检索结果-南通市图书馆

Chinese Journal of Aeronautics 2024年第3期37卷 391-403页

作者： Wei hao Andrews LARBI Hongkang dong dongyun WAng Shenghu LI Zhejiang Provincial Key Laboratory of Urban Rail Transit Intelligent Operation and maintenance Technology and Equipment Zhejiang Normal UniversityJinhua 321004China College of Engineering Zhejiang Normal UniversityJinhua 321004China Hangzhou Lilong Hydraulic Co. LtdHangzhou 311200China

The cylinder block/valve plate interface is one of the most critical frictional interfaces of the swashplate-type axial piston ***,the poor lubrication interface caused rapid wear and high friction loss in an elastohydrodynamic lubrication system,decreasing the pump *** resistant bronze coatings were fabricated on 38CrmoAl substrate by Physical Vapor Deposition(PVD)and Chemical Vapor Deposition(CVD),***-on-disc wear tests were performed to comparatively investigate the wear behaviors of the coatings and bulk ductile iron *** can be found that the PVD-bronze coating exhibited better wear resistance than the other two *** enhanced wear resistance was attributed to the unique composite microstructure and desired mechanical strength,which could resist to mechanical shear and spallation,decreasing friction *** appropriate hardness of(1.33±0.07)GPa could be beneficial for enhancing its wear *** PVD-bronze coating possessed a much lower and stable coefficient of friction(about 0.1)and wear rate(about 6000μm3.N-1.m-1)under the loading forces of about 100 N after 20 *** wear mechanism was the abrasive wear.

关键词： Aircraft hydraulic pump Bronze Coatings Wear resistance mechanisms

Research on the Dynamic Compressibility of Polyurethane microcellular Elastomer and its Application for Impact Resistance

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第8期42卷 1185-1197页

作者： Zhi-Ying Zhao hao Jiang Xiao-dong Li Xu-dong Zhang Xing Su mei-Shuai Zou School of materials Science and Engineering Beijing Institute of TechnologyBeijing 100081China

The packaging materials with cushioning performance are used to prevent the internal contents from being damaged by the impact and vibration of external *** polyurethane microcellular elastomers(PUmEs)can absorb energy through cell collapse and molecular chain *** this study,PUmEs with different densities were investigated by scanning electron microscopy,dynamic mechanical analysis and dynamic compression *** exhibited significant im pact resistance and the maximum peak stress attenuation ratio reached 73.33%.The protective equipment was made by PUmE with the optimal density of 600 kg/m^(3),and then the acceleration sensing device installed with the same protective equipment fell from a height of 3,5 and 10 m to evaluate the energy-absorbing property and reusability of *** results showed that PUmEs equipment reduced the peak acceleration of the device by 93.84%,with a maximum deviation of 9%between actual test and simulation,and shortened the impact time of first landing by 57.39%.In addition,the equipment PUmEs equipment could effectively reduce the stress on the protected items.

关键词： Polyurethane microcellular elastomer Impact velocity Stress attenuation ratio Impact resistance

Very long wave infrared quantum dot photodetector up to 18μm

在线全文

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第4期13卷 772-782页

作者： Xiaom.ng Xue Qun hao m.nglu Chen School of Optics and Photonics Beijing Institute of TechnologyBeijing 100081China. Westlake Institute for Optoelectronics FuyangHangzhou 311421China. Physics Department Changchun University of Science and TechnologyChangchun 130022China

Colloidal quantum dots(CQDs)are of interest for optoelectronic devices because of the possibility of high-throughput solution processing and the wide energy gap tunability from ultraviolet to infrared *** may question about the upper limit on the CQD wavelength *** date,although the CQD absorption already reaches terahertz,the practical photodetection wavelength is limited within mid-wave *** figure out challenges on CQD photoresponse in longer wavelength,would reveal the ultimate property on these ***’s more,it motivates interest in bottom-up infrared photodetection with less than 10%cost compared with epitaxial growth semiconductor *** this work,developing a re-growth method and ionic doping modification,we demonstrate photodetection up to 18μm wavelength on HgTe *** liquid nitrogen temperature,the responsivity reaches 0.3 A/W and 0.13 A/W,with specific detectivity 6.6×108 Jones and 2.3×109 Jones for 18μm and 10μm CQD photoconductors,*** work is a step toward answering the general question on the CQD photodetection wavelength limitation.

关键词： quantum wave ultraviolet

High-Performance and Large-Area Inverted Perovskite Solar Cells Based on NiOx Films Enabled with A Novel microstructure-Control Technology

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy & Environmental materials 2024年第1期7卷 157-163页

作者： Guibin Shen Xin Li Yuqin Zou Hongye dong dongping Zhu Yanglin Jiang Xin Ren ng Fen Lin Peter müller-Buschbaum Cheng mu Key Laboratory of Advanced Light Conversion materials and Biophotonics Department of Chemistry Renmin University of China Solar Energy Research Institute of Singapore (SERIS) National University of Singapore Physik-Department Lehrstuhl für Funktionelle Materialien Technische Universit?t München Heinz maier-Leibnitz Zentrum (mLZ) Technische Universit at München

The improvement in the efficiency of inverted perovskite solar cells（PSCs） is significantly limited by undesirable contact at the NiOx/perovskite *** this study,a novel microstructure-control technology is proposed for fabrication of porous NiOxfilms using Pluronic P123 as the structuredirecting agent and acetylacetone（AcAc） as the coordination agent.

关键词： interfacial contact inverted and large-area perovskite solar cells photovoltaic materials porous NiOX films renewable energy

Effect of different bottom blowing elements on stirring characteristics of molten bath in converter

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第2期31卷 368-376页

作者： m.ng Lv Shuang-ping Chen Hong-min Guo Yi-jie hao Xiang-dong Xing School of metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an710055ShaanxiChina Shaanxi Longmen Steel Company Hancheng715405ShaanxiChina

The bottom blowing element is the key equipment to ensure the bottom blowing effect of the *** types of bottom blowing elements,dispersive type(D1),double circular seam(D2)and straight cylinder type(D3),were built,and the effects of bottom blowing element type on molten bath flow,wall erosion and furnace bottom erosion were *** was found that when the bottom blowing elements of dispersive type(D1)and double circular seam(D2)were used,the dead zone area in the lower part of the molten bath was smaller,and the high-speed zone area was larger;therefore,the stirring effect on the bottom melt was *** the straight cylinder type(D3)bottom blowing element was used,the gas penetrated the molten bath at a faster rate to reach the surface of molten bath and failed to disperse in the bottom molten bath,and the wall shear stress near the nozzle outlet was *** argon was blown by three different bottom blowing elements,the area of the wall shear stress greater than 3 Pa was 4.8,5.6 and 8.7 cm2,respectively,within 0.2 m of the bottom blowing nozzle outlet.

关键词： Converter steelmaking Bottom blowing element molten bath stirring Wall erosion

Fabricating functionally graded Fe-Cr-Co permanent magnetic alloys via laser powder bed fusion

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第3期31卷 729-737页

作者： Ya-zhou He Ya-qing Hou Peng Shen hao Zhang dong Zhou Hang Su Central Iron and Steel Research Institute Co. Ltd.Beijing 100081China material Digital R&D Center China Iron and Steel Research Institute Group Co.Ltd.Beijing 100081China

Laser powder bed fusion(LPBF)in-situ alloying technology offers the possibility to construct gradient materials with varied structures and *** graded Fe-Cr-Co permanent magnetic alloys were fabricated by LPBF and in-situ alloying mixed powders of Fe,Cr,and Co *** effects of different Fe,Cr and Co contents on the microstructure,magnetic properties and hardness of Fe-Cr-Co alloys prepared by LPBF were *** as-built Fe-Cr-Co alloys present a single body-centered-cubic phase and have a homogeneous distribution of *** mechanical properties and magnetic properties of the compositionally graded sample show a gradient *** the increase in Cr content,the Vickers hardness of the sample increases,and the saturation magnetization of the sample *** optimal magnetic properties in an isotropic state are given as coercivity HcB=21.65 kA/m,remanence Br=0.70 T and energy product(BH)_(max)=5.35 kJ/m^(3),which are comparable to or higher than the reported magnetic properties in an isotropic state prepared by traditional powder *** in-situ alloying technology has the potential to further explore Fe-Cr-Co magnetic materials,such as those consisting of multiple or more constituent elements,and to maximize the compositional flexibility of magnetic materials.

关键词： Fe-Cr-Co alloy Laser powder bed fusion In-situ alloying Functional material magnetic property

A review of reservoir damage during hydraulic fracturing of deep and ultra-deep reservoirs

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 384-409页

作者： Kun Zhang Xiong-Fei Liu Dao-Bing Wang Bo Zheng Tun-hao Chen Qing Wang hao Bai Er-dong Yao Fu-Jian Zhou National Key Laboratory of Petroleum Resources and Engineering China University of Petroleum-BeijingBeijing102249China School of mechanical Engineering Beijing Institute of Petrochemical TechnologyBeijing102617China Tuha Downhole Operation Company CNPC Xibu Drilling Engineering Company LimitedShanshan838200XinjiangChina

Deep and ultra-deep reservoirs have gradually become the primary focus of hydrocarbon exploration as a result of a series of significant discoveries in deep hydrocarbon exploration *** reservoirs present unique challenges due to their deep burial depth(4500-8882 m),low matrix permeability,complex crustal stress conditions,high temperature and pressure(HTHP,150-200℃,105-155 mPa),coupled with high salinity of formation ***,the costs associated with their exploitation and development are exceptionally *** deep and ultra-deep reservoirs,hydraulic fracturing is commonly used to achieve high and stable *** hydraulic fracturing,a substantial volume of fluid is injected into the ***,statistical analysis reveals that the flowback rate is typically less than 30%,leaving the majority of the fluid trapped within the ***,hydraulic fracturing in deep reservoirs not only enhances the reservoir permeability by creating artificial fractures but also damages reservoirs due to the fracturing fluids *** challenging“three-high”environment of a deep reservoir,characterized by high temperature,high pressure,and high salinity,exacerbates conventional forms of damage,including water sensitivity,retention of fracturing fluids,rock creep,and proppant *** addition,specific damage mechanisms come into play,such as fracturing fluid decomposition at elevated temperatures and proppant diagenetic reactions at HTHP ***,the foremost concern in deep oil and gas development lies in effectively assessing the damage inflicted on these reservoirs by hydraulic fracturing,comprehending the underlying mechanisms,and selecting appropriate ***'s noteworthy that the majority of existing studies on reservoir damage primarily focus on conventional reservoirs,with limited attention given to deep reservoirs and a lack of systematic *** light of this,our approach entails initially summarizin

关键词： Artificial fracture Deep and ultra-deep reservoir Fracture conductivity Fracturing fluid Hydraulic fracturing Reservoir damage

Texture and Se vacancy optimization induces high thermoelectric performance in Bi_(2)Se_(3) flexible thin films

在线全文

学校读者我要写书评

暂无评论

Rare metals 2024年第6期43卷 2796-2804页

作者： dong-Wei Ao Wei-Di Liu Yue-Xing Chen Fan ma Yi-Jie Gu Zhuang-hao Zheng School of machinery and Automation Weifang UniversityWeifang 261061China Australian Institute for Bioengineering and Nanotechnology The University of QueenslandBrisbane 4072Australia Shenzhen Key Laboratory of Advanced Thin Films and Applications Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong ProvinceCollege of Physics and Optoelectronic EngineeringShenzhen UniversityShenzhen518060China School of materials Science and Engineering Inner Mongolia University of TechnologyHohhot 010051China

Bi_(2)Se_(3)-based flexible thin film with high thermoelectric performance is promising for the waste heat recovery *** this work,a novel post-selenization method is employed to prepare n-type Bi_(2)Se_(3)flexible thin films with highly textured *** strengthened texture and Se vacancy optimization can be simultaneously achieved by optimizing the selenization *** highly oriented texture leads to the increased carrier mobility and results in a high electric conductivity of~290.47 S·cm^(-1)at 623 ***,a high Seebeck coefficient(>110μW·K-1)is obtained due to the reduced carrier concentration,induced by optimizing vacancy ***,a high power factor of 3.49μW·cm^(-1)·K^(-2)at 623 K has been achieved in asprepared highly-bendable Bi_(2)Se_(3)flexible thin films selenized at 783 *** study introduces an effective post-selenization method to tune the texture structure and vacancies of Bi_(2)Se_(3)flexible thin films,and correspondingly achieves high thermoelectric performance.

关键词： Thermoelectric Bi_(2)Se_(3) Flexible thin film Post-selenization

Eco-friendly polysaccharide coatings for antifouling and dragreduction and potential application for marine devices

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第4期12卷 726-744页

作者： hao YAng Liguo QIN Wenhui Zhao Fagla Jules mAWIGNON Hui GUO Yongkang WU Yali ZHAng Guangneng dong Key Laboratory of Education ministry for modern Design and Rotor-Bearing System Institute of Design Science and Basic ComponentsSchool of Mechanical EngineeringXi’an Jiaotong UniversityXi’an 710049China Key Laboratory of Biomedical Information of ministry of Education School of Life Science and TechnologyXi’an Jiaotong UniversityXi’an 710049China Department of Endocrinology First Affiliated Hospital of Medical CollegeXi'an Jiaotong UniversityXi’an 710061China

Traditional antifouling agents usually have a certain toxic effect on marine environments and non-target *** this study,Dictyophora indusiata polysaccharide(DIP)was applied as a natural antifouling surface modifier to prepare the surface coating for marine *** DIP coatings were prepared:*** spore polysaccharide(DISP),*** volva polysaccharide(DIVP),and *** embryonic body polysaccharide(DIEP).The antifouling,tribological,and anticorrosion behavior of the coatings were *** revealed that the three kinds of DIP coatings had excellent antifouling properties,which could effectively prevent the adhesion of Chlorella and the attachment of water-based and oily stains on the ***,the coatings showed great mechanical stability and could maintain an extremely low coefficient of friction(COFng a powerful lubrication ***,the DIP coatings presented an outstanding corrosion resistance,where the equivalent circuit impedances were 4-9 orders of magnitude higher than the control *** research showed a promising prospect of surface coating fabrication with DIP for marine devices to achieve the purpose of antifouling and drag reduction.

关键词： Dictyophora indusiata polysaccharide(DIP)coating antifouling anticorrosion lubrication and drag reduction

Recent advances in vacancy engineering for reliable lithiumsulfur batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare metals 2024年第2期43卷 455-477页

作者： Wen-dong Liu Xiao Tang Jun-An Feng Chao-Yue Zhang hao Liu Chuan Shi Xiao-Xian Zhao Jian-Jun Song College of Physics School of Chemistry and Chemical EngineeringQingdao UniversityQingdao266071China Faculty of Science Centre for Clean Energy TechnologySchool of Mathematical and Physical SciencesUniversity of Technology SydneySydneyNSW2007Australia Department of Chemistry College of ScienceHebei Agricultural UniversityBaoding071001China

The high-energy-density and low-cost features endow lithium-sulfur batteries with broad application ***,many drawbacks,especially the detrimental shuttle effect,have hindered the further development of *** response,a lot of new structures have been applied to suppress the shuttle effect and promote the development of ***,vacancy engineering has gained the attention of researchers due to its unique electronic *** review aims to analyze the application of vacancy engineering in ***,the electrochemistry of LSBs has been systematically discussed and the existing challenges as well as improvement tactics of LSBs have also been ***,the preparation methods and characterization technologies of various vacancies are summarized,including oxygen vacancies,sulfur vacancies,selenium vacancies,other anion vacancies,cation vacancies,*** latest applications of vacancy engineering in LSBs are also summarized in this ***,some prospects and insights for further investigation and practical application of vacancy engineering in LSBs are put forward.

关键词： Lithium-sulfur batteries(LSBs) Defects Vacancy engineering Electronic structure Shuttle effect