检索结果-南通市图书馆

Bulging Distortion of Austenitic Stainless Steel Sheet on the Partially Penetrated Side of Non-Penetration Lap Laser Welding Joint

引用

Chinese Journal of Mechanical Engineering 2024年第1期37卷 286-295页

作者： Chengwu yao Enze Liu Jiaming Ni Binying Nie Shanghai Key Laboratory of Materials Laser Processing and Modification School of Material Science and EngineeringShanghai Jiao Tong UniversityShanghai 200240China Shanghai Aerospace Precision Machinery Institute Shanghai 201600China Chemical and Biological Engineering College Yichun UniversityYichun 336000China

Non-penetration laser welding of lap joints in austenitic stainless steel sheets is commonly preferred in fields where the surface quality is of utmost ***,the application of non-penetration welded austenitic stainless steel parts is limited owing to the micro bulging distortion that occurs on the back surface of the partial penetration *** this paper,non-penetration lap laser welding experiments,were conducted on galvanized and SUS304 austenitic stainless steel plates using a fiber laser,to investigate the mechanism of bulging distortion.A comparative experiment of DC01 galvanized steel-Q235 carbon steel lap laser welding was carried out,and the deflection and distortion profile of partially penetrated side of the sheets were measured using a noncontact laser *** addition,the cold-rolled SUS304 was subjected to heat holding at different temperatures and water quenching after bending to characterize its microstructure under tensile and compressive *** results show that,during the heating stage of the thermal cycle of laser lap welding,the partial penetration side of the SUS304 steel sheet generates compressive stress,which extrudes the material in the heat-affected zone to the outside of the back of the SUS304 steel sheet,thereby forming a *** findings of these experiments can be of great value for controlling the distortion of the partial penetrated side of austenitic stainless steel sheet during laser non-penetration lap welding.

关键词： Non-penetration lap laser welding Bulging distortion Austenitic stainless steel Compressive stress Tension stress

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Energy transfer, anticounterfeiting, white light emission and sensing in fine-regulating series of lanthanide metal-organic frameworks

引用

Journal of Rare Earths 2024年第3期42卷 446-454,I0001页

作者： Juanjuan Xue yao Wang Guoping Yang yaoyu Wang Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of the Ministry of Education Shaanxi Key Laboratory of Physico-Inorganic ChemistryCollege of Chemistry&Materials ScienceNorthwest UniversityXi'an710127China

Three lanthanide ions and a rigid(1,1'-biphenyl)-2,4,6-tricarboxylic acid(H_(3)bptc) ligand led to the isostructural lanthanide metal-organic frameworks(Ln-MOFs) {[Ln(bptc)(H_(2)O)_(3)]·3H_(2)O}_n(Lnbptc, Ln = Eu,Tb, Gd, Eu_(x)Tb_(1—x), Eu_(x)Gd_(1-x), Tb_(x)Gd_(1-x), and Eu_(0.12)Tb_(0.52)Gd_(0.36)). The density functional theory(DFT) and time-dependent DFT calculation were expanded on H_3bptc, which point to the occurrence of “antenna effect”. The minor diameter samples of Eubptc, Tbbptc, and Gdbptc can also be attained via the microwave synthesis and employed for handwriting anticounterfeiting. Interestingly, the typical red emission of Eu^(3+) and green emission of Tb~(3+) could be fine-tuned by Gd^(3+) via chemical mixing to be full-color emissions bimetallic doped Eu_(x)Tb_(1-x)bptc, Eu_(x)Gd_(1-x)bptc, and Tb_(x)Gd_(1-x)bptc. The above synthetic bimetallic MOFs can be fixed in positioning boxes of quick response(QR) codes with diverse emission for anticounterfeiting. The message can be decoded under the irradiation of 365 nm ultraviolet lamp while invisible in the daylight. Notably, the trimetallic doped Eu_(0.12)Tb_(0.52)Gd_(0.36)bptc emits white light with the CIE color coordinate(0.34, 0.34). Furthermore, Tbbptc is demonstrated to be a sensitive probe toward nitrobenzene and acetone with multiple mechanisms.

关键词： Metal-organic frameworks Anticounterfeiting White light-emitting Sensing Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research on concrete structure defect repair based on three-dimensional printing

引用

Frontiers of Structural and Civil Engineering 2024年第5期18卷 731-742页

作者： Yang GU Wei LI Xupeng yao Guangjun LIU School of Mechanical Engineering Tongji UniversityShanghai 201804China College of Civil Engineering Tongji UniversityShanghai 200092China Shanghai Engineering Research Center for Safety Intelligent Control of Building Machinery Shanghai 200032China

Quality assurance and maintenance play a crucial role in engineering construction,as they have a significant impact on project *** common issue in concrete structures is the presence of *** enhance the automation level of concrete defect repairs,this study proposes a computer vision-based robotic system,which is based on three-dimensional(3D)printing technology to repair *** system integrates multiple sensors such as light detection and ranging(LiDAR)and *** is utilized to model concrete pipelines and obtain geometric parameters regarding their ***,a convolutional neural network(CNN)is employed with a depth camera to locate defects in concrete ***,a method for coordinate transformation is presented to convert the obtained coordinates into executable ones for a robotic ***,the feasibility of this concrete defect repair method is validated through simulation and experiments.

关键词： concrete defect detection 3D printing deep learning point cloud data

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Promising thermal photonic management materials for sustainable human habitat

引用

Nano Research 2024年第1期17卷 112-131页

作者： houze yao Qihua Liao Huhu Cheng Liangti Qu Key Laboratory of Organic Optoelectronics&Molecular Engineering Ministry of EducationDepartment of ChemistryLaboratory of Flexible Electronics TechnologyTsinghua UniversityBeijing 100084China State Key Laboratory of Tribology in Advanced Equipment(SKLT) Department of Mechanical EngineeringTsinghua UniversityBeijing 100084China

The spectral characteristics of outdoor structures,such as automobiles,buildings,and clothing,determine their energy interaction with the environment,from broad-spectrum absorption of light energy to high-efficiency thermal *** developed spectrally selective absorption(SSA)materials permit the reduction of energy loss from human habitat eco-system in the sustainable way and further reduce the utilization of fossil energy to achieve carbon *** we review recent advances in SSA materials that enable rational and efficient management of thermal energy and provide new solutions for the resource base that supports human life like comfortable heat management,electricity production,and water *** basic principles of thermal photonic management,the regulation of SSA materials,and functional properties are *** outlook discussing challenges and opportunities in SSA material energy management for comfortable living environments is finally presented,which expects the enormous potential of this interdisciplinary research in solving growing resource-shortage of human society.

关键词： spectrally selective absorption passive cooling solar power eco-system

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Event-Triggered Bipartite Consensus Tracking and Vibration Control of Flexible Timoshenko Manipulators Under Time-Varying Actuator Faults

引用

IEEE/CAA Journal of Automatica Sinica 2024年第5期11卷 1190-1201页

作者： Xiangqian yao Hao Sun Zhijia Zhao Yu Liu School of Automation Science and Engineering South China University of TechnologyGuangzhou 510640China Yongjiang Laboratory Ningbo 315202 School of Astronautics Harbin Institute of TechnologyHarbin 150001China School of Mechanical and Electrical Engineering Guangzhou UniversityGuangzhou 510006China

For bipartite angle consensus tracking and vibration suppression of multiple Timoshenko manipulator systems with time-varying actuator faults,parameter and modeling uncertainties,and unknown disturbances,a novel distributed boundary event-triggered control strategy is proposed in this *** contrast to the earlier findings,time-varying consensus tracking and actuator defects are taken into account *** addition,the constructed event-triggered control mechanism can achieve a more flexible design because it is not required to satisfy the input-to-state *** achieve the control objectives,some new integral control variables are given by using back-stepping technique and boundary ***,adaptive neural networks are applied to estimate system *** the proposed event-triggered scheme,control inputs can reduce unnecessary ***,tracking errors and vibration states of the closed-looped network can be exponentially convergent into some small fields,and Zeno behaviors can be *** last,some simulation examples are given to state the effectiveness of the control algorithms.

关键词： Vibration satisfy bipartite

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Aircraft parameter estimation using a stacked long short-term memory network and Levenberg-Marquardt method

引用

Chinese Journal of Aeronautics 2024年第2期37卷 123-136页

作者： Zhe HUI Yinan KONG Weigang yao Gang CHEN School of Aerospace Science and Technology Xidian UniversityXi’an 710071China Computation Aerodynamics Institution China Aerodynamics Research and Development CenterMianyang 621000China Faculty of Computing Engineering and MediaDe Montfort UniversityLeicester LE19BHUnited Kingdom School of Aerospace Engineering Xi’an Jiaotong UniversityXi’an 710049China

To effectively estimate the unknown aerodynamic parameters from the aircraft’s flight data,this paper proposes a novel aerodynamic parameter estimation method incorporating a stacked Long Short-Term Memory(LSTM)network model and the Levenberg-Marquardt(LM)*** stacked LSTM network model was designed to realize the aircraft dynamics modeling by utilizing a frame of nonlinear functional mapping based entirely on the measured input-output data of the aircraft system without requiring explicit postulation of the *** LM method combines the already-trained LSTM network model to optimize the unknown aerodynamic *** proposed method is applied by using the real flight data,generated by ATTAS aircraft and a bio-inspired morphing Unmanned Aerial Vehicle(UAV).The investigation reveals that for the two different flight data,the designed stacked LSTM network structure can maintain the efficacy of the network prediction capability only by appropriately adjusting the dropout rates of its hidden layers without changing other network parameters(i.e.,the initial weights,initial biases,number of hidden cells,time-steps,learning rate,and number of training iterations).Besides,the proposed method’s effectiveness and potential are demonstrated by comparing the estimated results of the ATTAS aircraft or the bio-inspired morphing UAV with the corresponding reference values or wind-tunnel results.

关键词： Parameter estimation LSTM network model LM method Aerodynamic parameters Flight data Aircraft dynamics modeling Network prediction capability Network parameters

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Selection Method for New Energy Output Guaranteed Rates Considering Optimal Energy Storage Configuration

引用

CSEE Journal of Power and Energy Systems 2024年第2期10卷 539-547页

作者： Xin Cheng Tong Wu Wei yao Yan Yang Guangdong Power Grid Corporation Guangzhou 510620China State Key Laboratory of Advanced Electromagnetic Engineering and Technology and School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China

The output of new energy represented by wind power and photovoltaic power features volatility and randomness. It is a practical approach to use the guaranteed rate with statistical characteristics to analyze the output coefficient of new energy. however, there is a lack of analysis and demonstration on the value of the new energy output guaranteed rate. To solve this problem, a selection method for the new energy output guaranteed rate considering optimal energy storage configuration is proposed. First, the influence of the new energy output guaranteed rate on the new energy output coefficient is analyzed. Secondly, with the goal of minimizing the comprehensive costs, an optimal configuration model of energy storage based on the output guaranteed rate of new energy is constructed, and particle swarm optimization is used for the optimization solution. Then, according to the optimal energy storage configuration results under different guaranteed rates, a reasonable new energy output guaranteed rate is determined by maximizing the comprehensive benefits obtained from energy storage. Finally, an example applied to the power grid in an area of Guangdong in Southern China is provided to illustrate the effectiveness of the proposed method.

关键词： Energystorage optimization guaranteed output guaranteed rate new energy consumption

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Multi-Objective Optimization Based on Life Cycle Assessment for Hybrid Solar and Biomass Combined Cooling,Heating and Power System

引用

Journal of Thermal Science 2024年第3期33卷 931-950页

作者： LIU Jiejie LI yao MENG Xianyang WU Jiangtao Key Laboratory of Thermo-Fluid Science and Engineering Ministry of EducationXi’an Jiaotong UniversityXi’an710049China

The complementary of biomass and solar energy in combined cooling,heating and power(CCHP)system provides an efficient solution to address the energy crisis and environmental *** work aims to propose a multi-objective optimization model based on the life cycle assessment(LCA)method for the optimal design of hybrid solar and biomass *** life-cycle process of the poly-generation system is divided into six phases to analyze energy consumption and greenhouse gas *** comprehensive performances of the hybrid system are optimized by incorporating the evaluation criteria,including environmental impact in the whole life cycle,renewable energy contribution and economic *** non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ)with the technique for order preference by similarity to ideal solution(TOPSIS)method is employed to search the Pareto frontier result and thereby achieve optimal *** developed optimization methodology is used for a case study in an industrial *** results indicate that the best performance from the optimized hybrid system is reached with the environmental impact load reduction rate(EILRR)of 46.03%,renewable energy contribution proportion(RECP)of 92.73%and annual total cost saving rate(ATCSR)of35.75%,*** comparing pollutant-eq emissions of different stages,the operation phase emits the largest pollutant followed by the phase of raw material ***,this study reveals that the proposed multi-objective optimization model integrated with LCA method delivers an alternative path for the design and optimization of more sustainable CCHP system.

关键词： combined cooling heating and power system solar-biomass multi-objective optimization life cycle assessment optimal design

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Modified Iterative Learning Control Approach for the Active Suppression of Rotor Vibration Induced by Coupled Unbalance and Misalignment

引用

Chinese Journal of Mechanical Engineering 2024年第1期37卷 242-253页

作者： Yifan Bao Jianfei yao Fabrizio Scarpa Yan Li College of Mechanical and Electrical Engineering Beijing University of Chemical TechnologyBeijing 100029China State Key Laboratory of High-end Compressor and System Technology Beijing 100029China Beijing Key Laboratory of High-end Mechanical Equipment Health Monitoring and Self-Recovery Beijing University of Chemical TechnologyBeijing 100029China Key Lab of Engine Health Monitoring-Control and Networking of Ministry of Education Beijing University of Chemical TechnologyBeijing 100029China Bristol Composites Institute(ACCIS) University of BristolBristol BS81TRUK Dynamics and Control Research Group(DCRG) University of BristolBristol BS81TRUK

This paper proposes a modified iterative learning control(MILC)periodical feedback-feedforward algorithm to reduce the vibration of a rotor caused by coupled unbalance and parallel *** control of the vibration of the rotor is provided by an active magnetic actuator(AMA).The iterative gain of the MILC algorithm here presented has a self-adjustment based on the magnitude of the *** filters are adopted to extract the synchronous(1×Ω)and twice rotational frequency(2×Ω)components of the rotor *** the notch frequency of the filter and the size of feedforward storage used during the experiment have a real-time adaptation to the rotational *** method proposed in this work can provide effective suppression of the vibration of the rotor in case of sudden changes or fluctuations of the rotor *** and experiments using the MILC algorithm proposed here are carried out and give evidence to the feasibility and robustness of the technique proposed.

关键词： Rotor vibration suppression Modified iterative learning control Unbalance Parallel misalignment Active magnetic actuator

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The next decade of SET:from an oncoprotein to beyond

引用

Journal of Molecular Cell Biology 2024年第1期16卷 1-14页

作者： Han yao Meng Zhang Donglai Wang State Key Laboratory of Common Mechanism Research for Major Diseases&Department of Medical Genetics Institute of Basic Medical Sciences&School of Basic MedicineChinese Academy of Medical Sciences&Peking Union Medical CollegeBeijing 100005China

This year marks the fourth decade of research into the protein SET,which was discovered in *** was initially identified as an oncoprotein but later shown to be a multifaceted protein involved in regulating numerous biological processes under both physiological and pathophysiological *** dysfunction is closely associated with diseases,such as cancer and Alzheimer's *** the increasing understanding of how SET works and how it is regulated in cells,targeting aberrant SET has emerged as a potential strategy for disease *** this review,we present a comprehensive overview of the advancements in SET studies,encompassing its biological functions,regulatory networks,clinical implications,and pharmacological ***,we provide insights into the future prospects of SET research,with a particular emphasis on its promising potential in the realm of immune modulation.

关键词： SET biological process regulatory mechanism disease therapy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：