检索结果-南通市图书馆

Experimental study of polyurea-coated fiber-reinforced cement boards under gas explosions

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2023年第5期23卷 201-213页

作者： Meng Gu Xiao-dong Ling An-feng Yu Guo-xin Chen Hao-zhe wang han-xiang wang State Key Laboratory of Safety and Control for Chemicals SINOPEC Research Institute of Safety Engineering Co.Ltd.Qingdao266104China College of Mechanical and Electronic Engineering China University of Petroleum(East China)Qingdao266580China

Five types of polyurea elastomers were synthesized by changing the isocyanate component and the mechanical properties of polyurea materials were measured. Fiber-reinforced cement boards(FRCB)strengthened by polyurea with different formulations were processed, and a series of experiments were carried out on the specimens with gas explosion devices. The results showed that the conventional mechanical properties of different types of polyureas had their own advantages. Based on the gas explosion overpressure criterion, the blast resistances of reinforced plates were quantitatively evaluated,and the best polyurea was selected to guide the formulation design. The three typical failure modes of polyurea-reinforced FRCBs were flexural, shear, and flexural-shear failure. Dynamic thermodynamics and shock wave spectral analysis revealed that the polyurea did not undergo a glass transition in the gas explosion tests but retained its elastic properties, allowing it to effectively wrap the fragments formed by the brittle substrates.

关键词： Polyurea Fiber-reinforced cement board Gas explosion Failure criterion Glass transition

Adaptive fault diagnosis of sucker rod pump systems based on optimal perceptron and simulation data

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2022年第2期19卷 743-760页

作者： Xiao-Xiao Lv han-xiang wang Zhang Xin Yan-Xin Liu Peng-Cheng Zhao College of Mechanical and Electrical Engineering China University of PetroleumQingdao266580China

A highly precise and timely diagnosis technology can help effectively monitor and adjust the sucker rod production system(SRPS)used in oil wells to ensure a safe and efficient *** current diagnosis method is pattern recognition of a dynamometer card(DC)based on feature extraction and *** premise of this method is that the training and target data have the same ***,the training data are collected from a field SRPS with different system parameters designed to adapt to production conditions,which may significantly affect the diagnostic *** address this issue,in this study,an improved model of the sucker rod string(SRS)is derived by adding faultparameter dimensions,with which DCs under 16 working conditions could be *** an adaptive diagnosis method is proposed by taking simulated DCs generated near the working point of the target SRPS as training ***,to further improve the accuracy of the proposed method,the DC features are improved by relative normalization and using additional features of the DC position to increase the distance between different types of *** parameters of the perceptron are optimized to promote its ***,the accuracy and real-time performance of the proposed adaptive diagnosis method are validated using field data.

关键词： Sucker rod pump Dynamometer card Adaptive fault diagnosis Sucker rod dynamics Output metering

Mechanical characteristic and failure mechanism of joint with composite sucker rod

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2023年第5期20卷 3172-3183页

作者： Yan-Wen Zhang Jia-Qi Che han-xiang wang Jin Zhang Feng Li Ming-Chao Du Yu-Ting wang College of Mechanical and Electronic Engineering China University of Petroleum(East China)Qingdao266580ShandongChina National Petroleum Corporation Offshore Engineering(Qingdao)Company Limited Qingdao266520ShandongChina Technical Testing Center of SINOPEC Shengli Oilfield Co.Dongying257088ShandongChina College of Electrical Engineering and Automation Shandong University of Science and TechnologyQingdao266590ShandongChina

Composite sucker rods are widely used in oil fields because of light weight,high strength,and corrosion *** technology becomes the primary connection method of ***,the joints with composite sucker rods are prone to debone and *** connected characteristics are less considered,so the failure mechanism of the joint is still *** on the cohesive zone model(CZM)and the Johnson-Cook constitutive model,a novel full-scale numerical model of the joint with composite sucker rod was established,and verified by pull-out *** mechanical properties and slip characteristics of the joint were studied,and the damaged procession of the joint was *** results showed that:a)the numerical model was in good agreement with the experimental results,and the error is within 5%;b)the von Mises stress,shear stress,and interface stress distributed symmetrically along the circumferential path increased gradually from the fixed end to the loading end;c)the first-bonded interface near the loading end was damaged at first,followed by debonding of the second-bonded interface,leading to the complete shear fracture of the epoxy,and resulted in the debonding of the joint with composite sucker rod,which can provide a theoretical basis for the structural design and optimization of the joint.

关键词： Joint with composite sucker rod Numerical model Connected characteristics Failure mechanism Tensile tests

Precise Planar-Twisted Molecular Engineering to Construct Semiconducting Polymers with Balanced Absorption and Quantum Yield for Efficient Phototheranostics

在线全文

学校读者我要写书评

暂无评论

Research 2024年第2期2023卷 227-238页

作者： xiang Su Zhirong Bao Wei Xie Deliang wang Ting han Dong wang Ben Zhong Tang Center for AIE Research Shenzhen Key Laboratory of Polymer Science and TechnologyGuangdong Research Center for Interfacial Engineering of Functional MaterialsCollege of Materials Science and EngineeringShenzhen UniversityShenzhen 518060China School of Biomedical and Pharmaceutical Sciences Guangdong University of TechnologyGuangzhou 510006China Department of Radiation and Medical Oncology Hubei Key Laboratory of Tumor Biological BehaviorsHubei Cancer Clinical Study CenterZhongnan Hospital of Wuhan UniversityWuhan 430071China Department of Materials Chemistry Huzhou UniversityHuzhou 313000China School of Science and Engineering Shenzhen Institute of Aggregate Science and TechnologyThe Chinese University of Hong KongShenzhenGuangdong 518172China

Semiconducting polymers(SPs)have shown great feasibility as candidates for near-infrared-II(NIR-Ⅱ)fluorescence imaging-navigated photothermal therapy due to their strong light-harvesting ability and flexible ***,the fluorescence signal of traditional SPs tends to quench in their aggregate states owing to the strongπ-πstacking,which can lead to the radiative decay pathway shutting *** address this issue,aggregation-induced emission effect has been used as a rational tactic to boost the aggregate-state fluorescence of NIR-Ⅱ*** this contribution,we developed a precise molecular engineering tactic based on the block copolymerizations that integrate planar and twisted segments into one conjugated polymer backbone,providing great flexibility in tuning the photophysical properties and photothermal conversion capacity of *** monomers featured with twisted and planar architectures,respectively,were tactfully incorporated via a ternary copolymerization approach to produce a series of new *** optimal copolymer(SP2)synchronously shows desirable absorption ability and good NIR-Ⅱquantum yield on the premise of maintaining typical aggregation-induced emission characteristics,resulting in balanced NIR-Ⅱfluorescence brightness and photothermal ***-dispersible nanoparticles fabricated from the optimal SP2 show efficient photothermal therapeutic effects both in vitro and in *** in vivo investigation reveals the distinguished NIR-Ⅱfluorescence imaging performance of SP2 nanoparticles and their photothermal ablation toward tumor with prominent tumor accumulation ability and excellent biocompatibility.

关键词： property. conducting twisted

Microstructural evolution and deformation behavior of friction stir welded twin-induced plasticity steel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 68-81页

作者： Ke Qiao Kuaishe wang Jia wang Zhengyang Hao Yating xiang Peng han Jun Cai Qi Yang Wen wang School of Metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials ProcessingXi’an University of Architecture and TechnologyXi’an 710055China Shanghai Research Institute of Materials Shanghai 200437China

The weldability of twin-induced plasticity(TWIP)steel with ultra-high strength via friction stir welding(FSW)technique was investigated,and microstructural evolution and deformation behavior of whole and micro-zones of FSW TWIP joint were studied for the first *** results showed that the content of recrystallized grains in the stir zone(SZ)increased from 10.5%of basal material(BM)to 14.2%,and that of heat affected zone(HAZ)increased to 78.6%.The percentage of annealing twins decreased from 26.8%in BM to 11%in SZ,while increased to 35%in *** with the BM,the ultimate tensile strength and yield strength of the FSW joint increased to 1036 and 550 MPa,respectively,reaching 106.7%and 110.9%of BM,*** elongation of the entire joint was 50.5%,which was lower than that of BM due to the nonuniform deformation during the tensile *** engineering strain was mainly concentrated in BM and SZ and transferred to each other during the tensile test,while the engineering strain in HAZ was always the ***,the tensile fracture occurred in the *** order of ultimate tensile strength of micro-zones in the FSW joint was as follows:HAZ>BM≈*** order of yield strength was as follows:HAZ>BM>SZ.

关键词： Twin-induced plasticity steel Friction stir welding Microstructure Mechanical property Deformation behavior

A data-driven approach to RUL prediction of tools

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Manufacturing 2024年第1期12卷 6-18页

作者： Wei Li Liang-Chi Zhang Chu-han Wu Yan wang Zhen-xiang Cui Chao Niu Department of Mechanical Engineering University College LondonLondonWC1E 7JEUK Shenzhen Key Laboratory of Cross-Scale Manufacturing Mechanics Southern University of Science and TechnologyShenzhen518055GuangdongPeople’s Republic of China SUSTech Institute for Manufacturing Innovation Southern University of Science and TechnologyShenzhen518055GuangdongPeople’s Republic of China Department of Mechanics and Aerospace Engineering Southern University of Science and TechnologyShenzhen518055GuangdongPeople’s Republic of China School of Mechanical and Manufacturing Engineering The University of New South WalesKensingtonNSW2052Australia Baoshan Iron&Steel Co. Ltd.Shanghai200941People’s Republic of China

An effective and reliable prediction of the remaining useful life(RUL)of a tool is important to a metal forming process because it can significantly reduce unexpected maintenance,avoid machine shutdowns and increase system *** study proposes a new data-driven approach to the RUL prediction for metal forming processes under multiple contact sliding *** data-driven approach took advantage of bidirectional long short-term memory(BLSTM)and convolutional neural networks(CNN).A pre-trained lightweight CNN-based network,WearNet,was re-trained to classify the wear states of workpiece surfaces with a high accuracy,then the classification results were passed into a BLSTM-based regression model as inputs for RUL *** experimental results demonstrated that this approach was able to predict the RUL values with a small error(below 5%)and a low root mean square error(RMSE)(around 1.5),which was more superior and robust than the other state-of-the-art methods.

关键词： Remaining useful life(RUL) Bidirectional long short-term memory(BLSTM) Data-driven approach Metal forming

Geochemistry and origins of hydrogen-containing natural gases in deep Songliao Basin,China:Insights from continental scientific drilling

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 741-751页

作者： Shuang-Biao han Chao-han xiang Xin Du Lin-Feng Xie Jie Huang Cheng-Shan wang College of Geoscience and Surveying Engineering China University of Mining and TechnologyBeijing100083China State Key Laboratory of Biogeology and Environmental Geology China University of GeosciencesBeijing100083China

The different reservoirs in deep Songliao Basin have non-homogeneous lithologies and include multiple layers with a high content of hydrogen *** gas composition and stable isotope characteristics vary significantly,but the origin analysis of different gas types has previously been *** on the geochemical parameters of gas samples from different depths and the analysis of geological settings,this research covers the diverse origins of natural gas in different *** gas components are mainly methane with a small amount of C_(2+),and non-hydrocarbon gases,including nitrogen(N_(2)),hydrogen(H_(2)),carbon dioxide(CO_(2)),and helium(He).At greater depth,the carbon isotope of methane becomes heavier,and the hydrogen isotope points to a lacustrine sedimentary *** increasing depth,the origins of N_(2)and CO_(2)change gradually from a mixture of organic and inorganic to *** origins of hydrogen gas are complex and include organic sources,water radiolysis,water-rock(Fe^(2+)-containing minerals)reactions,and *** shales of Denglouku and Shahezi Formations,as source rocks,provide the premise for generation and occurrence of organic ***,the deep faults and fluid activities in Basement Formation control the generation and migration of mantle-derived *** discovery of a high content of H_(2)in study area not only reveals the organic and inorganic association of natural-gas generation,but also provides a scientific basis for the exploration of deep hydrogen-rich gas.

关键词： Gas compositions Stable isotopes Gas origins Hydrogen gas Songliao Basin

Transcriptome analysis suggests broad jejunal alterations in Linghu’s obesity-diarrhea syndrome:A pilot study

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2024年第21期30卷 2777-2792页

作者： Xiao-Tong Niu xiang-Yao wang Yan wang Ke han Nan Ru Jing-Yuan xiang En-Qiang Linghu Medical School of Chinese PLA Chinese PLA General HospitalBeijing 100853China Department of Gastroenterology The First Medical Center of Chinese PLA General HospitalBeijing 100853China School of Medicine Nankai UniversityTianjin 300071China

BACKGROUND Obesity is associated with a significantly increased risk for chronic diarrhea,which has been proposed as Linghu’s obesity-diarrhea syndrome(ODS);however,its molecular mechanisms are largely *** To reveal the transcriptomic changes in the jejunum involved in *** In a cohort of 6 ODS patients(JOD group),6 obese people without diarrhea(JO group),and 6 healthy controls(JC group),high-throughput sequencing and bioinformatics analyses were performed to identify jejunal mucosal mRNA expression alterations and dysfunctional biological *** another cohort of 16 ODS patients(SOD group),16 obese people without diarrhea(SO group),and 16 healthy controls(SC group),serum diamine oxidase(DAO)and D-lactate(DLA)concentrations were detected to assess changes in intestinal barrier *** The gene expression profiles of jejunal mucosa in the JO and JC groups were similar,with only 1 differentially expressed gene(DEG).The gene expression profile of the JOD group was significantly changed,with 411 DEGs compared with the JO group and 211 DEGs compared with the JC group,129 of which *** enrichment analysis of these DEGs showed that the biological processes such as digestion,absorption,and transport of nutrients(especially lipids)tended to be up-regulated in the JOD group,while the biological processes such as rRNA processing,mitochondrial translation,antimicrobial humoral response,DNA replication,and DNA repair tended to be down-regulated in the JOD *** DEGs(CDT1,NHP2,EXOSC5,EPN3,NME1,REG3A,PLA2G2A,and PRSS2)may play a key regulatory role in the pathological process of ODS,and their expression levels were significantly decreased in ODS patients(Phan in the SO group(P<0.001).CONCLUSION Compared with health

关键词： Obesity Chronic diarrhea Jejunum Transcriptome Intestinal barrier

Privacy Protection for Blockchain-Based Healthcare IoT Systems:A Survey

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第8期11卷 1757-1776页

作者： Minfeng Qi Ziyuan wang Qing-Long han Jun Zhang Shiping Chen Yang xiang the School of Science Computing and Engineering Technologies Swinburne University of Technology the Faculty of Data Science City University of Macau School of Science Computing and Engineering Technologies Swinburne University of Technology IEEE CSIRO Data61

To enable precision medicine and remote patient monitoring, internet of healthcare things(IoHT) has gained significant interest as a promising technique. With the widespread use of IoHT, nonetheless, privacy infringements such as IoHT data leakage have raised serious public concerns. On the other side, blockchain and distributed ledger technologies have demonstrated great potential for enhancing trustworthiness and privacy protection for IoHT systems. In this survey, a holistic review of existing blockchain-based IoHT systems is conducted to indicate the feasibility of combining blockchain and IoHT in privacy protection. In addition, various types of privacy challenges in IoHT are identified by examining general data protection regulation(GDPR). More importantly, an associated study of cutting-edge privacy-preserving techniques for the identified IoHT privacy challenges is presented. Finally, several challenges in four promising research areas for blockchain-based IoHT systems are pointed out, with the intent of motivating researchers working in these fields to develop possible solutions.

关键词： Blockchains Privacy Internet of Things Data privacy Monitoring Medical services Biomedical monitoring