检索结果-南通市图书馆

Acta Metallurgica Sinica(English Letters) 2024年第4期37卷 648-664页

作者： Zhaochen Yu Kaixuan Feng Shuyun Deng yang Chen hong yan.honggun song Chao Luo Zhi Hu School of Advanced Manufacturing Nanchang UniversityNanchang330031China Institute for Advanced Study Nanchang UniversityNanchang330031China

The phosphate protective film and micro-galvanic corrosion of biological Mg-3Zn-xNd (x = 0, 0.6, 1.2) alloys were investigated by scanning and transmission electron microscopy, quasi-in-situ observation, scanning Kelvin probe force microscopy (SKPFM) and electrochemical tests. The results revealed the Mg-Zn-Nd phases formed in Mg-3Zn alloy contained with Nd. Adding Nd resulted in a significant decline in the cracks of the phosphate protective film and micro-galvanic corrosion of alloys, which were recorded by quasi-in-situ observation. In addition, the Volta potential difference of Mg-Zn-Nd/α-Mg (~ 188 mV) was lower than MgZn/α-Mg (~ 419 mV) and Zn-rich/α-Mg (~ 260 mV), and the corrosion rates of alloys markedly decreased after the addition of 0.6 wt% Nd. The improvement in corrosion resistance of Nd-containing alloys was mainly attributed to the following: (i) the addition of Nd reduced the Volta potential difference (second phases/α-Mg);(ii) the phosphate protective film containing Nd_(2)O_(3) deposited on the surface of the alloys, effectively preventing the penetration of harmful anions.

关键词： Magnesium alloys Quasi-in-situ observation Phosphate protective film Scanning Kelvin probe force microscopy(SKPFM) Micro-galvanic corrosion

In-situ AFM and quasi-in-situ studies for localized corrosion in Mg-9Al-1Fe-(Gd) alloys under 3.5 wt.% NaCl environment

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 1170-1185页

作者： Junping Shen Tao Lai Zheng Yin yang Chen Kun Wang hong yan.honggun song Ruiliang Liu Chao Luo Zhi Hu School of Advanced Manufacturing Nanchang UniversityNanchang 330031China Institute for Advanced Study Nanchang UniversityNanchang 330031China Singapore Centre for Environmental Life Sciences Engineering Nanyang Technological University60 Nanyang Drive 637751Singapore

Revealing the localized corrosion process of Mg alloy is considered as one of the most significant ways for improving its corrosion *** reliable monitor should be high distinguishability and real-time in liquid ***,Mg-9Al-1Fe and Mg-9Al-1Fe-1Gd alloys were designed to highlight the impact of intermetallic on the corrosion ***-situ AFM with a special electrolyte circulation system and quasi-in-situ SEM observation were used to monitor the corrosion process of the designed ***-EDS and TEM-SAED were applied to identify the intermetallic in the designed alloys,and their volta potentials were measured by *** to the real-time and real-space in-situ AFM monitor,the corrosion process consisted of dissolution of anodicα-Mg phase,accumulation of corrosion products around cathodic phase and shedding of some fine cathodic ***,the localized corrosion process of Mg alloy was revealed combined with the results of the monitor of corrosion process and Volta potential difference.

关键词： Magnesium Localized corrosion In-situ AFM SKPFM Corrosion behaviour.

Effect of nano-carbon black content on wetting phenomenon of molten steel and alumina-carbon ceramic filter substrates

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第8期31卷 1900-1913页

作者： Jin-wen song Wen yan Zhe Chen Ying Liu Shao-song hong The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina National-provincial Joint Engineering Research Center of High Temperature Materials and Lining Technology Wuhan University of Science and TechnologyWuhan 430081HubeiChina Jiangsu Sheng Nai New Materials Co. Ltd.Taizhou 225503JiangsuChina

The effect of nano-carbon black content(O,8 and 12 wt.%)on the wettability of molten steel on Al_(2)O_(3)-C substrates was investigated by the sessile drop wetting method at 1500℃ under argon *** the beginning of the wetting experiment,the contact angle decreased with the increase in nano-carbon black *** the wetting experiment progressed,FeAl_(2)0_(4) layer and sheet Al_(2)O_(3) layer were found at the interface between the molten steel and the Al_(2)O_(3)-C substrates with O and 8 wt.% nano-carbon black content,and the contact angle deceased with *** the content of nano-carbon black was 12 wt.%,a large number of nano-Al_(2)O_(3) whiskers were observed,which made the contact angle between the molten steel and Al_(2)O_(3)-C substrate become *** on the scanning electron microscope and energy dispersive spectrometry results,the formation mechanism of FeAl2O4 layer and Al_(2)O_(3) layer and the interfacial reaction mechanism were proposed.

关键词： Contact angle Nano-carbon black Al_(2)O_(3)-C substrate Molten steel Interfacial reaction

Purification performance on molten steel of novel Al_(2)O_(3)-based ceramic filter prepared from microporous powder and nano-Al_(2)O_(3) powder

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第6期31卷 1535-1546页

作者： Zhe Chen Wen yan Ying Liu Guang-qiang Li Shao-song hong Nan Li The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Jiangsu Shengnai New Materials Co. Ltd.Taizhou 225534JiangsuChina

Reticulated ceramic foam filters provide an effective way to purify molten steel by removing non-metallic *** proposed a novel strategy to improve the purification performance of Al_(2)O_(3)-based ceramic filters by using microporous corundum-spinel raw materials to replace dense raw *** kinds of Al_(2)O_(3)-based ceramic filters fabricated from dense α-Al_(2)O_(3) micro-powder or microporous corundum-spinel powder were selected to carry out the immersion tests with molten *** the one hand,the higher surface roughness of the filter skeleton prepared from microporous raw materials increased the adsorption capacity of skeleton surface on inclusions in molten *** the other hand,the higher apparent porosity and larger pore size of the filter skeleton were more beneficial to the penetration of molten steel in the micropores of *** reaction process at the solid-liquid interface also improved the wettability of the interface between skeleton and molten steel,resulting in a larger penetration depth and a better adsorption effect on the *** summary,the novel Al_(2)O_(3)-based ceramic filter prepared with microporous corundum-spinel powder and addition of 5 wt.% nano-Al_(2)O_(3) powder reduced the total oxygen content of the steel from 40.2×10^(-4) to 12.7×10^(-4) wt.% by 68.4% and the Al content from 0.46 to 0.18 wt.% by 60.9% after immersion test,presenting the most excellent purification performance on molten steel.

关键词： Al_(2)O_(3)-based ceramic filter Microporous corundum-spinel powder Non-metallic inclusion-Microstructure Molten steel purification

Reconfigurable memlogic long wave infrared sensing with superconductors

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第5期13卷 908-920页

作者： Bingxin Chen Huanyi Xue hong Pan Liping Zhu Xiaomi yan Jingzhe Wang yanru song Zhenghua An State Key Laboratory of Surface Physics and Institute for Nanoelectronic Devices and Quantum Computing Department of PhysicsFudan UniversityShanghai 200438China. ShanghaiTech Quantum Device Lab ShanghaiTech UniversityShanghai 201210China. Shanghai Qi Zhi Institute 41th FloorAI TowerNo.701 Yunjin RoadXuhui DistrictShanghai 200232China. Yiwu Research Institute of Fudan University Chengbei RoadYiwu City 322000 ZhejiangChina. Zhangjiang Fudan International Innovation Center Fudan UniversityShanghai 201210China

Optical sensors with in-cell logic and memory capabilities offer new horizons in realizing machine vision beyond von Neumann architectures and have been attempted with two-dimensional materials,memristive oxides,phasechanging materials *** the unparalleled performance of superconductors with both quantum-limited optical sensitivities and ultra-wide spectrum coverage,here we report a superconducting memlogic long-wave infrared sensor based on the bistability in hysteretic superconductor-normal phase *** cooperatively by electrical and optical pulses,the device offers deterministic in-sensor switching between resistive and superconducting(hence dissipationless)states with persistence>105 *** results in a resilient reconfigurable memlogic system applicable for,e.g.,encrypted ***,a high infrared sensitivity at 12.2μm is achieved through its in-situ metamaterial perfect absorber *** work opens the avenue to realize all-in-one superconducting memlogic sensors,surpassing biological retina capabilities in both sensitivity and wavelength,and presents a groundbreaking opportunity to integrate visional perception capabilities into superconductor-based intelligent quantum machines.

关键词： wave superconductor quantum

Effect of annealing treatment on the microstructure and mechanical properties of warm-rolled Mg-Zn-Gd-Ca-Mn alloys

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第10期31卷 2208-2220页

作者： Yifan song Xihai Li Jinliang Xu Kai Zhang Yaozong Mao hong yan Huiping Li Rongshi Chen School of Materials Science and Engineering Shandong University of Science and TechnologyQingdao 266590China Shi-changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Shandong Key Laboratory of Advanced Aluminium Materials and Technology Binzhou Institute of TechnologyBinzhou 256606China

The basal texture of traditional magnesium alloy AZ31 is easy to form and exhibits poor plasticity at room *** address these problems,a multi-micro-alloyed high-plasticity Mg-1.8Zn-0.8Gd-0.1Ca-0.2Mn(wt%)alloy was developed using the unique role of rare earth and Ca solute *** addition,the influence of the annealing process on the grain size,second phase,texture,and mechanical properties of the warm-rolled sheet at room temperature was analyzed with the goal of developing high-plasticity mag-nesium alloy sheets and obtaining optimal thermal-mechanical treatment *** results show that the annealing temperature has a significant effect on the microstructure and properties due to the low alloying content:there are small amounts of larger-sized block and long string phases along the rolling direction(RD),as well as several spherical and rodlike particle phases inside the *** increas-ing annealing temperature,the grain size decreases and then increases,and the morphology,number,and size of the second phase also change *** particle phase within the grains vanishes at 450℃,and the grain size increases *** the full recrystal-lization stage at 300-350℃,the optimum strength-plasticity comprehensive mechanical properties are presented,with yield strengths of 182.1 and 176.9 MPa,tensile strengths of 271.1 and 275.8 MPa in the RD and transverse direction(TD),and elongation values of 27.4%and 32.3%,***,there are still some larger-sized phases in the alloy that influence its mechanical properties,which offers room for improvement.

关键词： Mg-Zn-Gd-Ca-Mn alloy annealing treatment microstructure texture dynamic recrystallization mechanical properties

Type I interferon pathway in pediatric systemic lupus erythematosus

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

World Journal of Pediatrics 2024年第7期20卷 653-668页

作者： Yu Zhou hong‑Mei song Department of Pediatrics Peking Union Medical College HospitalChinese Academy of Medical SciencesBeijingChina State Key Laboratory of Complex Severe and Rare Diseases Peking Union Medical College HospitalBeijingChina

Background The role of type I interferon(IFN-I)signaling in systemic lupus erythematosus(SLE)has been well ***,unanswered questions remain regarding the applicability of these findings to pediatric-onset *** aim of this review is to provide an overview of the novel discoveries on IFN-I signaling in pediatric-onset *** sources A literature search was conducted in the PubMed database using the following keywords:“pediatric systemic lupus erythematosus”and“type I interferon”.Results IFN-I signaling is increased in pediatric SLE,largely due to the presence of plasmacytoid dendritic cells and pathways such as cyclic GMP-AMP synthase–stimulator of interferon genes–TANK-binding kinase 1 and Toll-like receptor(TLR)4/*** extracellular traps and oxidative DNA damage further stimulate IFN-I *** variants in IFN-I-related genes,such as IFN-regulatory factor 5 and tyrosine kinase 2,are linked to SLE susceptibility in pediatric *** addition,type I interferonopathies,characterized by sustained IFN-I activation,can mimic SLE symptoms and are thus important to *** on interferonopathies also contribute to exploring the pathogenesis of *** IFN-I activation is crucial for SLE diagnosis and *** IFNstimulated gene expression and serum IFN-α2 levels are common *** cytometry markers such as CD169 and galectin-9 are promising ***-IFN therapies,such as sifalimumab and anifrolumab,show promise in adult patients with SLE,but their efficacy in pediatric patients requires further *** kinase inhibitors are another treatment option for severe pediatric SLE *** This review presents an overview of the IFN-I pathway in pediatric *** the intricate relationship between IFN-I and pediatric SLE may help to identify potential diagnostic markers and targeted therapies,paving the way for improved patient care and outcomes.

关键词： Interferonopathies Pediatric systemic lupus erythematosus Type I interferon

Ultra-flexible all-in-one anti-freeze photothermally enhanced supercapacitors

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第8期17卷 7221-7229页

作者： Yongxin Lu Keke Li yan-yan song Zhida Gao Condense matter of physics College of ScienceNortheazistern UniversityShenyang 110004China

Wearable electronics powered by flexible energy storage devices have captured global *** low-temperature conditions,unfortunately,solidification of flexible hydrogel electrolyte and decreased pseudo-capacity of these devices largely hamper their practical *** this study,photothermally-active Prussian blue(PB)was introduced onto poly(3,4-ethylenedioxythiophene)/polyacrylamide(PEDOT/PAM)networks to address the challenges of electrolyte solidification and degraded pseudo-capacitance for flexible all-in-one device at low *** as-constructed PB/PEDOT/PAM hydrogel device delivers stable electrochemical performance and remarkable mechanical property with 1652%***,this hydrogel device well retains its flexibility in cold environment with a freezing point below−30℃.The incorporation of PB extends the voltage range to 1.5 V as a single device,thus significantly enhancing the electrochemical performance as an all-inone integrated *** from the outstanding photo-to-thermal conversion ability of embedded PB nanocubes,the temperature of the assembled all-in-one PB/PEDOT/PAM device increased from^(−2)0 to 17.7℃ after solar-light irradiation for only 5 ***,the degraded pseudo-capacitance was subsequently boosted to 287.1%of its original capacitance at−20℃.This study establishes a connection between flexible all-solid-state hydrogel devices and photothermally enhanced pseudocapacitors in freezing environments,thereby expanding the potential applications of multi-functional pseudo-capacitors.

关键词： all-in-one energy storage devices all-solid-state photothermal flexible low temperatures

SHR-A1811(antibody-drug conjugate)in advanced HER2-mutant non-small cell lung cancer:a multicenter,open-label,phase 1/2 study

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Signal Transduction and Targeted Therapy 2024年第8期9卷 3483-3492页

作者： Ziming Li Zhengbo song Wei hong Nong yang Yongsheng Wang hong Jian Zibin Liang Sheng Hu Min Peng yan Yu yan Wang Zicong Jiao Kaijing Zhao Ke song You Li Wei Shi Shun Lu Shanghai Lung Cancer Center Shanghai Chest HospitalShanghai Jiaotong University School of MedicineShanghai 200030China Phase I Clinical Trial Ward Zhejiang Cancer HospitalHangzhou 310000China Department of Thoracic Oncology Zhejiang Cancer HospitalHangzhou 310000China Department of Lung&Gastrointestinal Oncology Hunan Cancer HospitalChangsha 410031China Thoracic Oncology Ward/Cancer Center West China Hospital of Sichuan UniversityChengdu 610041China Department of Thoracic Oncology The Fifth Affiliated Hospital of Sun Yat-Sen UniversityZhuhai 51900China Department of Medical Oncology Hubei Cancer HospitalWuhan 43000China Department of Oncology Renmin Hospital of Wuhan UniversityWuhan 430200China Department of Thoracic Medicine Harbin Medical University Cancer HospitalHarbin 150081China Department of Medical Oncology Cancer HospitalChinese Academy of Medical SciencesBeijing 100021China Geneplus-Beijing CoLtd.Beijing 102206China Jiangsu Hengrui Pharmaceuticals Co.Ltd.Shanghai 200120China

A dose-escalation and expansion,phase 1/2 study(***,NCT04818333)was conducted to assess the novel antibodydrug conjugate SHR-A1811 in pretreated HER2-altered advanced non-small cell lung cancer(NSCLC).Here,we report results from the phase 1 *** who had previously failed or were intolerant to platinum-based chemotherapy were enrolled and received SHR-A1811 intravenously at doses of 3.2 to 8.0 mg/kg every 3 *** escalation followed a Bayesian logistic regression model that included overdose control,with subsequent selection of tolerable levels for dose ***,63 patients were enrolled,including 43 receiving a recommended dose for expansion of 4.8 mg/*** patients had HER2-mutant ***-limiting toxicity occurred in one patient in the 8.0 mg/kg dose ***≥3 treatment-related adverse events occurred in 29(46.0%)*** patient in the 6.4 mg/kg cohort died due to interstitial lung *** of April 11,2023,the 4.8 mg/kg cohort showed an objective response rate of 41.9%(95%Cl 27.0-57.9),and a disease control rate of 95.3%(95%Cl 84.2-99.4).The median duration of response was 13.7 months,with 13 of 18 responses *** median progression-free survival was 8.4 months(95%CI 7.1-15.0).SHR-A1811 demonstrated favourable safety and clinically meaningful efficacy in pretreated advanced HER2-mutantNSCLC.

关键词： SHR HER2 doses

Design,fabrication,and characterization of hierarchical mechanical metamaterials

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Mechanical Engineering 2024年第1期19卷 73-83页

作者： Jian song Junfei yan Bengang YI Automotive Engineering Research Institute BYD Auto Industry Co.Ltd.Shenzhen 518000China College of Civil and Transportation Engineering Shenzhen UniversityShenzhen 518060China

Natural mechanical materials,such as bamboo and bone,often exhibit superior specific mechanical properties due to their hierarchical porous *** the principle of hierarchy as inspiration can facilitate the development of hierarchical mechanical metamaterials(HMMs)across multiple length scales via 3D *** this work,we propose self-similar HMMs that combine octet-truss(OCT)architecture as the first and second orders,with cubic architecture as the third or more *** HMMs were fabricated using stereolithography 3D printing,with the length sizes ranging from approximately 200µm to the centimeter *** compressive stress–strain behaviors of HMMs exhibit a zigzag characteristic,and the toughness and energy absorption can be significantly enhanced by the hierarchical *** compressive moduli are comparable to that of natural materials,and the strengths are superior to that of most polymer/metal foams,alumina hollow/carbon lattices,and other natural ***,the flexural stress–strain curves exhibit a nonlinear behavior,which can be attributed to the hierarchical architecture and local damage *** relatively high mechanical properties can be attributed to the synergistic effect of the stretch-dominated OCT architecture and the bending-dominated cube ***,an ultralight HMM-integrated unmanned aerial vehicle(HMM-UAV)was successfully designed and *** HMM-UAV is~85%lighter than its bulk counterpart,remarkably extending the flight duration time(~53%).This work not only provides an effective design strategy for HMMs but also further expands the application benchmark of HMMs.

关键词： 3D printing mechanical metamaterials hierarchical architecture mechanical behavior unmanned aerial vehicle(UAV)