检索结果-南通市图书馆

Origin and evolution of false brinelling and fretting corrosion under rolling conditions

Friction 2024年第4期12卷 618-631页

作者： xin JIA Lu HUANG Miao SUN Wenbin LI National Institute of Metrology Beijing 100029China Yantai Tiancheng Machinery Co. Ltd.Yantai 264006China

Rolling bearings working in oscillating applications often suffer from false brinelling and fretting corrosion that limit their service *** present,the study of oscillation-induced failures is primarily dominated by a large number of sliding and bench ***,most of the previous work are not able to fully describe the two closely related but different failure *** this study,the origin and evolution of the two failures are thoroughly investigated under strictly controlled oscillating rolling *** results show that failure evolves from false brinelling to fretting corrosion under dry friction conditions regardless of the oscillation *** process is accompanied by a large area peeling and serious oxidation,and the oxygen content increases from 2.50 wt%to 21.22 wt%.Oxidation is a crucial factor in the evolution of false brinelling into fretting ***,the distribution of microwear and oxygen content depend on the oscillation *** lubrication conditions,the friction coefficient(COF)is smaller in the initial stage and led to local slip or transient instability of rolling ***,the size of the wear marks and COF increased and appeared to be larger than those under a dry friction ***,grease can separate the contact surfaces,only surface deformation owing to false brinelling and slight damage at the roughness level *** evolution of false brinelling and fretting corrosion is also closely related to residual *** brinelling often occurrs with residual stress accomulation,meanwhile,the residual stress increases from 120 to 3.0 *** peeling occurs,residual stress is *** failure pattern transformed from false brinelling to fretting corrosion and is accompanied by *** far,none of investigation is able to show satisfactory evolution of oscillating-induced failures,this study may contribute to more scientific understanding of rolling bearings against long-

关键词： oscillating false brinelling fretting corrosion wear residual stress

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Impact response and energy absorption of metallic buffer with entangled wire mesh damper

引用

Defence Technology（防务技术） 2024年第5期35卷 137-150页

作者： Chao Zheng Jun Wu Mangong Zhang xin Xue Institute of Metal Rubber&Vibration Noise School of Mechanical Engineering and AutomationFuzhou UniversityFuzhou 350116China Wuhan Second Ship Design and Research Institute Wuhan 430205China

An innovative metallic buffer consisting of series-connected hat-shaped entangled wire mesh damper(EWMD)and parallel springs are proposed in this work to enhance the reliability of engineering *** impact response and the energy dissipation mechanism of hat-shaped EWMD under different quasi-static compression deformations(2-7 mm)and impact heights(100-200 mm)are investigated using experimental and numerical *** results demonstrate distinct stages in the quasi-static mechanical characteristics of hat-shaped EWMD,including stiffness softening,negative stiffness,and stiffness *** loss factor gradually increases with increasing compression deformation before entering the stiffness hardening *** impact loads,the hat-shaped EWMD exhibits optimal impact energy absorption when it enters the negative stiffness stage(150 mm),resulting in the best impact isolation effect of metallic ***,the impact energy absorption significantly decreases when hat-shaped EWMD enters the stiffness hardening ***,quasi-static compression analysis after experiencing different impact loads reveals the disappearance of the negative stiffness ***,with increasing impact loads,the stiffness hardening point progressively shifts to an earlier stage.

关键词： Metallic buffer Hat-shaped EWMD Drop impact Energy absorption characteristics Mechanical behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A molecular insight into coke formation process of vacuum residue in thermal cracking reaction

引用

Petroleum Science 2024年第3期21卷 2130-2138页

作者： Ji-Guang Li xin Guo Huan-Di Hou Heavy Oil Processing Department Sinopec Research Institute of Petroleum Processing Co.LtdBeijing100083China

Understanding the coking behaviors has been considered to be really essential for developing better vacuum residue processing technologies.A battery of thermal cracking tests of typical vacuum residue at 410℃ with various reaction time were performed to evaluate the coke formation *** total yields of ideal components including naphtha,atmospheric gas oil(AGO)and vacuum gas oil(VGO)of thermal cracking reactions increased from 10.89%to 40.81%,and the conversion ratios increased from8.05%to 43.3.%with increasing the reaction time from 10 to 70 *** asphaltene content increased from 12.14%to a maximum of 22.3.%and then decreased,and this maximum of asphaltene content occurred at the end of the coking induction *** asphaltenes during the coking induction period,at the end and after coking induction period of those tested thermal cracking reactions were characterized to disclose the structure changing rules for coke formation process,and the coke formation pathways were discussed to reveal the coke formation process at molecular level.

关键词： Vacuum residue Thermal cracking Asphaltene Coking induction period Sulfur Nitrogen

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Highly selective electrosynthesis of 3.4-dihydroisoquinoline accompanied with hydrogen production over three-dimensional hollow CoNi-based microarray electrocatalysts

引用

Nano Research 2024年第4期17卷 2509-2519页

作者： Yu xin Liyu Chen Yingwei Li Kui Shen Guangdong Provincial Key Lab for Green Chemical Product Technology School of Chemistry and Chemical EngineeringSouth China University of TechnologyGuangzhou 510640China State Key Laboratory of Pulp and Paper Engineering School of Chemistry and Chemical EngineeringSouth China University of TechnologyGuangzhou 510640China

Electrocatalytic oxidation reaction of biomass-based derivatives is an excellent candidate to replace water oxidation for obtaining both value-added products and hydrogen(H_(2)),but the exploration of competent electrocatalysts is still highly ***,two new types of three-dimensional self-supported hollow microarrays containing CoNi layered double hydroxide(CoNi-LDH)and N-doped carbon nanosheets decorated with CoNi alloyed nanoparticles(CoNi-NC)on carbon cloth(CC)are prepared,which are further used as efficient electrocatalysts for tetrahydroisoquinoline(THIQ)electrooxidation and hydrogen evolution reaction(HER),*** demonstrate that the Co-modulated electronic environment for Ni(II)/Ni(Ⅲ)redox-looping in CoNi-LDH is the main factor to boost the selectivity of 3.4-dihydroisoquinoline(DHIQ)for the indirect electrooxidation process of *** functional theory(DFT)calculations reveal that the Ni(Ⅲ)/Co(Ⅲ)dual sites of CoNi-LDH exhibit enhanced adsorption for THIQ but poorer adsorption for DHIQ compared to pure Co(Ⅲ)or Ni(Ⅲ).Therefore,the Ni(Ⅲ)/Co(Ⅲ)dual sites can effectively inhibit the peroxidation of DHIQ to isoquinoline(IQ)over CoNi-LDH,thus improving the selectivity of DHIQ to nearly 100%,much higher than that of its pure Ni ***,CC@CoNi-NC can deliver high HER activity with low overpotential(40 mV@10 mA·cm^(-2))and high exchange current density(3.08 mA·cm^(-2)).Impressively,the assembled flow-cell device with CC@CoNi-LDH anode and CC@CoNi-NC cathode only requires low cell voltage and electricity consumption of 1.6 V and 3.50 kWh per cubic meter of H_(2)(@25 mA·cm^(-2)).

关键词： highly selective electrosynthesis dihydroisoquinolines hydrogen evolution reaction metal-organic frameworks hollow microarrays

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Numerical Analysis of Heat Transfer Characteristics to Supercritical CO_(2) in a Vertical Mini-Channel:Transition and Pseudo-Boiling

引用

Journal of Thermal Science 2024年第1期33卷 101-113页

作者： YUAN Baoqiang WANG Wei xin Gongming DU Wenjing School of Energy and Power Engineering Shandong UniversityJi'nan 250061China

Large eddy simulations have been conducted to study upward transitional flows and heat transfer characteristics of supercritical CO_(2) in a vertical *** numerical simulation was carried out on a modified buoyantPimpleFOAM solver in OpenFOAM 7,and was verified using experiment *** results indicate that increasing the Grashof numbers can reduce the flow stability and make the flow transition *** are four stages of heat transfer in the transition process,i.e.,weakened,improved,recovered and normal heat *** heat transfer phenomena in the transition process were explained from three perspectives:thermal boundary layer theory,turbulent transport and pseudo-boiling *** transfer enhancement during transition is related to the transport of supercritical molecular clusters,and these molecular clusters are regarded as pseudo-bubbles in pseudo-boiling *** flow pattern of the pseudo-phases in the dia-Widom process contains single-phase flow,steady pseudo-film flow,unsteady pseudo-film flow,partial pseudo-bubbles flow and flocculent pseudo-film ***-bubbles have similar behaviors to subcritical bubbles,i.e.,break-up,deformation,condensation and *** researches in this work are favorable for understanding the heat transfer mechanism of supercritical fluids during flow transition.

关键词： supercritical heat transfer large eddy simulation transition pseudo-boiling

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical study of the influence of the atmospheric pressure on the thermal environment in the passenger cabin

引用

Building Simulation 2024年第2期17卷 253-265页

作者： xin Su Yu Guo Zhengwei Long Yi Cao Tianjin Key Lab.of Indoor Air Environmental Quality Control School of Environmental Science and EngineeringTianjin UniversityTianjin300072China Shanghai Aircraft Design and Research Institute Jinke RoadPudong DistrictShanghai201210China

The cabin air pressure remains lower than the horizontal atmospheric pressure when the airplane is in *** pressure is one of the parameters that must be taken into consideration while studying the thermal environment of an airplane *** are still no reference values for aircraft cabins despite the fact that numerous studies on low pressure heat transfer have demonstrated the connection between convective heat transfer coefficient(CHTC)and air *** this paper,a correction method for CHTC under low pressure conditions was established by using the dummy heat dissipation in the low-pressure cabin *** this basis,a thermal environment simulation model was developed,then was applied to the simulation of a seven-row aircraft cabin containing 42 passengers,and the CHTC and heat loss of dummy surface in the cabin were ***,the results of PMV calculated by using heat dissipation and air parameters at sampling points were *** results show that the modified CHTC can accurately reflect the cabin thermal environment under low pressure conditions,and the correction of CHTC can be realized by adjusting the turbulent Prandtl number,which is nonlinear correlated with the *** simulation results of the thermal environment in the seven-row cabin show that the CHTC changes by about 42%before and after *** air pressure decreases during take-off,which reduces the average CHTC of the crew surface from 5.09 W/(m^(2)·K)to 4.56 W/(m^(2)·K),but the air temperature rises by about 0.2°C as a *** deviation of PMV results calculated by using simulated heat loss data and using air parameters of measuring points in space is up to 0.5,but the latter is representative for calculating the thermal comfort level of the whole cabin.

关键词： low pressure aircraft cabin simulation heat dissipation convective heat transfer coefficient

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Probabilistic seismic inversion based on physics-guided deep mixture density network

引用

Petroleum Science 2024年第3期21卷 1611-1631页

作者： Qian-Hao Sun Zhao-Yun Zong xin Li National Key Laboratory of Deep Oil and Gas China University of Petroleum(East China)Qingdao266580ShandongChina Laoshan Laboratory Qingdao266580ShandongChina CNOOC Research Institute Ltd. Beijing100028China

Deterministic inversion based on deep learning has been widely utilized in model parameters *** by logging data,seismic data,wavelet and modeling operator,deterministic inversion based on deep learning can establish nonlinear relationships between seismic data and model ***,seismic data lacks low-frequency and contains noise,which increases the non-uniqueness of the *** conventional inversion method based on deep learning can only establish the deterministic relationship between seismic data and parameters,and cannot quantify the uncertainty of *** order to quickly quantify the uncertainty,a physics-guided deep mixture density network(PG-DMDN)is established by combining the mixture density network(MDN)with the deep neural network(DNN).Compared with Bayesian neural network(BNN)and network dropout,PG-DMDN has lower computing cost and shorter training time.A low-frequency model is introduced in the training process of the network to help the network learn the nonlinear relationship between narrowband seismic data and low-frequency *** addition,the block constraints are added to the PG-DMDN framework to improve the horizontal continuity of the inversion *** illustrate the benefits of proposed method,the PG-DMDN is compared with existing semi-supervised inversion *** synthetic data examples of Marmousi II model are utilized to quantify the influence of forward modeling part,low-frequency model,noise and the pseudo-wells number on inversion results,and prove the feasibility and stability of the proposed *** addition,the robustness and generality of the proposed method are verified by the field seismic data.

关键词： Deep learning Probabilistic inversion Physics-guided Deep mixture density network

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Selection Method for New Energy Output Guaranteed Rates Considering Optimal Energy Storage Configuration

引用

CSEE Journal of Power and Energy Systems 2024年第2期10卷 539-547页

作者： xin Cheng Tong Wu Wei Yao Yan Yang Guangdong Power Grid Corporation Guangzhou 510620China State Key Laboratory of Advanced Electromagnetic Engineering and Technology and School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China

The output of new energy represented by wind power and photovoltaic power features volatility and randomness. It is a practical approach to use the guaranteed rate with statistical characteristics to analyze the output coefficient of new energy. However, there is a lack of analysis and demonstration on the value of the new energy output guaranteed rate. To solve this problem, a selection method for the new energy output guaranteed rate considering optimal energy storage configuration is proposed. First, the influence of the new energy output guaranteed rate on the new energy output coefficient is analyzed. Secondly, with the goal of minimizing the comprehensive costs, an optimal configuration model of energy storage based on the output guaranteed rate of new energy is constructed, and particle swarm optimization is used for the optimization solution. Then, according to the optimal energy storage configuration results under different guaranteed rates, a reasonable new energy output guaranteed rate is determined by maximizing the comprehensive benefits obtained from energy storage. Finally, an example applied to the power grid in an area of Guangdong in Southern China is provided to illustrate the effectiveness of the proposed method.

关键词： Energystorage optimization guaranteed output guaranteed rate new energy consumption

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nonlinear metamaterial enabled aeroelastic vibration reduction of a supersonic cantilever wing plate

引用

Applied Mathematics and Mechanics(English Edition) 2024年第10期45卷 1749-1772页

作者： Peng SHENG xin FANG Dianlong YU Jihong WEN Laboratory of Science and Technology on Integrated Logistics Support College of Intelligence Science and TechnologyNational University of Defense TechnologyChangsha 410073China

The violent vibration of supersonic wings threatens aircraft *** paper proposes the strongly nonlinear acoustic metamaterial(NAM)method to mitigate aeroelastic vibration in supersonic wing *** employ the cantilever plate to simulate the practical behavior of a *** aeroelastic vibration model of the NAM cantilever plate is established based on the mode superposition method and a modified third-order piston *** aerodynamic properties are systematically studied using both the timedomain integration and frequency-domain harmonic balance *** presenting the flutter and post-flutter behaviors of the NAM wing,we emphasize more on the preflutter broadband vibration that is prevalent in *** results show that the NAM method can reduce the low-frequency and broadband pre-flutter steady vibration by 50%-90%,while the post-flutter vibration is reduced by over 95%,and the critical flutter velocity is also slightly *** clarified,the significant reduction arises from the bandgap,chaotic band,and nonlinear resonances of the NAM *** reduction effect is robust across a broad range of parameters,with optimal performance achieved with only 10%attached *** work offers a novel approach for reducing aeroelastic vibration in aircraft,and it expands the study of nonlinear acoustic/elastic metamaterials.

关键词： nonlinear acoustic metamaterial(NAM) hypersonic aeroelastic vibration vibration reduction fluid-structure interaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Real-Time Intelligent Diagnosis of Co-frequency Vibration Faults in Rotating Machinery Based on Lightweight-Convolutional Neural Networks

引用

Chinese Journal of Mechanical Engineering 2024年第2期37卷 264-282页

作者： xin Pan Xiancheng Zhang Zhinong Jiang Guangfu Bin Beijing Key Laboratory of Health Monitoring and Self-recovery for High-End Mechanical Equipment College of Mechanical and Electrical EngineeringBeijing University of Chemical TechnologyBeijing 100029China Key Laboratory of Engine Health Monitoring-Control and Networking(Ministry of Education) College of Mechanical and Electrical EngineeringBeijing University of Chemical TechnologyBeijing 100029China College of Mechanical Engineering Hunan University of Science and TechnologyXiangtan 411201China

The co-frequency vibration fault is one of the common faults in the operation of rotating equipment,and realizing the real-time diagnosis of the co-frequency vibration fault is of great significance for monitoring the health state and carrying out vibration suppression of the *** engineering scenarios,co-frequency vibration faults are highlighted by rotational frequency and are difficult to identify,and existing intelligent methods require more hardware conditions and are exclusively ***,Lightweight-convolutional neural networks(LW-CNN)algorithm is proposed in this paper to achieve real-time fault *** critical parameters are discussed and verified by simulated and experimental signals for the sliding window data augmentation *** on LW-CNN and data augmentation,the real-time intelligent diagnosis of co-frequency is ***,a real-time detection method of fault diagnosis algorithm is proposed for data acquisition to fault *** is verified by experiments that the LW-CNN and sliding window methods are used with high accuracy and real-time performance.

关键词： Co-frequency vibration Real-time diagnosis LW-CNN Data augmentation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：