检索结果-南通市图书馆

Journal of Energy Chemistry 2024年第6期93卷 436-442,I0011页

作者： Xingrui Zhang jian Zhang wei Wang Boyuan Hu Yayu Dong Debin Xia Kaifeng Lin Yulin yang MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage School of Chemistry and Chemical EngineeringHarbin Institute of TechnologyHarbin 150001HeilongjiangChina

Here,a novel strategy is proposed targeting the volatility of A-site cations and the disordered arrangement of perovskite grains through employing Cs~+contained metal-organic frameworks In-aip(Cs)obtained by ion-exchange and crystalline *** forces between Cs-O atoms split the pore channels of the pristine In-aip,endowing In-aip(Cs)with multidimensional charge transport channels,In addition,the partially freed Cs~+in the interlayer compensates for the vacancy of A-site cations during the perovskite preparation *** In-aip(Cs)modified perovskite films have a flat morphology,large grains and excellent optoelectronic *** from the high-quality perovskite films and faster charge extraction,the In-aip(Cs)-modified PSCs achieved a champion PCE of 23.03%,superior to the In-aip-modified(22.29%)and control device(21.13%),More importantly,the unencapsulated PSCs modified with In-aip(Cs)exhibited outstanding humidity and thermal *** a period of almost 1000 h,the unencapsulated In-aip(Cs)-modified device retained 85%of its initial PCE after storing in a glove box at 85℃,and retained 87%of the primary PCE upon storage in ambient condition at 25℃under a humidity of 40%.

关键词： Metal-organic frameworks PSCs Stability Defect passivation

Effect of alumina occurrence form on metallurgical properties of hematite and magnetite pellets

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第4期31卷 797-809页

作者： jian Pan Chen-mei Tang Cong-cong yang De-qing Zhu Zheng-qi Guo wei-qun Huang School of Minerals Processing and Bioengineering Central South UniversityChangsha 410083HunanChina Exploration and Development of Geology and Mineral Resources Co. Ltd.Nanchang 330030JiangxiChina

The effect of alumina occurrence form on the metallurgical properties of both hematite and magnetite pellets was investigated at the same Al_(2)O level of 2 wt.%,including reduction index(RI),low-temperature reduction disintegration index(RDI),reduction swelling index(RSI),and high-temperature softening-dripping *** mineralogy of fired pellets was also studied to reveal the influence of alumina occurrence form on the phase composition and *** the results,the alumina occurrence form presents tremendous impacts on the metallurgical perfor-mance of both magnetite and hematite *** of all alumina occurrence forms contributes to inferior reducibility of pellets,especially in the case of gibbsite for magnetite pellets with a RI of 58.4%and kaolinite for hematite pellets with a RI of 56.8%.However,addition of all alumina occurrence forms improves the RDI of magnetite pellets,while there is no significant difference among various alumina occurrence *** contrast,alumina occurrence forms have little influence on the RDI of hematite *** presence of free alumina,gibbsite,and kaolinite tends to improve the RSI of hematite and magnetite pellets,whereas hercynite gives the opposite trend with a RSI of 25.6%.For softening-dripping performance of magnetite pellets,all alumina occurrence forms contribute to narrower softening-melting ***,alumina,gibbsite,and kaolinite give narrower softening-dripping interval,at 229,217,and 88℃,respectively,whereas addition of hercynite results in the largest melting range at 276℃ due to its high melting *** hematite pellets,free alumina,gibbsite,and hercynite tend to enlarge melting range,whereas kaolinite contributes to lower dripping temperature of 1148℃ and narrow softening-dripping interval of 88℃ due to the formation of a greater amount of slag phase at high temperatures.

关键词： Oxidized pellet Magnetite Hematite Alumina occurrence form Metallurgical performance Blast furnace

Towards the insights into the deactivation behavior of acetylene hydrogenation catalyst

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 1405-1414页

作者： Hai-Xia Su yang Jiao jian-Gong Shi Zhi-wei Yuan Di Zhang Xu-Peng Wang Jing Ren Dan Liu jian-Zhou Gui Hai-yang Gao Xiao-Li Xu State Key Laboratory of Separation Membranes&Membrane Processes Tianjin Key Laboratory of Green Chemical Technology and Process EngineeringSchool of Material Science and EngineeringTiangong UniversityTianjin300387China Institute of Engineering Technology Sinopec Catalyst Co.LtdBeijing101100China State Key Laboratory of Separation Membranes and Membrane Processes Tianjin Key Laboratory of Green Chemical Technology and Process EngineeringSchool of ChemistryTiangong UniversityTianjin300387China

A series of model catalysts were obtained by treating commercial fresh and spent catalysts unloaded from the factory with different methods, including green oil dipping, extraction and high-temperature regeneration;finally, the deactivation behavior of the commercial catalyst for acetylene hydrogenation were studied. The influence of various possible deactivation factors on the catalytic performance was elucidated via detailed structural characterization, surface composition analysis, and activity *** results showed that green oil, carbon deposit and sintering of active metal were the main reasons for deactivation, among which green oil and carbon deposit led to rapid deactivation, while the activity could be recovered after regeneration by high-temperature calcination. The sintering of active metal components was attributed to the high-temperature regeneration in hydrothermal conditions, which was slow but irreversible and accounted for permanent deactivation. Thus, optimizing the regeneration is expected to extend the service life of the commercial catalyst.

关键词： Acetylene Hydrogenation Green oil Carbon deposit Sintering Catalyst deactivation

Solidification crack characteristics and sensitivity of peritectic steel

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1668-1679页

作者： Ya-qiang Li jian-hua Liu Zi-ming Wang Ying-ying Li yang He Xiao-wei Li Department of Automotive Engineering Hebei Vocational University of Technology and EngineeringXingtai 054000HebeiChina Hebei Special Vehicle Modification Technology Innovation Center Hebei Vocational University of Technology and EngineeringXingtai 054000HebeiChina Institute of Engineering Technology University of Science and Technology BeijingBeijing 100083China School of Petroleum and Natural Gas Engineering Changzhou UniversityChangzhou 213164JiangsuChina

The characteristics and sensitivity of solidification cracks in peritectic steels were investigated using directional solidifi-cation *** cracks were observed in both hypoperitectic steels(12CrlMoV,15CrMo)and hyper-peritectic steel(20CrMo)during solidification at growth velocities of 15,50,and 80 pm/*** the dendritic boundaries,sulphide precipitates were found,promoting crack *** on the statistical analysis of interdendritic cracks in peritectic steels,the area ratio(RA)of interdendritic cracks in a directional solidification structure was proposed to evaluate the crack sensitivity of peritectic ***,the crack sensitivities of peritectic steels(12CrlMoV,15CrMo,and 20CrMo)were tested,evaluated,and compared with the surface crack rates of three types of steels produced from a steel *** results demonstrated that RA was in good agreement with that of the steel plant,and the crack sensitivity of 12CrlMoV steel was the strongest,followed by that of 15CrMo and 20CrMo ***,RA can be used to evaluate the crack sensitivity of peritectic steel.

关键词： Peritectic steel-Directional solidification Growth velocity Dendritic structure Solidification crack Crack sensitivity

Effect of heat treatment on microstructural evolution,mechanical properties and tribological properties of H13 steel prepared using selective laser melting

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1246-1259页

作者： Li-xiong Han Yan Wang Shi-feng Liu Zhao-hui Zhang wei Liu Xin yang Dang-shen Ma jian Zhou Ying-kang wei College of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an710055ShaanxiChina Zhejiang University City College Hangzhou310015ZhejiangChina China Iron and Steel Research Institute Group Co. Ltd.Beijing100081China

H13 tool steel was successfully prepared by selective laser melting(SLM)*** effects of heat treatment on the microstructure,mechanical properties,and tribological properties of SLMed H13 steel were *** heat treatment process involved a solution treatment and a double aging treatment of the deposited H13 tool steel prepared by *** aim is to optimize the microstructure and mechanical properties of SLMed H13 *** to the rapid heating and cooling effects of SLM,carbide precipitation in the deposited H13 steel was not uniform and residual stresses were *** purpose of the solution treatment is to dissolve the solution at a high temperature to eliminate the residual stresses and defects introduced by the SLM-forming *** solution treatment and first aging treatment produced the precipitation of small carbides at the grain boundaries and inside the crystals,which increased the hardness of SLMed H13 *** hardness increased from 538±4.0 HV of the as-deposited sample to 548±5.8 HV of samples after the first aging ***,the ultimate tensile strength and the elongation at break decreased from 1882 MPa and 11.5%in the as-deposited sample to 1697 MPa and 7.9%in those after the first aging treatment,***,the friction coefficient and wear rate in the as-deposited sample decreased from 0.5160 and 2.36×10^(–6)mm^(−3)N^(−1)m^(−1)to 0.4244 and 1.04×10^(–6)mm^(−3)N^(−1)m^(−1),***,the distribution of carbides inside the crystals was not *** second aging treatment adjusted the morphology of carbide precipitation and made it more uniform,but the precipitation of carbides grew and settled at the bottom of the grain *** hardness decreased to 533±6.7 HV compared with that with the first aging treatment,but the ultimate tensile strength and plasticity reached a balance(1807 MPa,14.05%).Accordingly,the friction coefficient and wear rate also showed a stable and decreasin

关键词： Selective laser melting H13 steel Solution aging Double aging Friction and wear Retained austenite

Co-Harvest Phase-Change Enthalpy and Isomerization Energy for High-Energy Heat Output by Controlling Crystallization of Alkyl-Grafted Azobenzene Molecules

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第3期7卷 415-424页

作者： jian Gao Yiyu Feng Wenyu Fang Hui Wang Jing Ge Xiaoyu yang Huitao Yu Mengmeng Qin wei Feng School of Materials Science and Engineering Tianjin UniversityTianjin 300350China Key Laboratory of Materials Processing and Mold Ministry of EducationZhengzhou UniversityZhengzhou 450002China

Photoisomerization-induced phase change are important for co-harvesting the latent heat and isomerization energy of azobenzene *** optimizing heat output and energy delivery at alternating temperatures are challenging because of the differences in crystallizability and *** article reports two series of asymmetrically alkyl-grafted azobenzene(Azo-g),with and without a methyl group,that have an optically triggered phase *** exothermic modes were designed to utilize crystallization enthalpy(△H_(c))and photothermal(isomerization)energy(△H_(p))at different temperatures determined by the ***-g has high heat output(275-303 J g^(-1))by synchronously releasing△H_(c)and△H_(p)over a wide temperature range(-79℃to 25℃).We fabricated a new distributed energy utilization and delivery system to realize a temperature increase of 6.6℃at a temperature of-8℃.The findings offer insight into selective utilization of latent heat and isomerization energy by molecular optimization of crystallization and isomerization processes.

关键词： crystallizability distributed energy utilization system energy density exothermic modes isomerization

Multifunctional MOF@COF Nanoparticles Mediated Perovskite Films Management Toward Sustainable Perovskite Solar Cells

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第9期16卷 195-208页

作者： Yayu Dong jian Zhang Hongyu Zhang wei Wang Boyuan Hu Debin Xia Kaifeng Lin Lin Geng Yulin yang MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage School of Chemistry and Chemical EngineeringHarbin Institute of TechnologyHarbin 150001HeilongjiangPeople’s Republic of China School of Materials Science and Engineering East China Jiaotong UniversityNanchang 330013JiangxiPeople’s Republic of China School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001HeilongjiangPeople’s Republic of China

Although covalent organic frameworks(COFs)with highπ-conjugation have recently exhibited great prospects in perovskite solar cells(PSCs),their further application in PSCs is still hindered by face-to-face stacking and aggregation ***,metal-organic framework(MOF-808)is selected as an ideal platform for the in situ homogeneous growth of a COF to construct a core-shell MOF@COF nanoparticle,which could effectively inhibit COF stacking and *** synergistic intrinsic mechanisms induced by the MOF@COF nanoparticles for reinforcing intrinsic stability and mitigating lead leakage in PSCs have been *** complementary utilization ofπ-conjugated skeletons and nanopores could optimize the crystallization of large-grained perovskite films and eliminate *** resulting PSCs achieve an impressive power conversion efficiency of 23.61%with superior open circuit voltage(1.20 V)and maintained approximately 90%of the original power conversion efficiency after 2000 h(30-50%RH and 25-30℃).Benefiting from the synergistic effects of the in situ chemical fixation and adsorption abilities of the MOF@COF nanoparticles,the amount of lead leakage from unpackaged PSCs soaked in water(<5 ppm)satisfies the laboratory assessment required for the Resource Conservation and Recovery Act Regulation.

关键词： Perovskite solar cells Covalent organic frameworks Metal-organic frameworks Lead leakage Stability

Ca and Sr co-doping induced oxygen vacancies in 3DOM La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts for boosting low-temperature oxidative coupling of methane

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第4期91卷 331-344页

作者： Tongtong Wu Yuechang wei Jing Xiong Yitao yang Zhenpeng Wang Dawei Han Zhen Zhao jian Liu State Key Laboratory of Heavy Oil Processing China University of PetroleumBeijing 102249China Key Laboratory of Optical Detection Technology for Oil and Gas China University of PetroleumBeijing 102249China

It is urgent to develop catalysts with application potential for oxidative coupling of methane(OCM)at relatively lower ***,three-dimensional ordered macro porous(3 DOM)La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)(A_(2)B_(2)O_(7)-type)catalysts with disordered defective cubic fluorite phased structure were successfully prepared by a colloidal crystal template method.3DOM structure promotes the accessibility of the gaseous reactants(O2and CH4)to the active *** co-doping of Ca and Sr ions in La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts improved the formation of oxygen vacancies,thereby leading to increased density of surface-active oxygen species(O_(2)^(-))for the activation of CH4and the formation of C2products(C2H6and C2H4).3DOM La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts exhibit high catalytic activity for OCM at low temperature.3DOM La1.7Sr0.3Ce1.7Ca0.3O7-δcatalyst with the highest density of O_(2)^(-)species exhibited the highest catalytic activity for low-temperature OCM,i.e.,its CH4conversion,selectivity and yield of C2products at 650℃are 32.2%,66.1%and 21.3%,*** mechanism was proposed that the increase in surface oxygen vacancies induced by the co-doping of Ca and Sr ions boosts the key step of C-H bond breaking and C-C bond coupling in catalyzing low-temperature *** is meaningful for the development of the low-temperature and high-efficient catalysts for OCM reaction in practical application.

关键词： 3DOM catalysts Ca ions Sr ions Low-temperature oxidative couplingof methane Oxygen vacancies O_(2)^(-) species

Force-position collaborative optimization of rope-driven snake manipulator for capturing non-cooperative space targets

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第9期37卷 369-384页

作者： Xiaofeng LI jian TIAN Cheng wei Xibin CAO School of Astronautics Harbin Institute of TechnologyHarbin 150001China Beijing Instiuteof Spacecraft System Engineering China Academy of Space TechnolgyBeijing 100094Chia

With the rapid development of space activities,non-cooperative space targets increase swiftly,such as failed satellites and upper stages,threating normal spacecrafts *** there are some problems in the capture process,such as excessive collision and fast tumbling of targets,manipulator with redundant Degrees of Freedom(DOFs)can be used to improve the compliance and therefore solve these *** Rope-Driven Snake Manipulator(RDSM)is a combina-tion of hyper-redundant DOFs and better compliance,and therefore it is suitable for capturing *** this paper,a snake manipulator mechanism is designed,and the complete kinematic model and system dynamic model considering RDSM,target and contact is ***,to obtain the configuration of joint with hyper-redundant DOFs,an improved motion dexterity index is pro-posed as the joint motion optimization ***,the force-position collaborative optimization index is designed to adjust active stiffness,and the impedance control method based on the modified index is used to capture the space ***,the proposed force-position collaborative opti-mization method is verified by virtual prototype *** results demonstrate that based on the proposed method,the collision force is reduced by about 25%compared to normal impe-dance control,showing higher safety.

关键词： Capturing non-cooperative spacetargets Rope-driven snakemanipu-lator Force-position collaborative optimization Redundant degrees of free-dom Active stiffness adjustment

Research on the solid particle erosion wear of pipe steel for hydraulic fracturing based on experiments and numerical simulations

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第4期21卷 2779-2792页

作者： Si-Qi yang jian-Chun Fan Ming-Tao Liu De-Ning Li Jun-Liang Li Li-Hong Han jian-Jun Wang Shang-Yu yang Si-wei Dai Lai-Bin Zhang State Key Laboratory of Oil and Gas Equipment CNPC Tubular Goods Research Institute Key Laboratory of Oil and Gas Safety and Emergency Technology China University of Petroleum Oil Production Technology Research Institute of Liaohe Oilfield Company Tianjin Gas Storage Branch PetroChina Dagang Oilfield Company Petroleum Production Engineering Research Institute Daqing Oilfield Company

Erosion wear is a common failure mode in the oil and gas industry. In the hydraulic fracturing, the fracturing pipes are not only in high-pressure working environment, but also suffer from the impact of the high-speed solid particles in the fracturing fluid. Beneath such complex conditions, the vulnerable components of the pipe system are prone to perforation or even burst accidents, which has become one of the most serious risks at the fracturing site. Unfortunately, it is not yet fully understood the erosion mechanism of pipe steel for hydraulic fracturing. Therefore, this article provides a detailed analysis of the erosion behavior of fracturing pipes under complex working conditions based on experiments and numerical simulations. Firstly, we conducted erosion experiments on AISI 4135 steel for fracturing pipes to investigate the erosion characteristics of the material. The effects of impact angle, flow velocity and applied stress on erosion wear were comprehensively considered. Then a particle impact dynamic model of erosion wear was developed based on the experimental parameters, and the evolution process of particle erosion under different impact angles, impact velocities and applied stress was analyzed. By combining the erosion characteristics, the micro-structure of the eroded area, and the micro-mechanics of erosion damage, the erosion mechanism of pipe steel under fracturing conditions was studied in detail for the first time. Under high-pressure operating conditions, it was demonstrated through experiments and numerical simulations that the size of the micro-defects in the eroded area increased as the applied stress increased, resulting in more severe erosion wear of fracturing pipes.

关键词： Erosion wear Applied stress Particle impact dynamics Erosion mechanism