检索结果-南通市图书馆

Grade-4 commercially pure titanium with ultrahigh strength achieved by twinning-induced grain refinement through cryogenic deformation

引用

Journal of Materials Science & Technology 2021年第7期66卷 193-201页

作者： Seong-Woo Choi jae Sukjeong Jong Woo Won jae keun hong Yoon Suk Choi Titanium Department.Korea Institute of Materials Science Changwon51508Republic of Korea School of Materials Science and Engineering Pusan National UniversityPusan.46241Republic of Korea Materials and Manufacturing Development Team Doosan Heavy Industries and ConstructionChangwon51711Republic of Korea

The yield strength of commercially pure(CP) Ti of ASTM grade 4, the strongest among all the CP-Ti grades, is too low for structural applications that require high-strength materials. Here, we demonstrate the strengthening of grade-4 CP Ti by cryogenic-temperature rolling(CTR), which enables deformation twinning in grade-4 CP Ti to achieve twinning-induced grain refinement. CTR activated {11.22} twinning and {10.12} twinning, which are the most common twinning systems in pure Ti, whereas room-temperature rolling(RTR) did not activate any twinning system. CTR with imposing an area reduction of just 30% significantly increased the yield strength of the CP Ti to 946 MPa, which is not achievable through typical processes performed at or above room temperature and is comparable to that of commercial Ti-6 Al-4 V. The significant increase in strength was due to microstructural strengthening caused by twinning-induced grain refinement, combined with dislocation accumulation. In contrast to RTR, CTR greatly increased the stress concentration at grain boundaries(GBs), which caused the unusual activation of twinning in the grade-4 CP Ti by facilitating twin nucleation at GBs. The stress concentration increased because CTR activated the slip to a lesser extent compared to RTR, thereby reducing the strain compatibility between neighboring grains. These results will contribute to development of ultrahigh-strength CP Ti and may thereby extend its use to structural applications that require high-strength materials.

关键词： Titanium Twinning Cryogenic deformation Grain refinement Tensile properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

N, P co-doped 3D porous carbon with self-assembled morphological control via template-free method for potassiumion battery anodes

引用

Rare Metals 2024年第9期43卷 4243-4252页

作者： Jeehoon Yu Dae Kyom Kim hong Geun Oh Seung-keun Park Youngjae Yoo Department of Advanced Materials Engineering Chung-Ang University

The larger ionic radius of potassium ions than that of lithium ions significantly limits the accomplishment of rapid diffusion kinetics in graphite electrodes for potassium-ion batteries （PIBs）,resulting in comparatively poor rate performance and cycle ***,we report a high-rate performance and cycling stability amorphous carbon electrode achieved through nitrogen and phosphorous *** as-prepared N,P co-doped carbon electrodes have distinct 3D structures with large surface areas,hierarchical pore architectures,and increased interlayer spaces resulting from the direct pyrolysis of supramolecular self-assembled aggregates without *** obtained electrode N3P1 exhibits a reversible specific capacity of 258 m Ah·g-1at a current density of 0.1A·g-1and a good long-term cycle performance (96.1%capacity retention after 800 cycles at 0.5 A·g-1).Kinetic investigations show that the N3P1 electrode with the welldeveloped porous structure and large number of surface defects exhibits capacitive-driven behavior at all scan rates,which may be attributed by N and P ***-situ transmission electron microscopy analyses in the fully discharged and charged states demonstrate structural stability and reversibility owing to the expanded interlayer *** suggested synthesis approach is simple and effective for producing heteroatom-doped carbon materials for PIBs and other advanced electrochemical energy storage materials.

关键词： 3D porous structures Amorphous carbons Nitrogen and phosphorous co-doping Potassium-ion batteries

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Advances in Wireless,Batteryless,Implantable Electronics for Real‑Time,Continuous Physiological Monitoring

引用

Nano-Micro Letters 2024年第3期16卷 254-302页

作者： Hyeonseok Kim Bruno Rigo Gabriella Wong Yoon jae Lee Woon‑hong Yeo IEN Center for Wearable Intelligent Systems and Healthcare Georgia Institute of TechnologyAtlantaGA 30332USA George W.Woodruff School of Mechanical Engineering Georgia Institute of TechnologyAtlantaGA 30332USA School of Electrical and Computer Engineering Georgia Institute of TechnologyAtlantaGA 30332USA Wallace H.Coulter Department of Biomedical Engineering Georgia Tech and Emory University School of MedicineAtlantaGA 30332USA Parker H.Petit Institute for Bioengineering and Biosciences Institute for MaterialsInstitute for Robotics and Intelligent MachinesGeorgia Institute of TechnologyAtlantaGA 30332USA

This review summarizes recent progress in developing wireless,batteryless,fully implantable biomedical devices for real-time continuous physiological signal monitoring,focusing on advancing human health *** considerations,such as biological constraints,energy sourcing,and wireless communication,are discussed in achieving the desired performance of the devices and enhanced interface with human *** addition,we review the recent achievements in materials used for developing implantable systems,emphasizing their importance in achieving multi-functionalities,biocompatibility,and *** wireless,batteryless devices offer minimally invasive device insertion to the body,enabling portable health monitoring and advanced disease ***,we summarize the most recent practical applications of advanced implantable devices for human health care,highlighting their potential for immediate commercialization and clinical uses.

关键词： Implantable electronics Biomedical systems Batteryless devices Wireless electronics Physiological signal monitoring

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Modeling hot deformation behavior of low-cost Ti-2Al-9.2Mo-2Fe beta titanium alloy using a deep neural network

引用

Journal of Materials Science & Technology 2019年第5期35卷 907-916页

作者： Cheng-Lin Li P.L.Narayana N.S.Reddy Seong-Woo Choi Jong-Taek Yeom jae-keun hong Chan Hee Park Advanced Metals Division Korea Institute of Materials Science Changwon 51508 Republic of Korea School of Materials Science and Engineering Gyeongsang National University Jinju 52828 Republic of Korea

Ti-2 Al-9.2 Mo-2 Fe is a low-cost β titanium alloy with well-balanced strength and ductility, but hot working of this alloy is complex and unfamiliar. Understanding the nonlinear relationships among the strain,strain rate, temperature, and flow stress of this alloy is essential to optimize the hot working *** this study, a deep neural network(DNN) model was developed to correlate flow stress with a wide range of strains(0.025–0.6), strain rates(0.01–10 s^-1) and temperatures(750–1000℃). The model, which was tested with 96 unseen datasets, showed better performance than existing models, with a correlation coefficient of 0.999. The processing map constructed using the DNN model was effective in predicting the microstructural evolution of the alloy. Moreover, it led to the optimization of hot-working conditions to avoid the formation of brittle precipitates(temperatures of 820–1000℃ and strain rates of 0.01-0.1 s^-1).

关键词： Deep neural networks Back propagation Processing map Recrystallization Beta titanium

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Bimodal grain structures and tensile properties of a biomedical Co-20Cr-15W-10Ni alloy with different pre-strains

引用

Rare Metals 2021年第1期40卷 20-30页

作者： Cheng-Lin Li Seong-Woo Choi Jeong Mok Oh jae-keun hong Jong-Taek Yeom Joo-Hee Kang Qing-Song Mei Chan Hee Park Department of Materials Engineering School of Power and Mechanical EngineeringWuhan UniversityWuhan 430072China Advanced Metals Division.Korea Institute of Materials Science Changwon 51508Republic of Korea Materials Testing&Reliability Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea

The influence of pre-strain on the formation of bimodal grain structures and tensile properties of a Co-20 Cr-15 W-10 Ni alloy was *** bimodal grain structures consist of fine grains(FGs;2-3μm in diameter)and coarse grains(CGs;8-16μm in diameter),which can be manipulated by changing the pre-strain(ε=0.3-0.7)and annealing temperatures(1000-1100℃).High pre-strain applied in the samples can intensify the plasticity heterogeneity through increasing the total dislocation density and the local volumes of high-density *** can essentially result in finer FGs,a higher FG volume fraction,and overall grain refinement in the samples after ***-temperature essentially increases both the size and volume fraction of CGs,leading to an increase in the average grain *** tensile test suggests that the bimodal grain structured samples exhibited both high strength and ductility,yield strengths of621-877 MPa and ultimate tensile strengths of1187-1367 MPa with uniform elongations of 55.0%-71.4%.The superior strength-ductility combination of the samples arises from the specific deformation mechanisms of the bimodal grain *** tensile properties strongly depend on the size ratio and volume fraction of FGs/CGs in addition to the average grain size in the bimodal grain *** grain structures can be modified via changing the pre-strain and annealing temperature.

关键词： Biomaterials Bimodal grain structure Deformation heterogeneity Pinning High strength/ductility

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Pedicled abdominal flap using deep inferior epigastric artery perforators for forearm reconstruction: A case report

引用

World Journal of Clinical Cases 2024年第4期12卷 828-834页

作者： jae Hyung Jeon Kyung Wook Kim hong Bae Jeon Department of Plastic and Reconstructive Surgery Dankook University HospitalCheonan 31116ChungnamSouth Korea Department of Orthopaedic Surgery Dankook University HospitalDankook University College of MedicineCheonan 31116ChungnamSouth Korea Department of Plastic and Reconstructive Surgery Dankook University HospitalDankook University College of MedicineCheonan 31116ChungnamSouth Korea

BACKGROUND Pedicled abdominal flaps are a widely used surgical technique for forearm reconstruction in patients with soft tissue ***,some drawbacks include restricted flap size,partial flap loss,and donor-site *** address these concerns,we present a case of a pedicled abdominal flap using the deep inferior epigastric artery perforators(DIEP)for forearm reconstruction in a patient with a large soft tissue *** SUMMARY A 46-year-old male patient was admitted to our hospital with forearm injury caused by a pressing machine.A 15 cm×10 cm soft tissue defect with complete rupture of the ulnar side structures of the forearm was *** week after orthopedic management of the neurovascular injury and fractures using the first stage of Masquelet technique,the patient was referred to the plastic and recon-structive surgery department for wound *** debridement and negative-pressure wound therapy revealed a 20 cm×15 cm soft tissue defect.A pedicle abdominal flap with the DIEP was used to cover the *** weeks later,the flap was detached from the abdomen,and the abdominal defect was directly ***,the second stage of Masquelet technique was performed at the fracture site at week ***,all donor and recipient sites healed without complications,such as flap dehiscence,infection,hematoma,or *** site osteosynthesis was achieved without *** Pedicled abdominal flap using the DIEP provides a reliable option for forearm reconstruction in patients with large soft tissue defects.

关键词： Forearm injury Open fracture reduction Perforator flap Deep inferior epigastric artery perforators Case report

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Thermal stability of bimodal grain structure in a cobalt-based superalloy subjected to high-temperature exposure

引用

Rare Metals 2021年第4期40卷 877-884页

作者： Cheng-Lin Li Jeong Mok Oh Seong-Woo Choi Xin-Ming Mei jae-keun hong Jong-Taek Yeom Qing-Song Mei Zhen-Tao Yu Chan Hee Park School of Power and Mechanical Engineering Wuhan UniversityWuhan 430072China Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea Institute of Advanced Wear and Corrosion Resistant and Functional Materials Jinan UniversityGuangzhou 510632China

The present work investigates the thermal stability and mechanical properties of a Co-20 Cr-15 W-10 Ni(wt%) alloy with a bimodal grain(BG) *** BG structure consisting of fine grains(FGs) and coarse grains(CGs) is thermally stable under high-temperature exposure treatments of 760℃ for 100 h and 870℃ for 100-1000 *** size of both FGs and CGs remains no significant changes after thermal exposure *** microstructural stability is associated with the slow kinetics of grain growth and the pinning of *** thermal stability enables to maintain the BG structures,leading to the same mechanical properties as the sample without thermal exposure *** particular,the BG alloy samples after thermal exposure treatment exhibit superior mechanical properties of both high strength and high ductility compared to the unimodal grain(UG) structured *** BG structure of the alloy samples after thermal exposure is capable of avoiding severe loss of ductility and retaining high *** specifically,the ductility of the BG alloy samples after thermal exposure treatments of 870℃ for 500-1000 h is ten times higher(44.6% vs.3.5% and 52.6% vs.5.0%) than that of the UG *** finding in the present work may give new insights into high-temperature applications of the Co-20 Cr-15 W-10 Ni alloy and other metallic materials with a BG structure.

关键词： Thermal stability Bimodal grain structure High-temperature exposure Cobalt-based superalloy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Surgical Repair of Ventricular Septal Defect in Neonates: Indications and Outcomes

引用

Congenital Heart Disease 2024年第1期19卷 69-83页

作者： jae hong Lee Sungkyu Cho jae Gun Kwak Hye Won Kwon Woong-Han Kim Mi Kyoung Song Sang-Yun Lee Gi Beom Kim Eun Jung Bae Department of Thoracic and Cardiovascular Surgery Research Institute for Convergence of Biomedical Science and TechnologyPusan National University Yangsan HospitalYangsanKorea Department of Thoracic and Cardiovascular Surgery Seoul National University Children’s HospitalSeoulKorea Department of Pediatrics Seoul National University Children’s HospitalSeoulKorea

Background:The optimal surgical timing and clinical outcomes of ventricular septal defect(VSD)closure in neo-nates remain *** aimed to evaluate the clinical outcomes of VSD closure in neonates(age≤30 days).Methods:We retrospectively reviewed 50 consecutive neonates who underwent VSD closure for isolated VSDs between August 2003 and June *** for the procedure included congestive heart failure/failure to thrive and pulmonary *** adverse events(MAEs)were deﬁned as the composite of all-cause mortality,reoperation,persistent atrioventricular block,and signiﬁcant(≥grade 2)valvular ***:The median age and body weight at operation were 26.0 days(interquartile range[IQR],18.8–28.3)and 3.7 kg(IQR,3.3–4.2),*** median follow-up duration was 110.4 months(IQR,56.8–165.0).Seven patients required preoperative respiratory support,andﬁve had signiﬁcant(≥grade 2)preoperative valvular *** early mortality occurred due to irreversible cardiogenic shock;no late mortality was *** reopera-tion was due to hemodynamically signiﬁcant residual VSD at 103.8 months *** overall survival,freedom from reoperation,and freedom from MAE at 15-years were 98.0%,96.3%,and 94.4%,***-operative mechanical ventilation was associated with a longer duration of postoperative mechanical ventilation(p<0.001)and a longer length of intensive care unit stay(p<0.001).Conclusions:VSD closure with favorable outcomes without morbidities is feasible even in ***,neonates requiring preoperative respiratory support may require careful postoperative management considering the long-term postoperative ***,surgical VSD closure might be indicated earlier in neonates with respiratory compromise.

关键词： Ventricular septal defect neonate early surgery neonatal surgery

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

烧结方法对CP-Ti粉末烧结块显微组织和力学性能的影响(英文)

引用

Transactions of Nonferrous Metals Society of China 2014年第S1期24卷 59-67页

作者： Je-ha SHON Jong-moon PARK Kyeong-sik CHO jae-keun hong Nho-kwang PARK Myung-hoon OH Department of Advanced Materials Engineering Kumoh National Institute of Technology Gumi Gyeongbuk 730-701 Korea Advanced Technology Team Pohang Institute of Metal Industry Advancement Pohang Gyeongbuk 790-834 Korea Titanium Department Korea Institute of Materials Science (KIMS) Changwon Gyeongnam 642-831 Korea

研究不同烧结方法,包括放电等离子体烧结(SPS)、热压(HP)和电阻烧结(ERS),对商用纯钛(CP-Ti)粉末固结后显微组织和力学性能的影响。选用的粉末粒度分别为<147μm,<74μm和<43μm,粉末粒度越小,其致密化过程越快。在850°C、30 MPa条件... 详细信息

研究不同烧结方法,包括放电等离子体烧结(SPS)、热压(HP)和电阻烧结(ERS),对商用纯钛(CP-Ti)粉末固结后显微组织和力学性能的影响。选用的粉末粒度分别为<147μm,<74μm和<43μm,粉末粒度越小,其致密化过程越快。在850°C、30 MPa条件下进行SPS和HP,获得烧结体的相对密度高达99%。而通过ERS,则在950°C、30 MPa条件下才发生CP-Ti粉末的致密化。在850~950°C获得烧结钛的显微组织由等轴晶构成。对于粒度<43μm粉末,在850°C、30 MPa条件下通过SPS制备烧结体,其屈服强度为868 MPa。随着小尺寸颗粒含量的升高,通过SPS和HP制备烧结体的屈服强度得到提高。然而在950°C、30MPa条件下,通过ERS制备样品的最高屈服强度仅为441 MPa,比SPS和HP样品的低。与SPS和HP相比,ERS需要较短的烧结时间,但较高的烧结温度导致材料的脆性断裂,使其强度和伸长率降低。

关键词： CP-Ti粉末烧结方法放电等离子体烧结热压电阻烧结

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Stable immobilization of lithium polysulfides using three-dimensional ordered mesoporous Mn2O3 as the host material in lithium-sulfur batteries

引用

Carbon Energy 2024年第6期6卷 99-112页

作者： Sung Joon Park Yun Jeong Choi Hyun-seung Kim Min Joo hong hongjun Chang Janghyuk Moon Young-Jun Kim Junyoung Mun Ki jae Kim Department of Energy Science Sungkyunkwan UniversitySuwonGyeonggi-doRepublic of Korea Department of Energy Engineering Konkuk UniversitySeoulRepublic of Korea Advanced Batteries Research Center Korea Electronic Technology InstituteSeongnamRepublic of Korea Department of Future Energy Engineering Sungkyunkwan UniversitySuwonRepublic of Korea Department of Energy Systems Engineering Chung-Ang UniversitySeoulRepublic of Korea SKKU Advanced Institute of Nanotechnology Sungkyunkwan UniversitySuwonGyeonggi-doRepublic of Korea SKKU Institute of Energy Science and Technology(SIEST) Sungkyunkwan UniversitySuwonRepublic of Korea School of Advanced Materials Science and Engineering Sungkyunkwan UniversitySuwonRepublic of Korea

Lithium-sulfur batteries(LSBs)have drawn significant attention owing to their high theoretical discharge capacity and energy ***,the dissolution of long-chain polysulfides into the electrolyte during the charge and discharge process(“shuttle effect”)results in fast capacity fading and inferior electrochemical *** this study,Mn_(2)O_(3)with an ordered mesoporous structure(OM-Mn_(2)O_(3))was designed as a cathode host for LSBs via KIT-6 hard templating,to effectively inhibit the polysulfide shuttle ***-Mn_(2)O_(3)offers numerous pores to confine sulfur and tightly anchor the dissolved polysulfides through the combined effects of strong polar-polar interactions,polysulfides,and sulfur chain *** OM-Mn_(2)O_(3)/S composite electrode delivered a discharge capacity of 561 mAh g-1 after 250 cycles at 0.5 C owing to the excellent performance of OM-Mn_(2)O_(3).Furthermore,it retained a discharge capacity of 628mA h g-1 even at a rate of 2 C,which was significantly higher than that of a pristine sulfur electrode(206mA h g-1).These findings provide a prospective strategy for designing cathode materials for high-performance LSBs.

关键词： host material lithium-sulfur battery ordered mesoporous structure shuttle effect transition-metal oxides

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：