检索结果-南通市图书馆

In situ characterization of particle formation in spray flame synthesis using wide-angle light scattering

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第3期86卷 304-312页

作者： Simon Aβmann Franz j.t.Huber Stefan Will Lehrstuhl für technische thermodynamik(Ltt) Friedrich-Alexander-Universitat Erlangen-Nürnberg(FAU)Erlangen91058Germany Erlangen Graduate Schoolin Advanced Optical technologies(SAOt) Friedrich-Alexander-Universitat Erlangen-Nurnberg(FAU)Erlangen91052Germany Competence Unit Engineering of Advanced Materials(EAM) Friedrich-Alexander-Universitat Erlangen-Nürnberg(FAU)Erlangen91052Germany

Wide-angle light scattering(WALS)was used for in situ measurements of droplet and nanoparticle size distributions during the synthesis of titania and iron oxide particles from liquid precursor solutions in the standardized SpraySyn burner for spray flame *** was synthesized from titanium tetraisopropoxide(ttIP)and iron oxide from iron(II)nitrate nonahydrate(INN)using ethanol(EtOH)as *** images were taken at heights up to 120 mm above the burner surface and classified into droplet and particle *** size distributions were derived from a sequential analysis of scattering data containing the oscillating Mie pattern,the lognormal size distribution parameters for spherical and fractal particle fractions from a multivariate approach on averaged particle scattering *** results show that the precursor addition leads to altered evaporation behavior and even droplet disruption probably induced by puffing or micro-explosions compared to pure *** the case of ttIP(a hygroscopic alkoxide),the synthesis of a large fraction of spheres was observed,while the nitrate INN leads to the formation of mostly fractal aggregates.

关键词： Spray flame synthesis Metal oxide particles Elastic light scattering Droplet size distribution Nanoparticle morphology Particle size distribution

Reply to the note by Li Piani et al.

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第1期31卷 603-606页

作者： t.Li Piani j.Weerheijm L.j.Sluys tU Delft Stevinweg 12628 CNDelftthe Netherlands tNO PO Box 452280 AARijswijkthe Netherlands NLDA Faculty of Military Sciences1781 CADen Helderthe Netherlands

In 2017,a ballistic phenomenological model was proposed by the authors of Ref.[1] to numerically simulate the experimental depths of small caliber projectiles impacting walls made of *** opportunity for a new model in the field revealed from the observation that two older models recently used by the authors of Ref.[2] shared a linear relationship between the penetration depth P and the impacting velocity v_(O).

关键词： Penetration Adobe Modeling

Mathematical modelling of ball and plate system with experimental and correlation function-based model validation

在线全文

学校读者我要写书评

暂无评论

Control theory and technology 2024年第2期22卷 326-341页

作者： t.R.Dil Kumar S.j.Mija Department of Electrical Engineering National Institute of Technology CalicutKozhikode673601KeralaIndia

the ball and plate system is an inherently nonlinear under actuated benchmark system used for validating the performance of various control schemes. A mathematical model depicting the dynamics close to that of the system is very much required for such a test bed. In this correspondence, the complete nonlinear model, a simplified nonlinear model, and a linearized model of the ball and plate system are developed. the system comprises a ball and plate mechanism and a rotary servo unit. the ball and plate mechanism is modelled using the Euler–Lagrange method, whereas the rotary servo subsystem is modelled from the first principles. the nonlinear model of the combined system is developed by including the dynamics of the servo motor with gear and rolling resistance between the ball and the plate. the simplified nonlinear model of the system is obtained with suitable assumptions. the model is linearized around the operating point using the jacobian. the validity of the developed models is investigated through correlation function analysis. the open-loop response of the three models, viz., nonlinear, simplified nonlinear, and linearized models, is analyzed in the MAtLAB/Simulink platform. Since the open-loop system is unstable, the experimental validation of the model is performed with a double-loop PSO (particle swarm optimization) PID control scheme.

关键词： Ball and plate system Correlation function Model validation Particle swarm optimization(PSO) PSO PID controller

Superplasticity of fine-grained Mg-10Li alloy prepared by severe plastic deformation and understanding its deformation mechanisms

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第1期12卷 316-331页

作者： H.t.jeong S.W.Lee W.j.Kim Department of Materials Science and Engineering Hongik UniversityMapo-guSangsu-dong 72-1Seoul 121-791Republic of Korea

the superplastic behavior and associated deformation mechanisms of a fine-grained Mg-10.1 Li-0.8Al-0.6Zn alloy(LAZ1011)with a grain size of 3.2μm,primarily composed of the BCCβphase and a small amount of the HCPαphase,were examined in a temperature range of 473 K to 623 *** microstructural refinement of this alloy was achieved by employing high-ratio differential speed *** best superplasticity was achieved at 523 K and at strain rates of 10^(-4)-5×10^(-4)s^(-1),where tensile elongations of 550±600%were *** the heating and holding stage of the tensile samples prior to tensile loading,a significant increase in grain size was observed at temperatures above 573 ***,it was important to consider this effect when analyzing and understanding the superplastic deformation behavior and *** the investigated strain rate range,the superplastic flow at low strain rates was governed by lattice diffusion-controlled grain boundary sliding,while at high strain rates,lattice diffusion-controlled dislocation climb creep was the rate-controlling deformation *** was concluded that solute drag creep is unlikely to *** the late stages of deformation at 523 K,it was observed that grain boundary sliding led to the agglomeration of theαphase,resulting in significant strain *** mechanism maps were constructed forβ-Mg-Li alloys in the form of 2D and 3D formats as a function of strain rate,stress,temperature,and grain size,using the constitutive equations for various deformation mechanisms derived based on the data of the current tests.

关键词： Magnesium-lithium alloy Superplasticity Severe plastic deformation Grain size Grain growth

thermoluminescence characterization of natural and synthetic irradiated Ce-monazites

在线全文

学校读者我要写书评

暂无评论

journal of Rare Earths 2024年第4期42卷 643-650页

作者： V.Correcher C.Boronat j.Garcia-Guinea j.F.Benavente t.Rivera-Montalvo CIEMAt Av.Complutense 4028040MadridSpain MNCN-CSIC J.Gutierrez Abascal 228006MadridSpain Instituto Politécnico Nacional CICATA-IPNAv.Legaria 694Mexico City11500Mexico

the thermoluminescence(tL)emission of synthetic and natural Ce-monazites was characterized here to determine the potential application in the identification of microscopic defects from a qualitative point of view trying to link each tL peak to a chemical-physical *** kinetic parameters that lead the luminescence processes were calculated by means of variable heating rate and computing glow curve deconvolution methods and allow identifying three groups of components at~90,130 and 290℃(for the mineral sample)and~90,170,220,270 and 320℃(for the synthetic CePO_(4):Nd_(0.20),La_(0.25)).the main differences appreciated in these complex tL curves are mainly due to(i)the content of impurities(natural sample contains lanthanides as well as U 0.60%and th 5.22%)and(ii)the degree of crystallinity of the samples which is directly related to the type of impurities(synthetic monazite relies only on Nd and La).the behavior of the dose response in the range of 1-8 Gy is similar for both samples;the tL intensity increases linearly as the dose increases without changes in the position of the maxima,denoting first-order kinetic luminescence *** peak could be mostly associated with structural defects(i.e.,phase transitions),chemical reactions(i.e.,Ce3+?Ce4+redox reaction,dehydration or dehydroxylation processes)or intrinsic defects(i.e.,Frenkel defects,ODCs or NBOHCs).

关键词： thermoluminescence Kineticparameters Phosphate Ce-monazite Defects Rare earths

SMILE soft X-ray Imager flight model CCD370 pre-flight device characterisation

在线全文

学校读者我要写书评

暂无评论

Earth and Planetary Physics 2024年第1期8卷 25-38页

作者： S.Parsons D.j.Hall O.Hetherington t.W.Buggey t.Arnold M.W.j.Hubbard A.Holland Centre for Electronic Imaging the Open UniversityMilton KeynesMK76AAUK

throughout the SMILE mission the satellite will be bombarded by radiation which gradually damages the focal plane devices and degrades their *** order to understand the changes of the CCD370s within the soft X-ray Imager,an initial characterisation of the devices has been carried out to give a baseline performance *** CCDs have been characterised,the two flight devices and the flight spa *** has been carried out at the Open University in a bespo ke cleanroom measure ment *** results show that there is a cluster of bright pixels in the flight spa re which increases in size with tempe *** at the nominal ope rating tempe rature(-120℃) it is within the procure ment ***,the devices meet the specifications when ope rating at -120℃ in 6 × 6 binned frame transfer science *** se rial charge transfer inefficiency degrades with temperature in full frame *** any charge losses are recovered when binning/frame transfer is implemented.

关键词： CCD soft X-ray imager characterisation SMILE

Supposition of graphene stacks to estimate the contact resistance and conductivity of nanocomposites

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第4期45卷 663-676页

作者： Y.ZARE M.t.MUNIR G.j.WENG K.Y.RHEE Biomaterials and tissue Engineering Research Group Department of Interdisciplinary TechnologiesBreast Cancer Research CenterMotamed Cancer InstituteTehran ***Iran College of Engineering and technology American University of the Middle EastEgaila 54200Kuwait Department of Mechanical and Aerospace Engineering Rutgers UniversityNew BrunswickNJ 08903U.S.A. Department of Mechanical Engineering(BK21 Four) College of EngineeringKyung Hee UniversityYongin 446701Republic of Korea

In this study,the effects of stacked nanosheets and the surrounding interphase zone on the resistance of the contact region between nanosheets and the tunneling conductivity of samples are evaluated with developed equations superior to those previously *** contact resistance and nanocomposite conductivity are modeled by several influencing factors,including stack properties,interphase depth,tunneling size,and contact *** developed model's accuracy is verified through numerous experimental *** further validate the models and establish correlations between parameters,the effects of all the variables on contact resistance and nanocomposite conductivity are ***,the contact resistance is primarily dependent on the polymer tunnel resistivity,contact area,and tunneling *** dimensions of the graphene nanosheets significantly influence the conductivity,which ranges from 0 S/m to90 S/*** increased number of nanosheets in stacks and a larger gap between them enhance the nanocomposite's ***,the thicker interphase and smaller tunneling size can lead to higher sample conductivity due to their optimistic effects on the percolation threshold and network efficacy.

关键词： graphene polymer composite stacked nanosheet tunneling conductivity contact resistance interphase

the CCD instrument background of the SMILE SXI

在线全文

学校读者我要写书评

暂无评论

Earth and Planetary Physics 2024年第1期8卷 15-24页

作者： M.W.j.Hubbard O.Hetherington D.j.Hall t.W.Buggey S.Parsons t.Arnold A.Holland C.Pagani S.Sembay Centre for Electronic Imaging The Open UniversityMilton KeynesMK76AAUK X-ray and Observational Astronomy Group Department of Physics&AstronomyUniversity of LeicesterLE17RHUK

the ESA and CAS SMILE mission orbit is highly elliptical and will pass through multiple radiation *** Soft X-ray Imager(SXI)instrument aboard has a radiation shutter door designed to close when the surrounding radiation flux is *** shutter door will close when passing below an altitude threshold to protect against trapped particles in the Earth’s Van Allen ***,two radiation environments can be approximated based on the shutter door position:open and *** instrument background for the CCDs(Charge-Coupled Devices)that form the focal plane array of the SXI were evaluated for the two *** to the correlation of the space environment with the solar cycle,the solar minima and maxima,the background was also evaluated at these two *** results demonstrated that the highest instrument background will occur during solar minima due to the main contributing source being Galactic Cosmic Rays(GCRs).It was also found that the open background was highest for solar minima and that the closed background was highest during solar *** is due to the radiation shutter door acting as a scattering centre and the changes in the energy flux distribution of the GCRs between the two solar extremes.

关键词： instrument background X-ray astronomy space radiation

theoretical and experimental investigations on an X-shaped vibration isolator with active controlled variable stiffness

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第8期45卷 1371-1386页

作者： Zeyu CHAI j.t.HAN Xuyuan SONG jian ZANG Yewei ZHANG Zhen ZHANG College of Aerospace Engineering Shenyang Aerospace UniversityShenyang 110136China jacobs School of Engineering University of California San DiegoSan Diego CA 92122U.S.A. Key Laboratory of Vibration and Control of Aero-Propulsion System Ministry of EducationNortheastern UniversityShenyang 110819China

A novel X-shaped variable stiffness vibration isolator(X-VSVI)is *** Runge-Kutta method,harmonic balance method,and wavelet transform spectra are introduced to evaluate the performance of the X-VSVI under various *** layer number,the installation angle of the X-shaped structure,the stiffness,and the active control parameters are systematically *** addition,a prototype of the X-VSVI is manufactured,and vibration tests are carried *** results show that the proposed X-VSVI has a superior adaptability to that of a traditional X-shaped mechanism,and shows excellent vibration isolation performance in response to different amplitudes and forms of ***,the vibration isolation efficiency of the device can be improved by appropriate adjustment of parameters.

关键词： bionic vibration isolation X-shaped structure variable stiffness structure nonlinear dynamics prototype experiment