检索结果-南通市图书馆

Organic X-Ray Image Sensors Using a Medium Bandgap Polymer Donor with Low Dark Current

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第6期7卷 230-237页

作者： Jong-Woon Ha Seung Hun Eom Bo Kyung cha Seyeong Song hyeong Ju Eun Jong H.Kim Jong Mok Park BongSoo Kim Byoungwook Park Seo-Jin Ko Sung cheol Yoon changjin Lee In Hwan Jung Do-Hoon Hwang Department of Chemistry Chemistry Institute for Functional MaterialsPusan National UniversityBusan 46241Korea Division of Advanced Energy Materials Research Center Korea Research Institute of Chemical Technology(KRICT)Daejeon 34114Korea Electro-Medical Device Research Center Korea Electrotechnology Research Institute(KERI)Ansan 15588Korea Graduate School of Carbon Neutrality School of Energy and Chemical EngineeringUlsan National Institute of Science and Technology(UNIST)Ulsan 44919Korea Department of Molecular Science and Technology Ajou UniversitySuwon 16449Korea Research Center for Advanced Specialty Chemicals Korea Research Institute of Chemical TechnologyUlsan 44412Korea Department of Chemistry Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Korea Department of Organic and Nano Engineering Human-Tech Convergence ProgramHanyang University222 Wangsimni-roSeongdong-guSeoul 04763Korea

The development of portable X-ray detectors is necessary for diagnosing fractures in unconscious patients in emergency ***,this is quite challenging because of the heavy weight of the scintillator and silicon *** weight and thickness of X-ray detectors can be reduced by replacing the silicon layer with an organic *** study presents a novel bithienopyrroledione-based polymer donor that exhibits excellent photodetection properties even in a thick photoactive layer(~700 nm),owing to the symmetric backbone and highly soluble molecular structure of *** ability of bithienopyrroledione-based polymer donor to strongly suppress the dark current density(Jd~10−10 A cm^(−2))at a negative bias(−2.0 V)while maintaining high responsivity(R=0.29 A W−1)even at a thickness of 700 nm results in a maximum shot-noise-limited specific detectivity of D_(sh)^(*)=2.18×10^(13)Jones in the organic *** organic photodetectors are developed by slot-die coating for use in X-ray detectors,which exhibit D_(sh)^(*)=2.73×10^(12)Jones with clear rising(0.26 s)and falling(0.29 s)response times upon X-ray *** reliability is also proven by linear response of the X-ray detector,and the X-ray detection limit is 3 mA.

关键词： low dark current low detection limit organic photodetector printable X-ray

Validity of fatty liver prediction scores for diagnosis of fatty liver by Fibroscan

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Hepatobiliary & Pancreatic Diseases International 2024年第4期23卷 353-360页

作者： Seogsong Jeong Sun Jae Park Seong Kyun Na Sang Min Park Byung-cheol Song Yun Hwan Oh Department of Biomedical Sciences Seoul National University Graduate SchoolSeoul 03080Korea Department of Biomedical Informatics CHA University School of MedicineCHA UniversitySeongnam 13488Korea Department of Internal Medicine Inje University College of MedicineSeoul 50834Korea Department of Family Medicine Seoul National University HospitalSeoul National University College of MedicineSeoul 03080Korea Department of Internal Medicine Jeju National University HospitalJeju National University College of MedicineJeju 63241Korea Department of Family Medicine Jeju National University HospitalJeju National University College of MedicineJeju 63241Korea Department of Family Medicine Chung-Ang University Gwangmyeong HospitalChung-Ang University College of MedicineGwangmyeong 14353Korea

Background:The Korea National Health and Nutrition Examination Survey nonalcoholic fatty liver disease(K-NAFLD)score was recently developed with the intent to operationally define nonalcoholic fatty liver disease(NAFLD).However,there remained an external validation that confirmed its diagnostic performance,especially in patients with alcohol consumption or hepatitis virus ***:Diagnostic accuracy of the K-NAFLD score was evaluated in a hospital-based cohort consisting of 1388 participants who received Fibroscan®.Multivariate-adjusted logistic regression models and the contrast estimation of receiver operating characteristic curves were used for validation of the K-NAFLD score,fatty liver index(FLI),and hepatic steatosis index(HSI).Results:K-NAFLD-moderate[adjusted odds ratio(aOR)=2.53,95%confidence interval(CI):1.13-5.65]and K-NAFLD-high(aOR=4.14,95%CI:1.69-10.13)groups showed higher risks of fatty liver compared to the K-NAFLD-low group after adjustments for demographic and clinical characteristics,and FLI-moderate and FLI-high groups revealed aORs of 2.05(95%CI:1.22-3.43)and 1.51(95%CI:0.78-2.90),*** addition,the HSI was less predictive for Fibroscan®-defined fatty *** K-NAFLD and FLI also demonstrated high accuracy in the prediction of fatty liver in patients with alcohol consumption and chronic hepatitis virus infection,and the adjusted area under curve values were comparable between K-NAFLD and ***:Externally validation of the K-NAFLD and FLI showed that these scores may be a useful,noninvasive,and non-imaging modality for the identification of fatty *** addition,these scores also predicted fatty liver in patients with alcohol consumption and chronic hepatitis virus infection.

关键词： Nonalcoholic fatty liver disease Fatty liver index Hepatic steatosis index

Effects of homogenization temperature on microstructure and mechanical properties of high-speed-extruded Mg–5Bi–3Al alloy

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2022年第10期10卷 2833-2846页

作者： Jae Won cha Sang-cheol Jin Jae-Gil Jung Sung Hyuk Park School of Materials Science and Engineering Kyungpook National University80 DaehakroDaegu 41566Republic of Korea Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea

This study investigates the effects of billet homogenization temperature on the dynamic recrystallization behavior during high-speed extrusion and resultant microstructure and tensile properties of the Mg–5Bi–3Al(BA53,wt%)*** billets homogenized at 350 and450℃(350H and 450H billets)are extruded at a high speed of 69 m/*** 350H billet has a relatively smaller grain size and a higher abundance of fine Mg3Bi2particles compared to the 450H *** extrusion of the 350H billet,enhanced dynamic recrystallization occurs as a result of its finer grains and abundance of particles,while the growth of recrystallized grains is suppressed by the grain-boundary pinning effect of ***,the extruded 350H material is characterized by smaller grains,relatively greater number of Mg3Bi2particles,and a higher internal strain energy than the extruded 450H *** tensile strength of the extruded 350H material is higher than that of the extruded 450H material owing to stronger grain-boundary hardening,particle hardening,and strain hardening *** extruded 350H material also exhibits a higher tensile elongation as its smaller grains inhibit the formation of crack-inducing undesirable twins during *** results from this study demonstrate that a decrease in the homogenization temperature from 450 to 350℃leads to improved strength and ductility in the high-speed-extruded BA53 material.

关键词： Mg–Bi–Al alloy High-speed extrusion Homogenization Dynamic recrystallization Tensile properties

Comparative study of extrudability, microstructure, and mechanical properties of AZ80 and BA53 alloys

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2023年第1期11卷 249-258页

作者： Sang-cheol Jin Jae Won cha Jongbin Go Jun Ho Bae Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Department of Materials Science and Engineering Kyoto UniversityKyoto 606-8501Japan Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea

The extrudability,microstructural characteristics,and tensile properties of the Mg–5Bi–3Al(BA53)alloy are investigated herein by comparing them with those of a commercial Mg–8Al–0.5 Zn(AZ80)*** AZ80 is extruded at 400℃,severe hot cracking occurs at exit speeds of 4.5 m/min or *** contrast,BA53 is successfully extruded without any surface cracking at 400℃ and at high exit speeds of 21–40 m/*** extruded at 3 m/min(AZ80–3)and 40 m/min(BA53–40),both AZ80 and BA53 exhibited completely recrystallized microstructures with abasal ***,BA53–40 has a coarser grain structure owing to grain growth promoted by the high temperature in the deformation ***80–3 contains a continuous network of Mg_(17)Al_(12) particles along the grain boundaries,which form via static precipitation during natural air-cooling after the material exits the extrusion ***53–40 contains coarse Mg_(3)Bi_(2) particles aligned parallel to the extrusion direction along with numerous uniformly distributed fine Mg_(3)Bi_(2) ***80–3 has higher tensile strength than BA53–40 because the relatively finer grains and larger number of solute atoms in AZ80–3 result in stronger grain-boundary and solid-solution hardening effects,*** BA53 is extruded at a high temperature and extrusion speed of 400℃ and 40 m/min,respectively,the extruded material has a high tensile yield strength of 188 *** can be primarily attributed to the large particle hardening effect resulting from the numerous fine Mg_(3)Bi_(2) particles.

关键词： Mg-Bi-Al alloy Extrusion Hot cracking Second phase Tensile properties

Effects of Al addition on microstructure and mechanical properties of extruded Mg-3Bi alloy

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2022年第7期10卷 1887-1898页

作者： Sang-cheol Jin Jae Won cha Jun Ho Bae Hui Yu Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Implementation Research Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea School of Materials Science and Engineering Hebei University of TechnologyTianjin 300130China

Effects of Al addition to a Mg±Bi binary alloy on its microstructural characteristics and tensile properties after extrusion are investigated via extrusion of Mg-3Bi±x Al(x=0,1,and 2 wt%)billets and analysis of the extruded *** Al addition negligibly affects the second-phase particles of the extruded alloy;however,an increase in the Al content causes significant decreases in the average grain size and maximum texture intensity of the extruded material owing to an increase in the area fraction of dynamically recrystallized(DRXed)*** Al addition improves the strength of the extruded alloy;this improvement is attributed to the enhanced grain-boundary hardening and solid-solution hardening effects induced by grain refinement and Al solute atoms,*** the Al content increases from 0 wt%to 1 wt%and 2 wt%,the tensile elongation increases substantially from 2.8%to 9.4%and 16.9%,*** reduction in the number and size of un DRXed grains with increasing Al content suppresses the formation and coalescence of cracks in the un DRXed grains during tension,which results in a significant improvement in the tensile ductility of the extruded *** tensile deformation,large undesirable twins that act as crack initiation sites are locally formed in the un DRXed grains of the Mg-3Bi alloy,whereas relatively smaller twins are uniformly formed in both the DRXed and the un DRXed grains of the Mg-3Bi-2Al ***,the extruded Mg-3Bi-2Al alloy has a substantially higher tensile yield strength±elongation product(2924 MPa%)than the extruded Al-free B3 alloy(381 MPa%).

关键词： Mg-Bi-Al alloy Extrusion Microstructure Strength Ductility

Size-dependent transition of the deformation behavior of Au nanowires

在线全文

学校读者我要写书评

暂无评论

Nano Research 2015年第3期8卷 941-947页

作者： Na-Young Park Ho-Seok Nam PiI-Ryung cha Seung-cheol Lee School of Advanced Materials Engineering Kookmin University Seou1136-702 R. O. Korea Future Convergence Research Division Korea Institute of Science and Technology (KIST) Seou1136-791 R. O. Korea Indo-Korea Science and Technology Center Korea Institute of Science and Technology (KIST) Seou1136-791 R. O. Korea

Inspired by the controversy over tensile deformation modes of single-crystalline 〈110〉/{111} Au nanowires, we investigated the dependency of the deformation mode on diameters of nanowires using the molecular dynamics technique. A new criterion for assessing the preferred deformation mode-slip or twin propagation--of nanowires as a function of nanowire diameter is presented. The results demonstrate the size-dependent transition, from superplastic deformation mediated by twin propagation to the rupture by localized slips in deformed region as the nanowire diameter decreases. Moreover, the criterion was successfully applied to explain the superplastic deformation of Cu nanowires.

关键词： Au nanowire molecular dynamics size-dependent transition tensile deformationmechanism

Improvement in tensile strength of extruded Mg-5Bi alloy through addition of Sn and its underlying strengthening mechanisms

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2022年第11期10卷 3100-3112页

作者： Sang-cheol Jin Jae Won cha Jeong Hun Lee Taekyung Lee Sang-Ho Han Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Ulsan Regional Division Korea Institute of Industrial TechnologyUlsan 44413Republic of Korea School of Mechanical Engineering Pusan National UniversityBusan 46241Republic of Korea Department of Materials Analysis Korea Institute of Materials ScienceChangwon 51508Republic of Korea

Through an investigation of the microstructure and mechanical properties of extruded Mg–5Bi–x Sn(BT5x, x = 0, 2, 4, and 6 wt%) alloys,this study demonstrates that the addition of Sn to an Mg–5Bi binary alloy significantly improves the tensile strength of the extruded *** the extruded alloys exhibit a typical basal fiber texture and a partially dynamically recrystallized(DRXed) microstructure consisting of fine DRXed grains and coarse un DRXed grains. As the Sn content increases from 0 wt% to 6 wt%, the average size of the DRXed grains decreases from 4.2 to 2.8 μm owing to the increase in the amount of precipitates via their grain-boundary pinning effect. The extruded B5 and BT52 alloys contain numerous Mg_(3)Bi_(2) precipitates, but their size and number density are smaller and higher, respectively, in the latter *** Mg_(2)Sn precipitates as well as Mg_(3)Bi_(2)precipitates are present in the extruded BT54 and BT56 alloys, and the number density of the Mg_(2)Sn precipitates is higher in the latter alloy because of its higher Sn content. The addition of 2 wt% Sn to the B5 alloy significantly improves the yield strength(YS) and ultimate tensile strength(UTS) of the extruded alloy—by 76 and 57 MPa, respectively. This drastic improvement is the combined outcome of enhanced grain-boundary hardening, precipitation hardening, and solid-solution hardening effects induced by the refined DRXed grains, numerous precipitates, and Sn solute atoms, respectively. The further addition of 2 wt% or 4 wt% Sn to the BT52 alloy leads to moderate increments in the YS and UTS of the extruded alloy. Specifically, each addition of 2 wt% Sn increases the YS and UTS by ~26 and ~20 MPa, respectively, which is attributed mainly to the additional precipitation hardening effect induced by the Mg_(2)Sn precipitates.

关键词： Mg-Bi-Sn alloy Extrusion Precipitation Microstructure Tensile property

Overexpression of Arabidopsis YUCCA6 in Potato Results in High-Auxin Developmental Phenotypes and Enhanced Resistance to Water Deficit

在线全文

学校读者我要写书评

暂无评论

Molecular Plant 2013年第2期6卷 337-349页

作者： Jeong Im Kim Dongwon Baek hyeong cheol Park Hyun Jin Chun Dong-Ha Oh Min Kyung Lee Joon-Yung cha Woe-Yeon Kim Min Chul Kim Woo Sik Chung Hans J. Bohner Sang Yeol Lee Ray A. Bressan Shin-Woo Lee Dae-Jin Yun Department of Biochemistry Purdue University West Lafayette IN 47907 USA Division of Applied Life Science (BK21 and WCU Program) Plant Molecular Biology and Biotechnology Research Center Gyeongsang National UniversityJinju 660-701 Republic of Korea Department of Plant Biology University of Illinois at Urbana-Champaign Urbana IL USA Department of Agronomy and Medicinal Plant Resources Gyeongnam National University of Science and Technology Jinju 660-758 Korea Faculty of Science King Abdulaziz University Jeddah 21589 KSA Department of Horticulture Purdue University West Lafayette IN 47907 USA

Indole-3-acetic acid （IAA）, a major plant auxin, is produced in both tryptophan-dependent and tryptophan-independent pathways. A major pathway in Arabidopsis thaliana generates IAA in two reactions from tryptophan. Step one converts tryptophan to indole-3-pyruvic acid （IPA） by tryptophan aminotransferases followed by a rate-limiting step converting IPA to IAA catalyzed by YUCCA proteins. We identified eight putative StYUC （Solanum tuberosum YUCCA） genes whose deduced amino acid sequences share 50%-70% identity with those of Arabidopsis YUCCA proteins. All include canonical, conserved YUCCA sequences： FATGY motif, FMO signature sequence, and FAD-binding and NADP-binding sequences. In addition, five genes were found with -50% amino acid sequence identity to Arabidopsis trypto-phan aminotransferases. Transgenic potato （Solanum tuberosum cv. Jowon） constitutively overexpressing Arabidopsis AtYUC6 displayed high-auxin phenotypes such as narrow downward-curled leaves, increased height, erect stature, and longevity. Transgenic potato plants overexpressing AtYUC6 showed enhanced drought tolerance based on reduced water loss. The phenotype was correlated with reduced levels of reactive oxygen species in leaves. The results suggest a func-tional YUCCA pathway of auxin biosynthesis in potato that may be exploited to alter plant responses to the environment.

关键词： Solanum tuberosum potato Arabidopsis thaliana yuc6-1D YUCCA, StYUCCA, StTAA, auxin, drought.

Computational design of Mg alloys with minimal galvanic corrosion

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2022年第7期10卷 1972-1980页

作者： Krishnamohan Thekkepat Hyung-Seop Han Ji-Won Choi Seung-cheol Lee Eul Sik Yoon Guangzhe Li Hyun-Kwang Seok Yu-chan Kim Jae-Hun Kim Pil-Ryung cha Indo-Korea Science and Technology Center JakkurBangalore 560065India Division of Nano&Information Technology KIST SchoolKorea University of Science and TechnologySeoul 02792Republic of Korea Electronic Materials Research Center Korea Institute of Science and TechnologySeoul 02792Republic of Korea Center for Biomaterials Biomedical Research InstituteKorea Institute of Science and TechnologySeoul 02792Republic of Korea Department of Plastic and Reconstructive Surgery Korea University College of MedicineSeoul 02841Republic of Korea Division of Bio-Medical Science and Technology KIST SchoolKorea University of Science and TechnologySeoul 02792Republic of Korea School of Advanced Materials Engineering Kookmin UniversitySeoul 02707Republic of Korea

Formation of galvanic cells between constituent phases is largely responsible for corrosion in Mg-based *** develop a methodology to calculate the electrochemical potentials of intermetallic compounds and alloys using a simple model based on the Born-Haber *** electrochemical potentials are used to predict and control the formation of galvanic cells and minimize *** demonstrate the applicability of our model by minimizing galvanic corrosion in Mg-3wt%Sr-x Zn alloy by tailoring the Zn *** methodology proposed in this work is applicable for any general alloy system and will facilitate efficient design of corrosion resistant alloys.

关键词： Galvanic corrosion First-principles Cluster expansion Thermodynamics Modeling Magnesium alloys