检索结果-南通市图书馆

Quantitative analysis of uranium in electrorecovery salt of pyroprocessing using laser-induced breakdown spectroscopy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Plasma Science and Technology 2021年第5期23卷 96-103页

作者： seul-Ki han Se-Hwan PARK Seong-Kyu AHN Korea Atomic Energy Research Institute Yuseong-guDaejeon 34057Republic of Korea Korea Institute of Industrial Technology Yeonsu-guIncheon21999Republic of Korea

The amounts of nuclear materials in the Li Cl-KCl salt in pyroprocessing have to be analyzed to prevent the diversion of the nuclear *** alternative method to the chemical analysis has been pursued,and laser-induced breakdown spectroscopy(LIBS)is one *** the present work,an in situ and quantitative analysis method of electro-recovery(ER)salt was proposed and demonstrated by using LIBS combined with dipstick *** types of simulated salt samples were prepared:ER salt sample and salt obtained from the dipstick sampling,and pulsed neodymium-doped yttrium aluminum garnet(Nd:YAG)laser with a wavelength of 532 nm was focused on the salt to generate *** plasma emission was measured by using an Echelle spectrometer with a resolution of 0.01 nm in conjunction with an Intensified Charge-Coupled Detector *** U and other rare earth peaks in the spectra were *** best Limit of Detection and Root Mean Square Error of Calibration of U were 38 ppm and 0.0203 wt%,*** work shows that the U in the pyroprocessing ER salt can be monitored with LIBS.

关键词： LIBS uranium LOD RMSEC

Uranium measurements using laser-induced breakdown spectroscopy in lithium chloride-potassium chloride salt of pyroprocessing

在线全文

学校读者我要写书评

暂无评论

Plasma Science and Technology 2020年第7期22卷 110-115页

作者： seul-Ki han Se-Hwan PARK Seong-Kyu AHN Korea Atomic Energy Research Institute Yuseong-guDaejeon 34057Republic of Korea

In pyroprocessing,uranium(U) is recovered from molten LiCl-KCl salt,and,for safeguard purposes,it is important to analyze the U and Plutonium(Pu) concentrations in a timely *** the present work,salt samples containing U were *** laser used in the present work was an Nd:YAG laser with a wavelength of 532 nm,a laser energy on the sample of11.5 mJ,and a pulse repetition rate of 10 *** plasma emission light was measured with an Echelle spectrometer.A total of 100 points on the sample surface were measured as the laser incident position was *** U and potassium(K) peaks in the spectrum were *** and multivariate analyzes were conducted to determine the accuracy and limit of detection(LOD) of the laser-induced breakdown spectroscopy.

关键词： LIBS uranium(U) safeguards LOD

Customized lipid-coated magnetic mesoporous silica nanoparticle doped with ceria nanoparticles for theragnosis of intracerebral hemorrhage

在线全文

学校读者我要写书评

暂无评论

Nano Research 2018年第7期11卷 3582-3592页

作者： Bong Geun Cha han-Gil Jeong Dong-Wan Kang Myong-Joo Nam Chi Kyung kim Do Yeon kim In-Young Choi seul Ki Ki Song I kim Ju hee han Jaeyun kim Seung-Hoon Lee School of Chemical Engineering Sungkyunkwan University Suwon 16419 Republic of Korea Department of Laboratory of Innovative Nanobiotechnology Biomedical Research Institute Seoul National University Hospital 101 Daehak-ra Jongno-gu Seou103080 Republic of Korea Department of Neurology Seoul National University Hospital 101 Daehak-ro Jongno-gu Seou103080 Republic of Korea Department of Neurology Korea University Guro Hospital and Korea University College of Medicine Seoul 08308 Republic of Korea Department of Health Sdences and Technology Samsung Advanced Institute for Health Science & Technology (SAIHST) Sungkyunkwan University Suwon 16419 Republic of Korea Biomedical Institute for Convergence at SKKU (BICS) Sungkyunkwan University Suwon 16419 Republic of Korea

Intracerebral hemorrhage （ICH）, caused by the sudden rupture of an artery within the brain, is a devastating subtype of stroke, which currently has no effective treatment. Intense inflammatory reactions that occur in the peri-hematomal area after ICH are more deleterious than the hematoma itself, resulting in subsequent brain edema and neurologic deterioration. Thus, we developed lipid-coated magnetic mesoporous silica nanoparticles doped with ceria nanoparticles （CeNPs）, abbreviated as LMCs, which have both potent anti-inflammatory therapeutic effects via scavenging reactive oxygen species and help in increasing the efficacy of magnetic resonance imaging enhancement in the peri-hematomal area. LMCs consist of mesoporous silica nanopartide-supported lipid bilayers, which are loaded with large amounts of CeNPs for scavenging of reactive oxygen species, and iron oxide nanoparticles for magnetic resonance imaging contrast. LMCs loaded with CeNPs exhibited strong anti-oxidative and anti-inflammatory activities in vitro. In the rodent ICH model, intracerebraUy injected LMCs reached the peri-hematomal area and were engulfed by macrophages, which were clearly visualized by magnetic resonance imaging of the brain. Moreover, LMCs reduced inflammatory macrophage infiltration, and thus significantly reduced brain edema. Finally, LMC treatment markedly improved neurologic outcomes of the animals with ICH. Thus, LMC is the first nanobiomaterial that successfully showed theragnostic effects in ICH.

关键词： magnetic mesoporous silica nanoparticle ceria nanoparticles intracerebral hemorrhage reactive oxygen species therapeutics imaging

Amine functionalization on thermal and mechanical behaviors of graphite nanofibers-loaded epoxy composites

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2023年第20期151卷 80-88页

作者： Seong-Hwang kim Sang-Jin Park seul-Yi Lee Soo-Jin Park Department of Chemistry Inha University100 InharoIncheon 22212the Republic of Korea

With the growing demand for faster and more powerful computing,effective heat dissipation is essential to ensure the longevity,reliability,and high performance of electronic *** the field of modern electronic packaging materials,there is a great need for graphitic material-loaded polymeric composites(GPCs)with excellent thermal ***,the enhancement efficiency of GPCs is hindered by the agglomeration of fillers and the interfacial thermal resistance caused by the lack of continuous thermally conductive pathways between the filler and *** the interfaces between filler and matrix is of great importance in optimizing the performances of ***,we fabricated graphite nanofibers(GNF)-loaded nanocomposites using acid-functionalized GNF(AGNF)and acidtetraethylenepentamine-functionalized(TGNF)as a filler and epoxy resin as a matrix with different GNF loading contents to explore the interfacial properties of the *** optimal GNF loading for AGNF was 0.5 wt.%,while the TGNF showed 0.75 wt.%.The highest thermal conductivity(0.51 W m^(−1) K^(−1))and fracture toughness(25.8 MPa m^(1/2))values were found in the TGNF-loaded nanocomposites with a fraction of 0.75 wt.%,representing enhancements of∼145%and∼400%,respectively,compared to those of neat *** experimental data presented herein demonstrate that the interfacial properties play a significant role in enhancing the thermal and mechanical performances of the *** present approach is expected to serve as a valuable tool in the design of conductive polymeric nanocomposites for further practical applications,such as thermal interface materials and packaging of high-power electric devices.

关键词： Graphite nanofiber Nanocomposites Interfacial interaction Thermal conductivity Fracture resistance

A facile synthesis of hierarchical Sn3O4 nanostructures in an acidic aqueous solution and their strong visible- light-driven photocatalytic activity

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2015年第11期8卷 3553-3561页

作者： Hui Song Su-Young Son seul Ki kim Gun Young Jung School of Materials Science and Engineering Gwangju Institute of Science and Technology (GIST) Gwangju 500-712 Republic of Korea Carbon Convergence Materials Research Center Institute of Advanced Composite Materials Korea Institute of Science and Technology (KIST) Jeollabuk-do 565-905 Republic of Korea

Hierarchical tin（Ⅲ） oxide, Sn3O4, nanospheres were synthesized via hydrothermal reaction under strongly acidic ambient conditions. The morphology of Sn3O4 varied with decreasing pH. The prickly SnaO4 nanospheres changed into SnaO4 nanospheres covered with single-crystalline nanoplates having a high BET surface area of ca. 55.05 m^2·g^-1 and a band gap of ca. 2.25 eV. Small amounts （0.05 g） of the hierarchical Sn3O4 nanostructures completely decomposed a 30% methyl orange （MO） solution in 100 mL deionized water within 15 min under one sun condition （UV ＋ visible light）. The Sn3O4 photocatalyst exhibited a fast decomposition rate of 1.73 ×10^-1 min^-1, which is a 90.86% enhancement relative to that of the commercially available P25 photocatalyst. The high photocatalytic activity of the hierarchical Sn3O4 nanostructures is attributed to its ability to absorb visible light and its high surface-to-volume ratio.

关键词： Sn3O4 hierarchical structure hydrothermal morphology engineering photocatalyst

Highly Flexible Fabrics/Epoxy Composites with Hybrid Carbon Nanofillers for Absorption-Dominated Electromagnetic Interference Shielding

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2022年第11期14卷 307-323页

作者： Jong-Hoon Lee Yoon-Sub kim Hea-Jin Ru seul-Yi Lee Soo-Jin Park Department of Chemistry Inha University100 InharoIncheon 22212Korea Korea Architecture Safety Testing and Research Institute(KASTI) 88 Gasan Digital 1-roSeoul 08590Korea

Epoxy-based nano-composites can be ideal electromagnetic interference(EMI)-shielding materials owing to their lightness,chemical inertness,and mechanical ***,poor conductivity and brittleness of the epoxy resin are challenges for fast-growing portable and flexible EMI-shielding applications,such as smart wristband,medical cloth,aerospace,and military *** this study,we explored hybrid nanofillers of single-walled carbon nanotubes(SWCNT)/reduced graphene oxide(rGO)as conductive inks and polyester fabrics(PFs)as a substrate for flexible EMI-shielding *** highest electrical conductivity and fracture toughness of the SWCNT/rGO/PF/epoxy composites were 30.2 S m^(−1)and 38.5 MPa m^(1/2),which are~270 and 65%enhancement over those of the composites without SWCNTs,*** mechanical durability was demonstrated by stable electrical conductivity retention during 1000 cycles of bending *** EMI-shielding effectiveness of~41 dB in the X-band frequency of 8.2-12.4 GHz with a thickness of 0.6 mm was obtained with an EM absorption-dominant behavior over a 0.7 absorption *** results are attributed to the hierarchical architecture of the macroscale PF skeleton and nanoscale SWCNT/rGO networks,leading to superior EMI-shielding *** believe that this approach provides highly flexible and robust EMI-shielding composites for next-generation wearable electronic devices.

关键词： Conductive polymer composites Fracture toughness Flexible composites Absorption-dominated electromagnetic interference shielding

Interfacial Behaviors of Basalt Fiber‑Reinforced Polymeric Composites: A Short Review

在线全文

学校读者我要写书评

暂无评论

Advanced Fiber Materials 2022年第6期4卷 1414-1433页

作者： Seong‑Hwang kim Jong‑Hoon Lee Jong‑Woo kim seul‑Yi Lee Soo‑Jin Park Department of Chemistry Inha University100 InharoIncheon 22212South Korea

Basalt fibers(BFs)have emerged as a promising thermal insulation material for various applications,such as fireproof clothes/walls and protective equipment in military and civil *** have many desirable characteristics,such as low thermal conductivity,excellent flame resistance,exceptional mechanical strength,facile manipulability,environmental friendliness,and ***,the low intrinsic interfacial properties of BFs due to their chemical inertness and macro-scaled sizes have been a challenge for high performance of BFs-reinforced polymeric composites(BFRPs).Since the mechanical properties of BFRPs significantly depend on the interfacial interaction between the fibers and the matrix,it is critical to understand how incorporating BFs influences the properties of the *** this end,the aim of this review is to report on recent research progress with emphasis on the interfacial behavior in *** relationships between the fiber–matrix interfacial adhesion and the mechanical properties of the BFRPs are briefly described with systematic and up-to-date surface modification techniques summarized into two categories:surface modifications(“wet”and“dry”)and multi-scaled ***,several strategies for increasing the interfacial adhesion of BFs within the polymeric matrix to provide new ideas and insight for future research on the BFRPs are discussed.

关键词： Basalt fibers Polymeric matrix Surface modification Interface

A Review on Interface Engineering of MXenes for Perovskite Solar Cells

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2023年第8期15卷 270-308页

作者： Srikanta Palei G.Murali Choong‑Hee kim Insik In seul‑Yi Lee Soo‑Jin Park Department of Chemistry Inha University100 InharoIncheon 22212South Korea Department of Polymer Science and Engineering Department of IT‑Energy Convergence(BK21 Four)Chemical Industry InstituteKorea National University of TransportationChungju 27469South Korea

With an excellent power conversion efficiency of 25.7%,closer to the Shockley–Queisser limit,perovskite solar cells(PSCs)have become a strong candidate for a next-generation energy ***,the lack of stability and reliability in PSCs remained challenging for ***,such as interfacial and structural engineering,have a more critical influence on enhanced ***,two-dimensional materials,have emerged as promising materials in solar cell applications due to their metallic electrical conductivity,high carrier mobility,excellent optical transparency,wide tunable work function,and superior mechanical *** to different choices of transition elements and surface-terminating functional groups,MXenes possess the feature of tuning the work function,which is an essential metric for band energy alignment between the absorber layer and the charge transport layers for charge carrier extraction and collection in ***,adopting MXenes to their respective components helps reduce the interfacial recombination resistance and provides smooth charge transfer paths,leading to enhanced conductivity and operational stability of *** review paper aims to provide an overview of the applications of MXenes as components,classified according to their roles as additives(into the perovskite absorber layer,charge transport layers,and electrodes)and themselves alone or as interfacial layers,and their significant importance in PSCs in terms of device performance and ***,we discuss the present research status and future directions toward its use in PSCs.

关键词： MXenes Perovskite solar cells Additives Interfacial layer Electrodes

Microstructure and texture evolution of Ti-Nb-Si based alloys for biomedical applications

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2006年第Z2期25卷 163-167页

作者： kim Won-Yong kim han-Sol Advanced Materials R&D Division Korea Institute of Industrial Technology Incheon 406-130 Korea

Microstructure and texture of Ti-Nb-Si based alloys, prepared by water quenching from β-phase field, cold rolling and recrystallization heat treatment followed by water quenching, were investigated in terms of optical microstructure and analysis of X-ray pole figure result. In as-quenched sample, relatively random distribution of pole figure was detected without showing a specific texture component. In as-cold rolled sample, however, it is found well-developed several texture components consisting of rotated cube, α-fiber and γ-fiber texture components which are frequently observed in bcc-structured metals and alloys were found. Therefore, texture components developed in the present alloys are closely related to the deformation of β-phase even though small amount of α″ phase co-exist in the microstructure. In recrystallized sample, α-fiber texture component is weakly detected while the other texture components, rotated cube and γ-fiber components, appears to be relatively unchanged. No additional texture components were detected besides those texture components observed in the cold rolled samples.

关键词： Ti-Nb-Si based alloys microstructure texture