检索结果-南通市图书馆

High tibial osteotomy with human umbilical cord blood-derived mesenchymal stem cells implantation for knee cartilage regeneration

引用

World Journal of Stem Cells 2020年第6期12卷 514-526页

作者： Jun-Seob Song Ki-Taek Hong Chae-Gwan Kong Na-Min Kim jae-yub jung Han-Soo Park Young Ju Kim Ki Bong Chang Seok jung Kim Department of Orthopedic Surgery Gangnam JS HospitalSeoul 06053South Korea Department of Orthopedic Surgery College of MedicineThe Catholic University of KoreaUijeongbu-si 11765South Korea Department of Nursing Education&Administration Uijeongbu St.Mary’s HospitalThe Catholic University of KoreaUijeongbu-si 11765South Korea

BACKGROUND High tibial osteotomy(HTO)is a well-established method for the treatment of medial compartment osteoarthritis of the knee with varus ***,HTO alone cannot adequately repair the arthritic joint,necessitating cartilage regeneration *** regeneration procedures with concomitant HTO are used to improve the clinical outcome in patients with varus *** To evaluate cartilage regeneration after implantation of allogenic human umbilical cord blood-derived mesenchymal stem cells(hUCB-MSCs)with concomitant *** Data for patients who underwent implantation of hUCB-MSCs with concomitant HTO were *** patients included in this study were over 40 years old,had a varus deformity of more than 5°,and a full-thickness International Cartilage Repair Society(ICRS)grade IV articular cartilage lesion of more than 4 cm2 in the medial compartment of the *** patients underwent second-look arthroscopy during hardware *** regeneration was evaluated macroscopically using the ICRS grading system in second-look *** also assessed the effects of patient characteristics,such as trochlear lesions,age,and lesion size,using patient medical *** A total of 125 patients were included in the study,with an average age of 58.3±6.8 years(range:43-74 years old);95(76%)were female and 30(24%)were *** average hip-knee-ankle(HKA)angle for measuring varus deformity was 7.6°±2.4°(range:5.0-14.2°).In second-look arthroscopy,the status of medial femoral condyle(MFC)cartilage was as follows:73(58.4%)patients with ICRS grade I,37(29.6%)with ICRS grade II,and 15(12%)with ICRS grade *** patients were staged with ICRS grade ***,the scores[except International Knee Documentation Committee(IKDC)at 1 year]of the ICRS grade I group improved more significantly than those of the ICRS grade II and III *** Implantation of hUCB-MSCs with concomitant HTO is an effective treatment for patients wit

关键词： Allogeneic Human umbilical cord blood-derived mesenchymal stem cells Cartilage regeneration High tibial osteotomy Osteoarthritic knees Arthroscopy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Study on SCR De NO_x mechanism through in situ electrical conductivity measurements on V_2O_5-WO_3/TiO_2 catalysts

引用

Rare Metals 2006年第Z2期25卷 77-83页

作者： HA Heon Phil jung Soon Hyo LEE Jun yub HONG Sung Ho Metal Processing Research Center Korea Institute of Science and Technology Cheongryang Seoul 130-650 Republic of Korea Power Engineering Research Institute Korea Power Engineering Company Inc. 360-9 Mabuk-ri Guseong-eup Yongin-si Gyeonggi-do 449-713 Republic of Korea

V2O5-WO3/TiO2 catalysts were prepared by impregnation method and in situ electrical conductivity measurements were carried out to investigate the reaction mechanism for ammonia SCR (selective catalytic reduction) of NOx. The electrical conductivity change with ammonia supply and the increase of electrical conductivity were mainly caused by reduction of the labile surface oxygen. The electrical conductivity change of catalysts shows close relationship with the conversion rate of NOx. Variation of conversion rate in atmosphere without gaseous oxygen also supports that the labile lattice oxygen is indispensable in the initial stage of the de NOx reaction. These results suggest that the liable lattice oxygen acts decisive role in the de NOx mechanism. They also support that De NOx reaction occurs through the Eley-Rideal type mechanism. The amount of labile oxygen can be estimated from the measurement of electrical conductivity change for catalysts with ammonia supply.

关键词： De NOx selective catalytic reduction electrical conductivity lattice oxygen

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Prediction of Nitrogen Diffusivity in α-ferrite Based on Thermodynamics

引用

Journal of Iron and Steel Research International 2015年第8期22卷 743-745页

作者： jae-gil jung Seok-jae LEE Light Metal Division Korea Institute of Materials Science Division of Advanced Materials Engineering Research Center for Advanced Materials Development Chonbuk National University

A thermodynamic based equation to predict the diffusivity of nitrogen in α-ferrite was investigated in consideration of the equilibrium nitrogen concentration. The temperature-dependent jump distance calculated from the lattice parameter of ferrite was used to derive the frequency factor as a function of temperature. The calculation accuracy for nitrogen diffusivity using the proposed thermodynamic based equation was improved by comparing the calculation results using previous empirical equations based on Arrhenius type relationship with measured diffusivity of nitrogen for α-ferrite at different temperatures.

关键词： nitrogen diffusivity ct-ferrite thermodynamics prediction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Reduced interface energy loss in non-fullerene organic solar cells using room temperature-synthesized SnO2 quantum dots

引用

Journal of Materials Science & Technology 2020年第17期52卷 12-19页

作者： In Su Jin Minwoo Park jae Woong jung Department of Advanced Materials Engineering for Information&Electronics Kyung Hee University1732 Deogyeong-daeroGiheung-guYongin-siGyeonggi-do 446-701Republic of Korea Department of Chemical and Biological Engineering Sookmyung Women's UniversitySeoul 04310Republic of Korea

We herein report the room temperature synthesis of colloidal SnO2 quantum dots and their application in non-fullerene organic solar cells as an excellent electron transport *** thiourea-assisted hydrolysis at room temperature affords the nanocrystalline SnO2 quantum dots with a diameter of 3-4 *** utilization of the SnO2 quantum dots as an electron transporting layer effectively reduces the interfacial trap density and charge recombination in the solar cell devices,leading to not only the reduced energy loss but also excellent photocurrent *** optimized organic solar cells employing SnO2 quantum dots with polyethylenimine ethoxylated achieves power conversion efficiencies up to 12.023%with a VOC,a JSC,and a FF of 0.89 V,18.89 mA cm^–2,and *** work suggest that the SnO2 quantum dot is a promising electron transporting material to construct efficient organic solar cells for practical *** work also demonstrates the key strategy for thiourea-assisted hydrolysis to synthesize fine and nanocrystalline SnO2 quantum dots.

关键词： Energy loss Organic solar cells Interface SnO2 Quantum dots

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Simultaneously enhanced efficiency and ambient stability of inorganic perovskite solar cells by employing tetramethylammonium chloride additive in CsPbI2Br

引用

Journal of Materials Science & Technology 2022年第7期102卷 224-231页

作者： In Su Jin Bhaskar Parida jae Woong jung Department of Advanced Materials Engineering for Information and Electronics Kyung Hee University1732 Deogyeong-daeroGiheung-guYongin-siGyeonggi-do 446-701Republic of Korea Integrated Education Institute for Frontier Materials(BK21 Four) Kyung Hee University1732 Deogyeong-daeroGiheung-guYongin-siGyeonggi-do 446-701Republic of Korea

Although all-inorganic perovskites possess suitable bandgap and thermal stability for photovoltaic ap-plications,the unstable film morphologies,and poor moisture stabilities lag behind the organic-inorganic hybrid ***,we demonstrate that high qualityα-CsPbI_(2 ) Br films with improved phase sta-bility,high crystallinity,and pinhole-free film morphology was achieved by employing tetramethylammo-nium chloride(TMACl)as an *** a result,the TMACl-added CsPbI_(2) Br films exhibited high power conversion efficiency of 14.12%with an open-circuit voltage of 1.19 V,a short-circuit current density of 15.08 mA/cm^(2),and a fill factor of *** importantly,the TMACl addition imparts hydrophobicity to the film surface of CsPbI_(2) Br,which delivered excellent stability up to 30 days in the ambient condition and thermal stability at 85℃ for 156 h,***,the TMACl-added device also exhibited excellent PCE of 27.16%under indoor light source(1000 lux),which presents a promising approach for designing stable but high performance all-inorganic perovskite solar cells.

关键词： Inorganic perovskite solar cells CsPbI2Br Additive Tetramethylammonium chloride Efficiency

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Porous Microspheres Comprising CoSe2 Nanorods Coated with N-Doped Graphitic C and Polydopamine-Derived C as Anodes for Long-Lived Na-Ion Batteries

引用

Nano-Micro Letters 2022年第7期14卷 118-139页

作者： jae Seob Lee Rakesh Saroha jung Sang Cho Department of Engineering Chemistry Chungbuk National UniversityCheongjuChungbuk 361-763Republic of Korea

Metal–organic framework-templated nitrogen-doped graphitic carbon(NGC)and polydopaminederived carbon(PDA-derived C)-double coated one-dimensional CoSe_(2) nanorods supported highly porous threedimensional microspheres are introduced as anodes for excellent Na-ion batteries,particularly with long-lived cycle under carbonate-based electrolyte *** microspheres uniformly composed of ZIF-67 polyhedrons and polystyrene nanobeads(φ=40 nm)are synthesized using the facile spray pyrolysis technique,followed by the selenization process(P-CoSe_(2)@NGC NR).Further,the PDA-derived C-coated microspheres are obtained using a solution-based coating approach and the subsequent carbonization process(P-CoSe_(2)@PDA-C NR).The rational synthesis approach benefited from the synergistic effects of dual carbon coating,resulting in a highly conductive and porous nanostructure that could facilitate rapid diffusion of charge species along with efficient electrolyte infiltration and effectively channelize the volume ***,the prepared nanostructure exhibits extraordinary electrochemical performance,particularly the ultra-long cycle life *** instance,the advanced anode has a discharge capacity of 291(1000th cycle,average capacity decay of 0.017%)and 142 mAh g^(-1)(5000th cycle,average capacity decay of 0.011%)at a current density of 0.5 and 2.0 A g^(-1),respectively.

关键词： Spray pyrolysis Sodium-ion batteries Cobalt selenide nanorods Porous microspheres Dual carbon coating

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of homogenization temperature on microstructure and mechanical properties of high-speed-extruded Mg–5Bi–3Al alloy

引用

Journal of Magnesium and Alloys 2022年第10期10卷 2833-2846页

作者： jae Won Cha Sang-Cheol Jin jae-Gil jung Sung Hyuk Park School of Materials Science and Engineering Kyungpook National University80 DaehakroDaegu 41566Republic of Korea Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea

This study investigates the effects of billet homogenization temperature on the dynamic recrystallization behavior during high-speed extrusion and resultant microstructure and tensile properties of the Mg–5Bi–3Al(BA53,wt%)*** billets homogenized at 350 and450℃(350H and 450H billets)are extruded at a high speed of 69 m/*** 350H billet has a relatively smaller grain size and a higher abundance of fine Mg3Bi2particles compared to the 450H *** extrusion of the 350H billet,enhanced dynamic recrystallization occurs as a result of its finer grains and abundance of particles,while the growth of recrystallized grains is suppressed by the grain-boundary pinning effect of ***,the extruded 350H material is characterized by smaller grains,relatively greater number of Mg3Bi2particles,and a higher internal strain energy than the extruded 450H *** tensile strength of the extruded 350H material is higher than that of the extruded 450H material owing to stronger grain-boundary hardening,particle hardening,and strain hardening *** extruded 350H material also exhibits a higher tensile elongation as its smaller grains inhibit the formation of crack-inducing undesirable twins during *** results from this study demonstrate that a decrease in the homogenization temperature from 450 to 350℃leads to improved strength and ductility in the high-speed-extruded BA53 material.

关键词： Mg–Bi–Al alloy High-speed extrusion Homogenization Dynamic recrystallization Tensile properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Survival improvement and prognostic factors in recent management of extrahepatic cholangiocarcinoma:A single-center study

引用

Hepatobiliary & Pancreatic Diseases International 2020年第2期19卷 153-156页

作者： jung Wan Choe Hyo jung Kim jae Seon Kim Division of Gastroenterology Department of Internal MedicineKorea University Ansan HospitalKorea University College of Medicine516 Gojan-dongDanwon-guAnsan-siGyeonggi-do15355Korea Division of Gastroenterology Department of Internal MedicineKorea University Guro HospitalKorea University College of Medicine148 Gurodong-roGuro-guSeoul 08308Korea

Background:Cholangiocarcinoma was considered as a dismal disease with very poor prognosis until *** is increasingly found due to increased life *** surgical and medical management were advanced recently,data on the prognosis,especially extrahepatic cholangio-carcinoma(ECC),were *** study aimed to identify clinicopathologic features and prognosis of patients with ***:Patients followed up and diagnosed with ECC between January 2014 and December 2016 at a tertiary hospital were included,whereas those with intrahepatic cholangiocarcinoma,gallbladder cancer,and ampullary cancer were ***:A total of 83 patients were followed after the treatment(49 men and 34 women;median age 73.3 years).Cancer location was classified as distal common bile duct(25 patients),proximal com-mon bile duct(24 patients),common hepatic duct(20 patients),and hilar(14 patients).About 14.5%of patients had history of another malignant neoplasm,and 24.1%patients had chronic ***-cal resection was performed in 54 patients(65%)and dysplasia was combined in 63%(34/54).Adjuvant chemotherapy was performed in 54%(29/54),but only 7 underwent palliative chemotherapy in 29 non-surgical *** median overall survival in all patients was 30.9 *** analyzing the treatment modality,median survival of adjuvant chemotherapy,surgery only,palliative chemotherapy,and support-ive care groups were 42.9,30.9,12.0,and 8.9 months,respectively(P<0.05).In the Cox regression analy-sis of survival,age,surgical resection,chemotherapy,and comorbidity were significant prognostic factors,and the comorbidity was the only significant prognostic factor in the multivariable analysis(hazard ratio[HR]=2.80;95%CI:1.32–5.95;P=0.007).In a subgroup analysis of surgical patients,the presence of dysplasia was a favorable prognostic factor in the multivariable analysis(HR=0.29;95%CI:0.09–0.91;P=0.033).Conclusions:The overall survival of patients with ECC wa

关键词： Cholangiocarcinoma Survival Prognosis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Aerodynamic design optimization of helicopter rotor blades including airfoil shape for hover performance

引用

Chinese Journal of Aeronautics 2013年第1期26卷 1-8页

作者： Ngoc Anh Vu jae Woo Lee jung Il Shu Department of Aerospace Engineering Ho Chi Minh City University of Technology Department of Aerospace Information Engineering Konkuk University

This study proposes a process to obtain an optimal helicopter rotor blade shape for aerodynamic performance in hover flight. A new geometry representation algorithm which uses the class function/shape function transformation （CST） is employed to generate airfoil coordinates. With this approach, airfoil shape is considered in terms of design variables. The optimization process is constructed by integrating several programs developed by author. The design variables include twist, taper ratio, point of taper initiation, blade root chord, and coefficients of the airfoil distribution function. Aerodynamic constraints consist of limits on power available in hover and forward flight. The trim condition must be attainable. This paper considers rotor blade configuration for the hover flight condition only, so that the required power in hover is chosen as the objective function of the optimization problem. Sensitivity analysis of each design variable shows that airfoil shape has an important role in rotor performance. The optimum rotor blade reduces the required hover power by 7.4% and increases the figure of merit by 6.5%, which is a good improvement for rotor blade design.

关键词： Airfoil Design optimization Helicopter design Hover performance Planforms Rotor blades design

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fabrication and characterization of Ag flake hybrid circuits with IPL-sintering

引用

Journal of Materials Science & Technology 2020年第18期52卷 13-18页

作者： Choong-jae Lee Kwang-Ho jung Kyung Deuk Min Bum-Geun Park Seung-Boo jung School of Advanced Materials Science Engineering Sungkyunkwan University2066 Seobu-roJangan-guSuwon-si16419Republic of Korea Visual Display Business Samsung Electronics Co.Ltd.129Samsung-roYeongtong-guSuwon-si16677Republic of Korea

The study of photonic sintering has gained interest based on the advantages of fast processing at room ***,printed electronics made from photonic sintering with an intensive pulsed light(IPL)energy source exhibit more mechanical instability than those made from conventional thermal sintering *** solve the mechanical instability problems,we fabricated Ag flake hybrid pastes with a variety of concentrations of Ag flake(0,25,50,75,and 100 wt.%).All of the screen-printed hybrid Ag circuits were fabricated on polyimide substrates and were sintered at 3.5 *** porosity was analyzed using the Brunauer-Emmett-Teller *** IPC(Packaging Electronic Circuits)sliding test was performed to analyze the flexibility of the screen-printed Ag flake hybrid *** adhesion strength of the hybrid circuits was evaluated with a roll-type 90°peel *** hybrid Ag printed circuit showed improvements in both the flexibility and adhesion strength with the addition of Ag flake.

关键词： Low-temperature sintering Flexibility Flaky powders Adhesion strength Intensive pulsed light

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：