检索结果-南通市图书馆

A DiscreteMulti-Objective squirrel search Algorithm for Energy-Efficient Distributed Heterogeneous Permutation Flowshop with Variable Processing speed

在线全文

学校读者我要写书评

暂无评论

Computers, Materials and Continua 2024年第1期81卷 1757-1787页

作者： Zeng l. Ding Z. shi j. Wang s. school of Electrical and Electronic Engineering Hubei University of Technology Wuhan 430068 China Hubei Key laboratory for High-Efficiency Utilization of solar Energy and Operation Control of Energy storage system Hubei University of Technology Wuhan 430068 China Xiangyang Industrial Institute of Hubei University of Technology Xiangyang 441100 China

In the manufacturing industry, reasonable scheduling can greatly improve production efficiency, while excessive resource consumption highlights the growing significance of energy conservation in production. This paper studies the problem of energy-efficient distributed heterogeneous permutation flowshop problem with variable processing speed (DHPFsP-VPs), considering both theminimum makespan and total energy consumption (TEC) as objectives. A discrete multi-objective squirrel search algorithm (DMssA) is proposed to solve the DHPFsPVPs. DMssA makes four improvements based on the squirrel search algorithm. Firstly, in terms of the population initialization strategy, four hybrid initialization methods targeting different objectives are proposed to enhance the quality of initial solutions. secondly, enhancements are made to the population hierarchy system and position updating methods of the squirrel search algorithm, making it more suitable for discrete scheduling problems. Additionally, regarding the search strategy, six local searches are designed based on problem characteristics to enhance search capability. Moreover, a dynamic predator strategy based on Q-learning is devised to effectively balanceDMssA's capability for global exploration and local exploitation. Finally, two speed control energy-efficient strategies are designed to reduce TEC. Extensive comparative experiments are conducted in this paper to validate the effectiveness of the proposed strategies. The results of comparing DMssA with other algorithms demonstrate its superior performance and its potential for efficient solving of the DHPFsP-VPs problem. © 2024 The Authors. Published by Tech science Press.

关键词： Distributed heterogeneous permutation flowshop problem energy-efficient squirrel search algorithm muli-objective optimization variable processing speed

Decorating crystalline YFe_(2-x)Al_(x) on the Mg_(60)la_(10)Ni_(20)Cu_(10) amorphous alloy as “hydrogen pump” to realize fast de/hydrogenation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Materials science & Technology 2024年第6期173卷 72-79页

作者： l.j.Huang H.Wang l.Z.Ouyang M.Zhu H.j.lin school of Materials science and Engineering Key Laboratory of Advanced Energy Storage Materials of Guangdong ProvinceSouth China University of TechnologyGuangzhou 510641China Institute of Advanced Wear&Corrosion Resistance and Functional Materials Jinan UniversityGuangzhou 510632China

Mg-based amorphous alloys are one of the potential hydrogen storage materials but suffer from sluggish dehydrogenation/hydrogenation(de/hydrogenation)*** this work,as a new strategy,a hydrogen pump is built on the surface of amorphous alloys to solve this *** milling crystalline YFe_(2-x)Al_(x) hydrogen storage alloy with Mg_(60)la_(10)Ni_(20)Cu_(10) amorphous alloy,fine crystalline particles were seeded on amorphous alloy powder to form a“strawberry”*** to the TEM observation,a metallurgical bonding boundary formed between the Mg-based amorphous matrix and the Y-Fe-Al crystalline *** microstructure and de/hydrogenation kinetics investigation,the“hydrogen pump”effect of the seeded crystalline alloy was confirmed,which makes it much easier for the hydrogen to dissociate on and diffuse through the surface of the Mg-based amorphous *** such effect,the H absorption rate of Mg_(60)la_(10)Ni_(20)Cu_(10) amorphous alloy became almost eight times faster and it absorbs ~2.8 wt.% in 1 h at 130℃ under 4.5 MPa-H_(2).Further,fast hydrogenation can even achieve at 70℃ and the low-temperature dehydrogenation kinetics of the amorphous hydride can be also greatly *** present work proves that surface modification is of great importance for obtaining Mg-based amorphous alloy with ideal hydrogen storage performance.

关键词： Hydrogen storage Mg-based amorphous alloy Hydrogen pump Composite structure

A facile strategy for tuning the density of surface-grafted biomolecules for melt extrusion-based additive manufacturing applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bio-Design and Manufacturing 2024年第3期7卷 277-291页

作者： I.A.O.Beeren G.Dos santos P.j.Dijkstra C.Mota j.Bauer H.Ferreira Rui l.Reis N.Neves s.Camarero-Espinosa M.B.Baker l.Moroni Department of Complex Tissue Regeneration MERLN Institute for Technology-Inspired Regenerative MedicineMaastricht University6229 ER MaastrichtThe Netherlands 3B’s Research Group I3Bs–Research Institute on BiomaterialsBiodegradables and BiomimeticsHeadquarters of the European Institute of Excellence on Tissue Engineering and Regenerative MedicineUniversity of MinhoAveParkZona Industrial da Gandra4805-017 BarcoGuimarãesPortugal ICVs/3B’s-PT Government Associate laboratory 4806-909 Braga/GuimarãesPortugal POlYMAT University of the Basque Country UPV/EHU20018 Donostia/San SebastiánSpain IKERBAsQUE Basque Foundation for Science48009 BilbaoSpain

Melt extrusion-based additive manufacturing(ME-AM)is a promising technique to fabricate porous scaffolds for tissue engi-neering ***,most synthetic semicrystalline polymers do not possess the intrinsic biological activity required to control cell *** of biomolecules on polymeric surfaces of AM scaffolds enhances the bioactivity of a construct;however,there are limited strategies available to control the surface ***,we report a strategy to tune the surface density of bioactive groups by blending a low molecular weight poly(ε-caprolactone)5k(PCl5k)containing orthogonally reactive azide groups with an unfunctionalized high molecular weight PCl75k at different *** porous three-dimensional(3D)scaf-folds were then fabricated using a high weight percentage(75 wt.%)of the low molecular weight PCl *** a proof-of-concept test,we prepared films of three different mass ratios of low and high molecular weight polymers with a thermopress and reacted with an alkynated fluorescent model compound on the surface,yielding a density of 201-561 pmol/cm^(2).subsequently,a bone morphogenetic protein 2(BMP-2)-derived peptide was grafted onto the films comprising different blend compositions,and the effect of peptide surface density on the osteogenic differentiation of human mesenchymal stromal cells(hMsCs)was *** two weeks of culturing in a basic medium,cells expressed higher levels of BMP receptor II(BMPRII)on films with the conjugated *** addition,we found that alkaline phosphatase activity was only significantly enhanced on films contain-ing the highest peptide density(i.e.,561 pmol/cm^(2)),indicating the importance of the surface *** together,these results emphasize that the density of surface peptides on cell differentiation must be considered at the cell-material ***,we have presented a viable strategy for ME-AM community that desires to tune the bulk and surface functionality via blending of(m

关键词： Additive manufacturing Blending surface functionalization surface density Click chemistry Human

Weight regain after intragastric balloon for pre-surgical weight loss

在线全文

学校读者我要写书评

暂无评论

World journal of Gastrointestinal surgery 2024年第7期16卷 2040-2046页

作者： Danielle Abbitt Kevin Choy Alexandra Kovar Teresa s jones Krzysztof j Wikiel Edward l jones Department of surgery University of ColoradoAuroraCO 80045United States Department of surgery Rocky Mountain Regional Veteran Affairs Medical CenterAuroraCO 80045United States

BACKGROUND Over one-third of Americans carry the diagnosis of obesity,many also with obesity-related *** can place patients at increased risk of operative and postoperative *** intragastric balloon has been shown to aid in minor weight loss,however its weight recidivism in patients requiring short interval weight loss has not been well *** To evaluate weight loss,ability to undergo successful elective surgery after intragastric balloon placement,and weight management after balloon *** This study is a retrospective review of patients in a single academic institution undergoing intragastric balloon placement from 2019-2023 to aid in weight loss prior to undergoing elective *** outcomes including weight loss,duration of balloon placement,successful elective surgery,weight regain postballoon and post-procedure complications were *** criteria included those with balloon in place at time of *** Thirty-three patients completed intragastric balloon therapy from 2019-2023 as a bridge to elective *** patients were required to participate in a 12-month weight management program to be eligible for balloon *** surgeries included incisional hernia repair,umbilical hernia repair,inguinal hernia repair,and knee and hip *** average age at placement was 53 years±11 years,majority(91%)were *** average duration of intragastric balloon therapy was 186 days±41 *** average weight loss was 14.0 kg±7.4 kg and with an average percent excess body weight loss of 30.0%(7.9%-73.6%).Over half of the patients(52.0%)achieved the goal of 30-50 lbs(14-22 kg)weight ***-one patients(64%)underwent their intended elective surgery,2 patients(6%)deferred surgery due to symptom relief with weight loss ***-one of the patients(64%)have documented weights in 3 months after balloon removal,in these patients the majority(76%)gained weight after balloon *** pat

关键词： Intragastric balloon Weight loss Obesity Bariatric Body mass index

Reply to the note by li Piani et al.

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第1期31卷 603-606页

作者： T.li Piani j.Weerheijm l.j.sluys TU Delft Stevinweg 12628 CNDelftthe Netherlands TNO PO Box 452280 AARijswijkthe Netherlands NlDA Faculty of Military Sciences1781 CADen Helderthe Netherlands

In 2017,a ballistic phenomenological model was proposed by the authors of Ref.[1] to numerically simulate the experimental depths of small caliber projectiles impacting walls made of *** opportunity for a new model in the field revealed from the observation that two older models recently used by the authors of Ref.[2] shared a linear relationship between the penetration depth P and the impacting velocity v_(O).

关键词： Penetration Adobe Modeling

Generalized polynomial chaos expansion by reanalysis using static condensation based on substructuring

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第5期45卷 819-836页

作者： D.lEE s.CHANG j.lEE Department of Automotive Engineering Hanyang UniversitySeoul 04763Republic of Korea school of Mechanical Engineering Chungnam National UniversityDaejeon 34134Republic of Korea Department of Mechanical Robotics and Energy EngineeringDongguk UniversitySeoul 04620Republic of Korea

This paper presents a new computational method for forward uncertainty quantification(UQ)analyses on large-scale structural systems in the presence of arbitrary and dependent random *** method consists of a generalized polynomial chaos expansion(GPCE)for statistical moment and reliability analyses associated with the stochastic output and a static reanalysis method to generate the input-output data *** the reanalysis,we employ substructuring for a structure to isolate its local regions that vary due to random *** allows for avoiding repeated computations of invariant substructures while generating the input-output data *** substructuring with static condensation further improves the computational efficiency of the reanalysis without losing ***,the GPCE with the static reanalysis method can achieve significant computational saving,thus mitigating the curse of dimensionality to some degree for UQ under high-dimensional *** numerical results obtained from a simple structure indicate that the proposed method for UQ produces accurate solutions more efficiently than the GPCE using full finite element analyses(FEAs).We also demonstrate the efficiency and scalability of the proposed method by executing UQ for a large-scale wing-box structure under ten-dimensional(all-dependent)random inputs.

关键词： forward uncertainty quantification(UQ) generalized polynomial chaos expansion(GPCE) static reanalysis method static condensation substructuring

Biomaterials and emerging technologies for tissue engineering and in vitro models

在线全文

学校读者我要写书评

暂无评论

Bio-Design and Manufacturing 2024年第3期7卷 237-239页

作者： j.Miguel Oliveira Rui l.Reis 3B’s Research Group I3Bs-Research Institute on BiomaterialsBiodegradables and BiomimeticsHeadquarters of the European Institute of Excellence on Tissue Engineering and Regenerative MedicineUniversity of MinhoAveParkZona Industrial da Gandra4805-017 BarcoGuimarãesPortugal ICVs/3B’s-PT Government Associate laboratory 4806-909 Braga/GuimarãesPortugal

The latest advances in the field of biomaterials have opened new avenues for scientific breakthroughs in tissue engineer-ing which greatly contributed for the successful translation of tissue engineering products into the market/***-materials are easily processed to become similar to natural extracellular matrix,making them ideal temporary supports for mimicking the three-dimensional(3D)microenvironment required for maintaining the adequate cell/tissue functions both in vitro and in vivo^([1]).

关键词： breakthrough biomaterials engineer

Corrosion testing of X52 and X80 steels immersed in stimulated emulsions using a real petroleum sample

在线全文

学校读者我要写书评

暂无评论

Petroleum Research 2024年第2期9卷 304-316页

作者： l.M.Quej-Ake j.l.Alamilla A.Contreras Instituto Mexicano del Petróleo Eje Central Lázaro CárdenasNorte 152San Bartolo AtepehuacanGustavo A.MaderoCiudad de MéxicoC.P.07730México

The aim of this study is to evaluate the internal corrosion process on X52 and X80 steels/real petroleum interfaces containing condensed hydrocarbon plus oilfield-produced water,which were subjected to stimulated emulsions using 50/50 vol ratio mixtures at 45℃,different hydrodynamic conditions,1 h,and 24 h.A washing process by using deionized water was proposed to simulate and identify the corrosiveness of the hydrocarbon phase after 24 h of exposure *** characterization by electrochemical impedance spectroscopy and the monitoring of the polarization curves indicated that X80 steel/oilfield-produced water interfaces were more susceptible to corrosion than X52 steel exposed to oilfield-produced *** combined speed rotation of 600 rpm using a magnetic stirrer+600 rpm using a rotating disk electrode decreased the corrosion rate on X52 *** stimulated emulsions made of hydrocarbon+oilfield-produced water and hydrocarbon+deionized water at 24 h increased the corrosion rate on X80 steel(0.34 mm/year and 0.43 mm/year,respectively),promoting the formation of erosion and pitting *** types of corrosion depended mainly on the physicochemical properties of the hydrocarbon,oilfield-produced water,exposure times,and hydrodynamic systems in which the hydrocarbon was studied.

关键词： Corrosion Emulsions X52 steel X80 steel

Comparative analysis of microstructure,mechanical,and corrosion properties of biodegradable Mg-3Y alloy prepared by selective laser melting and spark plasma sintering

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第4期12卷 1496-1510页

作者： P.Minárik M.Zemková s.Šašek j.Dittrich M.Knapek F.lukáˇc D.Koutný j.jaroš R.Král Faculty of Mathematics and Physics Charles UniversityKe Karlovu 5Praha 12116Czech Republic Research Centre University ofŽilinaUniverzitná8215/1Žilina 01026Slovakia Institute of Plasma Physics of the Czech Academy of sciences Za Slovankou 1782/318200 Praha 8Czech Republic Institute of Machine and Industrial Design Brno University of TechnologyTechnická2896/2Brno 61669Czech Republic

This work explored possibilities of biodegradable magnesium alloy Mg-3Y preparation by two modern powder metallurgy techniques–spark plasma sintering(sPs)and selective laser melting(slM).The powder material was consolidated by both methods utilising optimised parameters,which led to very low porosity(∼0.3%)in the slM material and unmeasurably low porosity in the sPs *** main aim of the study was the thorough microstructure characterisation and interrelation between the microstructure and the functional properties,such as mechanical strength,deformability,and corrosion *** materials showed comparable strength of∼110 MPa in tension and compression and relatively good deformability of∼9%and∼21%for the slM and sPs materials,*** corrosion resistance of the sPs material in 0.1 M NaCl solution was superior to the slM one and comparable to the conventional extruded *** digital image correlation during loading and the cross-section analysis of the corrosion layers revealed that the residual porosity and large strained grains have the dominant negative effect on the functional properties of the slM *** the other hand,one of the primary outcomes of this study is that the sPs consolidation method is very effective in the preparation of the W3 biodegradable alloy,resulting in material with convenient mechanical and degradation properties that might find practical applications.

关键词： Magnesium Yttrium Powder metallurgy Microstructure Mechanical strength Corrosion resistance