检索结果-南通市图书馆

中国有色金属学会会刊：英文版 2012年第S3期22卷 745-752页

作者： Seong-jong KIM Seong-kweon KIM jae-cheul park Division of Marine Engineering Mokpo Maritime University Department of Electronic IT Media Engineering Institue of TechnologySeoul National University of Science and Technology New Growth Technical Support Team Green and Industrial Technology CenterKorean Register of Shipping

To improve the durability of underwater rotating products,the corrosion characteristics in harsh marine environment were evaluated through various electrochemical experiments on the Al2O3-3TiO2 and CoNiCrAlY coating layers by atmospheric pressure plasma spray coating *** evaluating the corrosion resistance of these materials,their applicability to environmentally friendly power generation equipment such as blades of tidal current turbines was *** to the Tafel analysis for micro-areas including the coating layer,the coating/metal interlayer and the base metal,the Al2O3-3TiO2 coating layer and the CoNiCrAlY coating layer show markedly lower corrosion current density than the base *** corrosion current density of the CoNiCrAlY coating layer (9.75316×10-8A/cm2) is about 1.6 times more than that of the Al2O3-3TiO2 coating layer (6.13139×10-8A/cm2).

关键词： Al2O3-3TiO2 coating layer CoNiCrAlY coating layer underwater rotating products marine environment corrosion characteristics atmospheric pressure plasma spray

Optimum condition by mechanical characteristic evaluation in friction stir welding for 5083-O Al alloy

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2009年第B9期19卷 17-22页

作者： Min-Su HAN Seung-Jun LEE jae-cheul park Seok-Cheol KO Yong-Bin WOO Seong-Jong KIM Division of Marine Engineering Mokpo Maritime University Chungnam Regional Innovation Agency

The mechanical characteristies for friction stir welding (FSW) of 5083-O Al alloy were evaluated. The results show that in FSW at 800 r/min and 124 mm/min, a weld defect is observed at the start point. However, the button shape at the end point is good and the stir zone has a soft appearance. At 267 mm/min, a void occurs at the button. A slight weld defect and rough stir zone are seen both at the start and end points at 342 mm/min. Moreover, at the bottom, a tunnel-type void is observed from an early stage to the end point, and at 1 800 r/min, a weld defect can be found from an early stage to the end point. These defects are rough with imperfect joining due to excessive rotation speed and high physical force. Weld fractures relative to rotational and travel speeds are observed at the stir zone. The optimum FSW conditions are a welding speed of 124 mm/min and a rotational speed of 800 r/min.

关键词：搅拌摩擦焊接摩擦特性机械性能铝合金焊缝缺陷评估优化氧

Mechanical and electrochemical characteristics in sea water of 5052-O aluminum alloy for ship

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2013年第3期23卷 636-641页

作者： Seong-Jong KIM Seok-Ki JANG Min-Su HAN jae-cheul park jae-Yong JEONG Sang-Ok CHONG Division of Marine Engineering Mokpo Maritime Univers ityHaeyangdaehak-ro 91 Mokpo-Si530-729Korea

The optimum corrosion protection potentials were examined for 5052-O Al alloy,which is mainly used in *** electrochemical experiments were carried out and the surface morphologies of specimens were observed by scanning electron microscopy（SEM） in order to determine the optimum corrosion protection potential to overcome pitting,corrosion,stress corrosion cracking（SCC）,and hydrogen embrittlement in sea *** optimum protection potential range of-1.3 V to-0.7 V was determined under the application of an impressed current cathodic protection（ICCP） *** low current densities were shown in the range of-1.3 V to-0.7 V in the electrochemical experiments and good specimen surface morphologies were observed after potentiostatic experiment.

关键词： aluminum alloy corrosion electrochemical characteristics stress corrosion cracking hydrogen embrittlement sea water corrosion cathodic protection

Synergistically coupling of Ni–Fe LDH arrays with hollow Co–Mo sulfide nanotriangles for highly efficient overall water splitting

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第2期43卷 522-532页

作者： Yun jae Lee Seung-Keun park Department of Advanced Materials Engineering Chung-Ang UniversityAnseongGyeonggi-do17546Republic of Korea Department of Intelligent Energy and Industry Chung-Ang University84 Heukseok-ro Dongjak-guSeoul06974Republic of Korea Western Seoul Center Korea Basic Science Institute150 Bugahyeon-roSeodaemun-guSeoul03759Republic of Korea

Developing bifunctional catalysts that can catalyze both oxygen evolution reaction(OER)and hydrogen evolution reaction(HER)is pivotal to commercializing large-scale water ***,a novel hollow nanotriangle composed of NiFe LDH-CoMoS_(x) heterojunction(H-CMSx@NiFe LDH)is proposed as a highly efficient bifunctional electrocatalyst for both OER and *** fabricate a heterojunction system,ultra-thin nickel–iron layered double hydroxide(NiFe LDH)nanosheets are uniformly electrodeposited onto a metal–organic framework-derived hollow CoMoS_(x) *** strong coupling of CoMoS_(x) and NiFe LDH catalysts forms the intimate heterojunction interfaces to facilitate interfacial charge transfer,which is favorable to enhance the bifunctional catalytic ***,the large void of CoMoS_(x) nanotriangles and interconnected ultra-thin NiFe LDH nanosheets result in good electrolyte penetration and gas ***,the as-prepared H-CMSx@NiFe LDH on nickel foam(NF)exhibits an impressive catalytic activity and durability for OER and HER activities,delivering a current density of 100 mA·cm^(−2) at the small overpotentials of 214 and 299 mV in OER and HER,***,H-CMSx@NiFe LDH/NF proves to be an effective electrode for an alkaline electrolyzer,as a voltage of only 1.99 V is enough to achieve a current density voltage of only 1.99 V is enough to achieve a current density of 400 mA·cm^(−2) with no degradation in performance over 50 h.

关键词： Overall water splitting Metal-organic framework Molybdenum sulfide Layered double hydroxide Heterojunction

Novel N-doped multichannel carbon nanofiber architecture with porous CoS nanoprisms for high-performance potassium-ion batteries

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第3期43卷 971-983页

作者： jae Bong Lim Seung-Keun park Department of Advanced Materials Engineering Chung-Ang UniversityGyeonggi-do17546Republic of Korea Department of Intelligence Energy and Industry Chung-Ang UniversitySeoul06974Republic of Korea Western Seoul Center Korea Basic Science InstituteSeoul03759Republic of Korea

Potassium-ion batteries(PIBs)have gained significant attention as an alternative to lithium-ion batteries(LIBs)due to the abundance of potassium(K)and low ***,the difficulty in finding appropriate electrode materials that can efficiently store the larger K ions has hindered their practical ***,we report a novel anode material,N-doped multichannel carbon nanofibers embedded with porous CoS nanoprisms(CSP@NMCNF),for high-performance *** CSP@NMCNF was synthesized using a two-step strategy comprising of the electrospinning of Co acetate hydroxide nanoprism/binary polymer blend and a subsequent heat *** porous CoS nanoprisms with an anisotropic morphology were well aligned along the length axis of the N-doped multichannel carbon nanofibers,thus ensuring their structural stability during the repeated charge-discharge *** addition,numerous pores facilitated the transport of electrons and ***,the CSP@NMCNF anode exhibited excellent electrochemical performance,delivering a high specific capacity of 368 mAh·g^(-1)at 0.5 A·g^(-1)after 200 cycles and excellent rate capability(232 mAh·g^(-1)at 2.0 A·g^(-1)).

关键词： K-ion batteries Cobalt sulfide Multichannel structured composite Electrospinning Nanoprism Porous structure

Electrochemically Deposited CZTSSe Thin Films for Monolithic Perovskite Tandem Solar Cells with Efficiencies Over 17%

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第1期7卷 147-152页

作者： Sun Kyung Hwang Ik jae park Se Won Seo jae Hyun park So Jeong park Jin Young Kim Department of Materials Science and Engineering Seoul National UniversitySeoul 08826Korea Department of Applied Physics Sookmyung Women's UniversitySeoul 04310Korea Research Institute of Advanced Materials and Systems Sookmyung Women's UniversitySeoul 04310Korea Research Institute of Advanced Materials(RIAM) Seoul National UniversitySeoul 08826Korea

In spite of the high potential economic feasibility of the tandem solar cells consisting of the halide perovskite and the kesterite Cu2ZnSn(S,Se)4(CZTSSe),they have rarely been demonstrated due to the difficulty in implementing solution-processed perovskite top cell on the rough surface of the bottom ***,we firstly demonstrate an efficient monolithic two-terminal perovskite/CZTSSe tandem solar cell by significantly reducing the surface roughness of the electrochemically deposited CZTSSe bottom *** surface roughness(R_(rms))of the CZTSSe thin film could be reduced from 424 to 86 nm by using the potentiostatic mode rather than using the conventional galvanostatic mode,which can be further reduced to 22 nm after the subsequent ion-milling *** perovskite top cell with a bandgap of 1.65 eV could be prepared using a solution process on the flattened CZTSSe bottom cell,resulting in the efficient perovskite/CZTSSe tandem solar *** the current matching between two subcells involving the thickness control of the perovskite layer,the best performing tandem device exhibited a high conversion efficiency of 17.5%without the hysteresis effect.

关键词： CZTSSe monolithic tandem solar cells perovskite solution process surface roughness control

Optimum traveling and rotation speeds in friction stir welding for dissimilar Al alloys

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2011年第7期21卷 1486-1490页

作者： jae-cheul park Min-Su HAN Seok-Ki JANG Seong-Jong KIM Division of Marine System Engineering Mokpo Maritime UniversityMokpo CityJeonnam530-729Korea

Aluminum alloys are subjected to large deformation and decreased strength due to the high expansion modulus caused by heat effects during friction stir welding （FSW）.The optimum conditions for friction stir welding of 5052-O and 6061-T6 Al alloys were *** optimum traveling and rotation speeds were identified to be 61mm/min and 1600r/min using various mechanical characteristic evaluation methods.

关键词： Al alloy friction stir welding (FSW) traveling speed rotation speed mechanical property

Validity of fatty liver prediction scores for diagnosis of fatty liver by Fibroscan

在线全文

学校读者我要写书评

暂无评论

Hepatobiliary & Pancreatic Diseases International 2024年第4期23卷 353-360页

作者： Seogsong Jeong Sun jae park Seong Kyun Na Sang Min park Byung-Cheol Song Yun Hwan Oh Department of Biomedical Sciences Seoul National University Graduate SchoolSeoul 03080Korea Department of Biomedical Informatics CHA University School of MedicineCHA UniversitySeongnam 13488Korea Department of Internal Medicine Inje University College of MedicineSeoul 50834Korea Department of Family Medicine Seoul National University HospitalSeoul National University College of MedicineSeoul 03080Korea Department of Internal Medicine Jeju National University HospitalJeju National University College of MedicineJeju 63241Korea Department of Family Medicine Jeju National University HospitalJeju National University College of MedicineJeju 63241Korea Department of Family Medicine Chung-Ang University Gwangmyeong HospitalChung-Ang University College of MedicineGwangmyeong 14353Korea

Background:The Korea National Health and Nutrition Examination Survey nonalcoholic fatty liver disease(K-NAFLD)score was recently developed with the intent to operationally define nonalcoholic fatty liver disease(NAFLD).However,there remained an external validation that confirmed its diagnostic performance,especially in patients with alcohol consumption or hepatitis virus ***:Diagnostic accuracy of the K-NAFLD score was evaluated in a hospital-based cohort consisting of 1388 participants who received Fibroscan®.Multivariate-adjusted logistic regression models and the contrast estimation of receiver operating characteristic curves were used for validation of the K-NAFLD score,fatty liver index(FLI),and hepatic steatosis index(HSI).Results:K-NAFLD-moderate[adjusted odds ratio(aOR)=2.53,95%confidence interval(CI):1.13-5.65]and K-NAFLD-high(aOR=4.14,95%CI:1.69-10.13)groups showed higher risks of fatty liver compared to the K-NAFLD-low group after adjustments for demographic and clinical characteristics,and FLI-moderate and FLI-high groups revealed aORs of 2.05(95%CI:1.22-3.43)and 1.51(95%CI:0.78-2.90),*** addition,the HSI was less predictive for Fibroscan®-defined fatty *** K-NAFLD and FLI also demonstrated high accuracy in the prediction of fatty liver in patients with alcohol consumption and chronic hepatitis virus infection,and the adjusted area under curve values were comparable between K-NAFLD and ***:Externally validation of the K-NAFLD and FLI showed that these scores may be a useful,noninvasive,and non-imaging modality for the identification of fatty *** addition,these scores also predicted fatty liver in patients with alcohol consumption and chronic hepatitis virus infection.

关键词： Nonalcoholic fatty liver disease Fatty liver index Hepatic steatosis index

Utilization of biomarkers for the prognostic prediction of cardiac arrest survivors using a multi-modal approach

在线全文

学校读者我要写书评

暂无评论

World Journal of Emergency Medicine 2024年第2期15卷 131-134页

作者： Changshin Kang Yeonho You Jung Soo park Byeong Kwon park jae Kwang Lee Byung Kook Lee Department of Emergency Medicine College of MedicineChungnam National UniversityDaejeon 35015Republic of Korea Department of Emergency Medicine Chungnam National University HospitalDaejoen 35015Republic of Korea Department of Emergency Medicine Konyang University HospitalCollege of MedicineDaejeon 35015Republic of Korea Department of Emergency Medicine Chonnam National University Medical SchoolChonnam National University HospitalGwangju 61469Republic of Korea

International guidelines for post-cardiac arrest care recommend using multi-modal strategies to avoid the withdrawal of life-sustaining therapy(WLST)in patients with the potential for neurological recovery.[1]However,a clear methodology for multi-modal approaches has yet to be ***-specific enolase(NSE)is currently the only recommended biomarker,and the European Resuscitation Council(ERC)and the European SocietyofIntensiveCareMedicine(ESICM)have proposed a cutoff value of 60μg/L at 48 and/or 72 h after the return of spontaneous circulation(ROSC)as a multimodal prognostic tool for predicting poor neurological outcomes.

关键词： cardiac modal return

Driving inward growth of lithium metal in hollow microcapsule hosts by heteroatom‐controlled nucleation

在线全文

学校读者我要写书评

暂无评论

Carbon Energy 2024年第8期6卷 262-272页

作者： Siwon Kim Hong Rim Shin Ki jae Kim Min‐Sik park Jong‐Won Lee Division of Materials Science and Engineering Hanyang UniversitySeoulRepublic of Korea Department of Energy Science and Engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)DaeguRepublic of Korea Department of Energy Science Sungkyunkwan UniversitySuwonRepublic of Korea Department of Advanced Materials Engineering for Information and Electronics Integrated Education for Frontier Science and Technology(BK21 Four)Kyung Hee UniversityYonginRepublic of Korea

The application of Li metal anodes in rechargeable batteries is impeded by safety issues arising from the severe volume changes and formation of dendritic Li ***‐dimensional hollow carbon is receiving increasing attention as a host material capable of accommodating Li metal inside its cavity;however,uncontrollable and nonuniform deposition of Li remains a *** this study,we synthesize metal–organic framework‐derived carbon microcapsules with heteroatom clusters(Zn and Ag)on the capsule walls and it is demonstrated that Ag‐assisted nucleation of Li metal alters the outward‐to‐inward growth in the microcapsule ***‐incorporated microcapsules are prepared via chemical etching of zeolitic imidazole framework‐8 polyhedra and are subsequently decorated with Ag by a galvanic displacement reaction between Ag^(+)and metallic *** introduced Ag significantly reduces the energy barrier and increases the reaction rate for Li nucleation in the microcapsule host upon Li *** combined electrochemical,microstructural,and computational studies,we verify the beneficial role of Ag‐assisted Li nucleation in facilitating inward growth inside the cavity of the microcapsule host and,in turn,enhancing electrochemical *** study provides new insights into the design of reversible host materials for practical Li metal batteries.

关键词： hollow carbon hosts lithium metal batteries lithium plating metal-organic frameworks nucleation