between CD and autoimmune diseases that do not directly affect the CNS,summarized the clinical features and mechanisms by which autoimmune diseases trigger cognitive impairment,and explored existing knowledge regarding the link between CD and autoimmune diseases from the perspective of the field of neuroimmunology.

关键词： Autoimmune diseases Neuroinflammation Central nervous system dysfunction Autoantibodies Inflammatory cytokines