检索结果-南通市图书馆

Advances in microbiology 2018年第12期8卷 1005-1020页

作者： Kamal E.m.el Kahlout ismail m.el quqa mahmoud W.el Hindi Tarek A.el Bashiti Department of Biology&Biotechnology Islamic UniversityGazaPalestine

Background: milk is a healthy human nutrient, which is fermented to yogurt by lactic acid bacteria, mainly Streptococcus salivarius ssp, thermophilus and Lactobacillus. delbrueckii ssp. bulgaricus. This study aimed to isolate thermophilic starter bacteria from homemade yogurt made in Gaza Strip. The study sought to define both the biochemical and molecular characteristics of the isolated bacteria. Results: Three of the isolates were identified as Streptococcus thermophiles while two isolates were recognized as Lactobacillus delbrueckii ssp. bulgaricus. All five identified isolates showed worthy acidification capacity. Based on these characters, strains were applied for making yogurt either as single pure cultures or as mixed cultures. When using mixed cultures from S. thermophiles and L. bulgaricus, all tested combinations showed positive results. Conclusion: Isolated strains showed remarkable biotechnological characters. The isolates are expected to stimulate and improve quality of the yogurt when they are used as mixed starter cultures.

关键词： Thermophilic Lactic Acid Phonotypic Genotypic Yogurt

Assembly of functional carboxymethyl cellulose/polyethylene oxide/anatase TiO_(2) nanocomposites and tuning the dielectric relaxation, optical, and photoluminescence performances

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Semiconductors 2024年第7期45卷 26-38页

作者： Asmaa m.ismail Abeer A.Reffaee Fawzy G.el Desouky Spectroscopy Department Physics Research InstituteNational Research CentreGizaCairo 12622Egypt microwave Physics and Dielectrics Department National Research CentreDokkiCairoEgypt Solid State Physics Department Physics Research InstituteNational Research CentreGizaCairo 12622Egypt

Nanocomposite films consisting of carboxymethyl cellulose,polyethylene oxide(CmC/PEO),and anatase titanium diox-ide(TO)were produced by the use of sol-gel and solution casting ***2 nanocrystals were effectively incorporated into CmC/PEO polymers,as shown by X-ray diffraction(XRD)and attenuated total reflectance fourier transform infrared(ATR-FTIR)*** roughness growth is at high levels of TO nanocrystals(TO NCs),which means increasing active sites and defects in CmC/*** differential scanning calorimetry(DSC)thermograms,the change in glass transition temperature(Tg)val-ues verifies that the polymer blend interacts with TO *** increment proportions of TO NCs have a notable impact on the dielectric performances of the nanocomposites,as *** electrical properties of the CmC/PEO/TO nanocomposite undergo significant *** nanocomposite films exhibit a red alteration in the absorption edge as the concentration of TO NCs increases in the polymer *** decline in the energy gap is readily apparent as the weight percentage of TO NCs *** photoluminescence(PL)emission spectra indicate that the sites of the luminescence peak maximums show slight variation;peaks get wider,while their intensities decrease dramatically as the concentration of TO *** nanocomposite materials show potential for multifunctional applications including optoelectronics,antireflection coatings,pho-tocatalysis,light emitting diodes,and solid polymer electrolytes.

关键词： anatase TiO_(2) CmC/PEO nanocomposites optical photoluminescent electrical optoelectronics

High resolution sequence stratigraphy of the mishrif Formation(Cenomanian-Early Turonian)at zubair oilfield(al-rafdhiah dome),southern Iraq

在线全文

学校读者我要写书评

暂无评论

Petroleum Research 2024年第1期9卷 61-71页

作者： Aymen A.Lazim maher J.ismail maher m.mahdi Geoscience Department Zubair Field Operation DivisionBasra Oil CompanyIraq Basrah Oil Company WQ1 FODBasrahIraq University of Basrah College of ScienceGeology Dept.BasrahIraq

The mishrif Formation(Cenomanian-E Turonian)is one of the most important geological formations in the middle East and Iraq because it contains enormous petroleum *** is considered to be the first reservoir in the region,and is still being studied because of its economic *** carbonate of the mishrif Formation derives from a variety of depositional settings,including mid-ramp,shoal,lagoon,and *** five main microfacies discussed in this paper are wackestone,packstone,grainstone,floatstone,and *** most frequent fossilised components found in the mishrif Formation are rudists,benthic foraminifera,echinoderms,burrows molluscs,and *** to the microfacies and analysed wireline log data,the sequence stratigraphy of the studied formation is composed of two regression *** parasequences of transgressive-regressive cycles make up the depositional sequence of the mishrif *** standard depositional environments seem to demonstrate a gradual regression,beginning with a short period of the outer ramp,then a steady period of the mid-ramp,and ending in the intertidal ***,the study recorded two regional maximum flooding surfaces:K-135 and *** former is present in the lowermost part of the formation,while the other lies in the *** study shows a close relationship between facies(environments)and hydrocarbon *** increased accumulation focuses on the lower part of the studied formation,and seems to be lower in the upper part of the formation as a result of changes in the environment of deposition.

关键词： mishrif formation Cenomanian Sequence stratigraphy Zubair oilfield Iraq

Inclusion of CoTiO_(3) to ameliorate the re/dehydrogenation properties of the mg–Na–Al system

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of magnesium and Alloys 2024年第3期12卷 1215-1226页

作者： N.A.Ali N.Y.Yusnizam N.A.Sazelee Sami-ullah Rather Haizhen Liu m.ismail Energy Storage Research Group Faculty of Ocean Engineering TechnologyUniversiti Malaysia Terengganu21030 Kuala NerusTerengganuMalaysia Department of Chemical and materials Engineering King Abdulaziz UniversityP.O.Box80204Jeddah 21589Saudi Arabia Guangxi Novel Battery materials Research Center of Engineering Technology School of Physical Science and TechnologyGuangxi UniversityNanning 530004China State Key Laboratory of Featured metal materials and Life-Cycle Safety for Composite Structures Nanning 530004China

For the first time,the mgH_(2)–NaAlH_(4)(ratio 4:1)destabilized system with CoTiO_(3) addition has been *** CoTiO_(3)-doped mgH_(2)–NaAlH_(4) sample begins to dehydrogenate at 130℃,which is declined by 40℃ compared to the undoped mgH_(2)–NaAlH_(4).moreover,the de/rehydrogenation kinetics characteristics of the CoTiO_(3)-doped mgH_(2)–NaAlH_(4) were greatly *** the inclusion of CoTiO_(3),the mgH_(2)–NaAlH_(4) composite absorbed 5.2 wt.%H_(2),higher than undoped mgH_(2)–NaAlH_(4).In the context of dehydrogenation,the CoTiO_(3)-doped mgH_(2)–NaAlH_(4) sample desorbed 2.6 wt.%H_(2),almost doubled compared to the amount of hydrogen desorbed from the undoped mgH_(2)–NaAlH_(4) *** activation energy obtained by the Kissinger analysis for mgH_(2) decomposition was significantly lower by 35.9 kJ/mol than the undoped mgH_(2)–NaAlH_(4) *** reaction mechanism demonstrated that new phases of mgCo and AlTi_(3) were generated in situ during the heating process and are likely to play a substantial catalytic function and be useful in ameliorating the de/rehydrogenation properties of the destabilized mgH_(2)–NaAlH_(4) system with the inclusion of CoTiO_(3).

关键词： Destabilize system magnesium hydride Sodium alanate Hydrogen storage Additive.

Complex Decision modeling Framework with Fairly Operators and Quaternion Numbers under Intuitionistic Fuzzy Rough Context

在线全文

学校读者我要写书评

暂无评论

Computer modeling in Engineering & Sciences 2024年第5期139卷 1893-1932页

作者： Nadeem Salamat muhammad Kamran Shahzaib Ashraf manal elzain mohammed Abdulla Rashad ismail mohammed m.Al-Shamiri Institute of mathematics Khwaja Fareed University of Engineering&Information TechnologyRahim Yar Khan64200Pakistan Department of mathematics Thal University BhakkarPunjab30000Pakistan Department of mathematics Faculty of Science and ArtsKing Khalid UniversityMuhayl Assir61913Saudi Arabia

The main goal of informal computing is to overcome the limitations of hypersensitivity to defects and uncertainty while maintaining a balance between high accuracy,accessibility,and *** paper investigates the potential applications of intuitionistic fuzzy sets(IFS)with rough sets in the context of sparse *** it comes to capture uncertain information emanating fromboth upper and lower approximations,these intuitionistic fuzzy rough numbers(IFRNs)are superior to intuitionistic fuzzy sets and pythagorean fuzzy sets,*** use rough sets in conjunction with IFSs to develop several fairly aggregation operators and analyze their underlying *** present numerous impartial laws that incorporate the idea of proportionate dispersion in order to ensure that the membership and non-membership activities of IFRNs are treated equally within these *** operations lead to the development of the intuitionistic fuzzy rough weighted fairly aggregation operator(IFRWFA)and intuitionistic fuzzy rough ordered weighted fairly aggregation operator(IFRFOWA).These operators successfully adjust to membership and non-membership categories with fairness and *** highlight the unique qualities of these suggested aggregation operators and investigate their use in the multiattribute decision-making *** use the intuitionistic fuzzy rough environment’s architecture to create a novel strategy in situation involving several decision-makers and non-weighted ***,we developed a novel technique by combining the IFSs with quaternion *** establish a unique connection between alternatives and qualities by using intuitionistic fuzzy quaternion numbers(IFQNs).With the help of this framework,we can simulate uncertainty in real-world situations and address a number of decision-making *** the examples we have released,we offer a sophisticated and systematically constructed illustrative scenario that is intricately wo

关键词： Intuitionistic fuzzy set quaternion numbers fuzzy logic decision-making rough set

Design and validation of a handheld capnography device for cardiopulmonary assessment based on the Arduino platform

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Innovative Optical Health Sciences 2021年第6期4卷 42-54页

作者： Om Prakash Singh ismail m.el-Badawy m.B.malarvili Bio-signal Processing Research Group(BSPRG)School of Biosciences and medical Engineering Universiti Teknologi malaysia(UTm) 81310 SkudaiJohorMalaysia electronics and Communication Engineering Department Arab Academy for Science and Technology CairoEgypt School of Electrical Engineering Universiti Teknologi Malaysia(UTM)81310 SkudaiJohorMalaysia Bio-Signal Processing Research Group(BSPRG)School of Biosciences and medical Engineering Universiti Teknologi malaysia(UTm) 81310 SkudaiJohorMalaysia

The design of a handheld capnography device is in great demand because of its effective and practical uses in all cardiac arrest resuscitations,according to the recommendation of the American Heart ***,a handheld capnography device that can be used in clinical settings and the home environment is *** proposed device was developed by using an infrared CO_(2)sensor,Arduino mega2560,and a high-resolution display(2.8").Furthermore,two rechargeable batteries(7.6 V,0.99 A)and a secure digital card with a capacity of 16 GB were incorporated to increase the portability and usability of the *** were implemented to measure standard features,namely,inspired CO_(2)(ICO_(2)),end-tidal CO_(2)(EtCO_(2)),and re-spiratory rate(RR).The features of 15 healthy subjects were recorded by using the developed prototype and the standard capnography device(Capnostream^(Tm)20 model CS08798).Validation was performed with Bland-Altman *** revealed that mean differences±standard deviations for the set limits of ICO_(2),EtCO_(2)and RR were 0.29±1.30 millimeters of mercury(mmHg),0.15±1.77 mmHg and 0.40±0.97 breaths per minute(bpm),*** of the differences among device measurements across all features fell within the 95%limits of ***,the developed device may help manage respiratory distress conditions in and outside of a hospital setting.

关键词： Arduino board capnogram carbon dioxide sensor cardiorespiratory monitoring system

Sequence stratigraphic evaluation for the Abu madi Formation,Abu madi/el Qar'a/Khilala gas fields,onshore Nile Delta,Egypt

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Research 2023年第4期8卷 514-523页

作者： Farouk I.metwalli Amir ismail m.S.metwally Ibrahim m.el Shafei Geology Department Faculty of ScienceHelwan UniversityCairoEgypt Desert Research Center CairoEgypt Petrobel Oil Company CairoEgypt

The present study aims to integrate a large set of geological and geophysical data into a comprehensive model describing the depositional features of the Abu madi/el Qar'a/Khilala gas *** model is based on the sequence stratigraphic framework of the Abu madi Formation defined using cores,well logs,and time-migrated seismic *** trace attribute sections and relative acoustic impedance sections are also used.A possible depositional pattern for the main Level Ill is established,based on the lithological and petrophysical information derived from the seismic data *** Abu madi For-mation can be regarded as a depositional sequence recording the progressive drowning of the incised *** sequence is bounded at the base by an erosional unconformity,created by a drop in the level of the Late messinian Sea,and at the top by a drowning unconformity related to the Early Pliocene *** bottom of Level II divides the Abu madi sequence into two smaller *** both sequences,gas-bearing traps can be found in the Lowstand Systems Tracts,represented by the fluvial Level Ill and fluvial-deltaic Level Il,respectively.

关键词： Abu madi gas field el Qar'a area Khilala area Sequence stratigraphy analysis Onshore Nile Delta Abu madi Formation

Synthesis of newly cationic surfactant based on dimethylaminopropyl amine and their silver nanoparticles:Characterization;surface activity and biological activity

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2017年第2期28卷 264-273页

作者： Samy m.Shaban ismail Aiad mohamed m.el-Sukkary E.A.Soliman moshira Y.el-Awady Petrochemical Department Egyptian Petroleum Research Institute Faculty of Science Ain Shams University

The chemical structure of newly synthesized cationic surfactants based on Schiff base was confirmed using Fourier transform infrared spectroscopy,proton nuclear magnetic resonance spectroscopy,and mass *** synthesized surfactants were used in the synthesis of silver nanoparticles by a simple one-step *** silver nanoparticle（AgNPs） formation was confirmed using transmission electron microscopy（TEm）,electron diffraction（SAED）,dynamic light scattering（DLS）,and energy dispersive X-ray spectroscopy（EDX）.The structure of the surfactant played an important role in the synthesis *** the hydrophobic chain length,the stability,and the amount of surfactant increased the quantity of AgNPs *** surface activity of the synthesized cationic surfactants was determined using surface tension measurements at three different *** synthesized surfactants showed a high tendency toward adsorption and *** the hydrophobic chain length of the synthesized surfactant increased its *** the synthesized cationic surfactants and their nano-form against bacteria and fungi showed that they are highly *** silver nanoparticles enhanced the biological activity of the synthesized cationic surfactants.

关键词： Cationic surfactant Silver nanoparticles Dynamic light scattering Biological activity Surface parameters Thermodynamic parameters

Preparation of capped silver nanoparticles using sunlight and cationic surfactants and their biological activity

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2015年第11期26卷 1415-1420页

作者： Samy m.Shaban ismail Aiad mohamed m.el-Sukkary E.A.Soliman moshira Y.el-Awady Petrochemical Department Egyptian Petroleum Research Institute Faculty of Science Ain Shams University

Silver nanoparticles were prepared in situ using sunlight and cationic surfactants. Silver nano-particles were confirmed using UV-vis spectropbotometry, transmission electron microscopy （TEm）, electron diffraction, dynamic light scattering （DLS） and FTIR. Increasing the hydrophohic chain length of surfactants increase the amount of silver nano-particles formed in addition to increasing their stability. The results showed formed, uniform, well arranged hexagonal and spherical shapes. The prepared silver nanoparticles exhibit enhanced biological activity against Cram-positive, Gram-negative bacteria and sulfate reducing bacteria （SRB）.

关键词： Silver nano-particlesPhotosynthesisSpherical shapesZeta potentialBiological activitySRB

Investigation of contact behavior on a model of the dual-mobility artificial hip joint for Asians in different inner liner thicknesses

在线全文

学校读者我要写书评

暂无评论

World Journal of Orthopedics 2024年第4期15卷 321-336页

作者： Taufiq Hidayat muhammad Imam Ammarullah Rifky ismail Eko Saputra m Danny Pratama Lamura Chethan K N Athanasius Priharyoto Bayuseno J Jamari Department of mechanical Engineering Universitas Muria KudusKudus 59352Central JavaIndonesia Department of mechanical Engineering Universitas DiponegoroSemarang 50275Central JavaIndonesia Undip Biomechanics Engineering&Research Centre Universitas DiponegoroSemarang 50275Central JavaIndonesia Center for Biomechanics Biomaterials Biomechatronics and Biosignal Processing Universitas DiponegoroSemarang 50275Central JavaIndonesia Department of mechanical Engineering Politeknik Negeri SemarangSemarang 50275Central JavaIndonesia Department of Aeronautical and Automobile Engineering Manipal Institute of TechnologyManipalManipal Academy of Higher EducationManipal 576104KarnatakaIndia

BACKGROUND The four components that make up the current dual-mobility artificial hip joint design are the femoral head,the inner liner,the outer liner as a metal cover to prevent wear,and the acetabular *** acetabular cup and the outer liner were constructed of 316L stainless *** the same time,the inner liner was made of ultra-high-molecular-weight polyethylene(UHmWPE).As this new dual-mobility artificial hip joint has not been researched extensively,more tribological research is needed to predict *** thickness of the inner liner is a significant component to consider when calculating the contact *** To make use of finite element analysis to gain a better understanding of the contact behavior in various inner liner thicknesses on a new model of a dual-mobility artificial hip joint,with the ultimate objective of determining the inner liner thickness that was most suitable for this particular type of dual-mobility artificial hip *** In this study,the size of the femoral head was compared between two diameters(28 mm and 36 mm)and eight inner liner thicknesses ranging from 5 mm to 12 *** the finite element method,the contact parameters,including the maximum contact pressure and contact area,have been evaluated in light of the Hertzian contact *** simulation was performed statically with dissipated energy and asymmetric *** types of interaction were surface-to-surface contact and normal contact *** The maximum contact pressures in the inner liner(UHmWPE)at a head diameter of 28 mm and 36 mm are between 3.7-13.5 mPa and 2.7-10.4 mPa,*** maximum von mises of the inner liner,outer liner,and acetabular cup are 2.4–11.4 mPa,15.7–44.3 mPa,and 3.7–12.6 mPa,respectively,for 28 mm *** the maximum von mises stresses of the 36 mm head are 1.9-8.9 mPa for the inner liner,9.9-32.8 mPa for the outer liner,and 2.6-9.9 mPa for the acetabular cup.A head with a diameter of 28 mm should have an inner line

关键词： Contact behavior Contact pressure Finite element analysis Dual-mobility Artificial hip joint