检索结果-南通市图书馆

Rare Metals 2020年第12期39卷 1464-1468页

作者： Si Li huai-ying zhou Zhong-Min Wang Jian-Qiu Deng Qing-Rong Yao School of Material Science and Engineering Guilin University of Electronic TechnologyGuilin541004China

La_(1-x)Mg_(x)Ni_(2.8)Co_(0.4)Mn_(0.1)Al_(0.2)(x=0.25,0.30,0.33)alloys were prepared by induction melting followed by annealing treatments(1,073 K)for 10 *** structure and electrochemical properties of La_(1-x)Mg_(x)Ni_(2.8)Co_(0.4)Mn_(0.1)Al_(0.2)(x=0.25,0.30,0.33)hydrogen storage alloys were investigated by X-ray powder diffraction(XRD)and electrochemical measurement *** results reveal that all the alloys mainly consist of LaNi5 phase and La2 Ni7 *** electrochemical experiments demonstrate that the substitution of Mg for La can increase the maximum discharge capacity and improve the high-rate dischargeability of the alloy *** high-rate dischargeability of alloy electrodes increases from 39.4%to63.1%with x increasing from 0.25 to 0.33 at discharge current density of 1,500 mA·g^(-1).However,the addition of Mg reduces the cycling stability of the ***,the results obtained from the electrochemical impedance spectroscopy and linear polarization measurements show that the hydriding kinetics on the hydrogen storage alloys are controlled by charge-transfer step.

关键词： Hydrogen storage alloy Electrochemical properties High-rate dischargeability Electrochemical impedance spectroscopy

Structural evolutions and electronic properties of Au_nGd(n=6–15)small clusters:A first principles study

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2018年第8期27卷 229-234页

作者： Han-Xing Zhang Chao-Hao Hu Dian-Hui Wang Yan Zhong huai-ying zhou Guang-Hui Rao Guangxi Key Laboratory of Information Materials Guilin University of Electronic TechnologyGuilin 541004China School of Materials Science and Engineering Guilin University of Electronic TechnologyGuilin 541004China

Structural, electronic, and magnetic properties of AunGd （n = 6-15） small clusters are investigated by using first principles spin polarized calculations and combining with the ab-initio evolutionary structure simulations. The calculated binding energies indicate that after doping a Gd atom AunGd cluster is obviously more stable than a pure AUn＋l cluster. Au6Gd with the quasiplanar structure has a largest magnetic moment of 7.421 gB. The Gd-4f electrons play an important role in determining the high magnetic moments of AunGd clusters, but in Au6Gd and Aul2Gd clusters the unignorable spin polarized effects from the Au-6s and Au-5d electrons further enhance their magnetism. The HOMO-LUMO （here, HOMO and LUMO stand for the highest occupied molecular orbital, and the lowest unoccupied molecular orbital, respectively） energy gaps of munGd clusters are smaller than those of pure AUn＋l clusters, indicating that AunGd clusters have potential as new catalysts with enhanced reactivity.

关键词： AunGd clusters structural evolution first-principles calculations electronic structure magneticproperty

Realizing remarkable sodium storage performance of a Sn-based anode material with an oxide-alloy intergrowth structure

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2022年第5期41卷 1512-1519页

作者： Luo-Yang Li Feng-Bin Huang Jing Deng Peng Liu Feng Wang Qing-Rong Yao Zhong-Min Wang huai-ying zhou Jian-Qiu Deng School of Materials Science and Engineering&Guangxi Key Laboratory of Information Materials Guilin University of Electronic TechnologyGuilin 541004China School of Materials Science and Engineering Xiangtan UniversityXiangtan 411105China

As a promising anode for sodium-ion batteries(SIBs),the performance of SnO_(2) is still limited by inferior electronic conductivity and large volume *** address this issue,herein,the intergrowth structured SnO_(2)/CoSn_(2)@C nanocomposite has been fabricated by a two-step process combining hydrothermal synthesis with carbon coating.

关键词： performance herein anode

A Comprehensive Review of Thermal Performance Improvement of High-Temperature Heat Pipes

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 625-647页

作者： CHEN Qihan zhou Jingzhi zhou Guohui CHENG Keyong huai Xiulan WEI Gaosheng School of Energy Power and Mechanical EngineeringNorth China Electric Power UniversityBeijing100096China Nanjing Institute of Future Energy System Nanjing211135China Institute of Engineering Thermophysics Chinese Academy of SciencesBeijing100190China

Energy efficiency issues are being focused on the growing concern of global warming and environmental *** high-temperature heat pipe(HTHP) is an effective and environmental-friendly heat transfer device employed in many industries,including solar power generation,high-temperature flue gas waste heat recovery,industrial furnaces,nuclear industries,and *** a critical factor in HTHPs,thermal performance is mainly introduced in the entire *** date,most reviews have been published concerning one or several application ***,to the best of authors' knowledge,it is hard to find a review discussing how to improve the thermal performance of HTHPs ***,the impact on the performance of three main components of HTHPs over the past 30 years is introduced:the working fluid,the HTHP structure,and the wick ***,it is a considerable review of the optimal operating conditions for each direction,and we expect this paper contribute to improving the thermal performance of ***,current numerical simulations and theoretical research on the heat transfer limit of HTHPs are *** significant hypotheses used in numerical simulations and the present theoretical studies are compiled ***,some potential future directions and tentative suggestions for HTHP research are put forward.

关键词： high-temperature heat pipe review alkali metal heat pipe thermal performance

Stretchable and self-healing conductive fibers from hierarchical silver nanowires-assembled network

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第2期17卷 763-770页

作者： ying-ying Wu Hong Chen Fan Zhang Pan Guo Haili Qin huai-Ping Cong Anhui Province Key Laboratory of Advanced Catalytic Materials and Reaction Engineering School of Chemistry and Chemical EngineeringHefei University of TechnologyHefei 230009China

Conductive fibers(CFs)with features of high conductivity,stretchability,self-healability,and electromechanical stability are key components of the increasingly popular wearable ***,since the lack of structural design of conductive network and interfacial interaction between soft polymer and conductive additives,it is still hard to enable CFs to meet above ***,we describe a facial drawing method from a hydrogel reservoir which is remolded into ultrathin and stretchable CFs with excellent multi-responsive *** hydrogel reservoir was fabricated in synergy of an ice-templating method and in situ polymerization using the assembled framework as a *** on the effective fabrication mechanism,the diameter of CFs could be well-tuned from 90 to 400μm by adjusting the dipping depth of the glass rod,accompanied with conductivity increased from 0.75 to 2.5 S/*** the hierarchical network structure was well maintained in the CFs,professional performances have been proved on the stretchability and electromechanical *** presence of massive hydrogen bonding and Ag–S bond enabled the CFs with excellent self-healability under the conditions of contact,electric field,and near infrared light,***,the CFs with high sensing property could be integrated into an advanced textile sensor through an effective healing-induced integration strategy,demonstrating its great potentials as superior two-dimensional(2D)electronic skins.

关键词： conductive fibers self-assembled silver nanowires Ag–S coordination self-healing flexible sensors

Mechanical and damping performances of TPMS lattice metamaterials fabricated by laser powder bed fusion

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Foundry 2024年第4期21卷 327-333页

作者： Yan-peng Wei huai-qian Li Jing-jing Han ying-chun Ma Hao-ran zhou Jing-chang Cheng Jian Shi Zhi-quan Miao Bo Yu Feng Lin National Key Laboratory of Advanced Casting Technologies Shenyang Research Institute of Foundry Co.Ltd.CAMShenyang 110022China Department of Mechanical Engineering Tsinghua UniversityBeijing 100084China Key Laboratory of Space Physics Beijing 100076China

Lattice metamaterials based on three-period minimum surface(TPMS)are an effective means to achieve lightweight and high-strength materials which are widely used in various fields such as aerospace and ***,its vibration and noise reduction,and damping properties have not been fully ***,in this study,the TPMS structures with parameterization were designed by the method of surface migration,and the TPMS structures with high forming quality was manufactured by laser powder bed fusion(LPBF).The mechanical properties and energy absorption characteristics of the beam and TPMS structures were studied and compared by quasi-static *** modal shapes of the beam lattice structures and TPMS structures were obtained by the free modal analysis,and the damping properties of two structures were obtained by modal *** the two structures after heat treatment with the same porosity of 70%,the yield strength of the beam lattice structure reaches 40.76 MPa,elastic modulus is 20.38 GPa,the energy absorption value is 32.23 MJ·m^(-3),the damping ratio is 0.52%.The yield strength,elastic modulus,energy absorption value,and damping ratio of the TPMS structure are 50.74 MPa,25.37 GPa,47.34 MJ·m^(-3),and 0.99%,*** results show that TPMS structures exhibit more excellent mechanical properties and energy absorption,better damping performance,and obvious advantages in structural load and vibration and noise reduction compared with the beam lattice structures under the same porosity.

关键词： lattice metamaterials TPMS energy absorption damping laser powder bed fusion

Inter-chromosomal insertions into wild-type chromosomes induced by SCRaMbLE

在线全文

学校读者我要写书评

暂无评论

Frontiers of Chemical Science and Engineering 2024年第9期18卷 125-135页

作者： Sijie zhou Junyanrui Li Xichen Cui ying Wang ying-Jin Yuan Frontiers Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering(Ministry of Education) School of Chemical Engineering and TechnologyTianjin UniversityTianjin 300072China Frontiers Research Institute for Synthetic Biology Tianjin UniversityTianjin 300072China

Genomic rearrangements play a crucial role in shaping biological phenotypic diversity and driving species *** chromosome rearrangement and modification by LoxP-mediated evolution(SCRaMbLE)has been applied to explore large-scale genomic rearrangements,yet it has been observed that these rearrangements occur exclusively in genomic regions containing loxPsym ***,we found that SCRaMbLE of synthetic yeast harboring synthetic chromosome V and X can generate a variety of synthetic segment insertions into wild-type chromosomes,ranging from 1 to 300 ***,it was revealed that the novel insertions impacted the transcriptional level of neighboring regions and affected the production of exemplar pathway of ***,our results improve the understanding of the ability of SCRaMbLE to generate complex structural variations in nonsynthetic regions and provide a potential model to explore genomic transposable events.

关键词： genomic rearrangements synthetic yeast genome SCRaMbLE inter-chromosomal insertions synthetic biology

Structural Engineering of Hierarchical Magnetic/Carbon Nanocomposites via In Situ Growth for High-Efficient Electromagnetic Wave Absorption

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第9期16卷 262-278页

作者： Xianyuan Liu Jinman zhou ying Xue Xianyong Lu Key Laboratory of Bio‑Inspired Smart Interfacial Science and Technology of Ministry of Education School of ChemistryBeihang UniversityBeijing 100191People’s Republic of China

Materials exhibiting high-performance electromagnetic wave absorption have garnered considerable scientific and technological attention,yet encounter significant *** new materials and innovative structural design concepts is crucial for expanding the application field of electromagnetic wave ***,hierarchical structure engineering has emerged as a promising approach to enhance the physical and chemical properties of materials,providing immense potential for creating versatile electromagnetic wave absorption ***,an exceptional multi-dimensional hierarchical structure was meticulously devised,unleashing the full microwave attenuation capabilities through in situ growth,selfreduction,and multi-heterogeneous interface *** hierarchical structure features a three-dimensional carbon framework,where magnetic nanoparticles grow in situ on the carbon skeleton,creating a necklace-like ***,magnetic nanosheets assemble within this *** impedance matching was achieved by precisely adjusting component proportions,and intelligent integration of diverse interfaces bolstered dielectric *** obtain Fe_(3)O_(4)-Fe nanoparticles/carbon nanofibers/Al-Fe_(3)O_(4)-Fe nanosheets composites demonstrated outstanding performance with a minimum reflection loss(RLmin)value of−59.3 dB and an effective absorption bandwidth(RL≤−10 dB)extending up to 5.6 GHz at 2.2 *** notable accomplishments offer fresh insights into the precision design of high-efficient electromagnetic wave absorption materials.

关键词： Electromagnetic wave absorption Hierarchical structure In situ growth Self-reduction

Advancements in machine learning for material design and process optimization in the field of additive manufacturing

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第2期21卷 101-115页

作者： Hao-ran zhou Hao Yang huai-qian Li ying-chun Ma Sen Yu Jian shi Jing-chang Cheng Peng Gao Bo Yu Zhi-quan Miao Yan-peng Wei National Key Laboratory of Advanced Casting Technologies Shenyang Research Institute of Foundry Co.Ltd.CAMShenyang 110022China Department of Mechanical Engineering Tsinghua UniversityBeijing 100084China Key Laboratory of Space Physics Beijing 100076China School of Materials Science and Engineering Nanyang Technological University639798Singapore

Additive manufacturing technology is highly regarded due to its advantages,such as high precision and the ability to address complex geometric ***,the development of additive manufacturing process is constrained by issues like unclear fundamental principles,complex experimental cycles,and high *** learning,as a novel artificial intelligence technology,has the potential to deeply engage in the development of additive manufacturing process,assisting engineers in learning and developing new *** paper provides a comprehensive overview of the research and applications of machine learning in the field of additive manufacturing,particularly in model design and process ***,it introduces the background and significance of machine learning-assisted design in additive manufacturing *** then further delves into the application of machine learning in additive manufacturing,focusing on model design and process ***,it concludes by summarizing and forecasting the development trends of machine learning technology in the field of additive manufacturing.

关键词： additive manufacturing machine learning material design process optimization intersection of disciplines embedded machine learning

Carbon-based nanomaterials cause toxicity by oxidative stress to the liver and brain in Sprague-Dawley rats

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第6期35卷 54-64页

作者： ying-ying Xu Chan Jin Meng Wu Jian-Ye zhou Hui-Ling Wei Department of Gastroenterology China-Japan Friendship HospitalBeijing 100029China Shanghai Institute of Applied Physics Chinese Academy of SciencesShanghai 201800China Institute of Particle and Nuclear Physics College of PhysicsHenan Normal UniversityXinxiang 453007China

Carbon-based nanomaterials have important research significance in various disciplines,such as composite materials,nanoelectronic devices,biosensors,biological imaging,and drug ***,the human and ecological risks associated with carbon-based nanomaterials have received increasing ***,the biological safety of carbon based nanomaterials has not been systematically *** this study,we used different types of carbon materials,namely,graphene oxide(GO),single-walled carbon nanotubes(SWCNTs),and multiwalled carbon nanotubes(MWCNTs),as models to observe their distribution and oxidative damage in *** results of Histopathological and ultrastructural examinations indicated that the liver and lungs were the main accumulation targets of these ***-μ-XRF analysis revealed that SWCNTs and MWCNTs might be present in the *** shows that the three types of carbon-based nanomaterials could cross the gas-blood barrier and eventually reach the liver *** addition,SWCNTs and MWCNTs could cross the blood-brain barrier and accumulate in the cerebral *** increase in ROS and MDA levels and the decrease in GSH,SOD,and CAT levels indicated that the three types of nanomaterials might cause oxidative stress in the *** suggests that direct instillation of these carbon-based nanomaterials into rats could induce ROS *** addition,iron(Fe)contaminants in these nanomaterials were a definite source of free ***,these nanomaterials did not cause obvious damage to the rat brain *** deposition of selenoprotein in the rat brain was found to be related to oxidative stress and Fe *** information may support the development of secure and reasonable applications of the studied carbon-based nanomaterials.

关键词： Carbon-based nanomaterials Oxidative stress Trace element distribution TEM SR-μ-XRF