检索结果-南通市图书馆

Sampling duration and freezing temperature influence the analysed gastric inositol phosphate composition of pigs fed diets with different levels of phytase

引用

Animal Nutrition 2019年第2期5卷 196-201页

作者： Steven Laird imke kühn Michael R.Bedford Hayley Whitfield Helen M.Miller Faculty of Biological Sciences University of Leeds AB Vista School of Biological Sciences University of East Anglia

This experiment was conducted to determine the effects of time and freezing temperature during sampling on gastric phytate(myo-inositol [MYO] hexakisphosphate [InsP6]), lower inositol phosphates(InsP2-5) and MYO concentrations in pigs fed diets containing different levels of phytase. Forty pigs were fed 1 of 4 wheat-barley diets on an ad libitum basis for 28 d. The diets comprised a nutritionally adequate positive control(PC), a similar diet but with Ca and P reduced by 1.6 and 1.24 g/kg, respectively(NC), and the NC supplemented with 500(NC + 500) or 2,000(NC + 2000) FTU phytase/kg. At the end of the experiment, chyme were collected from the stomach, thoroughly mixed and 2 subsamples(30 mL) were frozen immediately: one snap-frozen at-79 ℃ and the other at-20 0 C. The remaining chyme were left to sit at room temperature(20 ℃) and further subsamples were collected and frozen as above at 5,10 and15 min from the point of mixing. There were linear reductions in gastric InsP6 concentration over time during sampling(P < 0.001), irrespective of diet or freezing temperature. Moreover, InsP6 concentration was influenced by a diet × freezing temperature interaction(P < 0.05), with less InsP6 measured in chyme frozen at-20 ℃ than at-79 ℃;however,this difference was greater in the control diets than the phytase supplemented diets. Freezing chyme at-79 ℃ recovered more ∑InsP2-5 + MYO than freezing at-20 ℃ in pigs fed phytase supplemented diets;however, this difference was not apparent in the diets without phytase(diet × freezing temperature, P < 0.01), It can be concluded that significant phytate hydrolysis occurs in the gastric chyme of pigs during sampling and processing, irrespective of supplementary phytase activity. Therefore, to minimise post-slaughter phytate degradation and changes in the gastric inositol phosphate profile, chyme should be snap-frozen immediately after collection.

关键词： Pig Inositol phosphate Phytase Sampling time Freezing temperature

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Exploration of chromene-based BioAIEgens

引用

National Science Review 2024年第3期11卷 47-48页

作者： Fritz E.kühn Department of Chemistry&Catalysis Research Center School of Natural Sciences Technical University of Munich

Photoemission efficiency is usually higher in solution than in solid *** compounds however, display a reverse behavior. Such a behavior is called aggregation-induced emission(AIE).

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Strong coupling,charm- and bottom-quark masses from electron-positron annihilation

引用

Chinese Physics C 2010年第6期34卷 675-679页

作者： J.H.kühn Institut für Theoretische Teilchenphysik Karlsruhe Institute of Technology

The cross section for electron-positron annihilation into hadrons allows for a precise determination of the strong coupling constant and the charm- and bottom-quark masses. Recent theoretical and experimental results ... 详细信息

关键词： strong coupling quark masses

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Bio-inspired tetracarbene compounds as a new family of energy saving catalysts

引用

Journal of Energy Chemistry 2023年第4期79卷 559-561页

作者： Bo Zhang Fritz E.kühn CAS key Laboratory of Science and Technology on Applied Catalysis Dalian Institute of Chemical PhysicsChinese Academy of SciencesDalian 116023LiaoningChina' University of Chinese Academy of Science Beijing 100049China Molecular Catalysis Catalysis Research Center and Department of ChemistrySchool of Natural SciencesTechnical University of MunichLichtenbergstr 485748 Garching bei MünchenGermany

Efficient use of energy is a pressing *** of chemical processes is currently an important target for energy *** chemical processes are independent of pathways with respect to the final energy output or consumption,the application of catalysts can reduce involved activation energies considerably and therefore save large amounts of energy.

关键词： Catalysis Iron Carbenes Multidentate ligands

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Organorhenium(Ⅶ) oxides

引用

Rare Metals 2006年第z1期25卷 411-421页

作者： kühn Fritz E. JAIN kavita R. Department für Chemie der Technischen Universitt München Lichtenbergstrasse 4 D-85747 Garching bei München Germany

Methyltrioxorhenium (MTO) and its derivatives were utilized as catalysts for a broad variety of organic reactions after the discovery of an easy synthetic access way to this class of compounds. Among the numerous characterization techniques, 17O-NMR spectroscopy and vibrational spectroscopy were exemplary discussed. The immobilization of MTO and its derivatives is of significant current interest as is the synthesis of chiral derivatives.

关键词： catalysis epoxidation immobilization olefination rhenium

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Linking IL-10 signaling with lipid metabolic programs in macrophages:dysregulated ceramide homeostasis drives colitis

引用

Signal Transduction and Targeted Therapy 2024年第7期9卷 2835-2836页

作者： imke Atreya Markus F.Neurath Department of Medicine 1 University Hospital of ErlangenFriedrich-Alexander University Erlangen-NürnbergErlangenGermany Deutsches Zentrum Immuntherapie(DZI) ErlangenGermany

In a recent study published in Nature,York and coworkers identified the immunometabolic regulation of mono-unsaturated fatty acid(MUFA)pools and the subsequent increase in sphingolipid biosynthesis in TLR2-activated macrophages as an important link between impaired IL-10 signaling and the development of intestinal inflammation.1 Thus,targeted interference with the newly identified IL-10/MUFA/sphingolipid axis appears as a promising strategy to restore immunometabolic homeostasis in the intestine of patients with inflammatory bowel diseases(IBD).

关键词： homeostasis impaired intestine

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Hydromechanical behaviors of andesite under different stress states during fluid injection

引用

Journal of Rock Mechanics and Geotechnical Engineering 2021年第4期13卷 727-744页

作者： Miao He Qi Li Xiaying Li Liang Xu Michael kühn State key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan430071China University of Chinese Academy of Sciences Beijing100049China Fluid Systems Modelling Section GFZ German Research Centre for GeosciencesPotsdamGermany Institute of Earth and Environmental Science University of PotsdamPotsdamGermany

Water reinjection into the formation is an indispensable operation in many energy engineering *** operation involves a complex hydromechanical(HM)coupling process and sometimes even causes unpredictable disasters,such as induced *** is acknowledged that the relative magnitude and direction of the principal stresses significantly influence the HM behaviors of rocks during ***,due to the limitations of current testing techniques,it is still difficult to comprehensively conduct laboratory injection tests under various stress conditions,such as in triaxial extension stress *** this end,a numerical study of HM changes in rocks during injection under different stress states is *** this model,the saturated rock is first loaded to the target stress state under drainage conditions,and then the stress state is maintained and water is injected from the top to simulate the formation injection *** attention is given to the difference in HM changes under triaxial compression and extension *** includes the differences in the pore pressure propagation,mean effective stress,volumetric strain,and stress-induced *** numerical results demonstrate that the differential stress will significantly affect the HM behaviors of rocks,but the degree of influence is different under the two triaxial stress *** HM changes caused by the triaxial compression stress states are generally greater than those of extension,but the differences decrease with increasing differential stress,indicating that the increase in the differential stress will weaken the impact of the stress state on the HM *** addition,the shear failure potential of fracture planes with various inclination angles is analyzed and summarized under different stress *** is recommended that engineers could design suitable injection schemes according to different tectonic stress fields versus fault occurrence to reduce the risk of

关键词： Water reinjection Stress state Hydromechanical(HM)coupling Injection-induced seismicity Numerical modeling

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Laser additive manufactured high-performance Fe-based composites with unique strengthening structure

引用

Journal of Materials Science & Technology 2021年第30期89卷 242-252页

作者： Hongyu Chen Dongdong Gu Liang Deng Tiwen Lu Uta kühn konrad kosiba College of Materials Science and Technology Nanjing University of Aeronautics and AstronauticsNanjing 210016China Jiangsu Provincial Engineering Laboratory for Laser Additive Manufacturing of High-Performance Metallic Components Nanjing University of Aeronautics and AstronauticsNanjing 210016China Leibniz IFW Dresden Institute for Complex MaterialsP.O.Box 270116D-01069 DresdenGermany

Steel matrix composites(SMCs),reinforced by ceramic particles,have received a consistent attention in recent *** conventional methods to prepare SMCs is generally challenging,and the mechanical properties of conventionally fabricated SMCs are *** this study,we successfully fabricated highperformance SMCs by laser powder bed fusion(LPBF)of a composite powder consisting of Fe-based alloy powder and submicron-sized WC *** effect of laser energy density on the phase formation,microstructural evolution,overall density and resulting mechanical properties of LPBF-fabricated composites was *** present results show that a novel Fe_(2)W_(4)C carbidic network precipitates in the solidified microstructure entailing segregations along the boundaries of cellular *** presence of this carbidic network hampers the growth of sub-grains even at elevated temperatures,and hence,stabilizes the grain size though prepared at a broad range of different energy *** exact distribution of the Fe_(2)W_(4)C carbides depends on the employed laser energy densities,as for instance they are more uniformly distributed at higher energy *** density of LPBF samples reaches the maximum value of 99.4%at 150 J/mm^(3).In this parameter set,high microhardness of~753 HV,compression strength of~3350 MPa and fracture strain of~24.4%are *** enhanced mechanical properties are ascribed to less metallurgical defects,higher volume fraction of the martensitic phase and increasing pile-up dislocations resulting from the pinning effect by Fe_(2)W_(4)C carbide.

关键词： Laser additive manufacturing Laser powder bed fusion Steel matrix composite Microstructures Mechanical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Regression analysis of squeezing-induced hybrid nanofluid flow in Darcy-Forchheimer porous medium

引用

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 193-208页

作者： k.MUHAMMAD M.SARFRAZ Department of Humanities and Sciences School of Electrical Engineering and Computer Science National University of Sciences and Technology Department of Mathematics Quaid-i-Azam University

This article presents a mathematical model addressing a scenario involving a hybrid nanofluid flow between two infinite parallel plates. One plate remains stationary, while the other moves downward at a squeezing velocity. The space between these plates contains a Darcy-Forchheimer porous medium. A mixture of water-based fluid with gold(Au) and silicon dioxide(Si O2) nanoparticles is formulated. In contrast to the conventional Fourier's heat flux equation, this study employs the Cattaneo-Christov heat flux equation. A uniform magnetic field is applied perpendicular to the flow direction, invoking magnetohydrodynamic(MHD) effects. Further, the model accounts for Joule heating, which is the heat generated when an electric current passes through the fluid. The problem is solved via NDSolve in MATHEMATICA. Numerical and statistical analyses are conducted to provide insights into the behavior of the nanomaterials between the parallel plates with respect to the flow, energy transport, and skin *** findings of this study have potential applications in enhancing cooling systems and optimizing thermal management strategies. It is observed that the squeezing motion generates additional pressure gradients within the fluid, which enhances the flow rate but reduces the frictional drag. Consequently, the fluid is pushed more vigorously between the plates, increasing the flow velocity. As the fluid experiences higher flow rates due to the increased squeezing effect, it spends less time in the region between the plates. The thermal relaxation, however, abruptly changes the temperature, leading to a decrease in the temperature fluctuations.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Glass-forming ability, phase formation and mechanical properties of glass-forming Cu-Hf-Zr alloys

引用

Progress in Natural Science:Materials International 2019年第5期29卷 576-581页

作者： k.kosiba kaikai Song U.kühn Gang Wang S.Pauly Leibniz IFW Dresden Institute for Complex Materials School of Mechanical Electrical & Information Engineering Shandong University (Weihai) Laboratory for Microstructures Institute of Materials Shanghai University

The influence of Hf additions on the glass-forming ability（GFA）,phase formation and mechanical properties of Cu;Hf;Zr;（x=2,5,10,20 at.%）alloys has been systematically *** report on a distinct correlation between phase formation and GFA of Cu;Zr;-based *** additions of Hf reduce the thermal stability of the high-temperature B2Cu（Hf,Zr）phase,while the thermal stability of the corresponding undercooled melt is *** GFA of these alloy series gradually raises up to 10 at.%Hf,whereas at 20 at.%Hf,the GFA is drastically lowered,since the B2Cu（Hf,Zr）phase becomes unstable and the precipitation of the lowtemperature equilibrium phases is *** interrelation determines the microstructure and results in the formation of Cu-Hf-Zr-based bulk metallic glass *** composites not only show appreciable macroscopic plastic strain,but also high yield strength.

关键词： Metallic glasses Glass-forming ability Composites Continuous cooling transformation (CCT) diagram Mechanical properties

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：