检索结果-南通市图书馆

Chinese Physics B 2018年第8期27卷 7-12页

作者： Meng-Li Liu Yu-Yi OuYang huan-ran hou Ming Lei Wen-Jun Liu Zhi-Yi Wei State Key Laboratory of Information Photonics and Optical Communications School of ScienceBeijing University of Posts and TelecommunicationsBeijing 100876China Beijing National Laboratory for Condensed Matter Physics Institute of PhysicsChinese Academy of SciencesBeijing 100190China

Due to the remarkable carrier mobility and nonlinear characteristic, MoS2 is considered to be a powerful competitor as an effective optical modulated material in fiber lasers. In this paper, the MoS2 films are prepared by the chemical vapor deposition method to guarantee the high quality of the crystal lattice and uniform thickness. The transfer of the films to microfiber and the operation of gold plated films ensure there is no heat-resistant damage and anti-oxidation. The modulation depth of the prepared integrated microfiber-MoS2 saturable absorber is 11.07%. When the microfiber-MoS2 saturable absorber is used as a light modulator in the Q-switching fiber laser, the stable pulse train with a pulse duration of 888 ns at 1530.9 nm is obtained. The ultimate output power and pulse energy of output pulses are 18.8 mW and 88 nJ, respectively. The signal-to-noise ratio up to 60 dB indicates the good stability of the laser. This work demonstrates that the MoS2 saturable absorber prepared by the chemical vapor deposition method can serve as an effective nonlinear control device for the Q-switching fiber laser.

关键词： nonlinear optical materials fiber laser Q-switching

Multi-layer multi-pass friction rolling additive manufacturing of Al alloy:Toward complex large-scale high-performance components

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 425-438页

作者： Haibin Liu Run hou Chenghao Wu Ruishan Xie Shujun Chen College of Mechanical&Energy Engineering Beijing University of TechnologyBeijing 100124China Chongqing Research Institute of Beijing University of Technology Chongqing 401121China

At present,the emerging solid-phase friction-based additive manufacturing technology,including friction rolling additive man-ufacturing(FRAM),can only manufacture simple single-pass *** this study,multi-layer multi-pass FRAM-deposited alumin-um alloy samples were successfully prepared using a non-shoulder tool *** material flow behavior and microstructure of the over-lapped zone between adjacent layers and passes during multi-layer multi-pass FRAM deposition were studied using the hybrid 6061 and 5052 aluminum *** results showed that a mechanical interlocking structure was formed between the adjacent layers and the adja-cent passes in the overlapped center *** friction and rolling of the tool head led to different degrees of lateral flow and plastic deformation of the materials in the overlapped zone,which made the recrystallization degree in the left and right edge zones of the over-lapped zone the highest,followed by the overlapped center zone and the non-overlapped *** tensile strength of the overlapped zone exceeded 90%of that of the single-pass deposition *** is proved that although there are uneven grooves on the surface of the over-lapping area during multi-layer and multi-pass deposition,they can be filled by the flow of materials during the deposition of the next lay-er,thus ensuring the dense microstructure and excellent mechanical properties of the overlapping *** multi-layer multi-pass FRAM deposition overcomes the limitation of deposition width and lays the foundation for the future deposition of large-scale high-performance components.

关键词： aluminum alloy additive manufacturing solid-state friction stir welding multi-layer multi-pass

Multi-model ensemble learning for battery state-of-health estimation:Recent advances and perspectives

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 739-759页

作者： Chuanping Lin Jun Xu Delong Jiang Jiayang hou Ying Liang Zhongyue Zou Xuesong Mei State Key Laboratory for Manufacturing Systems Engineering Xi'an Jiaotong University Shaanxi Key Laboratory of Intelligent Robots School of Mechanical Engineering Xi'an Jiaotong University Department of Electrical Engineering and Automation Luoyang Institute of Science and Technology School of Mechanical Engineering Hangzhou Dianzi University

The burgeoning market for lithium-ion batteries has stimulated a growing need for more reliable battery performance monitoring. Accurate state-of-health(SOH) estimation is critical for ensuring battery operational performance. Despite numerous data-driven methods reported in existing research for battery SOH estimation, these methods often exhibit inconsistent performance across different application scenarios. To address this issue and overcome the performance limitations of individual data-driven models,integrating multiple models for SOH estimation has received considerable attention. Ensemble learning(EL) typically leverages the strengths of multiple base models to achieve more robust and accurate outputs. However, the lack of a clear review of current research hinders the further development of ensemble methods in SOH estimation. Therefore, this paper comprehensively reviews multi-model ensemble learning methods for battery SOH estimation. First, existing ensemble methods are systematically categorized into 6 classes based on their combination strategies. Different realizations and underlying connections are meticulously analyzed for each category of EL methods, highlighting distinctions, innovations, and typical applications. Subsequently, these ensemble methods are comprehensively compared in terms of base models, combination strategies, and publication trends. Evaluations across 6 dimensions underscore the outstanding performance of stacking-based ensemble methods. Following this, these ensemble methods are further inspected from the perspectives of weighted ensemble and diversity, aiming to inspire potential approaches for enhancing ensemble performance. Moreover, addressing challenges such as base model selection, measuring model robustness and uncertainty, and interpretability of ensemble models in practical applications is emphasized. Finally, future research prospects are outlined, specifically noting that deep learning ensemble is poised to advance ens

关键词： Lithium-ion battery State-of-health estimation Data-driven Machine learning Ensemble learning Ensemble diversity

Practical approach for detecting k-nonseparability of multipartite quantum states

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2025年第1期Mechanics & Astronomy) .卷 32-48页

作者： Jie Guo Jinchuan hou Xiaofei Qi Kan He College of Mathematics Taiyuan University of Technology School of Mathematics and Statistics Shanxi University Key Laboratory of Complex Systems and Data Science of Ministry of Education Shanxi University

The instantaneous detection of entanglement in quantum states poses a significant challenge in the fields of quantum computation and quantum information, and there are no practical methods or tools to complete this task satisfactorily so far. We propose a sufficient and necessary criterion of k-nonseparability for any n-partite finite or infinite dimensional systems, 2 ≤ k ≤ n. This criterion serves as the foundation for a practical scheme designed to detect entanglement and k-nonseparability across multipartite finite-dimensional systems. To exemplify the application of our scheme, we have developed a software tool that facilitates swift and precise identification of entanglement, k-nonseparability, and genuine entanglement within n-qubit systems, specifically tailored for systems with 2 ≤ n ≤ 4.

关键词： multipartite systems entanglement states entanglement witnesses ${\bm~k}$-nonseparability

Low-temperature chlorination roasting technology for the simultaneous recovery of valuable metals from spent LiCoO_(2)cathode material

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 80-91页

作者： Junjie Shi Changle hou Jingjing Dong Dong Chen Jianzhong Li Key Laboratory for Ecological Metallurgy of Multimetallic Mineral(Ministry of Education) Northeastern UniversityShenyang 110819China School of Metallurgy Northeastern UniversityShenyang 110819China

With the continuous increase in the disposal volume of spent lithium-ion batteries(LIBs),properly recycling spent LIBs has become essential for the advancement of the circular *** study presents a systematic analysis of the chlorination roasting kinetics and proposes a new two-step chlorination roasting process that integrates thermodynamics for the recycling of LIB cathode *** activation energy for the chloride reaction was 88.41 kJ/mol according to thermogravimetric analysis–derivative thermogravimetry data obtained by using model-free,model-fitting,and Z(α)function(αis conversion rate).Results indicated that the reaction was dominated by the first-order(F1)model when the conversion rate was less than or equal to 0.5 and shifted to the second-order(F2)model when the conversion rate exceeded *** conditions were determined by thoroughly investigating the effects of roasting temperature,roasting time,and the mass ratio of NH_(4)Cl to LiCoO_(2).Under the optimal conditions,namely 400℃,20 min,and NH_(4)Cl/LiCoO_(2)mass ratio of 3:1,the leaching efficiency of Li and Co reached 99.43% and 99.05%,*** of the roasted products revealed that valuable metals in LiCoO_(2)transformed into CoCl_(2) and ***,the reaction mechanism was elucidated,providing insights for the establishment of a novel low-temperature chlorination roasting technology based on a crystal structure *** technology can guide the development of LIB recycling processes with low energy consumption,low secondary pollution,high recovery efficiency,and high added value.

关键词： spent lithium-ion battery thermodynamics chlorination roasting kinetics circular economy

Feasibility of Surfgrass Phyllospadix iwatensis Transplantation Along the Rocky Coasts of Shandong Peninsula,China

在线全文

学校读者我要写书评

暂无评论

Journal of Ocean University of China 2022年第6期21卷 1575-1584页

作者： ZHAN Jiaxin CHENG ran hou Xin WANG huan ZHANG Peidong KANG Bin LI Wentao The Key Laboratory of Mariculture Ministry of EducationOcean University of ChinaQingdao 266003China

Surfgrass Phyllospadix iwatensis is a dominant seagrass species along the east coast of Shandong Peninsula,*** other seagrasses in the world,surfgrass has been declining in the past *** assess the possibility of transplanting *** in the coastal area,a new surfgrass transplant system was designed and applied to conduct a surfgrass transplantation experiment in a tide pool and a subtidal area,and its survival,morphological and physiological parameters were examined from May 2019 to June *** results showed that after a year since transplantation,more than 65%of the transplants survived and the survival rate was higher in the subtidal site than in the tide *** morphological measurements including shoot height,leaf width,number of leaves per shoot,rhizome diameter and elongation rate,and number of roots per shoot were all higher in the subtidal area than in the tide pool,showing that the *** transplants grew better in the subtidal area than in the tide pool in the study *** results indicated that surfgrass can be transplanted in the two areas,and it is probably more suitable in subtidal area than in tide pool in the study area.

关键词： surfgrass Phyllospadix iwatensis rocky substrate seagrass transplantation transplant survival growth

Viscosity and structure relationship with equimolar substitution of CaO with MgO in the CaO–MgO–Al_(2)O_(3)–SiO_(2)slag melts

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 70-79页

作者： Yong hou Shuo Zhang Jie Dang Jia Guo Hanghang Zhou Xuewei Lü College of Materials Science and Engineering Chongqing UniversityChongqing 400044China Chongqing Key Laboratory of Vanadium-Titanium Metallurgy and New Materials Chongqing UniversityChongqing 400044China

Currently,the Al_(2)O_(3)content in the high-alumina slag systems within blast furnaces is generally limited to 16wt%–18.5wt%,making it challenging to overcome this *** most studies that concentrated on managing the MgO/Al_(2)O_(3)ratio or basicity,this paper explored the effect of equimolar substitution of MgO for CaO on the viscosity and structure of a high-alumina CaO-MgO-Al_(2)O_(3)-SiO_(2)slag system,providing theoretical guidance and data to facilitate the application of high-alumina *** results revealed that the viscosity first decreased and then increased with higher MgO substitution,reaching a minimum at 15mol%MgO *** transform infrared spectroscopy(FTIR)results found that the depths of the troughs representing[SiO_(4)]tetrahedra,[AlO_(4)]tetrahedra,and Si-O-Al bending became progressively deeper with increased MgO *** of the Raman spectra showed that the average number of bridging oxygens per Si atom and the X_(Q^(3))/X_(Q^(2))(X_(Q^(i))is the molar fraction of Q^(i) unit,and i is the number of bridging oxygens in a[SiO_(4)]tetrahedral unit)ratio increased from 2.30 and 1.02 to 2.52 and 2.14,respectively,indicating a progressive polymerization of the silicate structure.X-ray photoelectron spectroscopy(XPS)results highlighted that non-bridging oxygen content decreased from 77.97mol% to 63.41mol% with increasing MgO concentration,whereas bridging oxygen and free oxygen contents *** analysis demonstrated a gradual increase in the polymerization degree of the tetrahedral structure with the increase in MgO ***,bond strength is another important factor affecting the slag *** occurrence of a viscosity minimum can be attributed to the complex evolution of bond strengths of non-bridging oxygens generated during depolymerization of the[SiO_(4)]and[AlO_(4)]tetrahedral structures by CaO and MgO.

关键词： aluminosilicate viscosity structure spectroscopy

A Novel Impact Tension Testing for OFHC Copper Bars under Local Strain Controlled

在线全文

学校读者我要写书评

暂无评论

Chinese Physics Letters 2011年第1期28卷 156-159页

作者： MA Dong-Fang hou Yan-Jun CHEN Da-Nian WU Shan-Xing WANG huan-ran Mechanics and Materials Science Research Center Ningbo University Ningbo 315211

A novel high-speed tensile facility （HSTF） with special fixture is applied to research the dynamic failure char- acteristics of oxygen-free higfl-conductivity （OFHC） copper bars at different levels of strain. The experimental tests are numerically simulated involving void evolution, It is indicated that the localized strains at necking region computed with the adjusted Johnson Cook model and the Zerilli Armstrong model are consistent with the experimental results.

关键词： Condensed matter: structural mechanical & thermal

Interfacial Zn2+-solvation regulator towards reversible and stable Zn anode

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 684-692页

作者： Miao Zhou Xiongbin Luo Hang Li Shan Guo Zhuang Tong Xiaotao Zhou Xu Li Zhaohui hou Shuquan Liang Guozhao Fang College of Mechanical Engineering Key Laboratory of Hunan Province for Advanced Carbon-based Functional Materials Hunan Institute of Science and Technology School of Materials Science and Engineering Key Laboratory of Electronic Packaging and Advanced Functional Materials of Hunan Province Central South University College of Materials and Metallurgy Guizhou University National Energy Metal Resources and New Materials Key Laboratory Central South University

Aqueous zinc-ion batteries （AZIBs） are fundamentally challenged by the instability of the electrode/electrolyte interface,predominantly due to irreversible zinc （Zn） deposition and hydrogen ***,the intricate mechanisms behind the electrochemical discrepancies induced by interfacial Zn2+-solvation and deposition behavior demand comprehensive *** molecules endowed with special functional groups （such as hydroxyl,carboxyl,etc.） have the potential to significantly optimize the solvation structure of Zn2+and regulate the interfacial electric double layer （EDL）.By increasing nucleation overpotential and decreasing interfacial free energy,these functional groups facilitate a lower critical nucleation radius,thereby forming an asymptotic nucleation model to promote uniform Zn ***,this study presents a pioneering approach by introducing trace amounts of n-butanol as solvation regulators to engineer the homogenized Zn （H-Zn） anode with a uniform and dense *** interfacial reaction and structure evolution are explored by in/ex-situ experimental techniques,indicating that the H-Zn anode exhibits dendrite-free growth,no by-products,and weak hydrogen evolution,in sharp contrast to the bare ***,the H-Zn anode achieves a remarkable Zn utilization rate of approximately 20% and simultaneously sustains a prolonged cycle life exceeding 500 ***,the H-Zn//NH4V4O10（NVO） full battery showcases exceptional cycle stability,retaining 95.04%capacity retention after 400 cycles at a large current density of 5 A *** study enlightens solvation-regulated additives to develop Zn anode with superior utilization efficiency and extended operational lifespan.

关键词： Aqueous zinc-ion batteries Interfacial reaction Asymptotic nucleation model Reversible and stable Zn anode

Plasmonic tandem heterojunctions enable high-efficiency charge transfer for broad spectrum photocatalytic hydrogen production

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 710-720页

作者： Wenxuan Chen Xiu-Qing Qiao Guo Hui Bojing Sun Dongfang hou Meidi Wang Xueqian Wu Tao Wu Dong-Sheng Li College of Materials and Chemical Engineering Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion Materials China Three Gorges University Hubei Three Gorges Laboratory College of Chemistry and Materials Science and Guangdong Provincial Key Laboratory of Supramolecular Coordination Chemistry Jinan University

Rational engineering of semiconductor photocatalysts for efficient hydrogen production is of great significance but still challenging,primarily due to the limitations in charge transfer ***,a fascinating plasmonic tandem heterojunction with the hc-CdS/Mo2C@C heterostructure is aimfully prepared for effectively promoting the charge separation kinetics of the CdS photocatalyst via the synergistic strategy of phase junction,Schottky junction,and photothermal *** difference in atomic configuration between cubic-CdS （c-CdS） and hexagonal-CdS （h-CdS） leads to effective charge separation through a typical Ⅱ charge transfer mechanism,and plasmonic Schottky junction further extracts the electrons in the hc-CdS phase junction to realize gradient charge ***,the photothermal effect of Mo2C@C helps to expand the light absorption,accelerate charge transfer kinetics,and reduce the hydrogen evolution energy *** carbon layer provides a fast channel for charge transfer and protects the photocatalyst from *** a result,the optimized hc-CMC photocatalyst exhibits a significantly high photocatalytic H2production activity of 28.63 mmol/g/h and apparent quantum efficiency of 61.8%,surpassing most of the reported *** study provides a feasible strategy to enhance the charge transfer kinetics and photocatalytic activity of CdS by constructing plasmonic tandem heterogeneous junctions.

关键词： Heterojunctions LSPR Photocatalyst Phase junction Schottky junction Photothermal effect