检索结果-南通市图书馆

Frontiers of Structural and Civil Engineering 2022年第4期16卷 506-514页

作者： Jinyoung YOON Byoung Il CHOI jae Hong kim Department of Structural Engineering Research Korea Institute of Civil Engineering and Building Technology(KICT)Goyang 10223Republic of Korea System Safety Research Department Korea Shipbuilding and Offshore EngineeringSeongnam 13591Republic of Korea Department of Civil and Environmental Engineering Korea Advanced Institute of Science and TechnologyDaejeon 34141Republic of Korea

The cement dispersion performance of a polycarboxylate(PCE)-based superplasticizer is highly related to their adsorption behaviors as a function of *** study evaluated effects of PCEs on rheological properties of cementitious ***,characteristics of PCEs were characterized via permeation chromatography(GPC)and Fourier-transform infrared spectrometry(FT-IR).The adsorption behavior of single and blended PCEs on cementitious composites was identified using total organic carbon analyzer(TOC).Based on the measurement of PCE adsorption,the changes of rheological properties of cementitious materials as well as the number of dispersed cement particles were characterized using a rheometer and laser spectroscopy,*** experimental results support the systematic mechanism of PCE adsorption,cement dispersion,and the decrease in viscosity of cementitious materials.

关键词： adsorption polycarboxylate superplasticizer rheology dispersion

Stents for colorectal obstruction:Past,present,and future

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2016年第2期22卷 842-852页

作者： Eui Joo kim Yoon jae kim Department of Internal Medicine Gachon University Gil Medical CenterIncheon 405-760South Korea

Since the development of uncovered self-expanding metal stents(SEMS) in the 1990 s, endoscopic stents have evolved dramatically. Application of new materialsand new designs has expanded the indications for enteral SEMS. At present, enteral stents are considered the first-line modality for palliative care, and numerous types of enteral stents are under development for extended clinical usage, beyond a merely palliative purpose. Herein, we will discuss the current status and the future development of lower enteral stents.

关键词： Colon Obstruction Stent Self-expandingmetal stents Self-expanding metal stents

Superelastic metastable Ti-Mo-Sn alloys with high elastic admissible strain for potential bio-implant applications

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2023年第32期163卷 45-58页

作者： Shuanglei Li jae H.kim Seung Won Kang jae Ho kim Tae-Hyun Nam Jong-Taek Yeom Titanium Alloys Department Metal Materials DivisionKorea Institute of Materials Science(KIMS)Changwon 51508Republic of Korea Department of Materials Engineering and Convergence Technology&Research Institute for Green Energy Convergence Technology(RIGET) Gyeongsang National University900 GazwadongJinjuGyeongnam 52828Republic of Korea

The demand for titanium alloys simultaneously having high elastic admissible strain and large recovery strain for bio-implant applications is ***-free Ti-based shape memory alloys are promising candidates for obtaining the required multifunctional *** this study,a wide content range of(0-15)wt%of low-cost,toxicity-free,and high-biocompatible Sn element was added to the Ti-8Mo(wt%)alloy to study its effect on the superelastic recovery and mechanical properties of biomedical Ti-Mo-Sn *** tailoring Sn content,desired multifunctional properties of high elastic admissible strain and room temperature superelasticity were achieved in the studied Ti-Mo-Sn *** was found that the increase in Sn content stabilized theβphase and a singleβphase was obtained at room temperature in Ti-8Mo-(13,15)Sn *** addition of Sn modified the lattice parameters of theα″martensite andβphase and affected the lattice deformation stain ofβ→α″.The lattice deformation strain along the[011]βdirection was found to be decreased by-0.26%/wt%*** room temperature superelasticity with a recovery strain of 3.1%and an elastic admissible strain of 1%was obtained in the Ti-8Mo-13Sn *** Sn content increased to 15 wt%,a high elastic admissible strain of 1.56%and a recovery strain of 2.0%were *** Ti-Mo-Sn alloys with excellent multifunctional properties are promising candidates for bio-implant applications.

关键词： Ti-Mo-Sn alloy Shape memory alloy Elastic admissible strain Elastic modulus Superelasticity

Origin of superior low-cycle fatigue resistance of an interstitial metastable high-entropy alloy

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2022年第20期115卷 115-128页

作者： Seyed Amir Arsalan Shams jae Wung Bae jae Nam kim Hyoung Seop kim Taekyung Lee Chong Soo Lee Graduate Institute of Ferrous Technology Pohang University of Science and TechnologyPohang 37673Republic of Korea Department of Materials Science and Engineering Pohang University of Science and TechnologyPohang 37673Republic of Korea School of Mechanical Engineering Pusan National UniversityBusan 46241Republic of Korea

In this study, the deformation behaviors and related microstructural evolutions were investigated in either monotonic or cyclic deformation modes in an interstitial metastable high-entropy alloy. These investigations aimed to reveal the mechanisms underlying the superior low-cycle fatigue(LCF) life of this alloy.A thermomechanical process was applied to induce fine-grained(FG) and coarse-grained(CG) microstructures in Fe–30Mn–10Co–10Cr–0.4C(atomic percentage) alloy. Their superior combination of strength and ductility was attributed to the appearance of deformation-induced ε-martensite and the presence of carbon. The CG alloy showed a greater volume fraction of ε-martensite than the FG alloy in the monotonic deformation mode, and vice versa in the cyclic mode. Such a disparity was interpreted in light of the back-stress effect of the relaxed γ-grain boundaries in the latter mode. Meanwhile, the γ-to-ε phase transformation under cyclic loading at low strain amplitudes(0.4%) barely led to an improved fatigue life as compared with that at higher strain amplitudes(≥ 0.55%). The high reversibility of partial dislocation motions under cyclic loading and delaying the formation of dislocation cells through the martensitic transformation could explain why the alloys investigated in this study exhibited a superior LCF life compared with high-entropy alloys reported in previous studies.

关键词： High-entropy alloy Transformation-induced plasticity Monotonic deformation Cyclic deformation Low-cycle fatigue Stacking faults

Distributed framework for yard planning in container terminals

在线全文

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2010年第12期11卷 992-997页

作者： Kap Hwan kim Xiao-hui ZHANG Department of Industrial Engineering Pusan National University Department of Logistics Information Technology Pusan National University

This study discusses a yard planning system,which considers various resources such as storage space,yard cranes,and traffic areas in container *** system is based on the function for estimating resource requirements of yard *** a given yard plan,the proposed system allows planners to check the feasibility of the plan which requires a certain amount of workload of resources in related blocks during a planning *** yard planning system in this study is aimed at balancing workloads among the blocks and providing the ability to modify current yard plans by detecting blocks and periods with overloaded *** system implements its planning function in a distributed manner in which planners construct yard plans under their individual control and send and receive only limited necessary information for the negotiation.

关键词： Workload Yard planning Container terminal Distributed planning

Implementation of configuration dependent stiffness proportional damping for the dynamics of rigid multi-block systems

在线全文

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2003年第1期2卷 87-98页

作者： Yun Byeong Chae jae Kwan kim R & D Division Chungsuk Engineering57Garak-dongSongpa-kuSeoul138-802Korea Assistant Engineer School of Civil Urban and Geosystem EngineeringSeoul National UniversitySeoul151-742Korea Associate Professor

The distinct element method(DEM)has been used successfully for the dynamic analysis of rigid block sys- *** of many difficulties associated with DEM is modeling of *** this paper,new procedures are proposed for the damping modeling and its numerical implementation in distinct element analysis of rigid muhi-block *** stiff- ness proportional damping is constructed for the prescribed damping ratio,based on the non-zero fundamental frequency ef- fective during the time interval while the boundary conditions remain essentially *** this time interval,the funda- mental frequency can be estimated without complete eigenvalue *** damping coefficients will vary while the damp- ing ratio remains the same throughout the entire analysis.A new numerical procedure is developed to prevent unnecessary energy loss that can occur during the separation *** procedures were implemented in the development of the dis- tinet element method for the dynamic analyses of piled multi-block *** analysis results |or the single-block and two-block systems were in a good agreement with the analytic *** to the seismic analyses of piled four- block systems revealed that the new procedures can make a significant difference and may lead to much-improved results.

关键词： multi-block systems stiffness proportional damping rocking impact distinet element method rigid body dynamics

Segregation of voiced and unvoiced components from residual of speech signal

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2012年第2期19卷 496-503页

作者： JO Cheol-woo kim jae-hee School of Mechatronics Changwon National University

In conventional source-filter models, voiced and unvoiced components were considered independently. However, in practice it was difficult to separate the source into two parts. An actual source consists of a mixture of two sources and the ratio varies according to the content or the intention of speaker. It had been investigated to separate the voiced and unvoiced components for different source models. Source signals were modeled based on the residual signal measured from inverse filtering. Three different source models were assumed. The parameters of each model were optimized for the original speech signal using a genetic algorithm. The resulting parameters were compared in terms of the mel-cepstral distance to the original signal, the spectrogram and the spectral envelope from the synthesized signal. The optimization method achieves an improvement of 15% for the Klatt model, but there is little improvement in the modified residual case.

关键词： voice source model synthesis optimization genetic algorithm

A nanofilter composed of carbon nanotube-silver composites for virus removal and antibacterial activity improvement

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2016年第4期28卷 275-283页

作者： Jun Pyo kim jae Ha kim Jieun kim Soo No Lee Han-Oh Park Nano Development Team Bioneer Corporation Daejeon 306-220 Republic of Korea

We have developed a new nanofilter using a carbon nanotube-silver composite material that is capable of efficiently removing waterborne viruses and *** nanofilter was subjected to plasma surface treatment to enhance its flow rate,which was improved by approximately 62%.Nanoscale pores were obtained by fabricating a carbon nanotube network and using nanoparticle fixation technology for the removal of *** pore size of the nanofilter was approximately 38 nm and the measured flow rate ranged from 21.0 to 97.2 L/（min·m^2）under a pressure of 1–6 kgf/cm^2 when the amount of loaded carbon nanotube-silver composite was 1.0 mg/cm^*** nanofilter was tested against Polio-,Noro-,and Coxsackie viruses using a sensitive real-time polymerase chain reaction assay to detect the presence of viral particles within the *** trace of viruses was found to flow through the nanofilter with carbon nanotube-silver composite loaded above 0.8 mg/cm^***,the surface of the filter has antibacterial properties to prevent bacterial clogging due to the presence of 20-nm silver nanoparticles,which were synthesized on the carbon nanotube surface.

关键词： Carbon nanotube Silver nanoparticle Virus removal Nanofilter Water purification

Prothrombin kringle-2, a mediator of microglial activation: new insight in Alzheimer’s disease pathogenesis

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2022年第12期17卷 2675-2676页

作者： jae Man Lee Sang Ryong kim Department of Biochemistry and Cell Biology Cell and Matrix Research InstituteSchool of MedicineKyungpook National UniversityDaeguKorea Brain Science and Engineering Institute Kyungpook National UniversityDaeguKorea School of Life Sciences BK21 FOUR KNU Creative BioResearch GroupInstitute of Life Science and BiotechnologyKyungpook National UniversityDaeguKorea

Microglial activation in Alzheimer’s disease(AD):In 1907,*** Alzheimer,a Bavarian-born German psychiatrist and neuropathologist,published an article describing the clinical and neuropathological features of an unclassified psychiatric *** disorder was later named AD and is currently the most common brain disorder(Takata et al.,2021).AD involves the accumulation of amyloid-β(Aβ)and hyperphosphorylated tau proteins in the brain,which are associated with senile plaques and neurofibrillary tangles,respectively(Vergara et al.,2019;Takata et al.,2021).AD is characterized by cognitive impairment and memory loss with hippocampal neurodegeneration(kim et al.,2021).

关键词： Alzheimer Aβ tau

Development of two-axis control index table driven by direct drive motors

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2011年第6期18卷 1962-1968页

作者： kim jae-hyun LEE Choon-man School of Mechatronics Changwon National University

The stability and reliability of a tilting index table should be considered at the design stage. A design method for the lightweight and improvement of the stability of the structure in a tilting index table was proposed using a commercial analysis program, ANSYS Workbench 12, by analyzing the static-thermal characteristics of the developed high-accuracy tilting index table at its design stage. The results of the performed structural analysis show that the maximum stress is generated at the stock tail part. An optimum design for the stock tail part was carried out to reduce the maximum stress and deformation. Also, the design variables were determined by considering the support of the stock tail part for the C-axis body. In the comparison of the results before and after the optimization, the maximum deformation and stress are improved by 2.8% and 8%, respectively.

关键词： tilting index table structural analysis modal analysis thermal analysis optimum design