检索结果-南通市图书馆

Earthquake Research Advances 2024年第1期4卷 4-13页

作者： Yali Guo haofeng li.peng li.ng Renwei Xiong Chaozhong Hu Yueren Xu Key Laboratory of Earthquake Prediction Institute of Earthquake ForecastingChina Earthquake AdministrationBeijing100036China

Both M_(W) 7.8 and M_(W) 7.5 earthquakes occurred in southeastern Türkiye on February 6,2023,resulting in numerous buildings collapsing and serious *** the distribution of coseismic surface ruptures and secondary disasters surrounding the epicentral area is important for post-earthquake emergency and disaster ***-resolution Maxar and GF-2 satellite data were used after the events to extract the location of the rupture surrounding the first epicentral *** results show that the length of the interpreted surface rupture zone(part of)is approximately 75 km,with a coseismic sinistral dislocation of 2-3 m near the epicenter;however,this reduced to zero at the tip of the southwest section of the East Anatolia Fault ***,dense soil liquefaction pits were triggered along the rupture *** events are in the western region of the Eurasian Seismic Belt and result from the subduction and collision of the Arabian and African Plates toward the Eurasian *** western region of the Chinese mainland and its adjacent areas are in the eastern section of the Eurasian Seismic Belt,where seismic activity is controlled by the collision of the Indian and Eurasian *** China and Türkiye have independent tectonic histories.

关键词： 2023 Türkiye M_(w)7.8 earthquake Coseismic surface rupture East anatolian fault zone Eurasian seismic zone Remote sensing interpretation

Stability assessment of tree ring growth of Pinus armandii Franch in response to climate change based on slope directions at the Lubanling in the Funiu Mountains,China

在线全文

学校读者我要写书评

暂无评论

Journal of Forestry Research 2024年第3期35卷 197-208页

作者： Jinkuan li Jianfeng peng Xiaoxu Wei Meng peng Xuan li Yameng liu Jiaxin li College of Geography and Environmental Science Henan UniversityKaifeng 475004People’s Republic of China Key Laboratory of Earth System Observation and Simulation of Henan Province Kaifeng 475004People’s Republic of China

Global warming will affect growth strategies and how trees will *** compare the response of tree radial growth to climate warming in different slope directions,samples of Pinus armandii Franch were collected and treering chronologies developed on northern and western slopes from the Lubanling in the Funiu *** analyses showed that two chronologies were mainly limited by temperatures in the previous June–August and the combination of temperatures and moisture in the current May–*** difference of the climate response to slopes was small but not *** growth of the LBL01 site on the northern slope was affected by the combined maximum and minimum temperatures,while that of the LBL02 site was affected by maximum *** regards to moisture,radial growth of the trees on the north slope was influenced by the relative humidity in the current May–July,while on the western slope,it was affected by the relative humidity in the previous June–August,the current May–July and the precipitation in the current May–*** the change in climate,the effects of the main limiting factors on growth on different slopes were visible to a certain extent,but the differences in response of trees on different slopes gradually decreased,which might be caused by factors such as different slope directions and the change in diurnal temperature *** results may provide information for forest protection and ecological construction in this region,and a scientific reference for future climate reconstruction.

关键词： Tree ring width Lubanling Pinus armandii Franch Slope direction Climate response

Optimal Design of the Modular Joint Drive Train for Enhancing Cobot Load Capacity and Dynamic Performance

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2024年第3期37卷 26-40页

作者： peng li Zhenguo Nie Zihao li Xinjun liu Department of Mechanical Engineering Tsinghua UniversityBeijing 100084China State Key Laboratory of Tribology in Advanced Equipment Tsinghua UniversityBeijing 100084China Beijing Key Lab of Precision/Ultra-precision Manufacturing Equipments and Control Tsinghua UniversityBeijing 100084China

Automation advancements prompts the extensive integration of collaborative robot(cobot)across a range of *** to the commonly used design approach of increasing the payload-to-weight ratio of cobot to enhance load capacity,equal attention should be paid to the dynamic response characteristics of cobot during the design process to make the cobot more *** this paper,a new method for designing the drive train parameters of cobot is ***,based on the analysis of factors influencing the load capacity and dynamic response characteristics,design criteria for both aspects are established for cobot with all optimization design criteria normalized within the design ***,with the cobot in the horizontal pose,the motor design scheme is discretized and it takes the joint motor diameter and gearbox speed ratio as optimization design ***,all the discrete values of the optimization objectives are obtained through the enumeration method and the Pareto front is used to select the optimal solution through multi-objective *** on the cobot design method proposed in this paper,a six-axis cobot is designed and compared with the commercial *** result shows that the load capacity of the designed cobot in this paper reaches 8.4 kg,surpassing the 5 kg load capacity commercial cobot which is used as a *** minimum resonance frequency of the joints is 42.70 Hz.

关键词： Multi-objective optimization Modular joint drive train design Load capacity Dynamic response performance

Optimal Timing of Business Conversion for Solvency Improvement

在线全文

学校读者我要写书评

暂无评论

Acta Mathematicae Applicatae Sinica 2024年第3期40卷 744-757页

作者： peng li Ming ZHOU School of Finance Nanjing University of Finance and EconomicsNanjing 210023China Center for Applied Statistics and School of Statistics Renmin University of ChinaBeijing 100872China

In this paper,we study the optimal timing to convert the risk of business for an insurance company in order to improve its *** cash flow of company evolves according to a jump-diffusion *** conversion option offers the company an opportunity to transfer the jump risk business *** exchange for this option,the company needs to pay both fixed and proportional transaction *** proportional cost can also be seen as the profit loading of the jump risk *** formulated this problem as an optimal stopping *** solving this stopping problem,we find that the optimal timing of business conversion mainly depends on the profit loading of the jump risk business.A larger profit loading would make the conversion option *** fixed cost,however,only delays the optimal timing of business *** the end,numerical results are provided to illustrate the impacts of transaction costs and environmental parameters to the optimal strategies.

关键词： optimal stopping jump-diffusion process conversion option

Path-Following Control With Obstacle Avoidance of Autonomous Surface Vehicles Subject to Actuator Faults

在线全文

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第4期11卷 956-964页

作者： li-Ying Hao Gege Dong Tieshan li Zhouhua peng the School of Marine Electrical Engineering Dalian Maritime UniversityDalian 116026China the School of Automation Engineering University of Electronic Science and Technology of ChinaChengdu 611731the Navigation CollegeDalian Maritime UniversityDalian 116026 the Yangtze Delta Region Institute(Huzhou) Huzhou 313001China

This paper investigates the path-following control problem with obstacle avoidance of autonomous surface vehicles in the presence of actuator faults,uncertainty and external *** surface vehicles inevitably suffer from actuator faults in complex sea environments,which may cause existing obstacle avoidance strategies to *** reduce the influence of actuator faults,an improved artificial potential function is constructed by introducing the lower bound of actuator efficiency *** nonlinear state observer,which only depends on measurable position information of the autonomous surface vehicle,is used to address uncertainties and external *** using a backstepping technique and adaptive mechanism,a path-following control strategy with obstacle avoidance and fault tolerance is designed which can ensure that the tracking errors converge to a small neighborhood of *** with existing results,the proposed control strategy has the capability of obstacle avoidance and fault tolerance ***,the comparison results through simulations are given to verify the effectiveness of the proposed method.

关键词： Actuator faults autonomous surface vehicle(ASVs) improved artificial potential function nonlinear state observer obstacle avoidance

Climate-growth relationships of Pinus tabuliformis along an altitudinal gradient on Baiyunshan Mountain,Central China

在线全文

学校读者我要写书评

暂无评论

Journal of Forestry Research 2024年第1期35卷 202-212页

作者： Xiaoxu Wei Jianfeng peng Jinbao li Jinkuan li Meng peng Xuan li Yameng liu Jiaxin li College of Geography and Environmental Science Henan UniversityKaifeng 475004People’s Republic of China Key Laboratory of Earth System Observation and Simulation of He’nan Province Kaifeng 475004People’s Republic of China Department of Geography University of Hong KongPokfulamHong Kong SARPeople’s Republic of China HKU Shenzhen Institute of Research and Innovation Shenzhen 518057People’s Republic of China

A set of standard chronologies for tree-ring width(TRW),earlywood width(EWW)and latewood width(LWW)in Pinus tabuliformis *** an altitudi-nal gradient(1450,1400,and 1350 m a.s.l.)on Baiyunshan Mountain,Central China to analyze the effect of varying temperature and precipitation on growth along the *** analyses showed that at all three altitudes and the TRW and EWW chronologies generally had signifi-cant negative correlations with mean and maximum tem-peratures in the current April and May and with minimum temperatures in the prior July and August,but significant positive correlations with precipitation in the current *** were generally significantly negative between LWW chronologies and all temperatures in the prior July and August,indicating that the prior summer temperature had a strong lag effect on the growth of *** that increased with *** correlation with the standard-ized precipitation evapotranspiration index(SPEI)confirmed that wet conditions in the current May promoted growth of TR and EW at all *** altitudinal differences were also found;at 1400 m,there were significant positive correlations between EWW chronologies and SPEI in the current April and significant negative correlations between LWW chronologies and SPEI in the current September,but these correlations were not significant at 1450 *** 1350 m,there were also significant negative correlations between the TRW and the EWW chronologies and SPEI in the prior October and the current July and between LWW chronology and SPEI in the current August,but these cor-relations were not significant at 1400 *** correlation results showed a stable response of EWW in relation to the SPEI in the current May at all three altitudes and of LWW to maximum temperature in the prior July-August at 1400 m from 2002 to *** EWW chronology at 1400 m and the LWW chronology at 1450 m were identified as more suitable for climate reconstruction.T

关键词： Tree rings Climate response Altitudinal gradient Baiyunshan Mountain Pinus tabuliformis Carr

Unsupervised construction of health indicator for rotating machinery via multi-criterion feature selection and attentive variational autoencoder

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第5期67卷 1524-1537页

作者： li XinYu CHEng ChangMing peng ZhiKe State Key Laboratory of Mechanical System and Vibration Shanghai Jiao Tong UniversityShanghai200240China School of Mechanical Engineering Ningxia UniversityYinchuan750021China

Health indicator(HI)construction is a crucial task in degradation evaluation and facilitates the prognostic and health management(PHM)of rotating *** interference from artificial labeling,the HI construction approaches in an unsupervised manner have attracted substantial ***,current unsupervised methods generally struggle with two problems:(1)ignorance of both redundancy between features and global variability of features during the feature selection process;(2)inadequate utilization of information from different sampling *** tackle these problems,this work develops a novel unsupervised approach for HI construction that integrates multi-criterion feature selection and the Attentive Variational Autoencoder(Attentive VAE).Explicitly,a multi-criterion feature selection(Mc FS)algorithm together with an elaborately designed metric is proposed to determine a superior feature subset,considering the relevance,the redundancy,and the global variability of features ***,for the adequate utilization of the information from distinct sampling moments,a deep learning model named Attentive VAE is *** Attentive VAE is solely fed with the selected features in the health state for model training and the HI is derived through the reconstruction error to reveal the degradation degree of *** case studies based on genuine experimental datasets are involved to quantitatively evaluate the superiority of the developed approach,demonstrating its superiority over other unsupervised methods for characterizing degradation *** effectiveness of both the Mc FS algorithm and the Attentive VAE is verified by ablation experiments,respectively.

关键词： health indicator(HI) unsupervised learning multi-criterion feature selection global variability attention mechanism

April-September minimum temperature reconstruction based on Sabina tibetica ring-width chronology in the central eastern Tibetan Plateau,China

在线全文

学校读者我要写书评

暂无评论

Journal of Forestry Research 2024年第2期35卷 134-145页

作者： Teng li Jianfeng peng Tsun Fung Au Jinbao li School of Geography and Remote Sensing Guangzhou UniversityGuangzhou 510006People’s Republic of China College of Geography and Environmental Science Henan UniversityKaifeng 475004People’s Republic of China Institute for Global Change Biology School for Environment and SustainabilityUniversity of MichiganAnn ArborMIUSA Department of Ecology and Evolutionary Biology University of MichiganAnn ArborMIUSA Department of Geography University of Hong KongHong Kong SARPeople’s Republic of China HKU Shenzhen Institute of Research and Innovation Shenzhen 518057People’s Republic of China

Minimum temperatures have remarkable impacts on tree growth at high-elevation sites on the Tibetan Plateau,but the shortage of long-term and high-resolution paleoclimate records inhibits understanding of recent minimum temperature *** this study,a warm season(April–September)reconstruction is presented for the past 467 years(1550–2016)based on Sabina tibetica ring-width chronology on the lianbaoyeze Mountain of the central eastern Tibetan *** warm periods and eight cold periods were ***-term minimum temperature variations revealed a high degree of coherence with nearby *** correlations between our reconstruction and global sea surface temperatures suggest that warm season minimum temperature anomalies in the central eastern Tibetan Plateau were strongly influenced by large-scale ocean atmospheric circulations,such as the El Ni?o-Southern Oscillation and the Atlantic Multidecadal Oscillation.

关键词： Tree-ring analysis Sabina tibetica Minimum temperatures Central eastern Tibetan Plateau Climate change

Joint fuzzy background and adaptive foreground model for moving target detection

在线全文

学校读者我要写书评

暂无评论

Frontiers of Computer Science 2024年第2期18卷 93-106页

作者： Dawei ZHAng peng WAng Yongfeng DOng linhao li Xin li School of Artificial Intelligence Hebei University of TechnologyTianjin 300401China Lane Department of Computer Science and Electrical Engineering West Virginia UniversityMorgantownWV 26506-6109USA

Moving target detection is one of the most basic tasks in computer *** conventional wisdom,the problem is solved by iterative optimization under either Matrix Decomposition(MD)or Matrix Factorization(MF)*** utilizes foreground information to facilitate background *** uses noise-based weights to fine-tune the *** both noise and foreground information contribute to the recovery of the *** jointly exploit their advantages,inspired by two framework complementary characteristics,we propose to simultaneously exploit the advantages of these two optimizing approaches in a unified framework called Joint Matrix Decomposition and Factorization(JMDF).To improve background extraction,a fuzzy factorization is *** fuzzy membership of the background/foreground association is calculated during the factorization process to distinguish their contributions of both to background *** describe the spatio-temporal continuity of foreground more accurately,we propose to incorporate the first order temporal difference into the group sparsity constraint *** temporal constraint is adjusted *** foreground and the background are jointly estimated through an effective alternate optimization process,and the noise can be modeled with the specific probability *** experimental results of vast real videos illustrate the effectiveness of our *** with the current state-of-the-art technology,our method can usually form the clearer background and extract the more accurate ***-noise experiments show the noise robustness of our method.

关键词： matrixdecomposition matrix factorization generalized sparsity noise modeling

Self-propelled Leidenfrost droplets on femtosecond-laser-induced surface with periodic hydrophobicity gradient

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第2期6卷 502-509页

作者： Bohong li Lan Jiang Xiaowei li Zhipeng Wang peng Yi Laser Micro/Nano Fabrication Laboratory School of Mechanical EngineeringBeijing Institute of TechnologyBeijingPeople’s Republic of China Beijing Institute of Technology Chongqing Innovation Center ChongqingPeople’s Republic of China Yangtze Delta Region Academy of Beijing Institute of Technology JiaxingPeople’s Republic of China

The controllable transfer of droplets on the surface of objects has a wide application prospect in the fields of microfluidic devices,fog collection and so *** Leidenfrost effect can be utilized to significantly reduce motion ***,the use of 3D structures limits the widespread application of self-propulsion based on Leidenfrost droplets in microelectromechanical *** manipulate Leidenfrost droplets,it is necessary to create 2D or quasi-2D *** this study,femtosecond laser is applied to fabricate a surface with periodic hydrophobicity gradient(SPHG),enabling directional self-propulsion of Leidenfrost *** field analysis within the Leidenfrost droplets reveals that the vapor layer between the droplets and the hot surface can be modulated by the SPHG,resulting in directional propulsion of the inner *** viscous force between the gas and liquid then drives the droplet to move.

关键词： self-propelled Leidenfrost droplets periodic hydrophobicity gradient femtosecond laser fabrication