检索结果-南通市图书馆

Chinese Journal of Structural Chemistry 2019年第5期38卷 688-694,667页

作者： LIU Tao jia jin-zhang LI Bu-Tong GAO Ke Department of Basic Teaching Liaoning Technical University Huludao 125105 China College of Safety Science and Engineering Liaoning Technical University Huludao 125105 China Key Laboratory of Mine Thermo-motive Disaster and Prevention Ministry of Education Huludao 125105 China College of Mining and Technology Liaoning Technical University Huludao 125105 China

The packed density, detonation velocities, and detonation pressures of a series of cyclopropane derivatives were investigated to look for high energy density compounds. For exploring the possibility of synthesis, the bond order, heats of formation(HOF), bond dissociation energy(BDE), and characteristic height were calculated. Based on our results, A3 has the best detonation characters. Both A1 and A2 showed comparative detonation parameters and compact sensitivity with RDX, and could be regarded as the candidates of high energy density *** the heats of formation and explosive heats rose with the increase of nitrimino groups and the strain energy of three-membered ring. For A1 compound, pyrolysis mechanism might be a mix one(breakages of C–C and N–NO2 bonds). However, for A2 and A3 compounds, the N–NO2 is the trigger bond in explosive reactions. Our results may provide the basic information for further study of this kind of compounds.

关键词： high energy density compounds cyclopropane derivatives detonation performance atomization reaction

Separation of the ionospheric and thermospheric contributions in the data from the Triple Ionosophere Photo Meter onboard the Feng-Yun 3E satellite

在线全文

学校读者我要写书评

暂无评论

Science China Earth Sciences 2025年第1期68卷 172-184页

作者： Fang jiaNG Tian MAO jin-Song WANG Xiu-Qing HU Xiao-Xin zhang Liping FU Nan jia Tianfang WANG National Space Science Center Chinese Academy of Sciences Beijing Key Laboratory of Space Environment Exploration Key Laboratory of Environmental Space Situation Awareness Technology National Satellite Meteorological Center China Meteorological Administration

The Triple Ionosphere Photo Meter （TRIPM） is a far ultraviolet nadir-view photometer that is onboard the secondgeneration,polar-orbiting Chinese meteorological satellite Feng-Yun 3E （FY-3E）,which was launched on July 5,*** has three channels,and each is used to measure different types of emissions:（1） 135.6 nm airglow produced by the recombination of the O+ions and electrons in the absence of sunlight （nighttime channel）;（2） 135.6 nm airglow from the OI when sunlight is present （daytime/dusk-dawn 135.6 nm channel）;and （3） Airglow in the N2LBH of the TRIPM （daytime/dusk-dawn N2LBH channel）.FY-3E is a satellite operating in the early morning ***,the data are mostly distributed on the dawndusk side or at times when the solar zenith angle is relatively *** this study,combined with simulation calculations,the data are *** further explore the application value of the data products,a model is used to separate the ionospheric radiative recombination contribution from the thermosphere photoelectron impact excitation contribution in the data from the daytime/dusk-dawn 135.6 nm *** approach not only improves the accuracy of O/N2derived from the 135.6 nm channel and N2LBH channel but also provides the ionospheric 135.6 nm radiance at the same time as the *** results show that the 135.6 nm radiance originating from the combination of O+and electrons extracted from the measurement data exhibits similar equatorial anomaly peak structure characteristics and seasonal variations as the corresponding GPS total electron content （TEC） *** the other hand,the separated 135.6 nm radiance generated from the thermosphere photoelectron collision excitation does not contain radiative recombination contributions;thus,the ionosphere influence is greatly avoided when the O/N2is obtained.

关键词： Far ultraviolet 135.6 nm emission intensity Photoelectron impact excitation Radiative recombination excitation

同方期刊数据库

在线全文

学校读者我要写书评

暂无评论

矿井火灾仿真与避灾路线的数学模型

自然灾害学报 2008年第1期17卷 163-168页

作者：贾进章辽宁工程技术大学安全科学与工程学院辽宁阜新123000

矿井火灾具有突发性、火势发展迅猛以及灭火和救护困难等特点。火灾燃烧时产生大的热量和有毒有害的气体,并形成火风压。火势的动力作用,容易造成风流状态的紊乱,甚至造成整个通风系统风流状态的混乱,由此造成的损失极为惨重。矿井火灾... 详细信息

矿井火灾具有突发性、火势发展迅猛以及灭火和救护困难等特点。火灾燃烧时产生大的热量和有毒有害的气体,并形成火风压。火势的动力作用,容易造成风流状态的紊乱,甚至造成整个通风系统风流状态的混乱,由此造成的损失极为惨重。矿井火灾仿真研究对于制定火灾预案具有重要的指导意义。由于矿井系统本身的复杂性及其有限的出口通道,以及灾变对矿井系统的影响,人员的避灾路线常常被灾变及其生成物所阻断。正因为这种复杂性,在紧急状态下依靠人工手段来提供避灾路线是不可能的,在计算机及其应用技术日趋成熟的今天,开发一套适合现场应用的避灾路线选择系统既现实又重要。提出了基于流体网络的矿井火灾仿真数学模型和避灾路线数学模型,并编制了相应的程序。该模型在金川有色金属公司二矿区进行了应用,取得了良好的效果。

关键词：矿井火灾仿真避灾

Tradeoff Analysis for RMS of Equipment Based Operation Availability and Life Cycle Cost

在线全文

学校读者我要写书评

暂无评论

International Journal of Plant Engineering and Management 2010年第1期15卷 18-21页

作者： GENG Jun-bao jin jia-shan zhang Jun College of Naval Architecture and Power Naval University of Engineering Wuhan 430033 P.R. China

Reliability, maintainability, supportability （RMS） are the important performance indexes of equipment, which affect not only the availability, but also the life cycle cost （LCC） of the equipment. First discussed is the qualitative relation between reliability and LCC and the costs which may be used to enhance the reliability. Secondly, the factors that affect the maintainability are summarized, and if maintainability is advanced, the trend of the LCC is depicted. Thirdly, the qualitative relation between the supportability and LCC is described. Reliability, maintainability and supportability index all have a relation with the availability, so this paper presents the tradeoff for RMS indexes based on the availability calculation models and LCC models. On the condition that the availability value is not below the given value, the decision-making is optimal if the life cycle cost is the minimum value.

关键词： life cycle cost reliability maintainability supportability availability

在线全文

学校读者我要写书评

暂无评论

矿井火灾时期通风系统动态可靠性数值分析

自然灾害学报 2008年第2期17卷 99-102页

作者：贾进章辽宁工程技术大学安全科学与工程学院辽宁阜新123000

通过分析矿井火灾时期的风流特点,提出了矿井火灾时期的风路失效模式,指出矿井火灾时期的通风系统可靠度是个动态变化过程,随着时间的推移,整个通风系统的可靠度会逐渐下降。提出了适于计算大型通风系统火灾时期可靠度的"基于截断误差... 详细信息

通过分析矿井火灾时期的风流特点,提出了矿井火灾时期的风路失效模式,指出矿井火灾时期的通风系统可靠度是个动态变化过程,随着时间的推移,整个通风系统的可靠度会逐渐下降。提出了适于计算大型通风系统火灾时期可靠度的"基于截断误差理论和网络简化技术的不交化最小路集算法"。在此基础上,对矿井火灾时期通风系统的动态可靠度进行了数值模拟。

关键词：矿井火灾通风系统可靠性失效

Thickness and sp3 bond modulation of（Ti/tetrahedral amorphous carbon）_n multilayer coatings

在线全文

学校读者我要写书评

暂无评论

Tungsten 2025年第1期7卷 152-160页

作者： Zhi-Jun Xie jia-Lin Li Ling Gong Xiang-Li Zhong Hong-jia Song jin-Bin Wang National-Provincial Laboratory of Special Function Thin Film Materials School of Materials Science and Engineering Xiangtan University

The durability of wear-resistant tetrahedral amorphous carbon（ta-C） coatings is intimately linked to their thickness and the concentration of *** enhance the lifespan of the coatings,we have prepared a multilayer coating consisting of alternating layers of Ti and ta-C,denoted as（Ti/ta-C）_n,using arc ion plating.A multi-layer structure in conjunction with stage cooling is employed to enhance the thickness and promote *** results indicate that the ID/IGvalue,representing the ratio of the intensity of the D peak to that of the G peak in Raman spectroscopy,decreases from 0.85 when no stage cooling is applied to 0.35 when stage cooling is employed,suggesting an enhancement in the fraction of sp3bonds within the *** obtained（Ti/ta-C）_n multilayer coating without peeling off has a maximum thickness of 1.14 μm,which is almost double that of the ta-C coating single layer *** the same time,the coating has a low coefficient of friction,down to 0.069,and maintains excellent friction properties with a wear rate of 3.4×10-6mm3·N-1·*** results conclusively show that the preparation technology can enhance both thickness and sp3bonding in ta-C coatings,significantly expanding their utility across tools,molds,and precision engineering components.

关键词： Arc ion plating Multilayer structure sp3 bond Ta-C coating Wear resistance

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

矿井通风系统抗灾变能力评价指标体系

自然灾害学报 2007年第6期16卷 195-198页

作者：贾进章辽宁工程技术大学安全科学与工程学院辽宁阜新123000

矿井通风系统抗灾变能力的确定和提高对于矿山减灾救灾具有重要意义。在通风系统抗灾变能力评价中,指标体系的选取至关重要。根据矿井火灾、救灾、防灾的具体情况及相关文献,从防火措施、防火管理、指挥救灾和井下工人救火素质4方面选取... 详细信息

矿井通风系统抗灾变能力的确定和提高对于矿山减灾救灾具有重要意义。在通风系统抗灾变能力评价中,指标体系的选取至关重要。根据矿井火灾、救灾、防灾的具体情况及相关文献,从防火措施、防火管理、指挥救灾和井下工人救火素质4方面选取了22个指标,确定了矿井通风系统抗灾变能力的模糊综合评价指标体系,给出了矿井通风系统抗灾变能力指标分级界定值,并采用层次分析法对各个指标的重要性进行排序,提出了通风系统抗灾变能力层次分析结构模型。

关键词：通风系统灾变评价指标体系隶属函数

A Review on Thermal Management of Li-ion Battery:from Small-Scale Battery Module to Large-Scale Electrochemical Energy Storage Power Station

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2025年第1期34卷 1-23页

作者： CHEN Zhifeng jia Li YIN Liaofei DANG Chao REN Honglei zhang Zhiqiang Beijing Key Laboratory of Flow and Heat Transfer of Phase Changing in Micro and Small Scale School of MechanicalElectronic and Control EngineeringBeijing Jiaotong University

Li-ion battery is an essential component and energy storage unit for the evolution of electric vehicles and energy storage technology in the ***,in order to cope with the temperature sensitivity of Li-ion battery and maintain Li-ion battery safe operation,it is of great necessary to adopt an appropriate battery thermal management system(BTMS).In this paper,the current main BTM strategies and research hotspots were discussed from two aspects:small-scale battery module and large-scale electrochemical energy storage power station(EESPS).The practical application situation,advantages and disadvantages,and the future development trend of each heat dissipation method(air,liquid,PCM,heat pipe,hybrid cooling) were described in *** them,the air cooling and liquid cooling were reviewed in-depth based on the engineering *** PCM,heat pipe and hybrid cooling were reviewed extensively based on the latest *** research provides a comprehensive understanding for the BTMS in all scales.

关键词： battery thermal management cooling methods large-scale electrochemical energy storage power station small-scale battery module

High-dense nanocrystalline W-based alloy prepared by hot isostatic pressing with uniform microstructure, ultrahigh hardness and good thermal stability

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Tungsten 2025年第1期7卷 120-136页

作者： Zao-Ming Wu Lin He Lin-Sen Ye Xiao-Feng Yang jia-jia zhang Hong-Bo Lei Institute of Materials China Academy of Engineering Physics

High-density uniform microstructure nanocrystalline W-10wt.% Cr-5wt.% Y（W-10Cr-5Y） alloy with an average grain size of 85 nm and a relative density of 99.8% was successfully prepared.W-Cr-Y alloys with different amounts of second-phase particles were prepared by high-energy ball milling and hot isostatic pressing *** effects of composition design,ball milling parameters,and sintering parameters on the microstructure of W-Cr-Y alloys were studied.A feasible technology for controlling the synthesis of high-density nanocrystalline W-based alloys has been *** microstructure analysis of nanocrystalline W-10Cr-5Y alloy shows that there are two types of doping in the second phase:intergranular doping and intragranular *** "uniform distribution YOx-rich particles" effectively suppresses the grain growth of W and leads to the formation of nanocrystalline W-10Cr-5Y alloy.W-10Cr-5Y has an ultra-high hardness,with a Vickers hardness of 1312±12 kgf·***-temperature annealing treatment shows that W-10Cr-5Y has good thermal stability at 1000 and1100℃,as demonstrated by the comparison of Vickers hardness and grain size between annealed and unannealed alloys.

关键词： Hot isostatic pressing Microstructure Nanocrystalline tungsten Thermal stability Vickers hardness

Viscosity and structure relationship with equimolar substitution of CaO with MgO in the CaO–MgO–Al_(2)O_(3)–SiO_(2)slag melts

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 70-79页

作者： Yong Hou Shuo zhang Jie Dang jia Guo Hanghang Zhou Xuewei Lü College of Materials Science and Engineering Chongqing UniversityChongqing 400044China Chongqing Key Laboratory of Vanadium-Titanium Metallurgy and New Materials Chongqing UniversityChongqing 400044China

Currently,the Al_(2)O_(3)content in the high-alumina slag systems within blast furnaces is generally limited to 16wt%–18.5wt%,making it challenging to overcome this *** most studies that concentrated on managing the MgO/Al_(2)O_(3)ratio or basicity,this paper explored the effect of equimolar substitution of MgO for CaO on the viscosity and structure of a high-alumina CaO-MgO-Al_(2)O_(3)-SiO_(2)slag system,providing theoretical guidance and data to facilitate the application of high-alumina *** results revealed that the viscosity first decreased and then increased with higher MgO substitution,reaching a minimum at 15mol%MgO *** transform infrared spectroscopy(FTIR)results found that the depths of the troughs representing[SiO_(4)]tetrahedra,[AlO_(4)]tetrahedra,and Si-O-Al bending became progressively deeper with increased MgO *** of the Raman spectra showed that the average number of bridging oxygens per Si atom and the X_(Q^(3))/X_(Q^(2))(X_(Q^(i))is the molar fraction of Q^(i) unit,and i is the number of bridging oxygens in a[SiO_(4)]tetrahedral unit)ratio increased from 2.30 and 1.02 to 2.52 and 2.14,respectively,indicating a progressive polymerization of the silicate structure.X-ray photoelectron spectroscopy(XPS)results highlighted that non-bridging oxygen content decreased from 77.97mol% to 63.41mol% with increasing MgO concentration,whereas bridging oxygen and free oxygen contents *** analysis demonstrated a gradual increase in the polymerization degree of the tetrahedral structure with the increase in MgO ***,bond strength is another important factor affecting the slag *** occurrence of a viscosity minimum can be attributed to the complex evolution of bond strengths of non-bridging oxygens generated during depolymerization of the[SiO_(4)]and[AlO_(4)]tetrahedral structures by CaO and MgO.

关键词： aluminosilicate viscosity structure spectroscopy