检索结果-南通市图书馆

Engineering of Fuel Plates on Uranium-Molybdenum Monolithic: Critical Issues

World Journal of Nuclear Science and Technology 2015年第4期5卷 274-286页

作者： jaime lisboa Jorge Marin Mario Barrera Héctor Pesenti Departamento de Materiales Nucleares Comisión Chilena de Energía Nuclear CCHEN Santiago Chile Instituto de Materiales Facultad de Ingeniería Universidad Austral de Chile Valdivia Chile

Engineering of nuclear fuels using monolithic plates of uranium-molybdenum and Al-6061 cladding is the current challenge for research and test reactors. The main drawback of the manufacture of monolithic nuclear fuel was analyzed using two surface coating methods: aluminum sputtering and transient liquid phase bonding (TLPB). Coating was done with a commercial alloy of Al-Si (R-4047). These techniques were used to improve the metallurgical bonding between the UMo and the cladding by rolling. Finally, design parameters and manufacture of UMo plate fuels were established. Mechanical tests were used to characterize the plates, resulting in UTS values of about 700 and 1000 MPa for the UMo alloys. These results are complemented with metrological analyses, X-Ray diffraction (XRD), thermal analyses, and metallography. X-rays and ultrasound scanners were used to monitor bonding and the co-rolling effects. These initial results show the main obstacles to the engineering development of UMo monolithic plate fuels with Al-6061 cladding, and these are discussed herein.

关键词： Metallurgic Bonding Co-Rolling Monolithic UMo Aluminum Alloy Nuclear Fuel

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Atomization of UMo Particles under Nitrogen Atmosphere

引用

World Journal of Nuclear Science and Technology 2016年第1期6卷 43-52页

作者： Luis Olivares jaime lisboa Jorge Marin Mario Barrera Alberto Navarrete Nuclear Materials Department Chilean Commission for Nuclear Energy (CCHEN) Santiago Chile Physic Department Universidad de Santiago de Chile (USACH) Santiago Chile

Generally, the atomization of UMo particles is done under vacuum or argon atmosphere, and the surface modification of these UMo particles is, usually, carried on through a further process. The techniques for surface modification of atomized UMo particles, aimed to control the Fuel/Matrix interaction, involve, in some cases, complex methodologies and often with minor effect due to the limited solubility of third elements in solid UMo alloy. The atomization and surface conditioning, applied in separate stages, may affect the efficiency of powder production process. Then, the main goal of this study is to explore the surface modification of UMo particles in liquid state or during the solidification that follows the centrifugal atomization process. Through the change of atomization atmosphere, could be possible to promote liquid/gas reactions, with a higher solubility of the modifier element in micro drops of UMo alloy, before they become solid particles. This paper presents comparative results of centrifugal atomization of UMo particles, carried out under inert argon and reactive nitrogen atmospheres. Dissolved nitrogen contents, measured by SEM-EDS analyses, reached up to 7.57 wt% at the center of under nitrogen atomized particles, very higher than 0.84 wt% of nitrogen measured at the center of UMo particle atomized under argon. The presence of uranium nitride was partially verified by conventional XRD analysis. Nevertheless, Out-of-Pile interaction test result, reveals decreasing of aluminium contents into UMo particles atomized under nitrogen atmosphere;Just 3.77 wt% of Al was the maximum content detected in the center of these particles, very lower than 29.11 wt% of Al measured inside UMo particles atomized under argon. Finally, it is possible to conclude that the atomization under reactive atmosphere may modify the surface composition and the behavior of UMo fuel particles dispersed in aluminium, for dispersion type nuclear fuel application.

关键词： Atomization UMo Particles Dispersion Nuclear Fuel

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：