检索结果-南通市图书馆

Friction 2024年第7期12卷 1564-1579页

作者： linlin DUAN dan JIA Jian li Jianfang liU Haitao DUAN State Key Laboratory of Special Surface Protection Materials and Application Technology Wuhan Research Institute of Materials ProtectionWuhan 430030China Hubei Longzhong Laboratory Xiangyang 441000China College of life Science and Technology Wuhan Polytechnic UniversityWuhan 430030China

In this work,the advantage of Coulomb repulsion in the intermolecular forces experienced by molecules on the solid–liquid nanosized contact interface is taken,and the superior friction-reducing property of Cu_(3)(PO_(4))2·3H_(2)O(CuP)oil-based additives has been confirmed for titanium ***-dimensional(3D)CuP nanoflowers(CuP-Fs)with a strong capillary absorption effect are prepared to achieve the homogeneous mixing of solid CuP and lubricating *** by CuP-Fs additives for titanium alloy,friction coefficient(COF)can be reduced by 73.68%,and wear rate(WR)reduced by 99.69%.It is demonstrated that the extraordinary friction-reducing property is due to the repulsive solid–liquid interface with low viscous shear force originating from Coulomb repulsion between polar water molecules in CuP and non-polar oil ***,any steric hindrance or connection between this repulsive solid–liquid interface will trigger the adhesion and increase the viscous shear force,for example,dispersant,hydrogen bondings,and shaky adsorbed water ***,the lamellar thickness of CuP and the molecular size of lubricant both have a great influence on tribological *** the lubrication mechanism based on interface Coulomb repulsion is proposed that may help broaden the scope of the exploration in low-friction nanomaterial design and new lubricant systems.

关键词： lubrication nanomaterial additive solid-liquid interface wear

Compound events of heatwave and dust storm in the Taklamakan Desert

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第7期67卷 2073-2083页

作者： Yuzhi liU Jianping HUANG Ziyuan TAN Chenglong ZHOU dan li Yongkun XIE Key Laboratory for Semi-Arid Climate Change of the Ministry of Education Lanzhou UniversityLanzhou 730000China Collaborative Innovation Center for Western Ecological Safety Lanzhou UniversityLanzhou 730000China Taklamakan National Station of Observation and Research for Desert Meteorology in Xinjiang Urumqi 830002China

Taklamakan Desert(TD)has been characterized by numerous heatwaves and dust storms,leading to negative effects on societies and ecosystems at regional and global ***,the association between heatwaves and dust storms is poorly *** this study,we describe the association between heatwaves and dust events and propose a mechanism for such compound events in the *** results show that,from 1993 to 2022,the frequency and intensity of heatwaves in the TD have increased at a rate of 0.21 days year^(-1)and 0.02℃ year^(-1),*** than 40% of heatwaves existed with dust events,which significantly lagged behind ***,the higher the air temperature,the hotter and drier the soil,leading to more dust emissions in the *** high-occurrence heatwave years,a large-scale wave train of“cyclone-anticyclone-cyclone”in the northwest-southeast direction was found,with the anticyclone of which hovered over the TD *** anomalous anticyclones favored the formation and maintenance of heatwaves,and subsequent anomalous cyclones in the wave train triggered strong dust events followed by *** climate warming,the compound events of heatwave and dust storm are becoming bigger hazards threatening the socioeconomic and ecological security in the TD,the profound study of which is critical to understanding regional extreme responses.

关键词： Heatwave Dust storm Compound events Taklamakan Desert

同方期刊数据库

A booming field of large animal model research

在线全文

学校读者我要写书评

暂无评论

Zoological Research 2024年第2期45卷 311-313页

作者： Xiao-jiang li liangxue Lai Guangdong Key Laboratory of Non-human Primate Research Key Laboratory of CNS Regeneration(Ministry of Education)GHM Institute of CNS RegenerationJinan UniversityGuangzhouGuangdong 510632China State Key Laboratory of Bioactive Molecules and Druggability Assessment Jinan UniversityGuangzhouGuangdong 510632China CAS Key Laboratory of Regenerative Biology Guangdong Provincial Key Laboratory of Stem Cell and Regenerative MedicineGuangzhou Institutes of Biomedicine and HealthChinese Academy of SciencesGuangzhouGuangdong 510530China

Animal models are integral to the study of fundamental biological processes and the etiology of human *** animal models,especially those involving mice,have yielded abundant and significant insights,greatly enhancing ... 详细信息

关键词： mechanisms insight field

Flow characteristics and hot workability of a typical low-alloy high-strength steel during multi-pass deformation

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 323-336页

作者： Mingjie Zhao lihong jiang Changmin li liang Huang Chaoyuan Sun Jianjun li Zhenghua Guo School of Aeronautical Manufacturing Engineering Nanchang Hangkong UniversityNanchang 330063China jiangxi Key Laboratory of Forming and Joining Technology for Aerospace Components Nanchang Hangkong UniversityNanchang 330063China State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China China National Erzhong Group Deyang Wanhang Die Forging Co.LTD. Deyang 618000China Hubei Huangshi Mold Industrial Technology Research Institute Huangshi 435007China

Heavy components of low-alloy high-strength(LAHS) steels are generally formed by multi-pass forging. It is necessary to explore the flow characteristics and hot workability of LAHS steels during the multi-pass forging process, which is beneficial to the formulation of actual processing parameters. In the study, the multi-pass hot compression experiments of a typical LAHS steel are carried out at a wide range of deformation temperatures and strain rates. It is found that the work hardening rate of the experimental material depends on deformation parameters and deformation passes, which is ascribed to the impacts of static and dynamic softening behaviors. A new model is established to describe the flow characteristics at various deformation passes. Compared to the classical Arrhenius model and modified Zerilli and Armstrong model, the newly proposed model shows higher prediction accuracy with a confidence level of 0.98565. Furthermore, the connection between power dissipation efficiency(PDE) and deformation parameters is revealed by analyzing the microstructures. The PDE cannot be utilized to reflect the efficiency of energy dissipation for microstructure evolution during the entire deformation process, but only to assess the efficiency of energy dissipation for microstructure evolution in a specific deformation parameter *** a result, an integrated processing map is proposed to better study the hot workability of the LAHS steel, which considers the effects of instability factor(IF), PDE, and distribution and size of grains. The optimized processing parameters for the multi-pass deformation process are the deformation parameters of 1223–1318 K and 0.01–0.08 s^(-1). Complete dynamic recrystallization occurs within the optimized processing parameters with an average grain size of 18.36–42.3 μm. This study will guide the optimization of the forging process of heavy components.

关键词： low-alloy high-strength steel work hardening rate constitutive model hot workability multi-pass deformation

Role of Multi-scale Hierarchical Structures in Regulating Wetting State and Wetting Properties of Structured Surfaces

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2024年第3期21卷 1347-1359页

作者： Yue jiang Xinyi li Zhichao Ma Zhihui Zhang Cuie Wen Zhonghao jiang Nan lin Luquan Ren Key Laboratory of Bionic Engineering of Ministry of Education College of Biological and Agricultural EngineeringJilin UniversityChangchun130022China Hubei Provincial Engineering Technology Research Center for Microgrid College of Electrical Engineering and New EnergyChina Three Gorges UniversityYichang443002China School of Mechanical and Aerospace Engineering Jilin UniversityChangchun130025China Centre for Additive Manufacturing School of EngineeringRMIT UniversityMelbourneVictoria3001Australia Key Laboratory of Automobile Materials of Ministry of Education College of Materials Science and EngineeringJilin UniversityChangchun130025China State Key Laboratory of Inorganic Synthesis and Preparative Chemistry Jilin UniversityChangchun130012China

Amplifying the intrinsic wettability of substrate material by changing the solid/liquid contact area is considered to be the main mechanism for controlling the wettability of rough or structured *** theoretical analysis and experimental exploration,we have found that in addition to this wettability structure amplification effect,the surface structure also simultaneously controls surface wettability by regulating the wetting state via changing the threshold Young angles of the Cassie-Baxter and Wenzel wetting *** wetting state regulation effect provides us with an alternative strategy to overcome the inherent limitation in surface chemistry by tailoring surface *** wetting state regulation effect created by multi-scale hierarchical structures is quite significant and plays is a crucial role in promoting the superhydrophobicity,superhydrophilicity and the transition between these two extreme wetting properties,as well as stabilizing the Cassie-Baxter superhydrophobic state on the fabricated lotus-like hierarchically structured Cu surface and the natural lotus leaf.

关键词： Hierarchical structure Wetting state regulation Wetting transition Superhydrophobicity Superhydrophilicity

Synergistic promotion of particulate matter reduction and production performance via adjusting electrochemical reactions in the zinc electrolysis industry

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & Engineering 2024年第1期18卷 23-33页

作者： Zizhen Ma Jingkun jiang Lei Duan jianguo Deng Fuyuan Xu Zehui li linhua jiang Ning Duan School of Environmental and Municipal Engineering Qingdao University of TechnologyQingdao 266520China State Key Joint Laboratory of Environmental Simulation and Pollution Control School of the EnvironmentTsinghua UniversityBeijing 100084China State Key Laboratory of Pollution Control and Resources Reuse College of Environmental Science and EngineeringTongji UniversityShanghai 200092China School of Physics Peking UniversityBeijing 100871China

Heavy particulate matter (PM) pollution and high energy consumption are the bottlenecks of hydrometallurgy, especially in the electrolysis process. Therefore, an urgent need is to explore PM reduction methods with production performance co-benefits. This study presents three PM reduction methods based on controlling operating parameters, i.e., lowering electrolyte temperature, H2SO4 concentration, and current density of the cathode. The optimized conditions were also investigated using the response surface methodology to balance the PM reduction effect and Zn production. The results showed that lowering electrolyte temperature is the most efficient, with an 89.0% reduction in the PM generation flux (GFPM). Reducing H2SO4 concentration led to the minimum side effects on the current efficiency of Zn deposition (CEZn) or power consumption (PC). With the premise of non-deteriorating CEZn and PC, GFPM can be reduced by 86.3% at the optimal condition (electrolyte temperature = 295 K, H2SO4 = 110 g/L, current density = 373 A/m^(2)). In addition, the reduction mechanism was elucidated by comprehensively analyzing bubble characteristics, electrochemical reactions, and surface tension. Results showed that lower electrolyte temperature inhibited the oxygen evolution reaction (OER) and compressed gas volume. Lower H2SO4 concentration inhibited the hydrogen evolution reaction (HER) and reduced electrolyte surface tension. Lower current density inhibited both OER and HER by decreasing the reaction current. The inhibited gas evolutions reduced the microbubbles’ number and size, thereby reducing GFPM. These results may provide energy-efficient PM reduction methods and theoretical hints of exploring cleaner PM reduction approaches for industrial electrolysis.

关键词： Zinc electrolysis Particulate matter Energy consumption Operating parameters Bubble characteristic Electrochemical reaction

Theory,technology and application of grouted bolting in soft rock roadways of deep coal mines

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1463-1479页

作者： Hongpu Kang Jianwei Yang Pengfei jiang Fuqiang Gao Wenzhou li Jiafeng li Huiyuan Chen Coal Mining Research Institute China Coal Technology and Engineering Group Co.Ltd.Beijing 100013China Coal Mining Branch China Coal Research InstituteBeijing 100013China State Key Laboratory of Intelligent Mining and Strata Control Beijing 100013China

The grouted bolt,combining rock bolting with grouting techniques,provides an effective solution for controlling the surrounding rock in deep soft rock and fractured *** has been extensively applied in numerous deep mining areas characterized by soft rock roadways,where it has demonstrated remarkable control *** article systematically explores the evolution of grouted bolting,covering its theoretical foundations,design methods,materials,construction processes,monitoring measures,and methods for assessing its *** overview encompassed several key elements,delving into anchoring theory and grouting reinforcement *** new principle of high pretensioned high-pressure splitting grouted bolting collaborative active control is introduced.A fresh method for dynamic information design is also *** discussion touches on both conventional grouting rock bolts and cable bolts,as well as innovative grouted rock bolts and cables characterized by their high pretension,strength,and sealing hole *** examination of the merits and demerits of standard inorganic and organic grouting materials versus the new inorganic–organic composite materials,including their specific application conditions,was ***,the article presents various methods and instruments to assess the support effect of grouting rock bolts,cable bolts,and grouting ***,it provides a foundation for understanding the factors influencing decisions on grouted bolting timing,the sequence of grouting,the pressure applied,the volume of grout used,and the strategic arrangement of grouted rock bolts and cable *** application of the high pretensioned high-pressure splitting grouted bolting collaborative control technology in a typical kilometer-deep soft rock mine in China—the soft coal seam and soft rock roadway in the Kouzidong coal mine,Huainan coal mining area,was ***,the existing problems in grouted bolting control

关键词： deep coal mine soft rock roadway grouted bolting rock bolt and cable grouting material high-pressure splitting grouting collaborative control technology

3D-printed MoS_(2)/Ni electrodes with excellent electro-catalytic performance and long-term stability for dechlorination of florfenicol

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第3期137卷 420-431页

作者： Jianhui Xu Pengxu Wang Shenggui Chen Lei li dan li Yunfei Zhang Qi Wu Jinhong Fan LumingMa School of Environment and Civil Engineering Dongguan University of TechnologyDongguan 523808China School of Art and Design Guangzhou Panyu PolytechnicGuangzhou 511483China National Engineering Research Center for Urban Pollution Control State Key Laboratory of Pollution Control and Resources ReuseCollege of Environmental Science and EngineeringTongji UniversityShanghai 200092China Dongguan Institute of Science and Technology Innovation Dongguan University of TechnologyDongguan 523808China School of Mechanical Engineering Dongguan University of TechnologyDongguan 523808China

Here,we report the production of 3D-printed MoS_(2)/Ni electrodes(3D-MoS_(2)/Ni)with longterm stability and excellent performance by the selective laser melting(SLM)*** a cathode,the obtained 3D-MoS_(2)/Ni could maintain a degradation rate above 94.0%for forfenicol(FLO)when repeatedly used 50 times in *** also found that the removal rate of FLO by 3D-MoS_(2)/Ni was about 12 times higher than that of 3D-printed pure Ni(3D-Ni),attributed to the improved accessibility of H^(*).In addition,the electrochemical characterization results showed that the electrochemically active surface area of the 3D-MoS_(2)/Ni electrode is about 3-fold higher than that of the 3D-Ni electrode while the electrical resistance is 4 times *** on tert-butanol suppression,electron paramagnetic resonance and triple quadrupole mass spectrometer experiments,a“dual path”mechanism and possible degradation pathway for the dechlorination of FLO by 3D-MoS_(2)/Ni were ***,we also investigated the impacts of the cathode potential and the initial pH of the solution on the degradation of ***,this study reveals that the SLM 3D printing technique is a promising approach for the rapid fabrication of high-stability metal electrodes,which could have broad application in the control of water contaminants in the environmental field.

关键词： 3D-print Electroreduction MoS_(2)/Ni Antibiotic Florfenicol

Plastid engineering with an efficient RNAi delivery system based on bacteriophage Ms2 virus-like particles enhances plant resistance to cotton bollworm

在线全文

学校读者我要写书评

暂无评论

Molecular Plant 2024年第7期17卷 987-989页

作者： Chunmei jiang Jinqiu Fu Fujun li Kai Xia Shengchun li ling Chang Ralph Bock jiang Zhang State Key Laboratory of Biocatalysis and Enzyme Engineering School of Life SciencesHubei Hongshan LaboratoryHubei UniversityWuhan 430062China Shenzhen Branch Guangdong Laboratory of Lingnan Modern AgricultureKey Laboratory of Synthetic BiologyMinistry of Agriculture and Rural AffairsAgricultural Genomics Institute at ShenzhenChinese Academy of Agricultural SciencesShenzhen518000China Max-Planck-Institut fur Molekulare Pflanzenphysiologie Am Muhlenberg 114476Potsdam-GolmGermany

Dear Editor,RNA-based pesticides are approaching the market,offering great potential to control agricultural pests such as the coleopteran insect Diabrotica virgifera virgifera(Head et al.,2017).However,application to lepidopteran pests has been hampered by their inconsistent response to RNA interference(RNAi).As a notorious lepidoptera pest,Helicoverpa armigera feeds on over 300 species of host plants(Fu et al.,2022).Although transgenicplants expressingdouble-stranded RNAs or microRNAs that target essential insect genes can inhibit the growth of larvae,complete protection of the plants and efficient killing of this insect have not been achieved(Bally et al.,2020;Chung et al.,2021;li et al.,2023).The relatively low RNAi efficiency in lepidopterans is mainly attributable to the degradation and intracellular sequestration of double-stranded RNA(Shukla et al.,2016;Zhu and Palli,2020).To overcome these obstacles and improve RNAi efficiency in ***,we attempted to deliver RNAi molecules using a bacteriophage MS2 virus-like particle(VLP)-based delivery system(Wang et al.,2016).

关键词： overcome offering approaching

MXenes/CNTs-based hybrids:Fabrications,mechanisms,and modification strategies for energy and environmental applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第5期17卷 3429-3454页

作者： Jizhou jiang Fangyi li Lei Ding Chengxun Zhang Arramel Xin li School of Environmental Ecology and Biological Engineering School of Chemistry and Environmental EngineeringKey Laboratory of Green Chemical Engineering Process of Ministry of EducationEngineering Research Center of Phosphorus Resources Development and Utilization of Ministry of EducationNovel Catalytic Materials of Hubei Engineering Research CenterWuhan Institute of TechnologyWuhan 430205China Nano Center Indonesia Jl.PUSPIPTEK Tangerang SelatanBanten 15314Indonesia Institute of Biomass Engineering Key Laboratory of Energy Plants Resource and UtilizationMinistry of Agriculture and Rural AffairsSouth China Agricultural UniversityGuangzhou 510642China

Emerging two-dimensional(2D)layered metal carbide and nitride materials,commonly termed MXenes,are increasingly recognized for their applications across diverse fields such as energy,environment,and *** the past few years,MXenes/carbon nanotubes(CNTs)-based hybrids have attracted extensive attention as an important catalyst in energy and environmental fields,due to their superior multifunctions and mechanical *** review aims to address the fabrication strategies,the identification of the enhancement mechanisms,and recent progress regarding the design and modification of MXenes/CNTs-based hybrids.A myriad of fabrication techniques have been systematically summarized,including mechanical mixing,spray drying,three-dimensional(3D)printing,self-assembly/in-situ growth,freeze drying,templating,hydrothermal methods,chemical vapor deposition(CVD),and ***,the identification of the enhancement mechanisms was thoroughly discussed from the two dimensions of theoretical simulations and in-situ ***,the recent advancements in profound applications of MXenes/CNTs-based hybrids have also been carefully revealed,including energy storage devices,sensors,water purification systems,and microwave *** also underscore anticipated challenges related to their fabrication,structure,underlying mechanisms,modification approaches,and emergent ***,this review offers insights into prospective directions and the future trajectory for these promising *** is expected that this review can inspire new ideas or provide new research methods for future studies.

关键词： MXenes/carbon nanotubes(CNTs)-based hybrids fabrication applications modification strategies